Commit Graph

263 Commits

Author SHA1 Message Date
Christoph Lohmann 579f12d47b Add -g geometry to st and the manpage. 2012-09-03 23:02:29 +02:00
Christoph Lohmann 466decd535 Fixing a type in in2 in the st.info. 2012-09-03 21:54:40 +02:00
Roberto E. Vargas Caballero 930b2c4a7f Force redisplay of all lines in DECSCNM
When it is called DECSCNM all lines become dirty, because it is necessary
redraw all lines for getting the new colors. It is easy see the problem
running 'echo ^[[?5h'.

In order to get a correct flash when running tput flash is necessary wait
after DECSCNM, until the changes are displayed, because in other case the
switch between reverse on/reverse off will be too much fast and nothing will
happen.
---
 st.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
2012-09-03 21:52:34 +02:00
Roberto E. Vargas Caballero a984ffc4cb Add write I/O to file
This is a theorical feature listed in http://st.suckless.org/goals. All the
input/output of the terminal will be written to a file, which can be very
useful for debugging, and also allow interconnect st to other process
through named pipes.
---
 st.1 |    6 ++++++
 st.c |   14 +++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)
2012-09-03 21:52:21 +02:00
Christoph Lohmann cfefa054e8 Patch from Roberto Vargas. »Add initialization strings in terminfo«
Taken from the description:

When tput init is executed the list of task performed are (taken from
terminfo(5)):

              run the program
                     iprog

              output is1 is2

              set the margins using
                     mgc, smgl and smgr

              set tabs using
                     tbc and hts

              print the file
                     if

              and finally
                     output is3.

When reset is executed, a more stronger initialization process is performed,
so the terminal can return from an unknown state. rs1, rs2 and rs3 are used
in this case instead of
using is1, is2 and is3.

This patch makes is2 = rs2, resets insert mode and set normal keypad
mode. For rs1 it performs a full initilization using ^[c.
2012-09-03 21:50:22 +02:00
Christoph Lohmann b11d85c9be Add standout mode. 2012-09-02 19:53:50 +02:00
Christoph Lohmann 7f17a70834 Cleaning up lonely tabs. 2012-09-02 19:43:29 +02:00
Christoph Lohmann 588ba51a53 Make it more obvious where the wrong attribute is used. 2012-09-02 19:42:00 +02:00
Roberto E. Vargas Caballero c79df9f78d Enable multiple arguments in SM and RM
SM and RM can receive multiple parameters, but the code only was accepting
only one. This patch join the code of set and reset modes (SM and RM) in a
common function and uses a loop which deals with all the arguments of the
sequence. This patch improves xterm and vt100 compability.
---
 st.c |  180 ++++++++++++++++++++++++++++--------------------------------------
 1 file changed, 76 insertions(+), 104 deletions(-)
2012-09-02 19:09:35 +02:00
Roberto E. Vargas Caballero 4cdcc39539 Add vpa terminfo capability
---
 st.info |    2 ++
 1 file changed, 2 insertions(+)
2012-09-02 19:08:52 +02:00
Christoph Lohmann 81c678e53e Silencing the compiler but keeping strparse.
This will really be needed when there is a full 256 color support.
2012-08-30 21:19:53 +02:00
Christoph Lohmann c58950f2ef Applying the CBT patch of Roberto Vargas. Thanks. 2012-08-30 21:17:54 +02:00
Christoph Lohmann 91fa81dbac Never trust terminfo fata morganas. And adding other xterm compatibility. 2012-08-30 07:38:47 +02:00
Christoph Lohmann 6696ef8563 Add OSC, DSC, PM, APC and settitle. 2012-08-29 23:14:20 +02:00
Christoph Lohmann ff040e9894 Adding setb and setf and a comment about terminfo installation. 2012-08-29 21:13:47 +02:00
Roberto E. Vargas Caballero aaef13aaaa Add CHT sequence
This sequence performs "Cursor Forward Tabulation <n> tab stops", which
although is not present in vt100 or vt102, xterm accepts it.
---
 st.c |    5 +++++
 1 file changed, 5 insertions(+)
2012-08-29 20:05:25 +02:00
Christoph Lohmann 12de47a933 Applying the patches of k0ga and changing the LICENSE file in the appropriate
way.
2012-08-29 20:01:34 +02:00
Roberto E. Vargas Caballero c084c06b40 Add TBC sequence
This sequence clears tab stops in the terminal. If the argument is not present
or is zero, then removes the tab stop of the current horizontal position. If
the argument is 3 then removes all the tab stops of the terminal. It was
necessary modify the terminfo entry tbc, because it has \E[2g instead of the
correct \E[3g.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
---
 st.c    |   12 ++++++++++++
 st.info |    2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)
2012-08-29 19:59:47 +02:00
Roberto E. Vargas Caballero 93901ca4fe Add HTS sequence
This sequence adds a new tab stop in the current horizontal position. This
means that tputtab must be look for the next tab stop in the tabs array
instead of using a hard coded value offset. Also, CHT sequence XXX message
is removed because it is not a vt10x sequence (as far as I know it is a
vt50x sequence), and it is not implemented by linux virtual terminal neither
by xterm.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
---
 st.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
2012-08-29 19:59:43 +02:00
Roberto E. Vargas Caballero ee7fd748ac Add tabs field into Term struct
Tabs stop are simulated in st using a fixed size of 8, always, without be
worried about sequences changing the tab stops. A user can put a tab stop in
each horizontal position of the screen, so we need at least one flag for
each column of the screen. In the same way as dirty flags is used for the
rows, it is used a bool dinamic array.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
---
 st.c |   22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)
2012-08-29 19:59:37 +02:00
Brandon Invergo c6853fe185 apply post-XDBE patch BORDER fix 2012-08-03 14:46:40 +02:00
Brandon Invergo 94771d0588 Implement Xdbe-based double-buffering 2012-07-28 14:27:26 +02:00
Aurélien Aptel 8fdba7494f update TODO. 2012-02-27 12:48:13 +01:00
Aurélien Aptel cfea72c7b4 cleanup. refactored dirt-related function. 2012-02-27 12:44:02 +01:00
Aurélien Aptel 6c0a1eff2f use SHELL as default shell. 2012-02-16 19:24:46 +01:00
Aurélien Aptel 7823aeb1f9 revert to "tip" in VERSION. 2012-02-16 01:06:45 +01:00
Aurélien Aptel 83b0656588 Added tag 0.2.1 for changeset 108926a0fe61 2012-02-16 01:05:26 +01:00
Aurélien Aptel 970d44a60d bump version. 2012-02-16 01:05:14 +01:00
Aurélien Aptel ff5edcfd70 replace fwrite by printf. 2012-02-16 00:59:26 +01:00
Aurélien Aptel cb2e0e9c31 rewrite csidump(). 2012-02-16 00:58:16 +01:00
Aurélien Aptel 53ac69e90d clean and name enum definitions. 2012-02-16 00:33:11 +01:00
Aurélien Aptel 751fb765e4 fix default color overwriten bug. 2012-02-16 00:10:32 +01:00
Aurélien Aptel be2877cd04 show dark cursor when unfocused. 2012-02-15 19:33:48 +01:00
Aurélien Aptel d8e11bdb0e document possible configuration. 2012-02-15 19:11:07 +01:00
Aurélien Aptel 33558ca042 handle dim/bright colors. 2012-02-15 19:10:31 +01:00
Aurélien Aptel 6de1ba6e74 merge 2012-02-13 01:01:41 +01:00
anselm@garbe.us b11e22df7d some minor fixes 2012-02-11 10:48:18 +01:00
Aurélien Aptel cee6ccc6ee reduce size of each glyph for faster copy. 2012-02-08 16:45:52 +01:00
Aurélien Aptel b6b90253b8 Added tag 0.2 for changeset 3c2f9f2ab5e4 2012-02-07 23:53:45 +01:00
Aurélien Aptel bcb7ec68c2 cosmetic, whitespace, etc. 2012-01-21 23:43:03 +01:00
Aurélien Aptel df54ab0405 fix PRINT/DRAW _TIMEOUT and fix redrawing bug. 2012-01-21 23:26:53 +01:00
Aurélien Aptel 896310e592 copy dirty lines to screen, add select() timeout & min time between draw() calls.
* add a timeout value (SELECT_TIMEOUT) of 20ms in the select() call
* wait at least 20ms (DRAW_TIMEOUT) between draw() calls
* only copy dirty lines from the buffer to the screen

what draw() does:
* clears dirty lines in the buffer
* draws the longest same-attributes string of each
  dirty line to the buffer with multiple xdraws() call
* copies the current dirty line from buffer to the screen with a single
  xcopy() call

this changeset makes st run ~10x faster.
2012-01-21 23:14:41 +01:00
Aurélien Aptel 13a8eeb810 fix segfault in selection. (thx Martti Kühne) 2012-01-10 22:21:03 +01:00
Aurélien Aptel ab9c9a4e3a merge. 2011-11-01 16:37:16 +01:00
Aurélien Aptel a20125a3d1 fix selection. (thx Tarmo Heiskanen) 2011-11-01 16:33:43 +01:00
Aurélien Aptel 23bb97d9f3 drawregion() only copies region on screen. 2011-10-20 23:26:58 +02:00
Aurélien Aptel 0dbf9c8c12 add dirty flag for lines 2011-10-20 23:20:59 +02:00
Aurélien Aptel 907cb8bfa6 no palette limit (thx Nick) 2011-10-06 21:32:34 +02:00
Aurélien Aptel 9d613092d6 simplify version format. 2011-09-22 10:04:58 +02:00
Aurélien Aptel 4bd087766f selection is removed or scrolled properly. (thx Rafa Garcia Gallego) 2011-09-16 18:48:16 +02:00