The current supervisor serves the quic connection by performing all of the following in one method:
1. Dial QUIC edge connection
2. Initialize datagram muxer for UDP sessions and ICMP
3. Wrap all together in a single struct to serve the process loops
In an effort to better support modularity, each of these steps were broken out into their own separate methods that the supervisor will compose together to create the TunnelConnection and run its `Serve` method.
This also provides us with the capability to better interchange the functionality supported by the datagram session manager in the future with a new mechanism.
Closes TUN-8661
For macOS, we want to set the DF bit for the UDP packets used by the QUIC
connection; to achieve this, you need to explicitly set the network
to either "udp4" or "udp6". When determining which network type to pick
we need to use the edge IP address chosen to align with what the local
IP family interface we will use. This means we want cloudflared to bind
to local interfaces for a random port, so we provide a zero IP and 0 port
number (ex. 0.0.0.0:0). However, instead of providing the zero IP, we
can leave the value as nil and let the kernel decide which interface and
pick a random port as defined by the target edge IP family.
This was previously broken for IPv6-only edge connectivity on macOS and
all other operating systems should be unaffected because the network type
was left as default "udp" which will rely on the provided local or remote
IP for selection.
Closes TUN-8688
Some more legacy h2mux code to be cleaned up and moved out of the way.
The h2mux.Header used in the serialization for http2 proxied headers is moved to connection module. Additionally, the booleanfuse structure is also moved to supervisor as it is also needed. Both of these structures could be evaluated later for removal/updates, however, the intent of the proposed changes here is to remove the dependencies on the h2mux code and removal.
Approved-by: Chung-Ting Huang <chungting@cloudflare.com>
Approved-by: Luis Neto <lneto@cloudflare.com>
Approved-by: Gonçalo Garcia <ggarcia@cloudflare.com>
MR: https://gitlab.cfdata.org/cloudflare/tun/cloudflared/-/merge_requests/1576
Whenever cloudflared receives a SIGTERM or SIGINT it goes into graceful shutdown mode, which unregisters the connection and closes the control stream. Unregistering makes it so we no longer receive any new requests and makes the edge close the connection, allowing in-flight requests to finish (within a 3 minute period).
This was working fine for http2 connections, but the quic proxy was cancelling the context as soon as the controls stream ended, forcing the process to stop immediately.
This commit changes the behavior so that we wait the full grace period before cancelling the request
Delaying the auto-update check timer to start after one full round of
the provided frequency reduces the chance of upgrading immediately
after starting.
In the rare case that the updater downloads the same binary (validated via checksum)
we want to make sure that the updater does not attempt to upgrade and restart the cloudflared
process. The binaries are equivalent and this would provide no value.
However, we are covering this case because there was an errant deployment of cloudflared
that reported itself as an older version and was then stuck in an infinite loop
attempting to upgrade to the latest version which didn't exist. By making sure that
the binary is different ensures that the upgrade will be attempted and cloudflared
will be restarted to run the new version.
This change only affects cloudflared tunnels running with default settings or
`--no-autoupdate=false` which allows cloudflared to auto-update itself in-place. Most
distributions that handle package management at the operating system level are
not affected by this change.
Revert "TUN-8621: Fix cloudflared version in change notes."
Revert "PPIP-2310: Update quick tunnel disclaimer"
Revert "TUN-8621: Prevent QUIC connection from closing before grace period after unregistering"
Revert "TUN-8484: Print response when QuickTunnel can't be unmarshalled"
Revert "TUN-8592: Use metadata from the edge to determine if request body is empty for QUIC transport"
Whenever cloudflared receives a SIGTERM or SIGINT it goes into graceful shutdown mode, which unregisters the connection and closes the control stream. Unregistering makes it so we no longer receive any new requests and makes the edge close the connection, allowing in-flight requests to finish (within a 3 minute period).
This was working fine for http2 connections, but the quic proxy was cancelling the context as soon as the controls stream ended, forcing the process to stop immediately.
This commit changes the behavior so that we wait the full grace period before cancelling the request
The rework consists in building and packaging the cloudflared binary based on the OS & ARCH of the system.
read TARGET_ARCH from export and exit if TARGET_ARCH is not set
- remove unused targets in Makefile
- order deps in cfsetup.yaml
- only build cloudflared not all linux targets
- rename stages to be more explicit
- adjust build deps of build-linux-release
- adjust build deps of build-linux-fips-release
- rename github_release_pkgs_pre_cache to build_release_pre_cache
- only build release release artifacts within build-linux-release
- only build release release artifacts within build-linux-fips-release
- remove github-release-macos
- remove github-release-windows
- adjust builddeps of test and test-fips
- create builddeps anchor for component-test and use it in component-test-fips
- remove wixl from build-linux-*
- rename release-pkgs-linux to r2-linux-release
- add github-release: artifacts uplooad and set release message
- clean build directory before build
- add step to package windows binaries
- refactor windows script
One of TeamCity changes is moving the artifacts to the built artifacts, hence, there is no need to cp files from artifacts to built_artifacts
- create anchor for release builds
- create anchor for tests stages
- remove reprepro and createrepo as they are only called by release_pkgs.py