Commit Graph

424 Commits

Author SHA1 Message Date
Simon Ser 1100f3a40b backend/drm: don't clear pending cursor FB on failed commit
The previous fix tried to side-step cursor->pending_fb completely.
However that messes up our buffer locking mechanism.

Instead, stop clearing the pending cursor FB on a failed commit. The
pending cursor FB will remain for the next commit.

Fixes: 6c3d080e25 ("backend/drm: populate cursor plane's current_fb")
(cherry picked from commit 4dee7a2f6f)
2021-07-07 19:24:47 +02:00
Simon Ser b213d2b81f Revert "backend/drm: populate cursor plane's current_fb"
This reverts commit 6c3d080e25.

Populating wlr_drm_plane.current_fb messes up the buffer's locking.
The previous buffer is released while it's still being displayed
on-screen.

(cherry picked from commit 5f26360bd8)
2021-07-07 19:24:47 +02:00
Simon Ser dc2e640a7d buffer: make enum wlr_buffer_cap public
Custom backends and renderers need to implement
wlr_backend_impl.get_buffer_caps and
wlr_renderer_impl.get_render_buffer_caps. They can't if enum
wlr_buffer_cap isn't made public.

(cherry picked from commit a38baec1f8)
2021-07-07 19:24:36 +02:00
Simon Ser 2f615468b6 backend: add output state allow-lists
Right now, when a new output state field is added, all backends by
default won't reject it. This means we need to add new checks to
each and every backend when we introduce a new state field.

Instead, introduce a bitmask of supported output state fields in
each backend, and error out if the user has submitted an unknown
field.

Some fields don't need any backend involvment to work. These are
listed in WLR_OUTPUT_STATE_BACKEND_OPTIONAL as a convenience.
2021-06-20 23:17:08 +02:00
Simon Ser 6c3d080e25 backend/drm: populate cursor plane's current_fb
The set_cursor() hook is a little bit special: it's not really
synchronized to commit() or test(). Once set_cursor() returns true,
the new cursor is part of the current state.

This fixes a state where wlr_drm_connector.cursor_enabled is true
but there is no FB available. This is triggered by set_cursor()
followed by a failed commit(), which resets pending_fb.

We should definitely fix the output interface to make the cursor part
of the pending state, but that's a more involved change.
2021-06-17 00:25:27 +02:00
Simon Ser 3345eaca89 backend/drm: remove test_buffer
Instead, call drm_connector_set_pending_fb.
2021-06-13 10:57:17 +02:00
Simon Ser eca5d2f37f backend/drm: move session check from test_buffer to drm_connector_test
The other caller (drm_connector_commit_state) already checks this.
2021-06-13 10:57:17 +02:00
Simon Ser 758f117442 backend/drm: move drm_connector_set_pending_fb up
This will be used in drm_connector_test shortly.
2021-06-13 10:57:17 +02:00
Simon Ser f55b43ddd6 backend/drm: allocate a CRTC in drm_connector_test
We can't perform a test-only atomic commit if the connector is
missing a CRTC.
2021-06-13 10:57:17 +02:00
Simon Ser cb378600e4 backend/drm: allocate a CRTC in drm_connector_commit_state
drm_connector_set_pending_fb needs a CRTC to import the buffer.
2021-06-13 10:57:17 +02:00
Simon Ser b180d3482f backend/drm: introduce drm_connector_alloc_crtc
This function allocates a CRTC for a connector if necessary.
2021-06-13 10:57:17 +02:00
Simon Ser 63f891e393 backend/drm: allow committing a buffer and a mode together
Set the plane's pending FB before calling drm_connector_set_mode.
2021-06-13 10:57:17 +02:00
Simon Ser e89cf5f047 backend/drm: use atomic test-only commits for modifier fallback
Instead of trying to perform a real modeset in init_renderer,
perform an atomic test-only commit to find out whether disabling
modifiers is necessary because of bandwidth limitations.

This decouples init_renderer from the actual commit, making it
possible to modeset an output with a user-supplied buffer instead
of a black frame.

We loose the ability to make sure the buffers coming from the
swapchain will work fine when using the legacy interface. This
can break i915 when atomic is disabled and modifiers enabled.
But i915 always has atomic (so the user must explicitly disable it
to run into potential bandwidth limitations) and is the only known
problematic driver.
2021-06-13 10:57:17 +02:00
Simon Ser b86a0c8d8f backend/drm: move cursor fields to wlr_drm_connector
Doesn't make a lot of sense to split the cursor fields between
wlr_drm_plane and wlr_drm_connector. Let's just move everything to
wlr_drm_connector.
2021-06-02 11:08:52 +02:00
Simon Ser 2b0a1aeed5 output: take a wlr_buffer in set_cursor
Instead of passing a wlr_texture to the backend, directly pass a
wlr_buffer. Use get_cursor_size and get_cursor_formats to create
a wlr_buffer that can be used as a cursor.

We don't want to pass a wlr_texture because we want to remove as
many rendering bits from the backend as possible.
2021-06-02 11:08:52 +02:00
Simon Ser e06ea4e84a backend/drm: remove format arg from drm_plane_init_surface
This was always set to ARGB8888.
2021-06-02 11:08:52 +02:00
Simon Ser 9e9be83a58 backend/drm: implement get_cursor_formats and get_cursor_size 2021-06-02 11:08:52 +02:00
Kenny Levinsen 2603a5dee7 backend/drm: Do not require mode commit on enable
If a mode is not provided, use the current mode intead.

Closes: https://github.com/swaywm/wlroots/issues/2904
2021-04-30 21:33:28 +02:00
Simon Ser a1e8a639b3 backend/drm: introduce drm_connector_commit_state
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
2021-04-29 19:51:57 +02:00
Simon Ser e543e26206 backend/drm: take a wlr_drm_connector instead of a wlr_output
No need to take a generic wlr_output, we already know the output
comes from the DRM backend at that point.
2021-04-29 19:51:57 +02:00
Simon Ser e06c62af77 backend/drm: take output state arg in drm_connector_commit_buffer
This will allow a whole state to be applied at once, instead of
individually applying the buffer and the mode.
2021-04-29 19:51:57 +02:00
Simon Ser 218955ce95 backend/drm: remove mode arg from drm_connector_set_mode
All of the information is in wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 7aba881c47 backend/drm: remove mode arg from drm_connector_init_renderer
This is now unused.
2021-04-29 19:51:57 +02:00
Simon Ser 31082a0554 backend/drm: remove wlr_drm_crtc_state.mode
Replace it with drm_connector_state_mode, which computes the mode
from the wlr_output_state to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser dfea0ff31d backend/drm: remove wlr_drm_crtc_state.active
Replace it with drm_connector_state_active, which figures out
whether the connector is active depending on the wlr_output_state
to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser 485ecc11a6 backend/drm: remove wlr_drm_crtc.pending_modeset
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser c9c2d7539c backend/drm: fill scratch wlr_output_state for set_mode
Populate the wlr_output_state when setting a mode. This will allow
drm_connector_set_mode to stop relying on ephemeral fields in
wlr_drm_crtc. Also drm_connector_set_mode will be able to apply
both a new buffer and a new mode atomically.
2021-04-29 19:51:57 +02:00
Simon Ser 1a9701cd7c backend/drm: take wlr_output_state as arg in commit callers
Instead of relying on wlr_output.pending to be empty when performing
backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 8f90d7f8f5 backend/drm: take wlr_output_state as arg in crtc_commit
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
2021-04-29 19:51:57 +02:00
Simon Ser 4839664a92 backend/drm: carry on when disabling a CRTC fails
On GPU unplug, disabling a CRTC can fail with EPERM.

References: https://github.com/swaywm/wlroots/pull/2575#issuecomment-761771264
2021-04-27 09:11:44 +02:00
Simon Ser 053ebe7c27 backend/drm: terminate display on drmHandleEvent failure 2021-04-14 23:56:56 +02:00
Stephan Hilb 9f012cac2f drm: check for PRIME support
PRIME support for buffer sharing has become mandatory since the renderer
rewrite. Make sure we check for the appropriate capabilities in backend,
allocator and renderer.

See also #2819.
2021-04-10 10:49:55 +02:00
Simon Ser 8ccb4bbb5f backend/drm: stop testing for buffer in drm_connector_commit_buffer
We now do the test in drm_connector_test, called from
drm_connector_commit.
2021-04-06 20:35:15 +02:00
Simon Ser d0bf750916 backend/drm: use atomic test-only commits for direct scan-out
This allows callers to use wlr_output_test to figure out whether a
buffer can be scanned out prior to committing the output.
2021-04-06 20:35:15 +02:00
Simon Ser 1ec97bdf4f backend/drm: improve logs in drm_fb_create
Downgrade errors to DEBUG level, because drm_fb_create is used in
test_buffer, so errors aren't always fatal. Add ERROR logs at call
sites where a failure is fatal, to make it clear something wrong
happened.
2021-04-06 14:57:59 +02:00
Simon Ser 511e42be5e backend/drm: try to import buffer when testing it
If the import to KMS succeeds, we have a better chance to be able to
scan it out.

Importing is also necessary for test-only commits, which we want to
add in the future.
2021-04-06 14:57:59 +02:00
Simon Ser 7709a965e5 backend/drm: use format table in test_buffer
Instead of an ad-hoc strip_alpha_channel function, use the
centralized format table to get an opaque substitute.
2021-03-31 17:29:31 +02:00
Simon Ser 44fa2c4b49 output: fix transform matrix for 90/270 rotations
We need to adjust the second translation depending on the transform
we applied.

Fixes: 9601a2abf0 ("output: improve transform matrix calculation"
Closes: https://github.com/swaywm/wlroots/issues/2774
2021-03-11 22:52:38 +01:00
Simon Zeni 9601a2abf0 output: improve transform matrix calculation
Compute only the transform matrix in the output. The projection matrix
will be calculated inside the gles2 renderer when we start rendering.

The goal is to help the pixman rendering process.
2021-03-10 15:33:36 +01:00
Simon Ser 73ffab70b0 backend/drm: don't blit in drm_fb_import
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler
and better fits its name.
2021-01-24 18:33:56 +01:00
Simon Ser 4af85f4c19 backend/drm: simplify drm_fb_lock_surface
Make it take a plane instead, and rename to drm_plane_lock_surface.
2021-01-24 18:22:03 +01:00
Simon Ser 04d89a8bc5
backend/drm: fix modifiers for cursor plane buffers
In 93cd3a79b2 ("backend/drm: stop using GBM flags"), we stopped
using the GBM_BO_USE_LINEAR flag in favor of a modifier list set
to { DRM_FORMAT_MOD_LINEAR }. However, the last argument of
drm_plane_init_surface disables modifiers -- so the buffer will just
get allocated with an implicit modifier, without necessarily being
LINEAR.

To fix this, allow modifiers when allocating the cursor buffers.
wlr_drm_plane.formats should already have the necessary LINEAR
restrictions.

Fixes: 93cd3a79b2 ("backend/drm: stop using GBM flags")
2021-01-17 22:25:18 +01:00
Simon Ser f17b0f975d backend/drm: add wlr_drm_connector_get_id
This allows a compositor to get a KMS connector object ID from a
wlr_output. The compositor can then query more information about
the connector via libdrm.

This gives more freedom to compositors and allows them to read
KMS properties that wlroots doesn't know about. For instance,
they could read the EDID or the suggested_{X,Y} properties and
change their output configuration based on that.
2021-01-17 12:42:32 +01:00
Simon Ser cb6f584496 backend/drm: add support for the subconnector property
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.

Set the output description accordingly.

See https://drmdb.emersion.fr/properties/3233857728/subconnector
2021-01-17 12:42:25 +01:00
Simon Ser a6a0568316
backend: remove unnecessary GLES2 includes 2021-01-14 12:36:49 +01:00
Simon Ser dc61f471da
backend/drm: remove unnecessary wlr_drm_fb.wlr_buf check
We don't need this check, wlr_buf is guaranteed not to be NULL.
2021-01-13 19:01:02 +01:00
Simon Ser 5d054258af
backend/drm: fix segfault in page_flip_handler
Since 5b1b43c68c ("backend/drm: make wlr_drm_plane.{pending,queued,current}_fb
pointers"), current_fb can be NULL if there's no buffer. If current_fb
is not NULL, current_fb->wlr_buf is guaranteed to not be NULL.

Closes: https://github.com/swaywm/wlroots/issues/2634
2021-01-12 11:41:45 +01:00
Simon Ser 91cb0fc443 backend/drm: only keep track of local buffer
Stop keeping track of buffers on the parent GPU when multi-GPU is used.

This removes support for export_dmabuf on secondary GPUs, but renderer
v6 will bring this back by managing the swapchains in wlr_output instead
of the backends.
2021-01-10 11:24:35 +01:00
Simon Ser 5b1b43c68c backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointers
This will be useful once we start re-using wlr_drm_fb.
2021-01-10 11:24:35 +01:00
Simon Ser adfb7cd35a backend/drm: stash pending page-flip CRTC
wlr_drm_connector.crtc may be updated by the DRM backend while a
page-flip is pending. In this case, the page-flip handler won't be able
to find the right wlr_drm_connector from the CRTC ID.

Save the CRTC when performing a page-flip to ensure we always find the
right connector when we get the event.
2021-01-03 19:35:02 +01:00