TUN-3375: Upgrade x/text and gorilla websocket deps

go.mod

@@ -32,7 +32,7 @@ require (
 	github.com/golang-collections/collections v0.0.0-20130729185459-604e922904d3
 	github.com/google/uuid v1.1.1
 	github.com/gorilla/mux v1.7.3
-	github.com/gorilla/websocket v1.4.0
+	github.com/gorilla/websocket v1.4.2
 	github.com/grpc-ecosystem/grpc-opentracing v0.0.0-20180507213350-8e809c8a8645 // indirect
 	github.com/jmoiron/sqlx v1.2.0
 	github.com/konsorten/go-windows-terminal-sequences v1.0.2 // indirect
@@ -63,6 +63,7 @@ require (
 	golang.org/x/oauth2 v0.0.0-20190604053449-0f29369cfe45 // indirect
 	golang.org/x/sync v0.0.0-20190423024810-112230192c58
 	golang.org/x/sys v0.0.0-20200625212154-ddb9806d33ae
+	golang.org/x/text v0.3.3 // indirect
 	google.golang.org/appengine v1.5.0 // indirect
 	google.golang.org/genproto v0.0.0-20191007204434-a023cd5227bd // indirect
 	google.golang.org/grpc v1.24.0 // indirect

go.sum

@@ -102,6 +102,8 @@ github.com/gorilla/mux v1.7.3 h1:gnP5JzjVOuiZD07fKKToCAOjS0yOpj/qPETTXCCS6hw=
 github.com/gorilla/mux v1.7.3/go.mod h1:1lud6UwP+6orDFRuTfBEV8e9/aOM/c4fVVCaMa2zaAs=
 github.com/gorilla/websocket v1.4.0 h1:WDFjx/TMzVgy9VdMMQi2K2Emtwi2QcUQsztZ/zLaH/Q=
 github.com/gorilla/websocket v1.4.0/go.mod h1:E7qHFY5m1UJ88s3WnNqhKjPHQ0heANvMoAMk2YaljkQ=
+github.com/gorilla/websocket v1.4.2 h1:+/TMaTYc4QFitKJxsQ7Yye35DkWvkdLcvGKqM+x0Ufc=
+github.com/gorilla/websocket v1.4.2/go.mod h1:YR8l580nyteQvAITg2hZ9XVh4b55+EU/adAjf1fMHhE=
 github.com/grpc-ecosystem/grpc-opentracing v0.0.0-20180507213350-8e809c8a8645 h1:MJG/KsmcqMwFAkh8mTnAwhyKoB+sTAnY4CACC110tbU=
 github.com/grpc-ecosystem/grpc-opentracing v0.0.0-20180507213350-8e809c8a8645/go.mod h1:6iZfnjpejD4L/4DwD7NryNaJyCQdzwWwH2MWhCA90Kw=
 github.com/jessevdk/go-flags v1.4.0/go.mod h1:4FA24M0QyGHXBuZZK/XkWh8h0e1EYbRYJSGM75WSRxI=
@@ -265,6 +267,8 @@ golang.org/x/text v0.3.0 h1:g61tztE5qeGQ89tm6NTjjM9VPIm088od1l6aSorWRWg=
 golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.2 h1:tW2bmiBqwgJj/UpqtC8EpXEZVYOwU0yG4iWbprSVAcs=
 golang.org/x/text v0.3.2/go.mod h1:bEr9sfX3Q8Zfm5fL9x+3itogRgK3+ptLWKqgva+5dAk=
+golang.org/x/text v0.3.3 h1:cokOdA+Jmi5PJGXLlLllQSgYigAEfHXJAERHVMaCc2k=
+golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
 golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
 golang.org/x/tools v0.0.0-20190114222345-bf090417da8b/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
 golang.org/x/tools v0.0.0-20190221204921-83362c3779f5/go.mod h1:9Yl7xja0Znq3iFh3HoIrodX9oNMXvdceNzlUR8zjMvY=

vendor/github.com/gorilla/websocket/.travis.yml

@@ -1,19 +0,0 @@
-language: go
-sudo: false
-
-matrix:
-  include:
-    - go: 1.7.x
-    - go: 1.8.x
-    - go: 1.9.x
-    - go: 1.10.x
-    - go: 1.11.x
-    - go: tip
-  allow_failures:
-    - go: tip
-
-script:
-  - go get -t -v ./...
-  - diff -u <(echo -n) <(gofmt -d .)
-  - go vet $(go list ./... | grep -v /vendor/)
-  - go test -v -race ./...

vendor/github.com/gorilla/websocket/README.md

@@ -1,14 +1,14 @@
 # Gorilla WebSocket
 
+[![GoDoc](https://godoc.org/github.com/gorilla/websocket?status.svg)](https://godoc.org/github.com/gorilla/websocket)
+[![CircleCI](https://circleci.com/gh/gorilla/websocket.svg?style=svg)](https://circleci.com/gh/gorilla/websocket)
+
 Gorilla WebSocket is a [Go](http://golang.org/) implementation of the
 [WebSocket](http://www.rfc-editor.org/rfc/rfc6455.txt) protocol.
 
-[![Build Status](https://travis-ci.org/gorilla/websocket.svg?branch=master)](https://travis-ci.org/gorilla/websocket)
-[![GoDoc](https://godoc.org/github.com/gorilla/websocket?status.svg)](https://godoc.org/github.com/gorilla/websocket)
-
 ### Documentation
 
-* [API Reference](http://godoc.org/github.com/gorilla/websocket)
+* [API Reference](https://pkg.go.dev/github.com/gorilla/websocket?tab=doc)
 * [Chat example](https://github.com/gorilla/websocket/tree/master/examples/chat)
 * [Command example](https://github.com/gorilla/websocket/tree/master/examples/command)
 * [Client and server example](https://github.com/gorilla/websocket/tree/master/examples/echo)
@@ -27,7 +27,7 @@ package API is stable.
 ### Protocol Compliance
 
 The Gorilla WebSocket package passes the server tests in the [Autobahn Test
-Suite](http://autobahn.ws/testsuite) using the application in the [examples/autobahn
+Suite](https://github.com/crossbario/autobahn-testsuite) using the application in the [examples/autobahn
 subdirectory](https://github.com/gorilla/websocket/tree/master/examples/autobahn).
 
 ### Gorilla WebSocket compared with other packages
@@ -40,7 +40,7 @@ subdirectory](https://github.com/gorilla/websocket/tree/master/examples/autobahn
 </tr>
 <tr>
 <tr><td colspan="3"><a href="http://tools.ietf.org/html/rfc6455">RFC 6455</a> Features</td></tr>
-<tr><td>Passes <a href="http://autobahn.ws/testsuite/">Autobahn Test Suite</a></td><td><a href="https://github.com/gorilla/websocket/tree/master/examples/autobahn">Yes</a></td><td>No</td></tr>
+<tr><td>Passes <a href="https://github.com/crossbario/autobahn-testsuite">Autobahn Test Suite</a></td><td><a href="https://github.com/gorilla/websocket/tree/master/examples/autobahn">Yes</a></td><td>No</td></tr>
 <tr><td>Receive <a href="https://tools.ietf.org/html/rfc6455#section-5.4">fragmented</a> message<td>Yes</td><td><a href="https://code.google.com/p/go/issues/detail?id=7632">No</a>, see note 1</td></tr>
 <tr><td>Send <a href="https://tools.ietf.org/html/rfc6455#section-5.5.1">close</a> message</td><td><a href="http://godoc.org/github.com/gorilla/websocket#hdr-Control_Messages">Yes</a></td><td><a href="https://code.google.com/p/go/issues/detail?id=4588">No</a></td></tr>
 <tr><td>Send <a href="https://tools.ietf.org/html/rfc6455#section-5.5.2">pings</a> and receive <a href="https://tools.ietf.org/html/rfc6455#section-5.5.3">pongs</a></td><td><a href="http://godoc.org/github.com/gorilla/websocket#hdr-Control_Messages">Yes</a></td><td>No</td></tr>

vendor/github.com/gorilla/websocket/client.go

@@ -70,7 +70,7 @@ type Dialer struct {
 	// HandshakeTimeout specifies the duration for the handshake to complete.
 	HandshakeTimeout time.Duration
 
-	// ReadBufferSize and WriteBufferSize specify I/O buffer sizes. If a buffer
+	// ReadBufferSize and WriteBufferSize specify I/O buffer sizes in bytes. If a buffer
 	// size is zero, then a useful default size is used. The I/O buffer sizes
 	// do not limit the size of the messages that can be sent or received.
 	ReadBufferSize, WriteBufferSize int
@@ -140,7 +140,7 @@ var nilDialer = *DefaultDialer
 // Use the response.Header to get the selected subprotocol
 // (Sec-WebSocket-Protocol) and cookies (Set-Cookie).
 //
-// The context will be used in the request and in the Dialer
+// The context will be used in the request and in the Dialer.
 //
 // If the WebSocket handshake fails, ErrBadHandshake is returned along with a
 // non-nil *http.Response so that callers can handle redirects, authentication,

vendor/github.com/gorilla/websocket/conn.go

@@ -244,8 +244,8 @@ type Conn struct {
 	subprotocol string
 
 	// Write fields
-	mu            chan bool // used as mutex to protect write to conn
+	mu            chan struct{} // used as mutex to protect write to conn
-	writeBuf      []byte    // frame is constructed in this buffer.
+	writeBuf      []byte        // frame is constructed in this buffer.
 	writePool     BufferPool
 	writeBufSize  int
 	writeDeadline time.Time
@@ -260,10 +260,12 @@ type Conn struct {
 	newCompressionWriter   func(io.WriteCloser, int) io.WriteCloser
 
 	// Read fields
-	reader        io.ReadCloser // the current reader returned to the application
+	reader  io.ReadCloser // the current reader returned to the application
-	readErr       error
+	readErr error
-	br            *bufio.Reader
+	br      *bufio.Reader
-	readRemaining int64 // bytes remaining in current frame.
+	// bytes remaining in current frame.
+	// set setReadRemaining to safely update this value and prevent overflow
+	readRemaining int64
 	readFinal     bool  // true the current message has more frames.
 	readLength    int64 // Message size.
 	readLimit     int64 // Maximum message size.
@@ -300,8 +302,8 @@ func newConn(conn net.Conn, isServer bool, readBufferSize, writeBufferSize int,
 		writeBuf = make([]byte, writeBufferSize)
 	}
 
-	mu := make(chan bool, 1)
+	mu := make(chan struct{}, 1)
-	mu <- true
+	mu <- struct{}{}
 	c := &Conn{
 		isServer:               isServer,
 		br:                     br,
@@ -320,6 +322,17 @@ func newConn(conn net.Conn, isServer bool, readBufferSize, writeBufferSize int,
 	return c
 }
 
+// setReadRemaining tracks the number of bytes remaining on the connection. If n
+// overflows, an ErrReadLimit is returned.
+func (c *Conn) setReadRemaining(n int64) error {
+	if n < 0 {
+		return ErrReadLimit
+	}
+
+	c.readRemaining = n
+	return nil
+}
+
 // Subprotocol returns the negotiated protocol for the connection.
 func (c *Conn) Subprotocol() string {
 	return c.subprotocol
@@ -364,7 +377,7 @@ func (c *Conn) read(n int) ([]byte, error) {
 
 func (c *Conn) write(frameType int, deadline time.Time, buf0, buf1 []byte) error {
 	<-c.mu
-	defer func() { c.mu <- true }()
+	defer func() { c.mu <- struct{}{} }()
 
 	c.writeErrMu.Lock()
 	err := c.writeErr
@@ -416,7 +429,7 @@ func (c *Conn) WriteControl(messageType int, data []byte, deadline time.Time) er
 		maskBytes(key, 0, buf[6:])
 	}
 
-	d := time.Hour * 1000
+	d := 1000 * time.Hour
 	if !deadline.IsZero() {
 		d = deadline.Sub(time.Now())
 		if d < 0 {
@@ -431,7 +444,7 @@ func (c *Conn) WriteControl(messageType int, data []byte, deadline time.Time) er
 	case <-timer.C:
 		return errWriteTimeout
 	}
-	defer func() { c.mu <- true }()
+	defer func() { c.mu <- struct{}{} }()
 
 	c.writeErrMu.Lock()
 	err := c.writeErr
@@ -451,7 +464,8 @@ func (c *Conn) WriteControl(messageType int, data []byte, deadline time.Time) er
 	return err
 }
 
-func (c *Conn) prepWrite(messageType int) error {
+// beginMessage prepares a connection and message writer for a new message.
+func (c *Conn) beginMessage(mw *messageWriter, messageType int) error {
 	// Close previous writer if not already closed by the application. It's
 	// probably better to return an error in this situation, but we cannot
 	// change this without breaking existing applications.
@@ -471,6 +485,10 @@ func (c *Conn) prepWrite(messageType int) error {
 		return err
 	}
 
+	mw.c = c
+	mw.frameType = messageType
+	mw.pos = maxFrameHeaderSize
+
 	if c.writeBuf == nil {
 		wpd, ok := c.writePool.Get().(writePoolData)
 		if ok {
@@ -491,16 +509,11 @@ func (c *Conn) prepWrite(messageType int) error {
 // All message types (TextMessage, BinaryMessage, CloseMessage, PingMessage and
 // PongMessage) are supported.
 func (c *Conn) NextWriter(messageType int) (io.WriteCloser, error) {
-	if err := c.prepWrite(messageType); err != nil {
+	var mw messageWriter
+	if err := c.beginMessage(&mw, messageType); err != nil {
 		return nil, err
 	}
-
+	c.writer = &mw
-	mw := &messageWriter{
-		c:         c,
-		frameType: messageType,
-		pos:       maxFrameHeaderSize,
-	}
-	c.writer = mw
 	if c.newCompressionWriter != nil && c.enableWriteCompression && isData(messageType) {
 		w := c.newCompressionWriter(c.writer, c.compressionLevel)
 		mw.compress = true
@@ -517,10 +530,16 @@ type messageWriter struct {
 	err       error
 }
 
-func (w *messageWriter) fatal(err error) error {
+func (w *messageWriter) endMessage(err error) error {
 	if w.err != nil {
-		w.err = err
+		return err
-		w.c.writer = nil
+	}
+	c := w.c
+	w.err = err
+	c.writer = nil
+	if c.writePool != nil {
+		c.writePool.Put(writePoolData{buf: c.writeBuf})
+		c.writeBuf = nil
 	}
 	return err
 }
@@ -534,7 +553,7 @@ func (w *messageWriter) flushFrame(final bool, extra []byte) error {
 	// Check for invalid control frames.
 	if isControl(w.frameType) &&
 		(!final || length > maxControlFramePayloadSize) {
-		return w.fatal(errInvalidControlFrame)
+		return w.endMessage(errInvalidControlFrame)
 	}
 
 	b0 := byte(w.frameType)
@@ -579,7 +598,7 @@ func (w *messageWriter) flushFrame(final bool, extra []byte) error {
 		copy(c.writeBuf[maxFrameHeaderSize-4:], key[:])
 		maskBytes(key, 0, c.writeBuf[maxFrameHeaderSize:w.pos])
 		if len(extra) > 0 {
-			return c.writeFatal(errors.New("websocket: internal error, extra used in client mode"))
+			return w.endMessage(c.writeFatal(errors.New("websocket: internal error, extra used in client mode")))
 		}
 	}
 
@@ -600,15 +619,11 @@ func (w *messageWriter) flushFrame(final bool, extra []byte) error {
 	c.isWriting = false
 
 	if err != nil {
-		return w.fatal(err)
+		return w.endMessage(err)
 	}
 
 	if final {
-		c.writer = nil
+		w.endMessage(errWriteClosed)
-		if c.writePool != nil {
-			c.writePool.Put(writePoolData{buf: c.writeBuf})
-			c.writeBuf = nil
-		}
 		return nil
 	}
 
@@ -706,11 +721,7 @@ func (w *messageWriter) Close() error {
 	if w.err != nil {
 		return w.err
 	}
-	if err := w.flushFrame(true, nil); err != nil {
+	return w.flushFrame(true, nil)
-		return err
-	}
-	w.err = errWriteClosed
-	return nil
 }
 
 // WritePreparedMessage writes prepared message into connection.
@@ -742,10 +753,10 @@ func (c *Conn) WriteMessage(messageType int, data []byte) error {
 	if c.isServer && (c.newCompressionWriter == nil || !c.enableWriteCompression) {
 		// Fast path with no allocations and single frame.
 
-		if err := c.prepWrite(messageType); err != nil {
+		var mw messageWriter
+		if err := c.beginMessage(&mw, messageType); err != nil {
 			return err
 		}
-		mw := messageWriter{c: c, frameType: messageType, pos: maxFrameHeaderSize}
 		n := copy(c.writeBuf[mw.pos:], data)
 		mw.pos += n
 		data = data[n:]
@@ -792,7 +803,7 @@ func (c *Conn) advanceFrame() (int, error) {
 	final := p[0]&finalBit != 0
 	frameType := int(p[0] & 0xf)
 	mask := p[1]&maskBit != 0
-	c.readRemaining = int64(p[1] & 0x7f)
+	c.setReadRemaining(int64(p[1] & 0x7f))
 
 	c.readDecompress = false
 	if c.newDecompressionReader != nil && (p[0]&rsv1Bit) != 0 {
@@ -826,7 +837,17 @@ func (c *Conn) advanceFrame() (int, error) {
 		return noFrame, c.handleProtocolError("unknown opcode " + strconv.Itoa(frameType))
 	}
 
-	// 3. Read and parse frame length.
+	// 3. Read and parse frame length as per
+	// https://tools.ietf.org/html/rfc6455#section-5.2
+	//
+	// The length of the "Payload data", in bytes: if 0-125, that is the payload
+	// length.
+	// - If 126, the following 2 bytes interpreted as a 16-bit unsigned
+	// integer are the payload length.
+	// - If 127, the following 8 bytes interpreted as
+	// a 64-bit unsigned integer (the most significant bit MUST be 0) are the
+	// payload length. Multibyte length quantities are expressed in network byte
+	// order.
 
 	switch c.readRemaining {
 	case 126:
@@ -834,13 +855,19 @@ func (c *Conn) advanceFrame() (int, error) {
 		if err != nil {
 			return noFrame, err
 		}
-		c.readRemaining = int64(binary.BigEndian.Uint16(p))
+
+		if err := c.setReadRemaining(int64(binary.BigEndian.Uint16(p))); err != nil {
+			return noFrame, err
+		}
 	case 127:
 		p, err := c.read(8)
 		if err != nil {
 			return noFrame, err
 		}
-		c.readRemaining = int64(binary.BigEndian.Uint64(p))
+
+		if err := c.setReadRemaining(int64(binary.BigEndian.Uint64(p))); err != nil {
+			return noFrame, err
+		}
 	}
 
 	// 4. Handle frame masking.
@@ -863,6 +890,12 @@ func (c *Conn) advanceFrame() (int, error) {
 	if frameType == continuationFrame || frameType == TextMessage || frameType == BinaryMessage {
 
 		c.readLength += c.readRemaining
+		// Don't allow readLength to overflow in the presence of a large readRemaining
+		// counter.
+		if c.readLength < 0 {
+			return noFrame, ErrReadLimit
+		}
+
 		if c.readLimit > 0 && c.readLength > c.readLimit {
 			c.WriteControl(CloseMessage, FormatCloseMessage(CloseMessageTooBig, ""), time.Now().Add(writeWait))
 			return noFrame, ErrReadLimit
@@ -876,7 +909,7 @@ func (c *Conn) advanceFrame() (int, error) {
 	var payload []byte
 	if c.readRemaining > 0 {
 		payload, err = c.read(int(c.readRemaining))
-		c.readRemaining = 0
+		c.setReadRemaining(0)
 		if err != nil {
 			return noFrame, err
 		}
@@ -949,6 +982,7 @@ func (c *Conn) NextReader() (messageType int, r io.Reader, err error) {
 			c.readErr = hideTempErr(err)
 			break
 		}
+
 		if frameType == TextMessage || frameType == BinaryMessage {
 			c.messageReader = &messageReader{c}
 			c.reader = c.messageReader
@@ -989,7 +1023,9 @@ func (r *messageReader) Read(b []byte) (int, error) {
 			if c.isServer {
 				c.readMaskPos = maskBytes(c.readMaskKey, c.readMaskPos, b[:n])
 			}
-			c.readRemaining -= int64(n)
+			rem := c.readRemaining
+			rem -= int64(n)
+			c.setReadRemaining(rem)
 			if c.readRemaining > 0 && c.readErr == io.EOF {
 				c.readErr = errUnexpectedEOF
 			}
@@ -1041,7 +1077,7 @@ func (c *Conn) SetReadDeadline(t time.Time) error {
 	return c.conn.SetReadDeadline(t)
 }
 
-// SetReadLimit sets the maximum size for a message read from the peer. If a
+// SetReadLimit sets the maximum size in bytes for a message read from the peer. If a
 // message exceeds the limit, the connection sends a close message to the peer
 // and returns ErrReadLimit to the application.
 func (c *Conn) SetReadLimit(limit int64) {

vendor/github.com/gorilla/websocket/doc.go

@@ -151,6 +151,53 @@
 // checking. The application is responsible for checking the Origin header
 // before calling the Upgrade function.
 //
+// Buffers
+//
+// Connections buffer network input and output to reduce the number
+// of system calls when reading or writing messages.
+//
+// Write buffers are also used for constructing WebSocket frames. See RFC 6455,
+// Section 5 for a discussion of message framing. A WebSocket frame header is
+// written to the network each time a write buffer is flushed to the network.
+// Decreasing the size of the write buffer can increase the amount of framing
+// overhead on the connection.
+//
+// The buffer sizes in bytes are specified by the ReadBufferSize and
+// WriteBufferSize fields in the Dialer and Upgrader. The Dialer uses a default
+// size of 4096 when a buffer size field is set to zero. The Upgrader reuses
+// buffers created by the HTTP server when a buffer size field is set to zero.
+// The HTTP server buffers have a size of 4096 at the time of this writing.
+//
+// The buffer sizes do not limit the size of a message that can be read or
+// written by a connection.
+//
+// Buffers are held for the lifetime of the connection by default. If the
+// Dialer or Upgrader WriteBufferPool field is set, then a connection holds the
+// write buffer only when writing a message.
+//
+// Applications should tune the buffer sizes to balance memory use and
+// performance. Increasing the buffer size uses more memory, but can reduce the
+// number of system calls to read or write the network. In the case of writing,
+// increasing the buffer size can reduce the number of frame headers written to
+// the network.
+//
+// Some guidelines for setting buffer parameters are:
+//
+// Limit the buffer sizes to the maximum expected message size. Buffers larger
+// than the largest message do not provide any benefit.
+//
+// Depending on the distribution of message sizes, setting the buffer size to
+// a value less than the maximum expected message size can greatly reduce memory
+// use with a small impact on performance. Here's an example: If 99% of the
+// messages are smaller than 256 bytes and the maximum message size is 512
+// bytes, then a buffer size of 256 bytes will result in 1.01 more system calls
+// than a buffer size of 512 bytes. The memory savings is 50%.
+//
+// A write buffer pool is useful when the application has a modest number
+// writes over a large number of connections. when buffers are pooled, a larger
+// buffer size has a reduced impact on total memory use and has the benefit of
+// reducing system calls and frame overhead.
+//
 // Compression EXPERIMENTAL
 //
 // Per message compression extensions (RFC 7692) are experimentally supported

vendor/github.com/gorilla/websocket/go.mod

@@ -0,0 +1,3 @@
+module github.com/gorilla/websocket
+
+go 1.12

vendor/github.com/gorilla/websocket/join.go

@@ -0,0 +1,42 @@
+// Copyright 2019 The Gorilla WebSocket Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package websocket
+
+import (
+	"io"
+	"strings"
+)
+
+// JoinMessages concatenates received messages to create a single io.Reader.
+// The string term is appended to each message. The returned reader does not
+// support concurrent calls to the Read method.
+func JoinMessages(c *Conn, term string) io.Reader {
+	return &joinReader{c: c, term: term}
+}
+
+type joinReader struct {
+	c    *Conn
+	term string
+	r    io.Reader
+}
+
+func (r *joinReader) Read(p []byte) (int, error) {
+	if r.r == nil {
+		var err error
+		_, r.r, err = r.c.NextReader()
+		if err != nil {
+			return 0, err
+		}
+		if r.term != "" {
+			r.r = io.MultiReader(r.r, strings.NewReader(r.term))
+		}
+	}
+	n, err := r.r.Read(p)
+	if err == io.EOF {
+		err = nil
+		r.r = nil
+	}
+	return n, err
+}

vendor/github.com/gorilla/websocket/prepared.go

@@ -73,8 +73,8 @@ func (pm *PreparedMessage) frame(key prepareKey) (int, []byte, error) {
 		// Prepare a frame using a 'fake' connection.
 		// TODO: Refactor code in conn.go to allow more direct construction of
 		// the frame.
-		mu := make(chan bool, 1)
+		mu := make(chan struct{}, 1)
-		mu <- true
+		mu <- struct{}{}
 		var nc prepareConn
 		c := &Conn{
 			conn:                   &nc,

vendor/github.com/gorilla/websocket/proxy.go

@@ -22,18 +22,18 @@ func (fn netDialerFunc) Dial(network, addr string) (net.Conn, error) {
 
 func init() {
 	proxy_RegisterDialerType("http", func(proxyURL *url.URL, forwardDialer proxy_Dialer) (proxy_Dialer, error) {
-		return &httpProxyDialer{proxyURL: proxyURL, fowardDial: forwardDialer.Dial}, nil
+		return &httpProxyDialer{proxyURL: proxyURL, forwardDial: forwardDialer.Dial}, nil
 	})
 }
 
 type httpProxyDialer struct {
-	proxyURL   *url.URL
+	proxyURL    *url.URL
-	fowardDial func(network, addr string) (net.Conn, error)
+	forwardDial func(network, addr string) (net.Conn, error)
 }
 
 func (hpd *httpProxyDialer) Dial(network string, addr string) (net.Conn, error) {
 	hostPort, _ := hostPortNoPort(hpd.proxyURL)
-	conn, err := hpd.fowardDial(network, hostPort)
+	conn, err := hpd.forwardDial(network, hostPort)
 	if err != nil {
 		return nil, err
 	}

vendor/github.com/gorilla/websocket/server.go

@@ -27,7 +27,7 @@ type Upgrader struct {
 	// HandshakeTimeout specifies the duration for the handshake to complete.
 	HandshakeTimeout time.Duration
 
-	// ReadBufferSize and WriteBufferSize specify I/O buffer sizes. If a buffer
+	// ReadBufferSize and WriteBufferSize specify I/O buffer sizes in bytes. If a buffer
 	// size is zero, then buffers allocated by the HTTP server are used. The
 	// I/O buffer sizes do not limit the size of the messages that can be sent
 	// or received.
@@ -153,7 +153,7 @@ func (u *Upgrader) Upgrade(w http.ResponseWriter, r *http.Request, responseHeade
 
 	challengeKey := r.Header.Get("Sec-Websocket-Key")
 	if challengeKey == "" {
-		return u.returnError(w, r, http.StatusBadRequest, "websocket: not a websocket handshake: `Sec-WebSocket-Key' header is missing or blank")
+		return u.returnError(w, r, http.StatusBadRequest, "websocket: not a websocket handshake: 'Sec-WebSocket-Key' header is missing or blank")
 	}
 
 	subprotocol := u.selectSubprotocol(r, responseHeader)

vendor/github.com/gorilla/websocket/util.go

@@ -31,68 +31,113 @@ func generateChallengeKey() (string, error) {
 	return base64.StdEncoding.EncodeToString(p), nil
 }
 
-// Octet types from RFC 2616.
+// Token octets per RFC 2616.
-var octetTypes [256]byte
+var isTokenOctet = [256]bool{
-
+	'!':  true,
-const (
+	'#':  true,
-	isTokenOctet = 1 << iota
+	'$':  true,
-	isSpaceOctet
+	'%':  true,
-)
+	'&':  true,
-
+	'\'': true,
-func init() {
+	'*':  true,
-	// From RFC 2616
+	'+':  true,
-	//
+	'-':  true,
-	// OCTET      = <any 8-bit sequence of data>
+	'.':  true,
-	// CHAR       = <any US-ASCII character (octets 0 - 127)>
+	'0':  true,
-	// CTL        = <any US-ASCII control character (octets 0 - 31) and DEL (127)>
+	'1':  true,
-	// CR         = <US-ASCII CR, carriage return (13)>
+	'2':  true,
-	// LF         = <US-ASCII LF, linefeed (10)>
+	'3':  true,
-	// SP         = <US-ASCII SP, space (32)>
+	'4':  true,
-	// HT         = <US-ASCII HT, horizontal-tab (9)>
+	'5':  true,
-	// <">        = <US-ASCII double-quote mark (34)>
+	'6':  true,
-	// CRLF       = CR LF
+	'7':  true,
-	// LWS        = [CRLF] 1*( SP | HT )
+	'8':  true,
-	// TEXT       = <any OCTET except CTLs, but including LWS>
+	'9':  true,
-	// separators = "(" | ")" | "<" | ">" | "@" | "," | ";" | ":" | "\" | <">
+	'A':  true,
-	//              | "/" | "[" | "]" | "?" | "=" | "{" | "}" | SP | HT
+	'B':  true,
-	// token      = 1*<any CHAR except CTLs or separators>
+	'C':  true,
-	// qdtext     = <any TEXT except <">>
+	'D':  true,
-
+	'E':  true,
-	for c := 0; c < 256; c++ {
+	'F':  true,
-		var t byte
+	'G':  true,
-		isCtl := c <= 31 || c == 127
+	'H':  true,
-		isChar := 0 <= c && c <= 127
+	'I':  true,
-		isSeparator := strings.IndexRune(" \t\"(),/:;<=>?@[]\\{}", rune(c)) >= 0
+	'J':  true,
-		if strings.IndexRune(" \t\r\n", rune(c)) >= 0 {
+	'K':  true,
-			t |= isSpaceOctet
+	'L':  true,
-		}
+	'M':  true,
-		if isChar && !isCtl && !isSeparator {
+	'N':  true,
-			t |= isTokenOctet
+	'O':  true,
-		}
+	'P':  true,
-		octetTypes[c] = t
+	'Q':  true,
-	}
+	'R':  true,
+	'S':  true,
+	'T':  true,
+	'U':  true,
+	'W':  true,
+	'V':  true,
+	'X':  true,
+	'Y':  true,
+	'Z':  true,
+	'^':  true,
+	'_':  true,
+	'`':  true,
+	'a':  true,
+	'b':  true,
+	'c':  true,
+	'd':  true,
+	'e':  true,
+	'f':  true,
+	'g':  true,
+	'h':  true,
+	'i':  true,
+	'j':  true,
+	'k':  true,
+	'l':  true,
+	'm':  true,
+	'n':  true,
+	'o':  true,
+	'p':  true,
+	'q':  true,
+	'r':  true,
+	's':  true,
+	't':  true,
+	'u':  true,
+	'v':  true,
+	'w':  true,
+	'x':  true,
+	'y':  true,
+	'z':  true,
+	'|':  true,
+	'~':  true,
 }
 
+// skipSpace returns a slice of the string s with all leading RFC 2616 linear
+// whitespace removed.
 func skipSpace(s string) (rest string) {
 	i := 0
 	for ; i < len(s); i++ {
-		if octetTypes[s[i]]&isSpaceOctet == 0 {
+		if b := s[i]; b != ' ' && b != '\t' {
 			break
 		}
 	}
 	return s[i:]
 }
 
+// nextToken returns the leading RFC 2616 token of s and the string following
+// the token.
 func nextToken(s string) (token, rest string) {
 	i := 0
 	for ; i < len(s); i++ {
-		if octetTypes[s[i]]&isTokenOctet == 0 {
+		if !isTokenOctet[s[i]] {
 			break
 		}
 	}
 	return s[:i], s[i:]
 }
 
+// nextTokenOrQuoted returns the leading token or quoted string per RFC 2616
+// and the string following the token or quoted string.
 func nextTokenOrQuoted(s string) (value string, rest string) {
 	if !strings.HasPrefix(s, "\"") {
 		return nextToken(s)
@@ -128,7 +173,8 @@ func nextTokenOrQuoted(s string) (value string, rest string) {
 	return "", ""
 }
 
-// equalASCIIFold returns true if s is equal to t with ASCII case folding.
+// equalASCIIFold returns true if s is equal to t with ASCII case folding as
+// defined in RFC 4790.
 func equalASCIIFold(s, t string) bool {
 	for s != "" && t != "" {
 		sr, size := utf8.DecodeRuneInString(s)

vendor/golang.org/x/text/transform/transform.go

@@ -78,8 +78,8 @@ type SpanningTransformer interface {
 	// considering the error err.
 	//
 	// A nil error means that all input bytes are known to be identical to the
-	// output produced by the Transformer. A nil error can be be returned
+	// output produced by the Transformer. A nil error can be returned
-	// regardless of whether atEOF is true. If err is nil, then then n must
+	// regardless of whether atEOF is true. If err is nil, then n must
 	// equal len(src); the converse is not necessarily true.
 	//
 	// ErrEndOfSpan means that the Transformer output may differ from the
@@ -493,7 +493,7 @@ func (c *chain) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err erro
 	return dstL.n, srcL.p, err
 }
 
-// Deprecated: use runes.Remove instead.
+// Deprecated: Use runes.Remove instead.
 func RemoveFunc(f func(r rune) bool) Transformer {
 	return removeF(f)
 }
@@ -648,7 +648,8 @@ func String(t Transformer, s string) (result string, n int, err error) {
 	// Transform the remaining input, growing dst and src buffers as necessary.
 	for {
 		n := copy(src, s[pSrc:])
-		nDst, nSrc, err := t.Transform(dst[pDst:], src[:n], pSrc+n == len(s))
+		atEOF := pSrc+n == len(s)
+		nDst, nSrc, err := t.Transform(dst[pDst:], src[:n], atEOF)
 		pDst += nDst
 		pSrc += nSrc
 
@@ -659,6 +660,9 @@ func String(t Transformer, s string) (result string, n int, err error) {
 				dst = grow(dst, pDst)
 			}
 		} else if err == ErrShortSrc {
+			if atEOF {
+				return string(dst[:pDst]), pSrc, err
+			}
 			if nSrc == 0 {
 				src = grow(src, 0)
 			}

vendor/golang.org/x/text/unicode/bidi/bidi.go

@@ -6,7 +6,7 @@
 
 // Package bidi contains functionality for bidirectional text support.
 //
-// See http://www.unicode.org/reports/tr9.
+// See https://www.unicode.org/reports/tr9.
 //
 // NOTE: UNDER CONSTRUCTION. This API may change in backwards incompatible ways
 // and without notice.

vendor/golang.org/x/text/unicode/bidi/bracket.go

@@ -12,7 +12,7 @@ import (
 
 // This file contains a port of the reference implementation of the
 // Bidi Parentheses Algorithm:
-// http://www.unicode.org/Public/PROGRAMS/BidiReferenceJava/BidiPBAReference.java
+// https://www.unicode.org/Public/PROGRAMS/BidiReferenceJava/BidiPBAReference.java
 //
 // The implementation in this file covers definitions BD14-BD16 and rule N0
 // of UAX#9.
@@ -246,7 +246,7 @@ func (p *bracketPairer) getStrongTypeN0(index int) Class {
 // assuming the given embedding direction.
 //
 // It returns ON if no strong type is found. If a single strong type is found,
-// it returns this this type. Otherwise it returns the embedding direction.
+// it returns this type. Otherwise it returns the embedding direction.
 //
 // TODO: use separate type for "strong" directionality.
 func (p *bracketPairer) classifyPairContent(loc bracketPair, dirEmbed Class) Class {

vendor/golang.org/x/text/unicode/bidi/core.go

@@ -7,7 +7,7 @@ package bidi
 import "log"
 
 // This implementation is a port based on the reference implementation found at:
-// http://www.unicode.org/Public/PROGRAMS/BidiReferenceJava/
+// https://www.unicode.org/Public/PROGRAMS/BidiReferenceJava/
 //
 // described in Unicode Bidirectional Algorithm (UAX #9).
 //
@@ -480,15 +480,15 @@ func (s *isolatingRunSequence) resolveWeakTypes() {
 
 	// Rule W1.
 	// Changes all NSMs.
-	preceedingCharacterType := s.sos
+	precedingCharacterType := s.sos
 	for i, t := range s.types {
 		if t == NSM {
-			s.types[i] = preceedingCharacterType
+			s.types[i] = precedingCharacterType
 		} else {
 			if t.in(LRI, RLI, FSI, PDI) {
-				preceedingCharacterType = ON
+				precedingCharacterType = ON
 			}
-			preceedingCharacterType = t
+			precedingCharacterType = t
 		}
 	}
 

vendor/golang.org/x/text/unicode/bidi/tables10.0.0.go

@@ -1,6 +1,6 @@
 // Code generated by running "go generate" in golang.org/x/text. DO NOT EDIT.
 
-// +build go1.10
+// +build go1.10,!go1.13
 
 package bidi
 

vendor/golang.org/x/text/unicode/norm/composition.go

@@ -407,7 +407,7 @@ func decomposeHangul(buf []byte, r rune) int {
 
 // decomposeHangul algorithmically decomposes a Hangul rune into
 // its Jamo components.
-// See http://unicode.org/reports/tr15/#Hangul for details on decomposing Hangul.
+// See https://unicode.org/reports/tr15/#Hangul for details on decomposing Hangul.
 func (rb *reorderBuffer) decomposeHangul(r rune) {
 	r -= hangulBase
 	x := r % jamoTCount
@@ -420,7 +420,7 @@ func (rb *reorderBuffer) decomposeHangul(r rune) {
 }
 
 // combineHangul algorithmically combines Jamo character components into Hangul.
-// See http://unicode.org/reports/tr15/#Hangul for details on combining Hangul.
+// See https://unicode.org/reports/tr15/#Hangul for details on combining Hangul.
 func (rb *reorderBuffer) combineHangul(s, i, k int) {
 	b := rb.rune[:]
 	bn := rb.nrune
@@ -461,6 +461,10 @@ func (rb *reorderBuffer) combineHangul(s, i, k int) {
 // It should only be used to recompose a single segment, as it will not
 // handle alternations between Hangul and non-Hangul characters correctly.
 func (rb *reorderBuffer) compose() {
+	// Lazily load the map used by the combine func below, but do
+	// it outside of the loop.
+	recompMapOnce.Do(buildRecompMap)
+
 	// UAX #15, section X5 , including Corrigendum #5
 	// "In any character sequence beginning with starter S, a character C is
 	//  blocked from S if and only if there is some character B between S

vendor/golang.org/x/text/unicode/norm/forminfo.go

@@ -4,6 +4,8 @@
 
 package norm
 
+import "encoding/binary"
+
 // This file contains Form-specific logic and wrappers for data in tables.go.
 
 // Rune info is stored in a separate trie per composing form. A composing form
@@ -178,6 +180,17 @@ func (p Properties) TrailCCC() uint8 {
 	return ccc[p.tccc]
 }
 
+func buildRecompMap() {
+	recompMap = make(map[uint32]rune, len(recompMapPacked)/8)
+	var buf [8]byte
+	for i := 0; i < len(recompMapPacked); i += 8 {
+		copy(buf[:], recompMapPacked[i:i+8])
+		key := binary.BigEndian.Uint32(buf[:4])
+		val := binary.BigEndian.Uint32(buf[4:])
+		recompMap[key] = rune(val)
+	}
+}
+
 // Recomposition
 // We use 32-bit keys instead of 64-bit for the two codepoint keys.
 // This clips off the bits of three entries, but we know this will not
@@ -186,8 +199,14 @@ func (p Properties) TrailCCC() uint8 {
 // Note that the recomposition map for NFC and NFKC are identical.
 
 // combine returns the combined rune or 0 if it doesn't exist.
+//
+// The caller is responsible for calling
+// recompMapOnce.Do(buildRecompMap) sometime before this is called.
 func combine(a, b rune) rune {
 	key := uint32(uint16(a))<<16 + uint32(uint16(b))
+	if recompMap == nil {
+		panic("caller error") // see func comment
+	}
 	return recompMap[key]
 }
 

vendor/golang.org/x/text/unicode/norm/iter.go

@@ -128,8 +128,9 @@ func (i *Iter) Next() []byte {
 func nextASCIIBytes(i *Iter) []byte {
 	p := i.p + 1
 	if p >= i.rb.nsrc {
+		p0 := i.p
 		i.setDone()
-		return i.rb.src.bytes[i.p:p]
+		return i.rb.src.bytes[p0:p]
 	}
 	if i.rb.src.bytes[p] < utf8.RuneSelf {
 		p0 := i.p

vendor/golang.org/x/text/unicode/norm/normalize.go

@@ -29,8 +29,8 @@ import (
 // proceed independently on both sides:
 //   f(x) == append(f(x[0:n]), f(x[n:])...)
 //
-// References: http://unicode.org/reports/tr15/ and
+// References: https://unicode.org/reports/tr15/ and
-// http://unicode.org/notes/tn5/.
+// https://unicode.org/notes/tn5/.
 type Form int
 
 const (

vendor/golang.org/x/text/unicode/norm/readwriter.go

@@ -60,8 +60,8 @@ func (w *normWriter) Close() error {
 }
 
 // Writer returns a new writer that implements Write(b)
-// by writing f(b) to w.  The returned writer may use an
+// by writing f(b) to w. The returned writer may use an
-// an internal buffer to maintain state across Write calls.
+// internal buffer to maintain state across Write calls.
 // Calling its Close method writes any buffered data to w.
 func (f Form) Writer(w io.Writer) io.WriteCloser {
 	wr := &normWriter{rb: reorderBuffer{}, w: w}

vendor/golang.org/x/text/unicode/norm/transform.go

@@ -18,7 +18,6 @@ func (Form) Reset() {}
 // Users should either catch ErrShortDst and allow dst to grow or have dst be at
 // least of size MaxTransformChunkSize to be guaranteed of progress.
 func (f Form) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error) {
-	n := 0
 	// Cap the maximum number of src bytes to check.
 	b := src
 	eof := atEOF
@@ -27,13 +26,14 @@ func (f Form) Transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error)
 		eof = false
 		b = b[:ns]
 	}
-	i, ok := formTable[f].quickSpan(inputBytes(b), n, len(b), eof)
+	i, ok := formTable[f].quickSpan(inputBytes(b), 0, len(b), eof)
-	n += copy(dst[n:], b[n:i])
+	n := copy(dst, b[:i])
 	if !ok {
 		nDst, nSrc, err = f.transform(dst[n:], src[n:], atEOF)
 		return nDst + n, nSrc + n, err
 	}
-	if n < len(src) && !atEOF {
+
+	if err == nil && n < len(src) && !atEOF {
 		err = transform.ErrShortSrc
 	}
 	return n, n, err
@@ -79,7 +79,7 @@ func (f Form) transform(dst, src []byte, atEOF bool) (nDst, nSrc int, err error)
 		nSrc += n
 		nDst += n
 		if ok {
-			if n < rb.nsrc && !atEOF {
+			if err == nil && n < rb.nsrc && !atEOF {
 				err = transform.ErrShortSrc
 			}
 			return nDst, nSrc, err

vendor/modules.txt

@@ -131,7 +131,7 @@ github.com/golang/protobuf/ptypes/timestamp
 github.com/google/uuid
 # github.com/gorilla/mux v1.7.3
 github.com/gorilla/mux
-# github.com/gorilla/websocket v1.4.0
+# github.com/gorilla/websocket v1.4.2
 github.com/gorilla/websocket
 # github.com/grpc-ecosystem/grpc-opentracing v0.0.0-20180507213350-8e809c8a8645
 github.com/grpc-ecosystem/grpc-opentracing/go/otgrpc
@@ -251,7 +251,7 @@ golang.org/x/sys/windows/registry
 golang.org/x/sys/windows/svc
 golang.org/x/sys/windows/svc/eventlog
 golang.org/x/sys/windows/svc/mgr
-# golang.org/x/text v0.3.0
+# golang.org/x/text v0.3.3
 golang.org/x/text/secure/bidirule
 golang.org/x/text/transform
 golang.org/x/text/unicode/bidi