secluded/blog.org

908 lines
44 KiB
Org Mode
Raw Normal View History

#+HUGO_BASE_DIR: ./
#+HUGO_SECTION: posts
#+HUGO_AUTO_SET_LASTMOD: t
2021-04-11 16:53:27 +00:00
* Meta :@Meta:
* Technology :@Technology:
2021-05-16 05:08:58 +00:00
** TODO Audacity and the telemetry pull request
:PROPERTIES:
:EXPORT_FILE_NAME: audacity-and-the-telemetry-pull-request
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :toc true
:END:
Five days ago at the time of writing, [[https://github.com/crsib][Dmitry Vedenko]] opened a Pull
Request (PR) in [[https://github.com/audacity/audacity/pull/835][Audacity's GitHub repository]] entitled [[https://github.com/audacity/audacity/pull/835][/Basic telemetry
for the Audacity/.]] About two days later, all hell broke loose. That PR
now has over 3.3 thousand downvotes and more than one thousand comments
from nearly 400 individuals. I started reading the posts shortly after
they began and kept up with them over the following days, reading every
single new post. I recognise that few people are going to feel like
wading through over 1k comments so this is my attempt to provide a
summary of the PR itself using the community's code reviews along with a
summary of the various opinions conveyed in the comments.
When I reference comments, I'll provide a footnote that includes a link
to the comment and a link to a screenshot just in case it's removed or
edited in the future.
*** Audacity's acquisition
I haven't been able to find /much/ information in this area so forgive me
if I'm scant on details.
On 30 April, a company called [[https://mu.se/][Muse Group]] acquired [[https://www.audacityteam.org/][Audacity]]. According to
[[https://mu.se][their website]], Muse is the parent company behind many musical
applications and tools. It was founded by Eugeny Naidenov just days
before it acquired Audacity. Before all of this, Eugeny Naidenov founded
[[https://www.ultimate-guitar.com/][Ultimate Guitar]] (UG) in 1998. The service grew rather quickly and now
has over 300 million users. UG acquired [[https://deanzelinsky.com/][Dean Zelinsky Guitars]] in 2012,
[[http://agilepartners.com/][Agile Partners]] in 2013, [[https://musescore.org/][MuseScore]] in 2017, and [[http://trycrescendo.com/][Crescendo]] in 2018. Muse
Group was established in 2021 and it seems as if all of the services UG
acquired were (or will be) transferred to Muse Group, as well as UG
itself. Immediately following its establishment, Muse not only acquired
Audacity but also [[https://www.staffpad.net/][StaffPad]].
I say 30 April because that's when Muse published their [[https://mu.se/newsroom/tpost/6dhedma301-muse-group-acquires-audacity-expanding-c][press release]]
and when Martin Keary (Tantacrul) published a video entitled [[https://www.youtube.com/watch?v=RMWNvwLiXIQ][/Im now in
charge of Audacity. Seriously./]] According to his comment,[fn:17] Martin
will help with proposing Audacity's roadmap and many of its future
features as well as working with the community. This has been his role
with MuseScore since he joined that project and he will be continuing it
here.
~-----BEGIN PERSONAL OPINION-----~
Looking at [[https://www.martinkeary.com/][his website,]] I also suspect he will play a large role in
redesigning Audacity's interface. Considering that he was instrumental
in designing [[https://www.martinkeary.com/#/ubuntu-touch-os/][the best mobile interface I've ever had the absolute
pleasure of experiencing,]] I have high hopes that this is the case.
~------END PERSONAL OPINION------~
*** Telemetry implementation
**** Implementation Basics
A few days after the acquisition, a PR was opened that adds /Basic
telemetry for the Audacity/. This implementation collects "application
opened" events and sends those to Yandex to estimate the number of
Audacity users. It also collects session start and end events, errors
for debugging, file used for import and export, OS and Audacity
versions, and the use of effects, generators, and analysis tools so they
can prioritise future improvements. Sending this data would be optional
and the user would be presented with a dialogue the first time they
launch the application after installation or after they update to the
including release. This description was mostly copied directly from [[https://github.com/audacity/audacity/pull/835#issue-629891447][the
PR description itself.]]
**** Frontend Implementation
This is fairly straightforward and a pretty standard UI for prompting
users to consent to analytics and crash logging. This section is
included because the community has strong opinions regarding the
language used and its design, but that will be discussed later. The
screenshot below is copied directly from the PR.
[[/assets/pngs/audacity-pr/consentdialogue.png]]
**** Backend Implementation
Many of the code reviews include the reviewer's personal opinion so I
will summarise the comment, provide the code block in question, and link
directly to the comment in a footnote.[fn:9]
#+BEGIN_SRC c
if (!inputFile.Write (wxString::FromUTF8 (ClientID + "\n")))
return false;
#+END_SRC
[[https://github.com/crsib/audacity/blob/c9264d2478fe2af82aeb6e2a0295b00b3a27ce53/libraries/lib-telemetry/TelemetryManager.cpp#L199-L200][Lines 199-200 of TelemetryManager.cpp]] save the user's unique client ID
to a file.[fn:8] This allows the analytics tool (in this case, Google
Analytics) to aggregate data produced by a single user.
#+BEGIN_SRC c
def_vars()
set( CURL_DIR "${_INTDIR}/libcurl" )
set( CURL_TAG "curl-7_76_0")
#+END_SRC
[[https://github.com/crsib/audacity/blob/c9264d2478fe2af82aeb6e2a0295b00b3a27ce53/cmake-proxies/libcurl/CMakeLists.txt#L3-L6][Lines 3-6 of CMakeLists.txt]] "vendor in" libcurl.[fn:10] This is when an
application directly includes sources for a utility rather than making
use utilities provided by the system itself.
#+BEGIN_SRC c
ExternalProject_Add(curl
PREFIX "${CURL_DIR}"
INSTALL_DIR "${CURL_DIR}"
GIT_REPOSITORY https://github.com/curl/curl
GIT_TAG ${CURL_TAG}
GIT_SHALLOW Yes
CMAKE_CACHE_ARGS ${CURL_CMAKE_ARGS}
)
#+END_SRC
[[https://github.com/crsib/audacity/blob/c9264d2478fe2af82aeb6e2a0295b00b3a27ce53/cmake-proxies/libcurl/CMakeLists.txt#L29-L36][Lines 29-36 of CMakeLists.txt]] add curl as a remote dependency.[fn:11]
This means that the machine building Audacity from its source code has
to download curl during that build.
#+BEGIN_SRC c
S.Id (wxID_NO).AddButton (rejectButtonTitle);
S.Id (wxID_YES).AddButton (acceptButtonTitle)->SetDefault ();
#+END_SRC
[[https://github.com/crsib/audacity/blob/c9264d2478fe2af82aeb6e2a0295b00b3a27ce53/src/telemetry/TelemetryDialog.cpp#L93-L94][Lines 93-94 of TelemetryDialog.cpp]] add buttons to the dialogue asking
the user whether they consent to data collection.[fn:12] ~SetDefault~
focuses the button indicating that the user does consent. This means
that if the user doesn't really look at the dialogue and presses
Spacebar or Enter, or if they do so accidentally by simply bumping the
key, they unintentionally consent to data collection. If the user
desires, this can later be changed in the settings menu. However, if
they weren't aware what they were consenting to /or that they did
consent/, they won't know to go back and opt out.
There are other problems with the code that include [[https://github.com/audacity/audacity/pull/835#discussion_r628816050][simple mistakes,]]
[[https://github.https://github.com/audacity/audacity/pull/835#discussion_r628774985][styling that's inconsistent with the rest of the project,]] [[https://github.com/audacity/audacity/pull/835#discussion_r628500849][unhandled
return values resulting in skewed data,]] [[https://github.com/audacity/audacity/pull/835#discussion_r628792423][use of inappropriate functions,]]
and [[https://github.com/audacity/audacity/pull/835#discussion_r628818054][spelling errors in the comments.]] I believe these are less important
that those above so they won't be discussed.
*** Community opinions
There were many strong opinions regarding both the frontend and backend
implementations of this PR, from the wording of the dialogue and
highlighting the consent button to devices running something other than
Windows and macOS not being able to send telemetry and thus skewing the
data that /was/ collected.
**** Opinions on the frontend
Really, the only frontend here is the consent dialogue. However, there
are /many/ comments about it, the most common of which is probably that
the wording is not only too vague[fn:13] but also inaccurate[fn:14]. The
assertion that Google Analytics are not anonymous and any data sent can
be trivially de-anonymised (or de-pseudonymised) is repeated many times
over. Below are a few links to comments stating such. I searched for the
term /"anonymous"/, copied relevant links, and stopped when my scrollbar
reached halfway down the page.
- [[https://github.com/audacity/audacity/pull/835#discussion_r628156527][r628156527]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-833969780][833969780]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-833969933][833969933]]
- [[https://github.com/audacity/audacity/pull/835#discussion_r627995927][r627995927]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834358022][834358022]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834377549][834377549]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834382007][834382007]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834385463][834385463]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834405825][834405825]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834531779][834531779]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834546874][834546874]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834638000][834638000]]
The next most pervasive comment is regarding the consent buttons at the
bottom of the dialogue where users opt in or out.[fn:15] Many individuals call
this design a /dark pattern/. Harry Brignull, a UX specialist focusing on
deceptive interface practises, describes dark patterns as [[https://www.darkpatterns.org/][/tricks used
in websites and apps that make you do things that you didn't mean to/.]]
The dark pattern in this situation is the opt-in button being
highlighted. Many community members assert that users will see the big
blue button and click it without actually reading the dialogue's
contents. They just want to record their audio and this window is a
distraction that prevents them from doing so; it needs to get out of the
way and the quickest way to dismiss it is clicking that blue button.
Below is a list of some comments criticising this design.
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834286641][834286641]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834358022][834358022]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834399813][834399813]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834479968][834479968]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-835250737][835250737]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-835253882][835253882]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-835291066][835291066]]
- [[https://github.com/audacity/audacity/pull/835#issuecomment-835445481][835445481]]
Another issue that was brought up by a couple of individuals was the
lack of a privacy policy.[fn:16] The consent dialogue links to one, but, at the
time of writing, one does not exist at [[https://www.audacityteam.org/contact/privacy-policy/][the provided URL.]] I have [[https://web.archive.org/web/20210510012924/https://www.audacityteam.org/contact/privacy-policy/][archived
the state of the page]] in case that changes in the future.
**** Opinions on the backend
#+BEGIN_SRC c
if (!inputFile.Write (wxString::FromUTF8 (ClientID + "\n")))
return false;
#+END_SRC
The issue many individuals take with this snippet is saving the
~ClientID~. Say an individual has an odd file that causes Audacity to
crash any time they try to open it. Say they attempt to open it a
hundred times. Without giving the client a unique ID, it could look like
there are 100 people having an issue opening a file instead of just the
one. However, by virtue of each installation having an entirely unique
ID, this telemetry /is not anonymous/. Anonymity would be sending
statistics in such a way that connecting those failed attempts to a
single user would be impossible. At best, this implementation is
/pseudonymous/ because the client is given a random ID, you don't have to
sign in with an account or something.
#+BEGIN_SRC c
def_vars()
set( CURL_DIR "${_INTDIR}/libcurl" )
set( CURL_TAG "curl-7_76_0")
#+END_SRC
Timothe Litt's comment gives a good description of why "vendoring in"
libcurl is a bad idea[fn:19] and Tyler True's comment gives a good
overview of the pros and cons of doing so.[fn:18] Many people take issue
with this /specifically/ because it's libcurl. Security flaws in it are
/very/ common and Audacity's copy would need to be /manually/ kept up to
date with every upstream release to ensure none of its vulnerabilities
can be leveraged to compromise users. If the Audacity team was going to
stay on top of all of the security fixes, they would need to release a
new version every week or so.
#+BEGIN_SRC c
ExternalProject_Add(curl
PREFIX "${CURL_DIR}"
INSTALL_DIR "${CURL_DIR}"
GIT_REPOSITORY https://github.com/curl/curl
GIT_TAG ${CURL_TAG}
GIT_SHALLOW Yes
CMAKE_CACHE_ARGS ${CURL_CMAKE_ARGS}
)
#+END_SRC
The problem with downloading curl at build-time is that it's simply
disallowed for many Linux- and BSD-based operation systems. When a
distribution builds an application from source, its build dependencies
are often downloaded ahead of time and, as a security measure, the build
machine is cut off from the internet to prevent any interference.
Because this is disallowed, the build will fail and the application
won't be available on those operation systems.
Note, however, that these build machines would have the option to
disable telemetry at build-time. This means the machine wouldn't attempt
to download curl from GitHub and the build would succeed but, again,
telemetry would be disabled for anyone not on Windows or macOS. This
defeats the whole purpose of adding telemetry in the first place.
#+BEGIN_SRC c
S.Id (wxID_NO).AddButton (rejectButtonTitle);
S.Id (wxID_YES).AddButton (acceptButtonTitle)->SetDefault ();
#+END_SRC
There was a lot of feedback about the decision to highlight the consent
button but that was mentioned up in the frontend section; I won't rehash
it here.
**** Broader and particularly well-structured comments
These are simply some comments I feel deserve particular attention.
From SndChaser...
- [[https://github.com/audacity/audacity/pull/835#issuecomment-834037351][834037351]]
-
*** The Audacity team's response
*** My opinions
Can't decide whether to include this section or not. If you make it all
the way down here, let me know what you think.
2021-05-23 15:21:41 +00:00
** TODO Catchy title about Supernote being "the new paper" :Supernote:Writing:Productivity:Organisation:
:PROPERTIES:
:EXPORT_FILE_NAME: something-about-supernote
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :toc true
:END:
I like writing things down. I like the feel of the pen (preferably a
fountain pen) glide smoothly over the paper, that nice solid feeling of
the tip against the table, seeing the ink dry as it flows from the nib,
accidentally swiping my hand through it before it's finished and
smearing a bit of ink across the page, cursing under my breath as I dab
it up with a handkerchief or a napkin or something else nearby. I also
love that writing things by hand [[https://journals.sagepub.com/doi/abs/10.1177/0956797614524581][has an impact on memory and improves
retention]].
*** The problem
Unfortunately, I don't love keeping up with that paper. Across many
different classes, even with dedicated folders for each one, something
important inevitably gets lost. Notebooks are also bulky and can take up
a lot of space. I tried [[https://bulletjournal.com/][bullet journalling]] for about a month earlier
this year and, while the process was enjoyable, the maintenance was not.
My brain moves faster than my pen (even though I have terrible
handwriting) and I inevitably forget letters or even whole words. This
is a problem while writing in pen because white-out looks ugly and I
dislike wasting whole pages because of a couple mistakes.
The obvious solution here is to get an iPad with an Apple Pen, right?
Right??
Wrong because Apple bad[fn:2].
*** The solution
Enter the world of ... what are they even called? E-ink notebooks? Paper
tablets? E-R/W[fn:1]? Do they even have a "device category" yet? I don't
know but they solve my problem in a wonderful way.
As the names suggest, these are devices that can /usually/ open and read
e-books (EPUBs, PDFs, etc.), annotate them, and create standalone pages
of notes as if they were full notebooks. The most well-known of these
devices is likely the [[https://remarkable.com/][reMarkable]]. They had a [[https://venturebeat.com/2019/10/08/remarkable-raises-15-million-to-bring-its-e-paper-tablets-to-more-scribblers/][hugely successful
crowdfunding campaign]] and produced the reMarkable 1, followed by [[https://blog.remarkable.com/remarkable-2-the-next-generation-paper-tablet-91b47d0080cb][the
reMarkable 2 in 2020]]. There are a few others by now but we'll look at
the reMarkable first.
*** The reMarkable
This device boasts all of the features I was looking for. It renders
digital content, from books and manuals to comics and light novels,
allows you to mark those documents up as you would if it were physical
media, create full notebooks of hand written text, organise them,
search, and, if your handwriting is legible enough (mine certainly is
not), perform OCR on your notes and email a transcription to yourself.
It even runs Linux and the developers have opened SSH up so you can
remote in and tinker with it as much as you like. Because of this,
there's a pretty awesome [[https://github.com/reHackable/awesome-reMarkable][community of people creating third-party tools
and integrations]] that add even further functionality. My favourite is
probably [[https://github.com/bordaigorl/rmview][rMview]], a really fast VNC client for the reMarkable that allows
you to view your device's screen on any computer.
After watching all of [[https://www.youtube.com/c/MyDeepGuide][MyDeepGuide's]] [[https://www.youtube.com/playlist?list=PLsSI9-gaSSmiXwb7Vjk5Vb-nB41UTnrXd][extensive playlist on the
reMarkable]], however, I decided to go with a different product.
*** Enter the Supernote A5X
The [[https://www.supernote.com/#/product?type=SN-A5-X][Supernote A5X]] has all of the basic features the reMarkable has:
reading documents, writing notes, and organising your content. Its
implementation, on the other hand, seems to be much more polished. It
also lacks some features from the reMarkable while adding others.
*** Operating System
While the reMarkable runs Codex[fn:3], a /"custom Linux-based OS
optimised for low-latency e-paper"/, the Supernote just runs Android.
There are both benefits and detriments to this; on one hand, they're
running all of Android, bloated that it is, on a very lightweight
tablet. On the other, they don't have to develop and maintain a custom
operating system. This allows them to focus on other aspects that are
arguably more important so I don't actually mind that it runs Android.
The only place that Android stands out is in system operations; file
transfer uses MTP and, when you swipe down from the top of the device, a
small bar appears similar to what was in early Android. This lets you
change WiFi networks, sync with the companion app on your LAN, the
remote servers, take a screenshot, search, and access the system
settings. Nothing else about the device really makes me think of
Android.
*** Community
I don't usually browse Reddit but [[https://old.reddit.com/r/Supernote/][the Supernote community]] there is
fascinating. I haven't looked around enough to know exactly what his
relationship is with the company, but one of the members, [[https://old.reddit.com/user/hex2asc][u/hex2asc]],
seems to represent Supernote in something of an official capacity. He's
incredibly active and usually responds to posts and questions within a
couple of days.
Before I purchased one, [[https://old.reddit.com/r/Supernote/comments/lhffyd/sync_targets_open_document_formats_and_crossnote/][I wrote a post]] asking about a couple of things
that concerned me: sync targets, open document formats, and cross-note
links. I don't ever plan to write full documents with a keyboard on the
Supernote but it would still be nice. The other features would be
absolutely killer for me as I would like to maintain a Zettelkasten (I
wrote about [[/vim-as-a-markdown-editor/][using Vim to do so]] last year but didn't end up sticking with
it) and manage document synchronisation with my own Nextcloud server.
The community was quick to respond and confirm that Zettelkasten
functionality would be implemented soon™. u/hex2asc responded /the day
after/ and said that WebDAV would be supported but not earlier than May,
ODF would likely not be supported, and cross-note links were definitely
a possibility. Another community member has been avidly following the
subreddit and even put together an [[https://app-rm.roadmunk.com/publish/03e6dca3d769e2b7015f7f48a649cb3f75f44d9e][unofficial roadmap]].
*** Interfaces
**** Home & Organisation
***** TODO Record very short videos
**** Settings
***** TODO Record very short videos
**** Writing & Annotating
The following images are screenshots of the full page above with the
possible UI variations while reading a book. This first one is default,
with the editing bar at the top. It is exactly the same as what's
displayed on the blank pages for hand writing full notes. From left to
right is the Table of Contents toggle, the pen tools (fineliner,
"fountain" pen[fn:5], and highlighter), the erasers, lasso select tool,
undo/redo, context menu, palm rejection toggle, previous page, goto
page, next page, and exit.
[[/assets/pngs/supernote-reader-default.png]]
You can hold your finger on that bar and drag it down to detach it from
the top. The default width exposes all the tools without whitespace. You
can move it around the screen by dragging the circle with a straight
line through the middle on the far left.
[[/assets/pngs/supernote-reader-medium.png]]
If you tap that circle, the width shrinks and everything except the
pens, erasers, and undo/redo buttons are hidden. It can be dragged the
same was as in the previous image and tapping that circle will expand
the bar again.
[[/assets/pngs/supernote-reader-small.png]]
The last mode is with the bar completely hidden. You achieve this just
by dragging it to the right edge of the screen. Once hidden, you can
swipe right to left from the edge and it will be revealed flush with the
right edge.
[[/assets/pngs/supernote-reader-minimal.png]]
*** Experience
**** Reading content
I love e-ink. I think it looks beautiful and would love to have an e-ink
monitor[fn:4]. That said, the Supernote has an especially nice display
with 226 PPI (pixels per inch). The image below was taken with my
phone's camera so it's not very good. However, if you zoom in a bit, you
can see that the curved edges of some letters are /slightly/ pixellated.
Viewing with my naked eye at a comfortable distance, it does look better
/to me/ than some of my print books.
[[/assets/pngs/supernote-resolution.png]]
/At the moment,/ I am pretty disappointed with Table of Contents detection
for ePUBs. A great many of my books seem to use a legacy ToC format that
the Supernote sees and tries/fails to read before attempting to read the
more up-to-date one. This is easily remedied by editing the ePUB in
[[https://calibre-ebook.com/][Calibre]], going to Tools → Upgrade Book Internals → Remove the legacy
Table of Contents in NCX format. You might need to make a small change
to one of the HTML files and revert it before the save button is
enabled. After that, just copy it back over to the Supernote and
everything should work properly.
**** Writing notes
I write notes as often if not /more/ often than I read and annotate books.
It's the main reason I purchased the device and I love the experience.
The Supernote doesn't /really/ feel like paper despite what their
marketing materials claim, though it doesn't feel /bad/ either. It's hard
to describe but I would say it's something like writing with a
rollerball pen on high-quality paper with a marble counter underneath:
incredibly smooth with but a little bit of texture so it doesn't feel
like writing on a glass display.
While writing latency[fn:6] is noticeable, I really don't have a huge
issue with it. I write very quickly but find that the slight latency
actually makes writing /more/ enjoyable. It sounds weird and I'm not sure
why, but I /really/ like writing on the Supernote; it's wonderfully
smooth, pressure-sensitive, the latency makes things interesting, and
[[https://supernote.com/#/part?id=SP-04][the Heart of Metal pen]] feels good in my hand.
**** Surfacing Content
While organisation is done using a regular filesystem hierarchy, the
Supernote does have other ways to search for and surface your notes. As
you're writing, you can use the lasso select tool and encircle a word. A
little dialogue pops up and gives you a few buttons for things you can
do with that selection: copy, move to another page, cut, add it to the
Table of Contents, or mark it as a key word. If you select the key word
icon, the Supernote does some incredible OCR[fn:7] on it and displays a
dialogue where you can add it to the note file as a tag. This dialogue
allows you to edit the word before adding it just in case the OCR was
wonky. Even with my terrible handwriting, I've found that it works very
well and I rarely have to make edits.
*** TODO Pong Isi and Volpeon when finished
** TODO Migrating repositories between git hosts
2021-04-11 16:53:27 +00:00
** TODO A perfect email setup (for me)
:PROPERTIES:
:EXPORT_FILE_NAME: a-perfect-email-setup-for-me
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :toc true
:END:
2021-04-11 16:53:27 +00:00
I've never been satisfied with any of the email clients most people use.
I've tried [[https://www.thunderbird.net/en-GB/][Thunderbird]], [[https://wiki.gnome.org/Apps/Evolution][Evolution]], [[https://getmailspring.com/][Mailspring]], [[https://support.apple.com/mail][Mail.app]], [[https://roundcube.net/][Roundcube]],
[[https://sogo.nu/][SOGo]], [[https://wiki.gnome.org/Apps/Geary][Geary]], and /many/ more. /None/ of them handle multiple accounts
particularly well because all of the emails associated with that account
are bound within it. Sure, you can make a new folder somewhere called
~TODO~ and move all of your actionable emails to that folder but, when you
go to move actionable emails from /another/ account into that folder,
you'll likely find that the client simply doesn't let you. If it does,
when you reply, it will likely be sent from the wrong account. This is a
limitation of the IMAP protocol; everything is /managed/ locally but
changes are pushed to the remote server and mixing things the way I want
leads to broken setups.
Before I go any further, these are a few characteristics of my ideal
email tool.
- Support for multiple accounts (obviously)
- /Native desktop application/ (*not* [[https://github.com/electron/electron][Electron]])
- Has stellar keyboard shortcuts
- Doesn't require internet connectivity (other than downloading and
sending of course)
- Organisation can be done with tags
*** Why tags?
Because they're better. Hierarchies are useful for prose and code but
not for files, emails, notes, or anything where an item may fit within
multiple categories. Imagine you get an email from your Computer Science
professor that includes test dates, homework, and information about
another assignment. In that same email, he asks every student to reply
with something they learned from the previous class as a form of
attendance. In a hierarchy, the best place for this might just be a ~TODO~
folder /even though/ it would also fit under ~School~, ~CS~, ~Dates~, ~To read~,
and ~Homework~. Maybe you have a few minutes and want to clear out some
emails that don't require any interaction. In a tag-based workflow, this
would be a good time to open ~To read~, get that email out of the way, and
remove the ~To read~ tag. It would still show up under the other tags so
you can find it later and take the time to fully answer the professor's
question, add those dates to your calendar, and add the homework
assignments to your ~TODO~ list. Hierarchies can be quite cumbersome to
work with, especially when one folder ends up getting all the data. Tags
ensure that you only see what you want when you want it. Tags are more
efficient and they will remain my organisation system of choice.
*** The tools
In short, the tools we will be using are...
+ [[https://www.offlineimap.org/][OfflineIMAP]] to download our emails
+ [[https://notmuchmail.org/][~notmuch~]], the primary way emails will be organised
+ [[https://afew.readthedocs.io/en/latest/][~afew~]] to apply initial ~notmuch~ tags based on subject, sender, recipient, etc.
+ [[https://neomutt.org/][NeoMutt]] to interact with those emails, reply, compose, add/remove
tags, etc.
+ [[https://marlam.de/msmtp/][~msmtp~]] for relaying our replies and compositions to our mail provider
Yes, it's a lot. Yes, it's time-consuming to set up. Yes, it's worth it
(in my opinion).
*** OfflineIMAP
As I said above, IMAP is limiting; we need to use some other method of
downloading our emails. There's an awesome piece of software called
[[https://www.offlineimap.org/][OfflineIMAP]] which is built for exactly this purpose. Its configuration
can be rather daunting if you have as many accounts as I do (17) but
it's not /terrible/.
**** General
#+BEGIN_SRC text
[general]
metadata = ~/.offlineimap
accounts = use_exa
maxsyncaccounts = 1
ui = basic
ignore-readonly = no
pythonfile = ~/.offlineimap.py
socktimeout = 60
fsync = true
#+END_SRC
The first big option is ~accounts~; it tells OfflineIMAP what to actually
sync. What to put there will be defined further down but ~use_exa~ is just
filler text. The example account is ~user@example.com~ and I shortened
that to ~use_exa~. ~maxsyncaccounts~ is also fairly important as it tells
OfflineIMAP to only pull emails from one account at a time. This is
certainly slower than multiple but it's also safer because we'll be
running this in the background and don't want many OfflineIMAP processes
executing concurrently and interfering with each other. ~pythonfile~ will
be discussed later.
**** Account
#+BEGIN_SRC text
[Account use_exa]
localrepository = use_exa-local
remoterepository = use_exa-remote
quick = 10
utf8foldernames = yes
postsynchook = notmuch new
#+END_SRC
In the first block, ~localrepository~ and ~remoterepository~ tell OfflineIMAP where
to look for your emails. ~use_exa-local~ is an arbitrary naming scheme I use to
differentiate between the various local and remote accounts. It can easily be
swapped with something else.
**** Repository
#+BEGIN_SRC text
[Repository use_exa-local]
type = Maildir
localfolders = ~/mail/use_exa
sync_deletes = yes
[Repository use_exa-remote]
type = IMAP
remotehost = imap.example.com
starttls = yes
ssl = no
remoteport = 143
remoteuser = user@example.com
remotepasseval = get_pass("use_exa")
auth_mechanisms = GSSAPI, XOAUTH2, CRAM-MD5, PLAIN, LOGIN
maxconnections = 1
createfolders = True
sync_deletes = yes
#+END_SRC
The repository sections describe how the emails are stored or retrieved.
In the ~local~ block, you'll notice that the type is ~Maildir~. In this
format, each email is given a unique filename and stored in a hierarchy
of folders within your account. This is often how your emails are stored
on your provider's mail server.
~pythonfile~ is used here to authenticate with the remote server. This can
be complicated and depends /entirely/ on how you manage your passwords. I
use [[https://keepassxc.org/][KeePassXC]] and love it. When I set OfflineIMAP up, however, it didn't
have ~libsecret~ compatibility. This would have made setup significantly
easier but, as it already just works™, I don't really see a reason to
change it.
This new feature allows ~libresecret~-based applications to query
KeePassXC for your passwords or store them there on your behalf. CLI/TUI
applications that need a secure mechanism for background authentication
can use ~secret-tool lookup Title "TITLE_OF_PASSWORD"~ as the password
command. See [[https://github.com/keepassxreboot/keepassxc/pull/2726][the pull request]] for more details. Because this wasn't a
feature when I first set it up, I put my passwords in plaintext files
and encrypted them with the GPG key stored on my YubiKey. As long as my
key is plugged in, OfflineIMAP can authenticate and download all my
emails just fine. The process for using a GPG key /not/ stored on a
hardware token is pretty much the same and I'll talk about that process
instead.
These are the contents of my ~~/.offlineimap.py~.
#+BEGIN_SRC python
#! /usr/bin/env python2
from subprocess import check_output
def get_pass(account):
return check_output(["gpg", "-dq", f" ~/.mail_pass/{account}.gpg"]).strip("\n")
#+END_SRC
This runs ~gpg -dq ~/.mail_pass/use_exa.gpg~ then strips the newline
character before returning it to OfflineIMAP. ~-d~ tells GPG that you're
passing it a file you want decrypted and ~-q~ tells it not to give any
output other than the file's contents. For a setup that works with this
Python script, put your passwords in plaintext files with the account
name as the file name (e.g. ~use_exa~). You'll then encrypt it with ~gpg
-er <YOUR_KEY_ID> use_exa~. Running ~gpg -dq use_exa.gpg~ should display
your password. Repeat for every account and store the resulting files in
~~/.mail_pass/~.
The other option, ~sync_deletes~, is whether or not to delete remote
emails that have been deleted locally. I enabled that because I want to
have easy control over how much remote storage is used.
Here's the next block again so you don't have to scroll up:
#+BEGIN_SRC text
[Repository use_exa-remote]
type = IMAP
remotehost = imap.example.com
starttls = yes
ssl = no
remoteport = 143
remoteuser = user@example.com
remotepasseval = get_pass("use_exa")
auth_mechanisms = GSSAPI, XOAUTH2, CRAM-MD5, PLAIN, LOGIN
maxconnections = 1
createfolders = True
sync_deletes = yes
#+END_SRC
This one's pretty self-explanatory. ~type~, ~remotehost~, ~starttls~, ~ssl~, and
~remoteport~ should all be somewhere in your provider's documentation.
~remoteuser~ is your email address and ~remotepasseval~ is the function that
will return your password and allow OfflineIMAP to authenticate. You'll
want enter the name of your password file without the ~.gpg~ extension;
the script takes care of adding that. Leave ~auth_mechanisms~ alone and
the same for ~maxconnections~ unless you know your provider won't rate
limit you or something for opening multiple connections. ~sync_deletes~ is
the same as in the previous block.
Copy those three blocks for as many accounts as you want emails
downloaded from. I have 510 lines just for ~Account~ and ~Repository~ blocks
due to the number of address I'm keeping track of.
*** ~notmuch~
[[https://notmuchmail.org/][~notmuch~]] is /a fast, global-search, and tag-based email system/. This
what does all of our organisation as well as what provides the "virtual"
mailboxes NeoMutt will display later on. Configuration is incredibly
simple. This file goes in ~~/.notmuch-config~.
#+BEGIN_SRC text
[database]
path=/home/user/mail/
[user]
name=Amolith
primary_email=user@example.com
[new]
tags=unread;new;
ignore=Trash;
[search]
exclude_tags=deleted;spam;
[maildir]
synchronize_flags=true
#+END_SRC
First section is the path to where all of your archives are, the ~[user]~
section is where you list all of your accounts, ~[new]~ adds ~tags~ to mail
notmuch hasn't indexed yet and ignores indexing the ~Trash~ folder, and
~[search]~ ignores mail tagged with ~deleted~ or ~spam~. The final section
tells ~notmuch~ to add maildir flags which correspond with ~notmuch~ tags.
These flags will be synced to the remote server the next time
OfflineIMAP runs and things will be somewhat organised in your webmail
interface.
After creating the configuration file, run ~notmuch new~ and wait for all
of your mail to be indexed. This could take a short amount of time or it
could take minutes up to an hour, depending on how many emails you have.
After it's finished, you'll be able to run queries and see matching
emails:
#+BEGIN_SRC text
$ notmuch search from:user@example.com
thread:0000000000002e9d December 28 [1/1] Example User; Random subject that means nothing
#+END_SRC
This is not terribly useful in and of itself because you can't read it
or reply to it or anything. That's where the Mail User Agent (MUA) comes
in.
*** ~afew~
[[https://afew.readthedocs.io/en/latest/][~afew~]] is /an initial tagging script for notmuch/. After calling ~notmuch
new~, ~afew~ will add tags based on headers such as ~From:~, ~To:~, ~Subject:~,
etc. as well as handle killed threads and spam. The official [[https://afew.readthedocs.io/en/latest/quickstart.html][quickstart
guide]] is probably the best resource on getting started but I'll include
a few tips here as well.
*** NeoMutt
*** ~msmtp~
~msmtp~ is what's known as a /Mail Transfer Agent/ (MTA). You throw it an
email and it will relay that to your mail provider's SMTP server so it
can have the proper headers attached for authentication, it can be sent
from the proper domain, etc. All the necessary security measures can be
applied that prevent your email from going directly to spam or from
being rejected outright.
~msmtp~'s configuration is also fairly simple if a bit long, just like
OfflineIMAP's.
#+BEGIN_SRC text
# Set default values for all following accounts.
defaults
# Use the mail submission port 587 instead of the SMTP port 25.
port 587
# Always use TLS.
tls on
#+END_SRC
This section just sets the defaults. It uses port 587 (STARTTLS) for all
SMTP servers unless otherwise specified and enables TLS.
#+BEGIN_SRC
account user@example.com
host smtp.example.com
from user@example.com
auth on
user user@example.com
passwordeval secret-tool lookup Title "user@example.com"
#+END_SRC
This section is where things get tedious. When passing an email to
~msmtp~, it looks at the ~From:~ header and searches for a block with a
matching ~from~ line. If it finds one, it will use those configuration
options to relay the email. ~host~ is simply the SMTP server of your mail
provider, sometimes this is ~mail.example.com~, ~smtp.example.com~, etc.
I've already explained ~from~, ~auth~ simply says that a username and
password will have to be provided, ~user~ is that username, and
~passwordeval~ is a method to obtain the password.
When I got to configuring ~msmtp~, [[https://keepassxc.org/][KeePassXC]] had just released their
~libsecret~ integration and I wanted to try it. ~secret-tool~ is a command
line tool used to store and retrieve passwords from whatever keyring
you're using. I think KDE has ~kwallet~ and GNOME has ~gnome-keyring~ if
you already have those set up and want to use them; the process should
be quite similar regardless.
As mentioned above ~secret-tool~ stores and retrieves passwords. For
retrieval, it expects the command to look like this.
#+BEGIN_SRC text
secret-tool lookup {attribute} {value} ...
#+END_SRC
I don't know what ~kwallet~ and ~gnome-keyring~'s attributes are but
this can be used with KeePassXC by specifying the ~Title~ attribute. If
the password to your email account is stored in KeePassXC with the
address as the entry title, you can retrieve it by simply running...
#+BEGIN_SRC text
secret-tool lookup Title "user@example.com"
#+END_SRC
If you have a different naming system, you'll have to experiment and try
different things; I don't know what KeePassXC's other attributes are so
I can't give other examples.
You could also just use the same method I described in [[*Repository][the Repository
section]]! It will work perfectly fine here as well.
#+BEGIN_SRC
passwordeval gpg -dq ~/.mail_pass/use_exa.gpg
#+END_SRC
Now that the whole block is assembled, copy/paste/edit for as many
accounts as you want to send email from.
*** Summary
2021-01-16 08:38:57 +00:00
*** TODO Pong fluffy when finished
2021-04-11 16:53:27 +00:00
** TODO Making yourself overly available
*** References
[[https://www.nytimes.com/2021/03/05/opinion/ezra-klein-podcast-cal-newport.html?showTranscript=1][Stop. Breathe. We Cant Keep Working Like This.]]
*** Notes
**** Get rid of information that isn't important
**** Escalate the info that is
**** Set /clear/ boundaries for when you are available
**** Enforce those with automatic DnD rules or use timers
**** With groups...
***** Specialisation is /good/ and should be /encouraged/
***** /All/ of the above points apply with coworkers as well
*** TODO Pong Jake when finished
** TODO Setting LXC up for local "cloud" development
2021-05-16 05:08:58 +00:00
* Education :@Education:
2021-04-11 16:53:27 +00:00
** TODO Homeschooling
* Music :@Music:
* Pipe Smoking :@Pipe__Smoking:
2021-04-11 16:53:27 +00:00
* Dungeons & Dragons :@Dungeons__and__Dragons:
* Footnotes
2021-05-16 05:08:58 +00:00
[fn:19] [[https://github.com/audacity/audacity/pull/835#issuecomment-834451187][Link to the comment]] and [[/assets/pngs/audacity-pr/privatelibcurl.png][link to the screenshot]]
[fn:18] [[https://github.com/audacity/audacity/pull/835#issuecomment-834010117][Link to the comment]] and [[/assets/pngs/audacity-pr/vendorproscons.png][link to the screenshot]]
[fn:17] [[https://github.com/audacity/audacity/pull/835#issuecomment-836069326][Link to the comment]] and [[/assets/pngs/audacity-pr/tantacrulrole.png][link to the screenshot]]
[fn:16] [[https://github.com/audacity/audacity/pull/835#discussion_r627762185][Link to the comment]] and [[/assets/pngs/audacity-pr/missingprivacypolicy.png][link to the screenshot]]
[fn:15] [[https://github.com/audacity/audacity/pull/835#issuecomment-834286641][Link to the comment]] and [[/assets/pngs/audacity-pr/darkpattern.png][link to the screenshot]]
[fn:14] [[https://github.com/audacity/audacity/pull/835#discussion_r627764300][Link to the comment]] and the screenshot is the same as previous
[fn:13] [[https://github.com/audacity/audacity/pull/835#discussion_r627756976][Link to the comment]] and [[/assets/pngs/audacity-pr/vaguedialogue.png][link to the screenshot]]
[fn:12] [[https://github.com/audacity/audacity/pull/835#discussion_r628124998][Link to the review]] and [[/assets/pngs/audacity-pr/defaultconsentbutton.png][link to the screenshot]]
[fn:11] [[https://github.com/audacity/audacity/pull/835#discussion_r628008821][Link to the review]] and [[/assets/pngs/audacity-pr/externaldependency.png][link to the screenshot]]
[fn:10] [[https://github.com/audacity/audacity/pull/835#discussion_r628005925][Link to the review]] and [[/assets/pngs/audacity-pr/vendorcurl.png][link to the screenshot]]
[fn:9] Note that because I am not a C programmer, these reviews might
not be entirely accurate and I wouldn't be able to catch the reviewer's
error. I am relying on other community members to catch issues and
comment on them; none of the reviews I link to have such comments so I'm
assuming they are correct.
[fn:8] [[https://github.com/audacity/audacity/pull/835#discussion_r627993755][Link to the review]] and [[/assets/pngs/audacity-pr/writeanalyticsid.png][link to the screenshot]]
[fn:7] /Optical Character Recognition/: the program looks at your
handwriting and tries to turn it into text.
[fn:6] In this situation, latency refers to how long it takes for "ink"
to show up on the "page" after writing something.
2021-04-11 16:53:27 +00:00
[fn:5] It's not really a fountain pen even though that's what they call
it; it's just pressure-sensitive.
2021-05-16 05:08:58 +00:00
[fn:4] There does seem to be a group of people interested in just such a
thing: /[[https://alexsoto.dev/challenges-building-an-open-source-eink-laptop.html][Challenges Building an Open-Source E Ink Laptop]]/
2021-04-11 16:53:27 +00:00
[fn:3]Taken from their [[https://support.remarkable.com/hc/en-us/articles/360006699537-About-reMarkable-2-][support page about the reMarkable 2]]; search the
page for /operating system/ and it should show up.
[fn:2]I dislike Apple's operating system, their hardware, business
model, privacy practises, and much of what they stand for as a company.
Don't @ me.
[fn:1]E-R/W is a play on media commonly being labelled as R/W when you
can read from it and write to it.