Commit Graph

55 Commits

Author SHA1 Message Date
Simon Ser 8f90d7f8f5 backend/drm: take wlr_output_state as arg in crtc_commit
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
2021-04-29 19:51:57 +02:00
Simon Ser 7efc2d05b7 backend/drm: downgrade test-only commit failure log level
Let's not clutter the logs with error messages when a test-only
atomic commit fails.
2021-04-06 20:35:15 +02:00
Simon Ser 5088e25eaf backend/drm: don't set NONBLOCK with TEST_ONLY
The kernel ignores NONBLOCK when TEST_ONLY is set. Let's just not
set it, to make it clear it's unused.
2021-04-06 20:35:15 +02:00
Simon Ser c94728b53a
backend/drm: stop using surface size for BO
Stop using wlr_drm_surface.{width,height} to figure out the size of a
gbm_bo. In the future we'll stop using wlr_drm_plane.surf, so these will
be zero. Instead, rely on gbm_bo_get_{width,height}.
2021-01-10 11:24:44 +01:00
Simon Ser 5b1b43c68c backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointers
This will be useful once we start re-using wlr_drm_fb.
2021-01-10 11:24:35 +01:00
Simon Ser 17dd4c9e9a
backend/drm: use connector log helpers in atomic backend 2020-12-24 17:55:45 +01:00
Simon Ser d3bcd63a40 backend/drm: remove drm_fb_acquire
Instead, import the buffer into GBM and KMS in drm_fb_import. Also move
the multi-GPU copy there if necessary.
2020-12-22 15:53:10 +01:00
Simon Ser 5ee8b12dc3 backend/drm: make drm_fb_acquire return a FB ID 2020-12-22 15:53:10 +01:00
Simon Ser 019ffe8a5b backend/drm: introduce wlr_drm_connector.name
The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.

A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.

We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
2020-12-18 10:48:44 +01:00
Simon Ser da2a216934
backend/drm: add wlr_drm_connector.backend
This allows the DRM code to have direct access to the wlr_drm_backend
without having to go through an upcast via get_drm_backend_from_backend.
2020-12-15 22:56:14 +01:00
Simon Ser 70f3a0bb27 backend/drm: make adaptive_sync atomic
Stop using drmModeObjectSetProperty, set the property in the crtc_commit
function instead.
2020-06-01 11:45:11 -06:00
Simon Ser e7a8ea84c3 backend/drm: don't set cursor if off-screen
Closes: https://github.com/swaywm/wlroots/issues/2216
2020-05-27 21:01:20 +02:00
Simon Ser 15d8f1806e backend/drm: introduce pending and current CRTC state
Previously, we only had the pending state (crtc->pending, crtc->mode and
crtc->active). This causes issues when a commit fails: the pending state
is left as-is, and the next commit may read stale data from it.

This will also cause issues when implementing test-only commits: we need
to rollback the pending CRTC state after a test-only commit.

Introduce separate pending and current CRTC states. Properly update the
current state after a commit.
2020-05-26 23:34:37 +02:00
Simon Ser 47e5212823 backend/drm: rollback atomic blobs
If the atomic commit fails or is test-only, rollback
wlr_drm_crtc.{mode_id,gamma_lut} blob IDs to their previous value. This
prevents the next commits from failing or applying test-only state.
2020-05-26 20:01:38 +02:00
Simon Ser 2988ebb6f3 backend/drm: fix atomic commits when the GAMMA_LUT prop is missing
We already have the logic to fallback to the legacy interface above. We
just need to avoid calling atomic_add with a zero prop ID.

Closes: https://github.com/swaywm/wlroots/issues/2187
2020-05-14 23:55:43 +00:00
Simon Ser 347bdb6d9a output: make wlr_output_set_gamma atomic
wlr_output_set_gamma is now double-buffered and applies the gamma LUT on
the next output commit.
2020-05-14 20:09:28 +02:00
Simon Ser 51bbf31742 backend/drm: print error in set_plane_props
This makes it easier to understand which plane failed.
2020-05-12 15:12:22 +02:00
Simon Ser 2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser 06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00
Simon Ser f8e02db4bc backend/drm: remove conn_enable from interface
Use crtc_commit instead.
2020-05-09 16:42:25 +02:00
Simon Ser c608fc89d8 backend/drm: rename crtc_pageflip to crtc_commit
Also add a flags argument.

The commit function will also be used for disabling the CRTC.
2020-05-09 16:42:25 +02:00
Simon Ser 70883fd10b backend/drm: apply gamma LUT on page-flip 2020-05-09 16:42:25 +02:00
Simon Ser 69b2279092 backend/drm: remove mode argument to crtc_pageflip
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending
output changes. More fields will be added in the future (e.g. active,
gamma).
2020-05-09 16:42:25 +02:00
Simon Ser c9d6b18eef backend/drm: remove wlr_drm_interface.crtc_move_cursor
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-09 16:42:25 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson be90062c51 backend/drm: don't have fallback atomic commits
This is just doing atomic incorrectly.
2020-04-28 09:54:52 +02:00
Scott Anderson 8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Simon Ser 16e5e9541b Add -Wmissing-prototypes
This requires functions without a prototype definition to be static.
This allows to detect dead code, export less symbols and put shared
functions in headers.
2019-11-20 02:05:03 +00:00
Rouven Czerwinski d10072e76c backend: drm: switch to pageflip_handler_2
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.

Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.

Fixes #1297
2019-06-27 00:17:27 +00:00
Scott Anderson b85f0cbff9 Remove WLR_DRM_NO_ATOMIC_GAMMA workaround
This is fixed on amdgpu, so we don't need this anymore.
2019-06-11 08:52:34 +03:00
Simon Ser e8057bb60c backend/drm: fallback to drmModeAddFB2 2019-06-07 09:06:11 -04:00
emersion ee293fab58
backend/drm: fix GBM format mismatch
We create the EGL config with GBM_FORMAT_ARGB8888, but then initialize GBM BOs
with GBM_FORMAT_XRGB8888. This mismatch confuses Mesa.

Instead, we can always use GBM_FORMAT_ARGB8888, and use DRM_FORMAT_XRGB8888
when calling drmModeAddFB2.

Fixes https://github.com/swaywm/wlroots/issues/1438
2019-01-29 12:04:12 +01:00
emersion 443a38bd3f
backend/drm: add WLR_DRM_NO_ATOMIC_GAMMA env variable
This allows the legacy interface to be used instead of atomic if needed. This
is a workaround to make some Intel GPUs work (if this variable is unset) as
well as to make some AMD GPUs work (if this variable is set).
2018-10-28 23:43:21 +01:00
emersion f5a147b739 backend/drm: add support for the link-status property 2018-10-04 21:54:27 +02:00
emersion 2beb68007e output: make gamma size a size_t and gamma table const 2018-10-03 10:36:33 +02:00
emersion f8a50e4fe7 backend/drm: steal CRTCs from disabled outputs
This commit allows outputs that need a CRTC to steal it from
user-disabled outputs. Note that in the case there are enough
CRTCs, disabled outputs don't loose it (so there's no modeset
and plane initialization needed after DPMS). CRTC allocation
still prefers to keep the old configuration, even if that means
allocating an extra CRTC to a disabled output.

CRTC reallocation now happen when enabling/disabling an output as
well as when trying to modeset. When enabling an output without a
CRTC, we realloc to try to steal a CRTC from a disabled output
(that doesn't really need the CRTC). When disabling an output, we
try to give our CRTC to an output that needs one. Modesetting is
similar to enabling.

A new DRM connector field has been added: `desired_enabled`.
Outputs without CRTCs get automatically disabled. This field keeps
track of the state desired by the user, allowing to automatically
re-enable outputs when a CRTC becomes free.

This required some changes to the allocation algorithm. Previously,
the algorithm tried to keep the previous configuration even if a
new configuration with a better score was possible (it only changed
configuration when the old one didn't work anymore). This is now
changed and the old configuration (still preferred) is only
retained without considering new possibilities when it's perfect
(all outputs have CRTCs).

User-disabled outputs now have `possible_crtcs` set to 0, meaning
they can only retain a previous CRTC (not acquire a new one). The
allocation algorithm has been updated to do not bump the score
when assigning a CRTC to a disabled output.
2018-09-15 08:37:33 +02:00
Drew DeVault 633663cdde Use legacy modesetting for gamma control
It doesn't look like there's any motion on a fix from the AMDGPU side,
and using the legacy interface for this isn't so bad.
2018-08-29 23:05:38 +02:00
emersion a149c2370a Implement wlr-gamma-control-unstable-v1 2018-08-02 23:33:04 +01:00
emersion 7cbef15206
util: add wlr_ prefix to log symbols 2018-07-09 22:49:54 +01:00
Dominique Martinet f0d455f088 drm backend: overflow fixes
These operations are done in 32-bit arithmetics before being casted to 64-bit,
thus can overflow before the cast.
Casting early fixes the issue.

Found through static analysis
2018-06-30 11:21:22 +09:00
emersion 71ca45e2c0
Make sure we don't use others' prefixes 2018-04-25 23:24:58 +01:00
emersion b0d99f5c67
Remove wlr_ prefix from local symbols 2018-04-25 23:00:46 +01:00
emersion c2e1474010
Reformat all #include directives 2018-02-12 21:29:23 +01:00
Vincent Vanlaer 7cb828ac70 Fallback gamma on legacy if properties don't exist 2018-02-10 10:24:49 +01:00
Vincent Vanlaer dd69d7b764 Use VLA instead of heap alloc 2018-02-09 19:37:01 +01:00
Vincent Vanlaer 0232269a2d Fix style 2018-02-09 19:35:44 +01:00
Vincent Vanlaer b2f6941617 Free gamma when property blob creation fails 2018-02-09 18:54:56 +01:00
Vincent Vanlaer ab011406ad Add atomic gamma lut size fetching
Legacy gamma lut size now uses the new legacy_crtc member of
wlr_drm_crtc. This was Previously doen using old_crtc in
wlr_drm_connector, but since this refers to the crtc that was connected to
the ouput, this could give the wrong result.
2018-02-09 17:29:14 +01:00
Vincent Vanlaer cc1229e75e Add atomic gamma setting 2018-02-09 17:29:04 +01:00