According to the [sysfs class power ABI],
/sys/class/power_supply/<supply_name>/status may contain "Not charging".
This is already handled by status_gt() and update() (where ' ' is
converted to '-' for use in config keys) but was not being read due to
skipws. Read with std::getline() to handle this case.
[sysfs class power ABI]: https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-class-powerFixes: #1139
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Stop using private implementation details of the `formatter<std::tm>`.
We never needed anything from the class besides the format specifier,
which is easily obtainable with public API.
Ensure that sway workspaces are always displayed in the same order as
used internally by sway. The previous sorting code always sorted
unnumbered workspaces lexicographically. This isn't the order used by
sway internally. Therefore, commands such as "workspace next" might have
jumped arbitrarily in waybar.
This commit reworks the sorting code such that the internal order is
always obeyed. Additionally, numbered persistent workspaces are inserted
at their natural position at the front of the workspace list while
unnumbered ones are appended. This should match the expectations of
workspace ordering known from sway's behavior.
The changes make the configuration property "numeric-first" unnecessary
as this will always be the case now. There's also no reasonable way
around this behavior now. Otherwise, persistent workspaces would jump
around in the visual representation as soon as they become known to
sway.
Fixes#802
The logind feature adds a new inhibitor module which allows to acquire
the inhibitor locks that logind presents.
Signed-off-by: Alexis Cellier <kernelserror@gmail.com>
There is a double delete situation which causes a SIGSEGV to happen
during destruction of bar.
This was introduced by the group feature patch.
The same object pointer is stored in two different vectors of
unique_ptr<AModule> element. Replace with shared_ptr to handle
reference counting correctly and avoid double delete.
Introducing new tooltip placeholder: {timezoned_time_list}. It will be replaced with the list of times in different time zones.
I've found it useful to hover the mouse pointer on time and see time in all my timezones at once.
Current timezone excluding from the list, so if you will scroll over the time module and change the active timezone, this timezone will be excluded from the list and the previous active zone will be added.
Allow changing existing modes and adding new ones via `modes`
configuration key.
`modes` accepts a JSON object roughly described by the following type
```typescript
type BarMode = {
layer: 'bottom' | 'top' | 'overlay';
exclusive: bool;
passthrough: bool;
visible: bool;
};
type BarModeList = {
[name: string]: BarMode;
};
```
and will be merged with the default modes defined in `bar.cpp`.
Note that with absence of other ways to set mode, only those defined in
the `sway-bar(5)`[1] documentation could be used right now.
[1]: https://github.com/swaywm/sway/blob/master/sway/sway-bar.5.scd
If the primary output does not support changing volume MPD will report
-1. Ensure that negative volume levels will be represented as 0 instead.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
I was seeing "[warning] Requested height: 20 exceeds the minimum height: 30 required..."
Lines 114-134 are relevant; 133 overrides the requested height with the minimum height when GTK wants more pixels to work with. So, the code is behaving as expected, and "less than" matches the code's logic.
When natural scrolling is enabled, the behaviour of scrolling on pulseaudio
module is reversed, this commit reverses the direction of scroll variable
if "reverse-scrolling" is set to 1 in config file.
After this refactoring:
1. Timezones parses only once on start and the we refer to saved values. All time_zone.isString() checks gone to the constructor.
2. Single timezone case handling as case of multi timezoned logic.
3. Scroll event seems more clear now.
4. Tooltip template parses on start to check if there calendar placeholder or not. To do not calculate calendar_text() if not necessary.
Also fixed timezones behavior: now waybar starting with the first timezone in timezones list and falling back to timezone field only if timezones omit or has no elements.
`show_all` call from `Tray::update` attempts to walk the widget tree and
make every widget visible. Since we control individual tray item
visibility based on `Status` SNI property, we don't want that to happen.
Modify `Tray::update` to control the visibility of a whole tray module
only and ensure that the children of `Item` are still visible when
necessary.
This fixes issue #610 by reading bandwidth usage per-interface from
/proc/net/dev instead of globally via /proc/net/netstat. It supports the
same matching logic as elsewhere, so setting interface to '*' should
display the same sum-total bandwidth usage as the previous
implementation.
- Delete previous Layout before creating next one, and in destructor
- Use stack XKBContext instead of local new+delete
- Lock mutex in update() as it is called from a different thread than onEvent(res)
On the `Passive` value of `Status` tray items would be hidden unless
`show-passive-items` is set to true.
On the `NeedsAttention` value of `Status` tray items will have a
`.needs-attention` CSS class.
In a system with multiple sinks, the default sink may not always be
the once currently being used. It is more useful to control the
currently active sink rather than an unused one.
This patch does not make any difference if the system only uses the
default sink.
Signed-off-by: Roosembert Palacios <roosemberth@posteo.ch>
Whenever the network module is configured with both "format" and
"format-$state" and when the module use "format-$state" once, it
override the value that was saved from "format".
For example, if both "format" and "format-disconnect" are configured,
and only those, as soon as the module show information about a
disconnected interface, it will keep showing the format for
disconnected, even if the interface is connected again later.
Fix that by always setting a value to default_format_ in update() and
thus use the intended default format when needed.
Fixes#1129
When an interface's state is change to "down", all the route
associated with it are deleted without an RTM_DELROUTE event.
So when this happen, reset the module to start looking for a new
external interface / default route.
Fixes#1117
The check to figure out if we have the default route should be after
the for loop that parses the route attributes, to avoid acting on
incomplete information. We are going to use more fields from the
message.
The module doesn't update the `essid_` as soon as a WiFi interface is
connected, but that happens at some point later, depending on
"interval" configuration.
Fix that by rerunning the get WiFi information thread when the
`carrier` state changes. Also, we will clear the state related to WiFi
when the connection is drop to avoid stale information.
Some RTM_NEWLINK messages may not have the IFLA_CARRIER information.
This is the case when a WiFi interface report scan result are
available. `carrier` is used regardless of if it is present in the
message or not. This would result in the interface appearing
"disconnected" in waybar when it isn't.
This patch now check that `carrier` is available before using it.
The same thing could potentially happen to `ifname` so check if it's
set before recording it.
Fixes: c1427ff (network: Handle carrier information)
Fixes#388
IFLA_CARRIER allows to know when a cable is plugged to the Ethernet
card or when the WiFi is connected. If there's no carrier, the
interface will be considered disconnected.
Last part of the rework of handleEvents(), this time we take the
getExternalInterface() function and add it to the handleEvents()
function. That way, waybar can react immediately when a new "external
interface" is available and doesn't need to probe. Also that avoid to
have two different functions consuming from the same socket and we
don't need to recode some of the functions that are already available
via libnl (to send and receive messages).
In order to get the IP address of an interface, we can get the
information out of NEWADDR events without needed to call getifaddrs().
And when now events are expected, we can requests a dump of all
addresses and handle addresses changes the same way via handleEvents()
only.
Instead of using an alternative way to list all links in order to
choose one when an "interface" is in the configuration, we can ask for
a dump of all interface an reuse the handleEvents() function.
This patch also start to rework the handleEvents() function to grab
more information out of each event, like the interface name.
When more than one message is available to read on the ev_sock_
socket, only the first one is read.
Make some changes to be able to read all the messages available by
setting the socket to non-blocking. This way we can detect when
there's nothing left to read and loop back to wait with epoll.
Fix modules starting with no text, but not hidding.
Start with some "text" in the module's label_, update() will then
update it. Since the text should be different, update() will be able
to show or hide the event_box_. This is to work around the case where
the module start with no text, but the the event_box_ is shown.
`format-discharging-full` has been impossible since #923 made it
impossible to be full and discharging at the same time. This should
fix that by only making `format-charging-full` impossible. Whether
or not that should be allowed is a good question, but beyond the
scope of this change.
Fixes#1031
std::regex and std::regex_replace may throw an std::regex_error if the
expression or replacement contain errors.
Log this error and carry on with the next rule, so that the title is
shown even if the config contains errors.
Rewrites window title according to config option "rewrite".
"rewrite" is an object where keys are regular expressions and values are
rewrite rules if the expression matches. Rules may contain references to
captures of the expression. Regex and replacement follow ECMA-script
rules. If no regex matches, the title is left unchanged.
example:
"sway/window": {
"rewrite": {
"(.*) - Mozilla Firefox": " $1",
"(.*) - zsh": " $1",
}
}
Allow the user to show the current volume from MPD status via the
`format` and/or `tooltip-format` configuration options.
The values are provided by libmpdclient and are integers, generally
between 0-100 (without %). Values above 100 are also possible, as mpd
output plugins like `pulse` support volumes above 100%.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
On some systems (eg: ARM) the supported frequencies of the CPU are not
properly reported by /proc/cpuinfo so if that fails try to retrieve them
from /sys/devices/system/cpu/cpufreq/policy[0-9]/cpuinfo_[max|min]_freq.
Moving rfkill to the main event loop had unexpected side-effects.
Notably, the network module mutex can block all the main thread events
for several seconds while the network worker thread is sleeping.
Instead of waiting for the mutex let's hope that the worker thread
succeeds and schedule timer thread wakeup just in case.
Open rfkill device only once per module.
Remove rfkill threads and use `Glib::signal_io` as a more efficient way
to poll the rfkill device.
Handle runtime errors from rfkill and stop polling of the device instead
of crashing waybar.
Kernel 5.11 added one more field to the `struct rfkill_event` and broke
unnecessarily strict check in `rfkill.cpp`. According to `linux/rfkill.h`,
we must accept events at least as large as v1 event size and should be
prepared to get additional fields at the end of a v1 event structure.
Multiple .done events may arrive in batch. In this case libwayland would
queue xdg_output.destroy and dispatch all pending events, triggering
this callback several times for the same output.
Delete xdg_output pointer immediately on the first event and use the
value as a guard for reentering.
At this point we're not awaiting any protocol events and flushing
wayland queue makes little sense. As #1019 shows, it may be even harmful
as an extra roundtrip could process wl_output disappearance and delete
output object right from under our code.
Oto Šťáva
Felix Weilbach
Alex
Kevin Locke
nullobsi
Aleksei Bavshin
mazunki
Johannes Wienke
ilkecan
bd-g
Brent George
aashu
Alexis Cellier
John Fredriksson
Sergey Mishin
Patrick Nicolas
dmitry
Nicolas Joyard
kraftwerk28
Sefa Eyeoglu
Mohammad Amin Sameti
Marwin Glaser
jonbakke
Robin Ebert
Rene D. Obermueller
Elyes HAOUAS
WuerfelDev
Darkclainer
Gavin Beatty
Matan1x
Michael Swiger
Ciaran Downey
Tobias Bengfort
Isaac Freund
Grant Moyer
Lars Christensen
Roosembert Palacios
tiosgz
John Helmert III
Oskar Carl
Anthony PERARD
Maxim Baz
Amanieu d'Antras
Yonatan Avhar
Max1Truc
Patrick Hilhorst
Gabe Gorelick
David96
Matthias Richter
jgmdev
Petri Lehtinen
Antonin Reitz
Genesis
Andy Russell