Implemented rekeying (-r secs)

Makefile

@@ -1,4 +1,4 @@
-VERSION := 0.9.5.6-rc
+VERSION := 0.9.5.7-rc
 .PHONY: lint vis clean common client server passwd\
  subpkgs install uninstall reinstall scc
  

xs/xs.go

@@ -701,11 +701,11 @@ func main() { //nolint: funlen, gocyclo
 		port          uint
 		cmdStr        string
 		tunSpecStr    string // lport1:rport1[,lport2:rport2,...]
-
+		rekeySecs     uint
-		copySrc      []byte
+		copySrc       []byte
-		copyDst      string
+		copyDst       string
-		copyQuiet    bool
+		copyQuiet     bool
-		copyLimitBPS uint
+		copyLimitBPS  uint
 
 		authCookie    string
 		chaffEnabled  bool
@@ -745,7 +745,8 @@ func main() { //nolint: funlen, gocyclo
       KEX_FRODOKEM_976AES
       KEX_FRODOKEM_976SHAKE`)
 	flag.StringVar(&kcpMode, "K", "unused", "KCP `alg`, one of [KCP_NONE | KCP_AES | KCP_BLOWFISH | KCP_CAST5 | KCP_SM4 | KCP_SALSA20 | KCP_SIMPLEXOR | KCP_TEA | KCP_3DES | KCP_TWOFISH | KCP_XTEA] to use KCP (github.com/xtaci/kcp-go) reliable UDP instead of TCP") //nolint:lll
-	flag.UintVar(&port, "p", 2000, "``port")                                                                                                                                                                                                                            //nolint:gomnd,lll
+	flag.UintVar(&port, "p", 2000, "``port") //nolint:gomnd,lll
+	flag.UintVar(&rekeySecs, "r", 300, "rekey interval in `secs`")
 	//nolint:gocritic,nolintlint // flag.StringVar(&authCookie, "a", "", "auth cookie")
 	flag.BoolVar(&chaffEnabled, "e", true, "enable chaff pkts")
 	flag.UintVar(&chaffFreqMin, "f", 100, "chaff pkt freq min `msecs`")  //nolint:gomnd
@@ -972,6 +973,9 @@ func main() { //nolint: funlen, gocyclo
 		exitWithStatus(XSNetDialFailed)
 	}
 
+	conn.RekeyHelper(rekeySecs)
+	defer conn.ShutdownRekey()
+
 	// === Shell terminal mode (Shell vs. Copy) setup
 
 	// Set stdin in raw mode if it's an interactive session

xsd/xsd.go

@@ -529,11 +529,13 @@ func main() { //nolint:funlen,gocyclo
 	var chaffBytesMax uint
 	var dbg bool
 	var laddr string
+	var rekeySecs uint
 
 	var useSystemPasswd bool
 
 	flag.BoolVar(&vopt, "v", false, "show version")
-	flag.StringVar(&laddr, "l", ":2000", "interface[:port] to listen")
+	flag.UintVar(&rekeySecs, "r", 300, "rekey interval in `secs`")
+	flag.StringVar(&laddr, "l", ":2000", "interface[:port] to listen") //nolint:gomnd,lll
 	flag.StringVar(&kcpMode, "K", "unused", `set to one of ["KCP_NONE","KCP_AES", "KCP_BLOWFISH", "KCP_CAST5", "KCP_SM4", "KCP_SALSA20", "KCP_SIMPLEXOR", "KCP_TEA", "KCP_3DES", "KCP_TWOFISH", "KCP_XTEA"] to use KCP (github.com/xtaci/kcp-go) reliable UDP instead of TCP`) //nolint:lll
 	flag.BoolVar(&useSysLogin, "L", false, "use system login")
 	flag.BoolVar(&chaffEnabled, "e", true, "enable chaff pkts")
@@ -646,22 +648,22 @@ func main() { //nolint:funlen,gocyclo
 	go func() {
 		for {
 			sig := <-exitCh
-			switch sig.String() {
+			switch sig {
-			case "terminated":
+			case syscall.SIGTERM: //"terminated":
-				logger.LogNotice(fmt.Sprintf("[Got signal: %s]", sig)) //nolint:errcheck
+				logger.LogNotice(fmt.Sprintf("[Got signal: %s]", sig.String())) //nolint:errcheck
 				signal.Reset()
 				syscall.Kill(0, syscall.SIGTERM) //nolint:errcheck
-			case "interrupt":
+			case syscall.SIGINT: //"interrupt":
-				logger.LogNotice(fmt.Sprintf("[Got signal: %s]", sig)) //nolint:errcheck
+				logger.LogNotice(fmt.Sprintf("[Got signal: %s]", sig.String())) //nolint:errcheck
 				signal.Reset()
 				syscall.Kill(0, syscall.SIGINT) //nolint:errcheck
-			case "hangup":
+			case syscall.SIGHUP: //"hangup":
-				logger.LogNotice(fmt.Sprintf("[Got signal: %s - nop]", sig)) //nolint:errcheck
+				logger.LogNotice(fmt.Sprintf("[Got signal: %s - nop]", sig.String())) //nolint:errcheck
 				if cpuprofile != "" || memprofile != "" {
 					dumpProf()
 				}
 			default:
-				logger.LogNotice(fmt.Sprintf("[Got signal: %s - ignored]", sig)) //nolint:errcheck
+				logger.LogNotice(fmt.Sprintf("[Got signal: %s - ignored]", sig.String())) //nolint:errcheck
 			}
 		}
 	}()
@@ -700,6 +702,8 @@ func main() { //nolint:funlen,gocyclo
 			} else {
 				log.Println("Accepted client")
 
+				conn.RekeyHelper(rekeySecs)
+
 				// Set up chaffing to client
 				// Will only start when runShellAs() is called
 				// after stdin/stdout are hooked up
@@ -709,6 +713,7 @@ func main() { //nolint:funlen,gocyclo
 				// The loop then returns to accepting, so that
 				// multiple connections may be served concurrently.
 				go func(hc *xsnet.Conn) (e error) {
+					defer hc.ShutdownRekey()
 					defer hc.Close()
 
 					// Start login timeout here and disconnect if user/pass phase stalls

xsnet/chan.go

@@ -57,9 +57,9 @@ func expandKeyMat(keymat []byte, blocksize int) []byte {
 	return keymat
 }
 
-/* Support functionality to set up encryption after a channel has
+/* (Re-)initialize the keystream and hmac state for an xsnet.Conn, returning
-been negotiated via xsnet.go
+   a cipherStream and hash
-*/
+ */
 func (hc *Conn) getStream(keymat []byte) (rc cipher.Stream, mc hash.Hash, err error) {
 	var key []byte
 	var block cipher.Block

xsnet/consts.go

@@ -78,6 +78,7 @@ const (
 	CSOTunDisconn   // server -> client: tunnel rport disconnected
 	CSOTunHangup    // client -> server: tunnel lport hung up
 	CSOKeepAlive    // bidir keepalive packet to monitor main connection
+	CSORekey        // TODO: rekey/re-select session cipher/hash algs
 )
 
 // TunEndpoint.tunCtl control values - used to control workers for client

xsnet/net.go

@@ -88,6 +88,7 @@ type (
 		Cols       uint16
 
 		keepalive uint // if this reaches zero, conn is considered dead
+		rekey     uint // if nonzero, rekeying interval in seconds
 		Pproc     int  // proc ID of command run on this conn
 		chaff     ChaffConfig
 		tuns      *map[uint16](*TunEndpoint)
@@ -1345,6 +1346,13 @@ func (hc *Conn) Read(b []byte) (n int, err error) {
 				// payload of keepalive (2 bytes) is not currently used (0x55aa fixed)
 				_ = binary.BigEndian.Uint16(payloadBytes[0:2])
 				hc.ResetKeepAlive()
+			case CSORekey:
+				// rekey
+				logger.LogDebug(fmt.Sprintf("[Got rekey [%02x %02x %02x ...]\n",
+					payloadBytes[0], payloadBytes[1], payloadBytes[2]))
+				rekeyData := payloadBytes
+				//fmt.Printf("rekeyData:%v\n", rekeyData)
+				hc.r, hc.rm, err = hc.getStream(rekeyData)
 			case CSOTermSize:
 				fmt.Sscanf(string(payloadBytes), "%d %d", &hc.Rows, &hc.Cols)
 				log.Printf("[TermSize pkt: rows %v cols %v]\n", hc.Rows, hc.Cols)
@@ -1461,13 +1469,18 @@ func (hc *Conn) Read(b []byte) (n int, err error) {
 // Write a byte slice
 //
 // See go doc io.Writer
-func (hc Conn) Write(b []byte) (n int, err error) {
+func (hc *Conn) Write(b []byte) (n int, err error) {
+	logger.LogDebug("[+Write]")
 	n, err = hc.WritePacket(b, CSONone)
+	logger.LogDebug("[-Write]")
 	return n, err
 }
 
 // Write a byte slice with specified ctrlStatOp byte
 func (hc *Conn) WritePacket(b []byte, ctrlStatOp byte) (n int, err error) {
+	hc.Lock()
+	defer hc.Unlock()
+
 	//log.Printf("[Encrypting...]\r\n")
 	var hmacOut []uint8
 	var payloadLen uint32
@@ -1495,15 +1508,6 @@ func (hc *Conn) WritePacket(b []byte, ctrlStatOp byte) (n int, err error) {
 		b = append([]byte{byte(padSide)}, append([]byte{byte(padLen)}, append(b, padBytes...)...)...)
 	}
 
-	// N.B. Originally this Lock() surrounded only the
-	// calls to binary.Write(hc.c ..) however there appears
-	// to be some other unshareable state in the Conn
-	// struct that must be protected to serialize main and
-	// chaff data written to it.
-	//
-	// Would be nice to determine if the mutex scope
-	// could be tightened.
-	hc.Lock()
 	payloadLen = uint32(len(b))
 	if hc.logPlainText {
 		log.Printf("  >:ptext:\r\n%s\r\n", hex.Dump(b[0:payloadLen]))
@@ -1561,7 +1565,6 @@ func (hc *Conn) WritePacket(b []byte, ctrlStatOp byte) (n int, err error) {
 	} else {
 		//fmt.Println("[a]WriteError!")
 	}
-	hc.Unlock()
 
 	if err != nil {
 		log.Println(err)
@@ -1593,6 +1596,40 @@ func (hc *Conn) SetupChaff(msecsMin uint, msecsMax uint, szMax uint) {
 	hc.chaff.szMax = szMax
 }
 
+func (hc *Conn) ShutdownRekey() {
+	hc.rekey = 0
+}
+
+func (hc *Conn) RekeyHelper(intervalSecs uint) {
+	go func() {
+		hc.rekey = intervalSecs
+		for {
+			if hc.rekey != 0 {
+				//logger.LogDebug(fmt.Sprintf("[rekeyHelper Loop]\n"))
+				time.Sleep(time.Duration(hc.rekey) * time.Second)
+
+				// Send rekey to other end
+				rekeyData := make([]byte, 64)
+				_, err := crand.Read(rekeyData)
+				//logger.LogDebug(fmt.Sprintf("[rekey [%02x %02x %02x ...]\n",
+				//	rekeyData[0], rekeyData[1], rekeyData[2]))
+				logger.LogDebug("[+rekeyHelper]")
+				_, err = hc.WritePacket(rekeyData, CSORekey)
+				hc.Lock()
+				hc.w, hc.wm, err = hc.getStream(rekeyData)
+				logger.LogDebug("[-rekeyHelper]")
+				hc.Unlock()
+				if err != nil {
+					log.Printf("[rekey WritePacket err! (%v) rekey dying ...]\n", err)
+					return
+				}
+			} else {
+				return
+			}
+		}
+	}()
+}
+
 // Helper routine to spawn a chaffing goroutine for each Conn
 func (hc *Conn) chaffHelper() {
 	go func() {
@@ -1605,7 +1642,9 @@ func (hc *Conn) chaffHelper() {
 				min := int(hc.chaff.msecsMin)
 				nextDuration = rand.Intn(int(hc.chaff.msecsMax)-min) + min
 				_, _ = rand.Read(bufTmp)
+				logger.LogDebug("[+chaffHelper]")
 				_, err := hc.WritePacket(bufTmp, CSOChaff)
+				logger.LogDebug("[-chaffHelper]")
 				if err != nil {
 					log.Println("[ *** error - chaffHelper shutting down *** ]")
 					hc.chaff.shutdown = true
@@ -1642,7 +1681,9 @@ func (hc *Conn) keepaliveHelper() {
 		for {
 			nextDuration := 10000
 			bufTmp := []byte{0x55, 0xaa}
+			logger.LogDebug("[+keepaliveHelper]")
 			_, err := hc.WritePacket(bufTmp, CSOKeepAlive)
+			logger.LogDebug("[-keepaliveHelper]")
 			//logger.LogDebug(fmt.Sprintf("[keepalive]\n"))
 			if err != nil {
 				logger.LogDebug(fmt.Sprintf("[ *** error - keepaliveHelper quitting *** ]\n"))