Commit Graph

802 Commits

Author SHA1 Message Date
Brian Ashworth c97f0eb0f2 backend/headless: improve output number handling
This improves the way the output numbers are handled for the headless
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
HEADLESS-2, which causes an issue since the identifier will also be
identical. With this, the last output is HEADLESS-3 and the outputs can
be distinguished.
2019-03-15 18:37:56 +02:00
Brian Ashworth b135599e5a backend/x11: improve output number handling
This improves the way the output numbers are handled for the x11
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
X11-2, which causes an issue since the identifier will also be
identical. With this, the last output is X11-3 and the outputs can be
distinguished.
2019-03-15 18:37:35 +02:00
Brian Ashworth 67523fb228 backend/wayland: improve output number handling
This improves the way the output numbers are handled for the wayland
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
`WL-2`, which causes an issue since the identifier will also be
identical. With this, the last output is `WL-3` and the outputs can be
distinguished.
2019-03-15 09:43:40 +02:00
Niklas Schulze 2baad6eba6 backend/session: Allow setting a custom tty via WLR_DIRECT_TTY 2019-03-06 13:20:51 +01:00
Scott Anderson 6a8f17b5f6 backend/drm: Don't fail on failing to find overlay format
Some hardware exists which doesn't support XRGB/ARGB overlays, and we
aren't even using overlay planes, so don't fail on trying to find a
format.
2019-03-05 23:15:20 +01:00
emersion d02548d87a
backend/session: open TTY with O_CLOEXEC for direct session 2019-03-05 19:19:13 +01:00
emersion 8efeca528f backend/session: add noop session
This is the first step towards being able to run via DRM leasing and on render
nodes.

Test with:

    export WLR_BACKENDS=drm
    export WLR_SESSION=noop
    export WLR_DRM_DEVICES=/dev/dri/renderD128
2019-03-02 08:40:27 -07:00
emersion 5445d8aad0 meson: enable more compiler warnings 2019-03-01 09:20:23 +01:00
Scott Anderson d945c97926 backend/drm: Unset cursor on cleanup
This will prevent the cursor from persisting on the Linux framebuffer
terminal on exit.
2019-02-24 09:04:36 +01:00
Rouven Czerwinski e1834ace28 backend/drm: fix memory leak in realloc crtcs
If *changed_outputs is not supplied by the calling function, track the local
allocation with a bool variable and free the allocation at the end of the
function.
2019-02-21 08:19:12 +01:00
Brian Ashworth 50011e7170 backend/drm: fix modeset on drm fd resume
On DRM resume, such as switching back to a TTY, the output needs to be
modeset to the current mode. However, wlr_output_set_mode will return
early when attempting to set the mode to the current mode. This just
steps around wlr_output_set_mode and calls drm_connector_set_mode
directly.
2019-02-19 16:49:51 +01:00
emersion 2a738803b2
backend/drm: fix NULL dereference when unsetting cursor
This segfault happens on multi-GPU systems.

Fixes https://github.com/swaywm/sway/issues/3717
2019-02-18 20:15:39 +01:00
Drew DeVault 2d2c79e37c
Merge pull request #1537 from VincentVanlaer/cursor-dmabuf-nouveau
Add workaround for hardware cursors on nouveau
2019-02-15 16:07:50 +01:00
Vincent Vanlaer 26a9fa8148 Add workaround for hardware cursors on nouveau 2019-02-15 15:59:09 +01:00
Drew DeVault 9a5d59a839 Revert "drm: do not modeset to current mode"
This reverts commit 72c76b128e.
2019-02-15 09:44:42 -05:00
Vincent Vanlaer bc048b22fb Copy cursor surface to secondary gpu if necessary 2019-02-14 12:31:54 +01:00
Brian Ashworth 72c76b128e drm: do not modeset to current mode
There is no point in modesetting an output to a mode that it is already
set to. Modesetting will cause the output to briefly flicker which is
undesirable for a noop. This returns early in `drm_connector_set_mode`
when attempting to modeset to the current mode.
2019-02-14 10:59:06 +01:00
Scott Anderson b2f56ad4a8
Merge pull request #1526 from VincentVanlaer/cursor-dmabuf
Allow cursor render surface to be used as fb
2019-02-04 21:34:40 +00:00
Vincent Vanlaer 7bc43413ed Allow cursor render surface to be used as fb
In order for a surface to be used as a cursor plane framebuffer, it
appears that requiring the buffer to be linear is sufficient.

GBM_BO_USE_SCANOUT is added in case GBM_BO_USE_LINEAR isn't sufficient
on untested hardware.

Fixes #1323

Removed wlr_drm_plane.cursor_bo as it does not serve any purpose
anymore.

Relevant analysis (taken from the PR description):

While trying to implement a fix for #1323, I found that when exporting
the rendered surface into a DMA-BUF and reimporting it with
`GBM_BO_USE_CURSOR`, the resulting object does not appear to be valid.
After some digging (turning on drm-kms debugging and switching to legacy
mode), I managed to extract the following error: ```
[drm:__setplane_check.isra.1 [drm]] Invalid pixel format AR24
little-endian (0x34325241), modifier 0x100000000000001 ``` The format
itself refers to ARGB8888 which is the same format as
`renderer->gbm_format` used in master to create the cursor bo. However,
using `gbm_bo_create` with `GBM_BO_USE_CURSOR` results in a modifier of
0. A modifier of zero represents a linear buffer while the modifier of
the surface that is rendered to is  `I915_FORMAT_MOD_X_TILED` (see
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/drm/drm_fourcc.h?h=v4.20.6#n263).
In order to fix this mismatch in modifier, I added the
`GBM_BO_USE_LINEAR` to the render surface and everything started to work
just fine. I wondered however, whether the export and import is really
necessary. I then decided to test if the back buffer of the render
surface works as well, and at least on my hardware (Intel HD 530 and
Intel UHD 620) it does. This is the patch in this PR and this requires
no exporting and importing.

I have to note that I cheated in order to import DMA_BUFs into a cursor
bo when doing the first tests, since on import the Intel drivers check
that the cursor is 64x64. This is strange since cursor sizes other than
64x64 have been around for quite some time now
(https://lists.freedesktop.org/archives/mesa-commit/2014-June/050268.html).
Removing this check made everything work fine. I later (while writing
this PR) found out that `__DRI_IMAGE_USE_CURSOR` (to which
`GBM_BO_USE_CURSOR` translates) has been deprecated in mesa
(https://gitlab.freedesktop.org/mesa/mesa/blob/master/include/GL/internal/dri_interface.h#L1296),
which makes me wonder what the usecase of `GBM_BO_USE_CURSOR` is. The
reason we never encountered this is that when specifying
`GBM_BO_USE_WRITE`, a dumb buffer is created trough DRM and the usage
flag never reaches the Intel driver directly. The relevant code is in
https://gitlab.freedesktop.org/mesa/mesa/blob/master/src/gbm/backends/dri/gbm_dri.c#L1011-1089
. From this it seems that as long as the size, format and modifiers are
right, any surface can be used as a cursor.
2019-02-04 20:47:07 +01:00
mnussbaum c138da233b Allow compositors to run as systemd user units
When a wlroots compositor runs as a systemd user unit there is no
session associated with the compositor process. Instead we need to
attach to an active and graphical user session.

This change first looks for an available session for the process, and if
there isn't one falls back to display in the oldest available graphical
session.

This work was modeled after a similar change to mutter -
https://gitlab.gnome.org/GNOME/mutter/merge_requests/150.
2019-02-03 18:45:32 -08:00
emersion 22faddde9e
backend/session/logind: dup FD with CLOEXEC 2019-01-31 16:11:45 +01:00
emersion 75371d2c88
Require libdrm >= 2.4.95 2019-01-29 19:33:38 +01:00
Drew DeVault feb1b9b1cb
Merge pull request #1509 from emersion/gbm-fmt-mismatch
backend/drm: fix GBM format mismatch
2019-01-29 10:39:54 -05:00
emersion ee293fab58
backend/drm: fix GBM format mismatch
We create the EGL config with GBM_FORMAT_ARGB8888, but then initialize GBM BOs
with GBM_FORMAT_XRGB8888. This mismatch confuses Mesa.

Instead, we can always use GBM_FORMAT_ARGB8888, and use DRM_FORMAT_XRGB8888
when calling drmModeAddFB2.

Fixes https://github.com/swaywm/wlroots/issues/1438
2019-01-29 12:04:12 +01:00
Greg V 9fe8e37961 Implement the pointer-gestures-unstable-v1 protocol
This protocol relays touchpad gesture events produced by libinput to
supporting clients (e.g. Evince, Eye of GNOME).
2019-01-28 22:06:36 +01:00
emersion b45fc24b18
backend/wayland: handle wl_pointer.axis_stop 2019-01-26 11:18:47 +01:00
emersion 5de26ad8ed
pointer: add a frame event
Frame events group logically connected pointer events. It makes sense to make
the backend responsible for sending frame events, since once the events are
split (ie. once the frame events are stripped) it's not easy to figure out
which events belongs to which frame again.

This is also how Weston handles frame events.

Fixes https://github.com/swaywm/wlroots/issues/1468
2019-01-26 11:04:05 +01:00
Jente Hidskes 85d84a1a04
backend/x11 & backend/wayland: make set_title NULL-safe
Set the default "wlroots - " title when the title argument to the
set_title functions is NULL. Otherwise, for at least the Wayland
backend, we'd crash because xdg_toplevel_set_title doesn't handle a NULL
pointer.
2019-01-24 15:18:28 +01:00
Brian Ashworth 88ee102992 backend/wayland: fix resizing
Before resizing the egl window, the buffers must be swapped
2019-01-22 21:19:34 +01:00
Jente Hidskes edf0e49195
Add wlr_x11_output_set_title 2019-01-20 16:21:04 +01:00
emersion d4ffa5b7a6
backend/drm: fix state for outputs loosing their CRTC
When there aren't enough CRTCs for all outputs, we try to move a CRTC from a
disabled output to an enabled one. When this happens, the old output's state
wasn't changed, so the compositor thought it was still enabled and rendering.

This commit marks the old output as WLR_DRM_CONN_NEEDS_MODESET and sets its
current mode to NULL.
2019-01-19 10:18:03 +01:00
Ryan Dwyer 9b4be5a595 Introduce noop backend
The noop backend is similar to headless, but it doesn't contain a
renderer. It can be used as a place to stash views for when there's no
physical outputs connected.
2019-01-17 20:13:55 +10:00
Drew DeVault d3d1437bc4 Add wlr_wl_output_set_title 2019-01-10 21:53:32 -05:00
Drew DeVault 97af2464b7 Update Wayland backend to xdg-shell stable 2019-01-10 09:17:14 -05:00
Jan Beich f80d174e8b Simplify evdev includes on FreeBSD by relying on up-to-date package
As evdev-proto is installed by CI some files have been missed:

 ../examples/pointer-constraints.c:2:10: fatal error: 'linux/input-event-codes.h' file not found
 #include <linux/input-event-codes.h>
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
 ../examples/relative-pointer-unstable-v1.c:5:10: fatal error: 'linux/input-event-codes.h' file not found
 #include <linux/input-event-codes.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-01-07 08:08:47 +00:00
emersion 610f5bfc77
Merge pull request #1432 from ForTheReallys/relative-pointers
Relative pointers
2019-01-04 13:42:53 +01:00
emersion 9b1d9fb91e
backend/drm: get physical size from libdrm
Values from libdrm are likely more reliable than raw values from the EDID. We
were already using values from libdrm, but they were overwritten by parse_edid.
See drm.c:

    wlr_conn->output.phys_width = drm_conn->mmWidth;
    wlr_conn->output.phys_height = drm_conn->mmHeight;
2018-12-23 10:36:53 +01:00
Timidger 9af0c5338f
Standardize the wlr_box input paramaters
Fixes #1094
2018-12-21 13:56:10 -05:00
Alex Maese e276d310e8 Add unaccelerated pointer values to wlr_event_pointer_motion events 2018-12-21 12:20:48 -06:00
emersion ff6c4f80b2
backend/drm: don't insert duplicate custom modes, fix refresh rate 2018-12-16 11:06:46 +01:00
Ryan Walklin 2a3c62b4d2 [WIP][DONTMERGE]Add support for libinput_switch input devices
These are used primarily by laptops to signal
the state of the lid (open/closed) and tablet
mode if supported, based on ACPI events.
2018-12-15 14:42:35 +11:00
Scott Anderson fec88770dd backend/drm: Fix uninitialized variable 2018-12-09 22:55:53 +13:00
Scott Anderson efdd4d6ea2 backend/drm: Improve encoder logic
This fixes an issue that can occur with DP MST connectors not reporting
any encoders.
2018-12-09 22:48:00 +13:00
emersion f8056a0350
backend/drm: fix disappeared output indices
This commit changes `scan_drm_connectors` to add new outputs to the end of the
list. That way, it's easier to understand what's going on with indices.

When we need to destroy outputs, we now walk the list in reverse order. This
ensures indices remain correct while iterating and removing items from the
list.

We now also make outputs without a CRTC disappear (those are in
WLR_DRM_CONN_NEEDS_MODESET state).
2018-12-09 10:12:52 +01:00
Drew DeVault 20f5fc9e2e
Merge pull request #1413 from emersion/logind-session-logs
backend/session/logind: improve logging
2018-12-06 18:03:33 -05:00
emersion e23fe328a6
backend/session/logind: improve logging 2018-12-06 17:01:17 +01:00
emersion 491f1dbf75
backend/drm: fix VLA overflow 2018-12-04 18:56:29 +01:00
emersion 408e2a77e9
backend/wayland: fix zero-length VLA 2018-11-27 23:18:12 +01:00
Rostislav Pehlivanov 91513c89cd Fix interlaced mode rejection 2018-11-22 17:52:52 +00:00
Rostislav Pehlivanov dc9fdd6385 Skip interlaced modes during drm mode detection
Fixes #3167
A better solution could be made if there's a need to.
2018-11-21 19:23:48 +00:00
Scott Anderson d3ee69f76b backend/x11: Hide cursor with Xfixes 2018-11-13 10:55:03 +13:00
Scott Anderson 70ae76304e backend/x11: Remove old input functions
This also allows us to remove xcb-xkb, since Xinput will now give us the
appropriate XKB modifiers with each event.
2018-11-13 10:55:03 +13:00
Scott Anderson d89e868cc9 backend/x11: Add new Xinput events 2018-11-13 10:42:02 +13:00
Scott Anderson 88b2d6fe25 backend/x11: Check for xinput extension 2018-11-13 10:41:37 +13:00
Scott Anderson 9c1b87f210 backend/x11: Move atom initilisation earlier
There isn't any real reason to delay this until the backend is started.
2018-11-13 10:40:52 +13:00
Scott Anderson ab2c57984b backend/x11: Make header order consistent 2018-11-13 10:40:52 +13:00
Scott Anderson 51a283cbe4 backend/x11: Rename xcb_conn to xcb
When the Xlib connection is removed, this _conn suffix is going to be
pointless. I'm removing this preemtively for that.
2018-11-13 10:39:24 +13:00
Drew DeVault 77dfac4fa4
Merge pull request #1372 from emersion/config10
Use #if instead of #ifdef for wlroots config data
2018-11-12 16:14:18 -05:00
emersion 51bfdd620e
Use #if instead of #ifdef for wlroots config data
This prevents some annoying issues when e.g. not including wlr/config.h or
making a typo in the guard name.
2018-11-12 10:12:46 +01:00
emersion 180151ed09
backend/wayland: handle WL_EVENT_WRITABLE for Wayland socket
We need to flush when the connection is writable again. This is important in
case the write buffer becomes full. This is also what Weston does [1].

[1]: https://gitlab.freedesktop.org/wayland/weston/blob/master/libweston/compositor-wayland.c#L2593
2018-11-11 21:14:15 +01:00
Scott Anderson aaff4b8c00 backend/wayland: Make header order consistent 2018-11-11 22:29:35 +13:00
Scott Anderson bbce92a923 backend/wayland: Move initilisation code earlier
The renderer redesign is going to need the render fd before the backend
is fully started, so we have to move the wl registry code to when the
backend is created instead of when it is started.

We also need to stash the wl_keyboard and emit it to library users
later, once they've added their listeners and started the backend.
2018-11-11 18:11:56 +13:00
Scott Anderson 47545cf550 backend/wayland: Use specific wl_global versions
Explicitly use the version we support instead of accepting the
compositor's version.
2018-11-11 18:11:56 +13:00
Scott Anderson 4e03802057 backend/wayland: Move registry into backend
Registry was a very small file, and is heavily related to the backend,
so there is not point in keeping them separate.
2018-11-11 18:11:56 +13:00
emersion 09550032b7
render: correctly set EGL_RENDERABLE_TYPE
This should be set to EGL_OPENGL_ES2_BIT.

Also fixes EGL config attributes in the headless and X11 backends.
2018-11-10 13:20:54 +01:00
emersion b5125ff328
backend/drm: specify minimum config attributes
Since the format used by DRM is GBM_FORMAT_ARGB8888, we need at least a R, G, B
and A channel.
2018-11-04 09:00:55 +01:00
Drew DeVault 70ca7daeb2
Merge pull request #1346 from emersion/fix-schedule-frame-mgpu
backend/drm: fix frame scheduling on secondary GPUs
2018-10-30 01:59:25 +01:00
emersion 68362b37a8
backend/drm: fix frame scheduling on secondary GPUs
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.

Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.

In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
2018-10-29 20:38:57 +01:00
emersion 443a38bd3f
backend/drm: add WLR_DRM_NO_ATOMIC_GAMMA env variable
This allows the legacy interface to be used instead of atomic if needed. This
is a workaround to make some Intel GPUs work (if this variable is unset) as
well as to make some AMD GPUs work (if this variable is set).
2018-10-28 23:43:21 +01:00
Drew DeVault e0cf97da69
Merge pull request #1307 from emersion/static-analysis
Fix a few bugs found by the static analyzer
2018-10-21 19:18:39 +02:00
sghctoma fa587b8ea9 Increase _POSIX_C_SOURCE to 200112L
CLOCK_MONOTONIC appeared in IEEE Std. 1003.1-200x, it was not part of
POSIX.1b (the 1993 version), and FreeBSD treats it accordingly.
2018-10-17 08:33:19 +02:00
emersion f9eb5df80e backend: fix use-after-free in wlr_backend_autocreate
Found by clang static analyzer.
2018-10-13 10:58:59 +02:00
emersion b66041a9e5 backend/drm: don't reset conn->pageflip_pending in drm_connector_cleanup
If a pageflip is pending before cleanup, it's still pending after. This
is used line 1177: drm_connector_cleanup is called and
conn->pageflip_pending is checked afterwards.

Fixes #1297
2018-10-09 14:54:33 +02:00
Drew DeVault 8488ed2997
Merge pull request #1298 from emersion/output-dangling-idle-frame
output: remove idle_frame event source when destroying output
2018-10-09 13:41:04 +02:00
Rouven Czerwinski 77478ac302 backend/drm: set drmEventContext version to 2
As per [1] set drmEventContext version to 2, since wlroots does not use the
page_flip_handler2.

[1]: https://s-opensource.org/2017/04/12/libdrm-event-handling-youre-probably-wrong/
2018-10-09 12:34:01 +02:00
emersion 46b1ba386f output: remove idle_frame event source when destroying output
This prevents the idle event to be activated on a destroyed
output.

This also makes the backend responsible for free-ing modes, as it
is the one allocating them and adding them to the list. Note that
the DRM backend (the only one using modes) already frees them.
2018-10-09 10:55:03 +02:00
Scott Anderson 885586a831
Merge pull request #1280 from emersion/drm-link-status
backend/drm: add support for the link-status property
2018-10-08 21:01:30 +02:00
emersion 37de179013 backend/drm: fix zero-length VLAs 2018-10-07 13:04:52 +02:00
emersion 776008da69 backend/drm: properly handle GPUs without CRTCs 2018-10-07 12:59:00 +02:00
emersion ba91422747 output: don't trigger a frame immediately in schedule_frame
This desynchronizes our rendering loop with the vblank cycle.

In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.

Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.

Fixes #617
Fixes swaywm/sway#2748
2018-10-05 16:18:37 +02:00
emersion eac7c2ad2f output: add presentation refresh prediction 2018-10-04 22:00:24 +02:00
emersion b0635bf3e7 Rename get_present_clock to get_presentation clock, use it 2018-10-04 22:00:22 +02:00
emersion 54e1287f30 backend: add get_present_clock 2018-10-04 21:58:17 +02:00
emersion 26b9d6dbb1 output: send present event from all backends 2018-10-04 21:56:38 +02:00
emersion 78389fe722 output: add present event 2018-10-04 21:56:38 +02:00
emersion f5a147b739 backend/drm: add support for the link-status property 2018-10-04 21:54:27 +02:00
Drew DeVault 841d04db99
Merge pull request #1262 from nyorain/session_fix
Improve session handling
2018-10-04 17:36:39 +02:00
nyorain b4d46aa9c2 Use sd_bus_get_property_trivial & remove numbering 2018-10-04 14:04:06 +02:00
emersion 7ab37bf152 backend/drm: update EDID manufacturers database 2018-10-04 10:58:45 +02:00
emersion e88db9a3fb backend/drm: reset gamma table on VT switch 2018-10-03 10:53:35 +02:00
emersion 2beb68007e output: make gamma size a size_t and gamma table const 2018-10-03 10:36:33 +02:00
emersion 79dd9ba151 backend/drm: don't free connector immediately
When a pageflip is pending, we'll get a DRM event for the connector
in the future. We don't want to free the connector immediately
otherwise we'll use-after-free in the pageflip handler.

This commit adds a new state, "DISAPPEARED". This asks the pageflip
handler to destroy the output after it's done pageflipping.
2018-09-28 10:00:40 +02:00
nyorain 7b52388424 Rework session handling
Sessions can now be retrieved from a backend in a more general manner.
Multi-backend gets back its `session` field that contains the session
if one was created, removing the interfacing from multi backend with the
drm backend directly. This adds the possibility to use sessions even
without the drm backend.

It additionally fixes the bug that 2 session objects got created when
WLR_BACKENDS were set to "libinput,drm".

To allow vt switching without drm backend (and drm fd) on logind, start
listening to PropertiesChanged signals from dbus and parse the session
"Active" property when no master fd was created (this does not change
current drm backend behaviour in any way).
2018-09-24 23:35:09 +02:00
sghctoma 9383e1f76c Apply multiseat fixes to FreeBSD direct backend
This commit applies the multiseat fixes that are part of PR #1063 (
commits 964e0a50 and 47895d2) to the FreeBSD direct backend.
2018-09-21 15:02:32 +02:00
Ryan Dwyer 691a63d66b Introduce wlr_multi_for_each_backend 2018-09-19 21:53:51 +10:00
emersion 139a905924 backend/drm: add assertions 2018-09-18 11:06:01 +02:00
emersion 02231554c8 backend/x11: add assertions 2018-09-18 11:06:01 +02:00
emersion e98cb7c5ab backend/wayland: add assertions 2018-09-18 11:06:01 +02:00
emersion 07ea98dab9 backend/session: add assertions 2018-09-18 11:06:01 +02:00
emersion 6c05f17a25 backend/multi: add assertions 2018-09-18 11:06:01 +02:00