Commit Graph

409 Commits

Author SHA1 Message Date
Simon Zeni a143093339 backend/headless: don't store the parent renderer 2021-11-18 09:37:57 -05:00
Simon Zeni 6dc6af1534 backend: remove backend_get_allocator 2021-11-18 09:37:57 -05:00
Simon Ser e13f3f8608 backend/drm: handle per-connector hotplug events
When a connector ID is specified in a hotplug event, don't scan all
connectors. Only scan the connector that has changed.
2021-11-02 13:36:43 +01:00
Ronan Pigott 8e225261f0 backend/wayland: use xdga client activation 2021-10-31 10:33:14 +01:00
Simon Ser 0817c52a21 backend/drm: get rid of BO handle table
The BO handle table exists to avoid double-closing a BO handle,
which aren't reference-counted by the kernel. But if we can
guarantee that there is only ever a single ref for each BO handle,
then we don't need the BO handle table anymore.

This is possible if we create the handle right before the ADDFB2
IOCTL, and close the handle right after. The handles are very
short-lived and we don't need to track their lifetime.

Because of multi-planar FBs, we need to be a bit careful: some
FB planes might share the same handle. But with a small check, it's
easy to avoid double-closing the same handle (which wouldn't be a
big deal anyways).

There's one gotcha though: drmModeSetCursor2 takes a BO handle as
input. Saving the handles until drmModeSetCursor2 time would require
us to track BO handle lifetimes, so we wouldn't be able to get rid
of the BO handle table. As a workaround, use drmModeGetFB to turn the
FB ID back to a BO handle, call drmModeSetCursor2 and then immediately
close the BO handle. The overhead should be minimal since these IOCTLs
are pretty cheap.

Closes: https://github.com/swaywm/wlroots/issues/3164
2021-10-29 11:38:37 +02:00
José Expósito 62e62b6942 backend/wayland: send hold gesture events
Receive hold gesture events using a Wayland listiner and emit the
appropiate wlr_pointer signal.
2021-09-27 15:30:31 +02:00
José Expósito 52d2491931 backend/libinput: send hold gesture events
Receive hold gesture events from libinput and emit the appropiate
wlr_pointer signal.
2021-09-27 15:30:31 +02:00
Simon Ser 2e12de96ca backend/drm: add support for panel orientation
Expose the panel orientation with wlr_drm_connector_get_panel_orientation.
Leave it to the compositor to consume this information and configure the
output accordingly.

Closes: https://github.com/swaywm/wlroots/issues/1581
2021-09-21 11:40:37 -06:00
Simon Zeni e5a949a955 backend/drm: implement drm lease function 2021-09-08 11:09:07 +02:00
Simon Ser 42dba9dc90 backend/drm: drop wlr_drm_connector.desired_mode
Previously used by attempt_enable_needs_modeset, but this has been
dropped in the previous commit.
2021-09-07 22:33:40 +02:00
Simon Ser 3c74bd0c91 backend/drm: introduce wlr_drm_connector_state
Previously, we were copying wlr_output_state on the stack and
patching it up to be guaranteed to have a proper drmModeModeInfo
stored in it (and not a custom mode). Also, we had a bunch of
helpers deriving DRM-specific information from the generic
wlr_output_state.

Copying the wlr_output_state worked fine so far, but with output
layers we'll be getting a wl_list in there. An empty wl_list stores
two pointers to itself, copying it on the stack blindly results in
infinite loops in wl_list_for_each.

To fix this, rework our DRM backend to stop copying wlr_output_state,
instead add a new struct wlr_drm_connector_state which holds both
the wlr_output_state and additional DRM-specific information.
2021-09-07 11:18:18 +02:00
Simon Ser 3fbf6e02a3 backend/drm: rename enum wlr_drm_connector_state to status
"state" is easily confused with wlr_output_state.
2021-09-07 11:18:18 +02:00
Simon Ser 5dfaf5ea9c backend/drm: introduce wlr_drm_bo_handle_table
Using GBM to import DRM dumb buffers tends to not work well. By
using GBM we're calling some driver-specific functions in Mesa.
These functions check whether Mesa can work with the buffer.
Sometimes Mesa has requirements which differ from DRM dumb buffers
and the GBM import will fail (e.g. on amdgpu).

Instead, drop GBM and use drmPrimeFDToHandle directly. But there's
a twist: BO handles are not ref'counted by the kernel and need to
be ref'counted in user-space [1]. libdrm usually performs this
bookkeeping and is used under-the-hood by Mesa.

We can't re-use libdrm for this task without using driver-specific
APIs. So let's just re-implement the ref'counting logic in wlroots.
The wlroots implementation is inspired from amdgpu's in libdrm [2].

Closes: https://github.com/swaywm/wlroots/issues/2916

[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[2]: 1a4c0ec9ae/amdgpu/handle_table.c
2021-08-25 10:05:37 -04:00
Simon Ser 46c42e55c6 backend/drm: add support for FB_DAMAGE_CLIPS
This allows the kernel to access our buffer damage. Some drivers
can take advantage of this, e.g. for PSR2 panels (Panel Self
Refresh) or for transfer over USB.

Closes: https://github.com/swaywm/wlroots/issues/1267
2021-08-18 20:59:25 +02:00
Simon Ser 7544b7abf9 backend/drm: use addon for wlr_drm_fb 2021-08-17 11:08:45 +02:00
Simon Ser c55f70c8b7 backend/drm: stop initializing renderer for parent backend
Unless we're dealing with a multi-GPU setup and the backend being
initialized is secondary, we don't need a renderer nor an allocator.
Stop initializing these.
2021-07-28 22:52:35 +02:00
Simon Ser 9b99570869 backend/drm: drop drm_surface_{make,unset}_current 2021-07-28 22:52:35 +02:00
Simon Ser f5900c1f00 backend/drm: remove primary swapchain
We can't nuke it completely, we still need it for multi-GPU.
2021-07-28 22:52:35 +02:00
Simon Ser cc8bc0db20 backend/drm: stop restoring CRTCs on exit
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.

The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.

KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).

Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.

[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-07-20 15:33:26 +02:00
Simon Ser aec062d0d3 backend/headless: remove wlr_output_impl.export_dmabuf
This is now provided by the generic wlr_output implementation.
2021-07-12 13:29:03 -04:00
Simon Ser f67cfb2ce2 backend/drm: remove backend arg from wlr_drm_interface.crtc_commit
The callee can just get it from the wlr_drm_connector.
2021-07-09 15:31:19 -04:00
Simon Ser 017555651b backend/drm: add test_only arg to wlr_drm_interface.crtc_commit
Right now callers of drm_crtc_commit need to check whether the
interface is legacy or atomic before passing the TEST_ONLY flag.
Additionally, the fallbacks for legacy are in-place in the common
code.

Add a test_only arg to the crtc_commit hook. This way, there's no
risk to pass atomic-only flags to the legacy function (add an assert
to ensure this) and all of the legacy-specific logic can be put back
into legacy.c (done in next commit).
2021-07-09 15:31:19 -04:00
Simon Ser 2d36d7fb67 backend/libinput: send touch frame events 2021-07-08 09:12:17 +02:00
Simon Zeni e192d87731 move wlr_box from /types to /util 2021-07-06 21:43:17 +02:00
Simon Ser e6cb11d882 backend/libinput: stop using wlr_list internally 2021-07-01 10:35:39 -04:00
Simon Ser 543f5b35d0 backend/wayland: remove swapchain
Rely on wlr_output's generic swapchain handling.
2021-06-07 15:42:38 +02:00
Simon Ser a670ee7940 backend/x11: remove swapchain
Rely on wlr_output's generic swapchain handling.

We still need a renderer for cursor readback, sadly.
2021-06-07 15:42:38 +02:00
Simon Ser 68c4f15958 backend/x11: implement get_dmabuf_primary_formats 2021-06-07 15:42:38 +02:00
Simon Ser 44feb832f9 backend/headless: remove swapchain
Rely on wlr_output's generic swapchain support instead of creating our
own. The headless output now simply keeps a reference to the front buffer
and does nothing else.
2021-06-07 15:42:38 +02:00
Simon Ser b86a0c8d8f backend/drm: move cursor fields to wlr_drm_connector
Doesn't make a lot of sense to split the cursor fields between
wlr_drm_plane and wlr_drm_connector. Let's just move everything to
wlr_drm_connector.
2021-06-02 11:08:52 +02:00
Simon Ser 2b0a1aeed5 output: take a wlr_buffer in set_cursor
Instead of passing a wlr_texture to the backend, directly pass a
wlr_buffer. Use get_cursor_size and get_cursor_formats to create
a wlr_buffer that can be used as a cursor.

We don't want to pass a wlr_texture because we want to remove as
many rendering bits from the backend as possible.
2021-06-02 11:08:52 +02:00
Simon Ser e06ea4e84a backend/drm: remove format arg from drm_plane_init_surface
This was always set to ARGB8888.
2021-06-02 11:08:52 +02:00
Simon Ser 9e9be83a58 backend/drm: implement get_cursor_formats and get_cursor_size 2021-06-02 11:08:52 +02:00
Simon Ser fd2b1f018e backend/x11: use common renderer and allocator
Instead of managing our own renderer and allocator, let the common
code do it.
2021-05-21 22:13:54 +02:00
Simon Ser c82f37542d backend/headless: use common renderer and allocator
Instead of managing our own renderer and allocator, let the common
code do it.

Because wlr_headless_backend_create_with_renderer needs to re-use
the parent renderer, we have to hand-roll some of the renderer
initialization.
2021-05-21 22:13:54 +02:00
Simon Ser 349553d011 backend/wayland: use common renderer and allocator
Instead of managing our own renderer and allocator, let the common
code do it.
2021-05-21 22:13:54 +02:00
Simon Ser 4dae12890f backend: automatically create allocator
Introduce a new backend_get_allocator function that automatically
creates an allocator for the backend if the backend has a renderer.
2021-05-21 22:13:54 +02:00
Simon Ser a1e8a639b3 backend/drm: introduce drm_connector_commit_state
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
2021-04-29 19:51:57 +02:00
Simon Ser 218955ce95 backend/drm: remove mode arg from drm_connector_set_mode
All of the information is in wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 31082a0554 backend/drm: remove wlr_drm_crtc_state.mode
Replace it with drm_connector_state_mode, which computes the mode
from the wlr_output_state to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser dfea0ff31d backend/drm: remove wlr_drm_crtc_state.active
Replace it with drm_connector_state_active, which figures out
whether the connector is active depending on the wlr_output_state
to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser 485ecc11a6 backend/drm: remove wlr_drm_crtc.pending_modeset
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser 1a9701cd7c backend/drm: take wlr_output_state as arg in commit callers
Instead of relying on wlr_output.pending to be empty when performing
backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 8f90d7f8f5 backend/drm: take wlr_output_state as arg in crtc_commit
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
2021-04-29 19:51:57 +02:00
Simon Zeni 144189674e backend: introduce backend_get_buffer_caps 2021-04-28 20:55:57 +02:00
Simon Zeni c75aa71816 render/gbm_allocator: make wlr_gbm_allocator_create return a wlr_allocator 2021-04-28 20:55:57 +02:00
Simon Ser 9b0e0970f9 backend/drm: destroy backend on udev remove event
Any use of the DRM FD after the remove event results in a "Permission
denied" error.
2021-04-27 09:11:44 +02:00
Simon Ser c49ea9ef4f backend/drm: destroy when parent is destroyed 2021-04-27 09:11:44 +02:00
Tadeo Kondrak 014c59aa40 backend/x11: add support for shm buffers 2021-04-20 20:27:25 +02:00
Simon Ser 80865351bd backend/wayland: add support for wl_shm buffers 2021-04-17 09:54:39 +02:00