TUN-6010: Add component tests for --edge-ip-version

component-tests/cli.py

@@ -0,0 +1,95 @@
+import json
+import subprocess
+from time import sleep
+
+from setup import get_config_from_file
+
+SINGLE_CASE_TIMEOUT = 600
+
+class CloudflaredCli:
+    def __init__(self, config, config_path, logger):
+        self.basecmd = [config.cloudflared_binary, "tunnel"]
+        if config_path is not None:
+            self.basecmd += ["--config", str(config_path)]
+        origincert = get_config_from_file()["origincert"]
+        if origincert:
+            self.basecmd += ["--origincert", origincert]
+        self.logger = logger
+
+    def _run_command(self, subcmd, subcmd_name, needs_to_pass=True):
+        cmd = self.basecmd + subcmd
+        # timeout limits the time a subprocess can run. This is useful to guard against running a tunnel when
+        # command/args are in wrong order.
+        result = run_subprocess(cmd, subcmd_name, self.logger, check=needs_to_pass, capture_output=True, timeout=15)
+        return result
+
+    def list_tunnels(self):
+        cmd_args = ["list", "--output", "json"]
+        listed = self._run_command(cmd_args, "list")
+        return json.loads(listed.stdout)
+
+    def get_tunnel_info(self, tunnel_id):
+        info = self._run_command(["info", "--output", "json", tunnel_id], "info")
+        return json.loads(info.stdout)
+
+    def __enter__(self):
+        self.basecmd += ["run"]
+        self.process = subprocess.Popen(self.basecmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+        self.logger.info(f"Run cmd {self.basecmd}")
+        return self.process
+
+    def __exit__(self, exc_type, exc_value, exc_traceback):
+        terminate_gracefully(self.process, self.logger, self.basecmd)
+        self.logger.debug(f"{self.basecmd} logs: {self.process.stderr.read()}")
+
+
+def terminate_gracefully(process, logger, cmd):
+    process.terminate()
+    process_terminated = wait_for_terminate(process)
+    if not process_terminated:
+        process.kill()
+        logger.warning(f"{cmd}: cloudflared did not terminate within wait period. Killing process. logs: \
+                stdout: {process.stdout.read()}, stderr: {process.stderr.read()}")
+
+
+def wait_for_terminate(opened_subprocess, attempts=10, poll_interval=1):
+    """
+        wait_for_terminate polls the opened_subprocess every x seconds for a given number of attempts.
+        It returns true if the subprocess was terminated and false if it didn't.
+    """
+    for _ in range(attempts):
+        if _is_process_stopped(opened_subprocess):
+            return True
+        sleep(poll_interval)
+    return False
+
+
+def _is_process_stopped(process):
+    return process.poll() is not None
+
+
+def cert_path():
+    return get_config_from_file()["origincert"]
+
+
+class SubprocessError(Exception):
+    def __init__(self, program, exit_code, cause):
+        self.program = program
+        self.exit_code = exit_code
+        self.cause = cause
+
+
+def run_subprocess(cmd, cmd_name, logger, timeout=SINGLE_CASE_TIMEOUT, **kargs):
+    kargs["timeout"] = timeout
+    try:
+        result = subprocess.run(cmd, **kargs)
+        logger.debug(f"{cmd} log: {result.stdout}", extra={"cmd": cmd_name})
+        return result
+    except subprocess.CalledProcessError as e:
+        err = f"{cmd} return exit code {e.returncode}, stderr" + e.stderr.decode("utf-8")
+        logger.error(err, extra={"cmd": cmd_name, "return_code": e.returncode})
+        raise SubprocessError(cmd[0], e.returncode, e)
+    except subprocess.TimeoutExpired as e:
+        err = f"{cmd} timeout after {e.timeout} seconds, stdout: {e.stdout}, stderr: {e.stderr}"
+        logger.error(err, extra={"cmd": cmd_name, "return_code": "timeout"})
+        raise e

component-tests/test_edge_discovery.py

@@ -0,0 +1,165 @@
+import ipaddress
+import socket
+
+import pytest
+
+from constants import protocols
+from cli import CloudflaredCli
+from util import get_tunnel_connector_id, LOGGER, wait_tunnel_ready, write_config
+
+
+class TestEdgeDiscovery:
+    def _extra_config(self, protocol, edge_ip_version):
+        config = {
+            "protocol": protocol,
+        }
+        if edge_ip_version:
+            config["edge-ip-version"] = edge_ip_version
+        return config
+
+    @pytest.mark.parametrize("protocol", protocols())
+    def test_default_only(self, tmp_path, component_tests_config, protocol):
+        """
+        This test runs a tunnel to connect via IPv4-only edge addresses (default is unset "--edge-ip-version 4")
+        """
+        if self.has_ipv6_only():
+            pytest.skip("Host has IPv6 only support and current default is IPv4 only")
+        self.expect_address_connections(
+            tmp_path, component_tests_config, protocol, None, self.expect_ipv4_address)
+
+    @pytest.mark.parametrize("protocol", protocols())
+    def test_ipv4_only(self, tmp_path, component_tests_config, protocol):
+        """
+        This test runs a tunnel to connect via IPv4-only edge addresses
+        """
+        if self.has_ipv6_only():
+            pytest.skip("Host has IPv6 only support")
+        self.expect_address_connections(
+            tmp_path, component_tests_config, protocol, "4", self.expect_ipv4_address)
+
+    @pytest.mark.parametrize("protocol", protocols())
+    def test_ipv6_only(self, tmp_path, component_tests_config, protocol):
+        """
+        This test runs a tunnel to connect via IPv6-only edge addresses
+        """
+        if self.has_ipv4_only():
+            pytest.skip("Host has IPv4 only support")
+        self.expect_address_connections(
+            tmp_path, component_tests_config, protocol, "6", self.expect_ipv6_address)
+
+    @pytest.mark.parametrize("protocol", protocols())
+    def test_auto_ip64(self, tmp_path, component_tests_config, protocol):
+        """
+        This test runs a tunnel to connect via auto with a preference of IPv6 then IPv4 addresses for a dual stack host
+
+        This test also assumes that the host has IPv6 preference.
+        """
+        if not self.has_dual_stack(address_family_preference=socket.AddressFamily.AF_INET6):
+            pytest.skip("Host does not support dual stack with IPv6 preference")
+        self.expect_address_connections(
+            tmp_path, component_tests_config, protocol, "auto", self.expect_ipv6_address)
+
+    @pytest.mark.parametrize("protocol", protocols())
+    def test_auto_ip46(self, tmp_path, component_tests_config, protocol):
+        """
+        This test runs a tunnel to connect via auto with a preference of IPv4 then IPv6 addresses for a dual stack host
+
+        This test also assumes that the host has IPv4 preference.
+        """
+        if not self.has_dual_stack(address_family_preference=socket.AddressFamily.AF_INET):
+            pytest.skip("Host does not support dual stack with IPv4 preference")
+        self.expect_address_connections(
+            tmp_path, component_tests_config, protocol, "auto", self.expect_ipv4_address)
+
+    def expect_address_connections(self, tmp_path, component_tests_config, protocol, edge_ip_version, assert_address_type):
+        config = component_tests_config(
+            self._extra_config(protocol, edge_ip_version))
+        config_path = write_config(tmp_path, config.full_config)
+        LOGGER.debug(config)
+        with CloudflaredCli(config, config_path, LOGGER):
+            wait_tunnel_ready(tunnel_url=config.get_url(),
+                              require_min_connections=4)
+            cfd_cli = CloudflaredCli(config, config_path, LOGGER)
+            tunnel_id = config.get_tunnel_id()
+            info = cfd_cli.get_tunnel_info(tunnel_id)
+            connector_id = get_tunnel_connector_id()
+            connector = next(
+                (c for c in info["conns"] if c["id"] == connector_id), None)
+            assert connector, f"Expected connection info from get tunnel info for the connected instance: {info}"
+            conns = connector["conns"]
+            assert conns == None or len(
+                conns) == 4, f"There should be 4 connections registered: {conns}"
+            for conn in conns:
+                origin_ip = conn["origin_ip"]
+                assert origin_ip, f"No available origin_ip for this connection: {conn}"
+                assert_address_type(origin_ip)
+
+    def expect_ipv4_address(self, address):
+        assert type(ipaddress.ip_address(
+            address)) is ipaddress.IPv4Address, f"Expected connection from origin to be a valid IPv4 address: {address}"
+
+    def expect_ipv6_address(self, address):
+        assert type(ipaddress.ip_address(
+            address)) is ipaddress.IPv6Address, f"Expected connection from origin to be a valid IPv6 address: {address}"
+
+    def get_addresses(self):
+        """
+        Returns a list of addresses for the host.
+        """
+        host_addresses = socket.getaddrinfo(
+            "region1.v2.argotunnel.com", 7844, socket.AF_UNSPEC, socket.SOCK_STREAM)
+        assert len(
+            host_addresses) > 0, "No addresses returned from getaddrinfo"
+        return host_addresses
+
+    def has_dual_stack(self, address_family_preference=None):
+        """
+        Returns true if the host has dual stack support and can optionally check 
+        the provided IP family preference.
+        """
+        dual_stack = not self.has_ipv6_only() and not self.has_ipv4_only()
+        if address_family_preference:
+            address = self.get_addresses()[0]
+            return dual_stack and address[0] == address_family_preference
+
+        return dual_stack
+
+    def has_ipv6_only(self):
+        """
+        Returns True if the host has only IPv6 address support.
+        """
+        return self.attempt_connection(socket.AddressFamily.AF_INET6) and not self.attempt_connection(socket.AddressFamily.AF_INET)
+
+    def has_ipv4_only(self):
+        """
+        Returns True if the host has only IPv4 address support.
+        """
+        return self.attempt_connection(socket.AddressFamily.AF_INET) and not self.attempt_connection(socket.AddressFamily.AF_INET6)
+
+    def attempt_connection(self, address_family):
+        """
+        Returns True if a successful socket connection can be made to the 
+        remote host with the provided address family to validate host support 
+        for the provided address family.
+        """
+        address = None
+        for a in self.get_addresses():
+            if a[0] == address_family:
+                address = a
+                break
+        if address is None:
+            # Couldn't even lookup the address family so we can't connect
+            return False
+        af, socktype, proto, canonname, sockaddr = address
+        s = None
+        try:
+            s = socket.socket(af, socktype, proto)
+        except OSError:
+            return False
+        try:
+            s.connect(sockaddr)
+        except OSError:
+            s.close()
+            return False
+        s.close()
+        return True

component-tests/test_service.py

@@ -1,7 +1,6 @@
 #!/usr/bin/env python
 import os
 import pathlib
-import platform
 import subprocess
 from contextlib import contextmanager
 from pathlib import Path
@@ -10,12 +9,7 @@ import pytest
 
 import test_logging
 from conftest import CfdModes
-from util import start_cloudflared, wait_tunnel_ready, write_config
+from util import select_platform, start_cloudflared, wait_tunnel_ready, write_config
-
-
-def select_platform(plat):
-    return pytest.mark.skipif(
-        platform.system() != plat, reason=f"Only runs on {plat}")
 
 
 def default_config_dir():

component-tests/util.py

@@ -1,9 +1,12 @@
 import logging
 import os
+import platform
 import subprocess
 from contextlib import contextmanager
 from time import sleep
 
+import pytest
+
 import requests
 import yaml
 from retrying import retry
@@ -12,6 +15,10 @@ from constants import METRICS_PORT, MAX_RETRIES, BACKOFF_SECS
 
 LOGGER = logging.getLogger(__name__)
 
+def select_platform(plat):
+    return pytest.mark.skipif(
+        platform.system() != plat, reason=f"Only runs on {plat}")
+
 
 def write_config(directory, config):
     config_path = directory / "config.yml"
@@ -111,6 +118,17 @@ def check_tunnel_not_connected():
         LOGGER.warning(f"Failed to connect to {url}, error: {e}")
 
 
+def get_tunnel_connector_id():
+    url = f'http://localhost:{METRICS_PORT}/ready'
+
+    try:
+        resp = requests.get(url, timeout=1)
+        return resp.json()["connectorId"]
+    # cloudflared might already terminated
+    except requests.exceptions.ConnectionError as e:
+        LOGGER.warning(f"Failed to connect to {url}, error: {e}")
+
+
 # In some cases we don't need to check response status, such as when sending batch requests to generate logs
 def send_requests(url, count, require_ok=True):
     errors = 0