6cdd20e820
TUN-3792: Handle graceful shutdown correctly when running as a windows service. Only expose one shutdown channel globally, which now triggers the graceful shutdown sequence across all modes. Removed separate handling of zero-duration grace period, instead it's checked only when we need to wait for exit.
2021-01-27 07:21:34 -06:00
d503aeaf77
TUN-3118: Changed graceful shutdown to immediately unregister tunnel from the edge, keep the connection open until the edge drops it or grace period expires
2021-01-22 11:14:36 -06:00
4a76ed12e7
TUN-3766: Print flags defined at all levels of command hierarchy, not just locally defined flags for a command. This fixes output of overriden settings for subcommand.
2021-01-18 11:16:42 +00:00
04b1e4f859
TUN-3738: Refactor observer to avoid potential of blocking on tunnel notifications
2021-01-18 11:16:23 +00:00
7c3ceeeaef
TUN-3757: Fix legacy Uint flags that are incorrectly handled by ufarve library
...
The following UInt flags:
* Uint64 - heartbeat-count, compression-quality
* Uint - retries, port, proxy-port
were not being correctly picked from the configuration YAML
since the multi origin refactor
This is due to a limitation of the ufarve library, which we
overcome for now with handling those as Int flags.
2021-01-14 13:08:55 +00:00
9ed536c990
TUN-3738: Consume UI events even when UI is disabled
...
Not doing so was causing cloudflared to become stuck after
some time. This would happen because the Observer pattern
was sending events to the UI channel (that has 16 slots) but
no one was consuming those when the UI is not enabled (which
is the default case).
Hence, events (such as connection disconnect / reconnect) would
cause that buffer to be full and cause cloudflared to become
apparently stuck, in the sense that the connections would not be
reconnected.
2021-01-13 13:10:30 +00:00
94ca4f98dd
Review from Igor
2021-01-11 19:36:31 +00:00
b601b24f52
Adam's suggestions
2021-01-11 19:36:31 +00:00
b40d8557cf
TUN-3691: Edit Teamnet help text
2021-01-11 19:36:31 +00:00
78ffb1b846
TUN-3688: Subcommand for users to check which route an IP proxies through
2021-01-07 15:31:26 +00:00
55bf904689
TUN-3471: Add structured log context to logs
2021-01-05 20:21:16 +00:00
b855e33327
TUN-3706: Quit if any origin service fails to start
2020-12-30 13:48:19 -06:00
32336859f8
TUN-3689: Delete routes via cloudflared CLI
2020-12-29 13:53:48 -06:00
94c639d225
TUN-3669: Teamnet commands to add/show Teamnet routes.
2020-12-29 17:39:08 +00:00
2ea491b1d0
TUN-3607: Set up single-file logger with zerolog
2020-12-23 14:15:39 -06:00
870f5fa907
TUN-3470: Replace in-house logger calls with zerolog
2020-12-23 14:15:17 -06:00
1c0dac77d7
TUN-3599: improved delete if credentials isnt found.
...
Tunnel delete is successful even if we don't find the credentials
file in the user's filesystem. We no longer "error" indicating this
is a problem. This fix also enables chaining of the delete command
by removing a pre-mature return if the credentials file is not found.
2020-12-04 11:44:13 +00:00
38fb0b28b6
TUN-3593: /ready endpoint for k8s readiness. Move tunnel events out of UI package, into connection package.
2020-12-02 15:22:59 -06:00
69fd502db3
TUN-3581: Tunnels can be run by name using only --credentials-file, no
...
origin cert necessary.
2020-11-25 09:54:28 -06:00
fcc393e2f0
AUTH-3221: Saves org token to disk and uses it to refresh the app token
2020-11-24 21:38:59 +00:00
cad58b9b57
TUN-3561: Unified logger configuration
2020-11-23 16:49:07 +00:00
a08a7030d1
TUN-3578: cloudflared tunnel route dns should allow wildcard subdomains
2020-11-23 09:37:46 -06:00
029f7e0378
TUN-3555: Single origin service should default to localhost:8080
2020-11-17 23:12:32 +00:00
1475cf61ee
TUN-3534: Specific error message when credentials file is a .pem not .json
2020-11-12 16:38:24 +00:00
ebc003d478
TUN-3514: Transport logger write to UI when UI is enabled
2020-11-11 15:21:00 +00:00
5974fb4cfd
TUN-3500: Integrate replace h2mux by http2 work with multiple origin support
2020-11-11 15:20:57 +00:00
a490443630
TUN-3458: Upgrade to http2 when available, fallback to h2mux when we reach max retries
2020-11-11 15:11:42 +00:00
b5cdf3b2c7
TUN-3456: New protocol option auto to automatically select between http2 and h2mux
2020-11-11 15:11:42 +00:00
9ac40dcf04
TUN-3462: Refactor cloudflared to separate origin from connection
2020-11-11 15:11:42 +00:00
8d7b2575ba
TUN-3400: Use Go HTTP2 library as transport to connect with the edge
2020-11-11 15:11:42 +00:00
d7498b0c03
TUN-3449: Use flag to select transport protocol implementation
2020-11-11 15:11:42 +00:00
196762d9d3
TUN-3527: More specific error for invalid YAML/JSON
2020-11-10 21:42:26 +00:00
4698ec8dee
TUN-3461: Show all origin services in the UI
2020-11-10 14:25:37 +00:00
64d3836645
TUN-3522: ingress validate checks that the config file exists
2020-11-09 12:31:50 -06:00
d01770107e
TUN-3492: Refactor OriginService, shrink its interface
2020-11-04 21:28:33 +00:00
e933ef9e1a
TUN-2640: Users can configure per-origin config. Unify single-rule CLI
...
flow with multi-rule config file code.
2020-10-30 07:42:20 -05:00
f0cfad8efa
TUN-3476: Fix conversion to string and int slice
2020-10-21 16:03:25 +01:00
ed54d150fe
Move raw ingress rules to config package
2020-10-20 12:00:34 -05:00
ca4887fb19
Split out typed config from legacy command-line switches; refactor ingress commands and fix tests
2020-10-20 10:10:19 -05:00
eaf03305bd
TUN-3475: Unify config file handling with typed config for new fields
2020-10-20 08:55:30 -05:00
051908aaef
TUN-3463: Let users run a named tunnel via config file setting
2020-10-19 12:27:18 +00:00
c96b9e8d8f
TUN-3464: Newtype to wrap []ingress.Rule
2020-10-15 12:48:14 -05:00
4a4a1bb6b1
TUN-3441: Multiple-origin routing via ingress rules
2020-10-13 08:55:17 -05:00
0eebc7cef9
TUN-3438: move ingress into own package, read into TunnelConfig
2020-10-12 16:33:22 +00:00
53a1fa46a8
TUN-3452: Fix loading of flags from config file for tunnel run subcommand. This change also cleans up building of tunnel subcommand list, hides deprecated subcommands and improves help.
2020-10-09 12:07:17 -05:00
86a7af3dc4
TUN-3451: Cloudflared tunnel ingress command
2020-10-08 22:06:40 +00:00
407c9550d7
TUN-3440: 'tunnel rule' command to test ingress rules
2020-10-08 22:06:40 +00:00
2319003e10
TUN-3439: 'tunnel validate' command to check ingress rules
2020-10-08 22:06:40 +00:00
b05d826d22
TUN-3436, TUN-3437: Parse ingress from YAML, ensure last rule catches everything
2020-10-07 16:36:28 +00:00
03d7320a44
TUN-3430: Copy flags to configure proxy to run subcommand, print relevant tunnel flags in help
2020-10-01 21:44:27 +00:00
8e8513e325
TRAFFIC-448: allow the user to specify the proxy address and port to bind to, falling back to 127.0.0.1 and random port if not specified
2020-09-25 09:54:40 -05:00
197d65659a
TUN-3291: cloudflared tunnel run -h explains how to use flags from parent command
2020-09-21 19:07:30 +00:00
85d0afd3b0
TUN-3295: Show route command results
2020-09-21 16:32:08 +00:00
747427f816
TUN-3216: UI improvements
2020-09-17 13:22:08 +04:00
26fc20d406
TUN-3198: Handle errors while running tunnel UI
2020-09-17 11:52:10 +04:00
fee13dc62f
TUN-3255: Update UI to display URL instead of hostname
2020-09-17 11:52:10 +04:00
b57a953caa
TUN-3200: Add connection information to UI
2020-09-17 11:52:10 +04:00
d8ebde37ca
TUN-3201: Create base cloudflared UI structure
2020-09-17 11:52:07 +04:00
cb6d424765
TUN-3395: Improve help for list command
2020-09-16 16:48:43 +00:00
5753aa9f18
TUN-3294: Perform basic validation on arguments of route command; remove default pool name which wasn't valid
2020-09-16 16:48:43 +00:00
bfae12008d
TUN-3395: Improve help for list command
2020-09-16 08:30:24 -05:00
c52e0dc8ef
TUN-3395: Unhide named tunnel subcommands, tweak help
2020-09-15 12:41:15 +00:00
3be2545ad4
TUN-3292: Mention cleanup in tunnel run help.
2020-09-10 11:02:31 -05:00
22d771b51d
TUN-3284: Use cloudflared/<version> as user agent of tunnelstore client
2020-09-09 10:34:26 +01:00
5fb938d6d6
TUN-3345: tunnel run accepts name of tunnel as argument
2020-09-05 09:32:50 +00:00
218ee30206
TUN-3377: Tunnel route should check dns/lb before checking tunnel ID
2020-09-04 18:44:06 +00:00
1a96889141
TUN-3286: Use either ID or name in Named Tunnel subcommands.
2020-08-19 14:39:45 +00:00
3deef6197f
TUN-3213: Create, route and run named tunnels in one command
2020-08-17 19:38:38 +00:00
5499c77e62
AUTH-2975 don't check /etc on windows
2020-08-17 12:40:36 -05:00
292a7f07a2
TUN-3243: Refactor tunnel subcommands to allow commands to compose better
2020-08-11 10:02:52 +01:00
1b61d699c4
TUN-3237: By default, don't show connections that are pending reconnect
2020-08-07 10:16:13 -05:00
a7562dff68
TUN-3233: List tunnels support filtering by deleted, name, existed at and id
2020-08-07 10:09:26 +01:00
1cbc8fb8ac
TUN-3220: tunnel route reports created route
2020-07-31 17:48:58 +01:00
d61e3fb130
TUN-3190: Initialize logger using command line flags in tunnels subcommands
2020-07-21 17:25:48 +00:00
ca7d6797e1
AUTH-2902 redirect with just the root host on curl commands
2020-07-21 11:08:31 -05:00
8836ee1dda
TUN-3156: Add route subcommand under tunnel
2020-07-17 05:51:24 +08:00
3d782f7162
TUN-3048: Handle error when user tries to delete active tunnel
2020-07-14 15:32:46 +00:00
f7ff41f1dc
TUN-3150: cloudflared tunnel list's table should use intelligent column width
2020-07-07 15:48:56 +00:00
f5c8ff77e9
TUN-3008: Implement cloudflared tunnel cleanup command
2020-07-07 21:56:46 +08:00
87e06100df
TUN-3131: Allow user to specify tunnel credentials path, and remove it in tunnel delete command
2020-07-07 14:22:08 +08:00
2a3d486126
TUN-3007: Implement named tunnel connection registration and unregistration.
...
Removed flag for using quick reconnect, this logic is now always enabled.
2020-07-01 04:19:30 +00:00
4d3ebaf984
TUN-3106: Pass NamedTunnel config to StartServer
2020-06-17 23:20:37 +00:00
a1a8645294
TUN-3066: Command line action for tunnel run
2020-06-17 17:25:23 +00:00
b95b289a8c
TUN-3101: Tunnel list command should only show non-deleted, by default
2020-06-16 17:55:33 -05:00
425554077f
AUTH-2815 flag check was wrong. stupid oversight
2020-06-16 16:19:38 -05:00
6e5ccd7c85
AUTH-2815 add the log file to support the config.yaml file
...
added small delay to handle the possiblity of the server not being started yet
2020-06-16 17:48:12 +00:00
3ec500bdbb
TUN-3084: Generate and store tunnel_secret value during tunnel creation
2020-06-16 11:45:27 -05:00
55acf7283c
AUTH-2810 added warn for backwards compatibility sake
2020-06-12 22:15:28 +00:00
acb7d604fd
TUN-3038: Add connections to tunnel list table
2020-06-12 11:43:06 -05:00
ae8d784e36
AUTH-2763 don't redirect from curl command
2020-06-11 15:38:11 -05:00
c716dd273c
AUTH-2648 updated usage text
2020-06-11 11:08:05 -05:00
f8638839c0
AUTH-2729 added log file and level to cmd flags to match config file settings
2020-06-08 19:42:34 +00:00
e376a13025
AUTH-2645 protect against user mistaken flag input
2020-06-05 15:10:09 -05:00
fb82b2ced5
TUN-3019: Remove declarative tunnel entry code
2020-05-30 05:54:17 +08:00
046be63253
AUTH-2596 added new logger package and replaced logrus
2020-05-27 17:07:19 -05:00
a908453aa4
TUN-2928, TUN-2929, TUN-2930: Add tunnel subcommands to interact with tunnel store service
2020-05-21 15:36:49 -05:00
b89cc22896
AUTH-2369: RDP Bastion prototype
2020-05-19 21:10:50 -05:00
6a7418e1af
AUTH-2686: Added error handling to tunnel subcommand
2020-05-18 15:36:25 -05:00
8c870c19a6
AUTH-2505 added aliases
2020-05-13 15:15:08 -05:00
8cc69f2a95
TUN-2860: Enable quick reconnect feature by default
2020-05-07 14:41:55 -05:00
c3fa4552aa
TUN-2872: Exit with non-0 status code when the binary is updated so launchd will restart the service
2020-05-06 05:53:14 +08:00
dd0881f32b
TUN-2940: Added delay parameter to stdin reconnect command.
2020-05-01 15:58:19 +00:00
f18209af7d
ARES-899: Fixes DoH client as system resolver. Fixes #91
2020-04-14 12:37:59 -05:00
a37da2b165
AUTH-2394 added socks5 proxy
2020-04-07 13:30:28 -05:00
ae374c0463
TUN-2846: Trigger debug reconnects from stdin commands, not SIGUSR1
2020-03-27 17:04:21 +00:00
a368fbbe9b
AUTH-2394 fixed header for websockets. Added TCP alias
2020-03-23 10:27:53 -05:00
6dcf3a4cbc
TUN-2819: cloudflared should close its connections when a signal is sent
2020-03-19 21:02:15 +00:00
1b2a96f96b
TUN-2755: ReconnectTunnel RPC now transmits ConnectionDigest
2020-03-06 14:48:16 -06:00
6b3e2b020b
TUN-2785: Use reconnect token by default
2020-03-05 16:12:49 +00:00
29f4650e25
do not terminate tunnel if origin is not reachable on start-up ( #177 )
2020-02-27 23:03:00 +00:00
a83b6a2155
TUN-2725: Specify in code that --edge is for internal testing only
2020-02-19 16:18:48 -06:00
a60c0273f5
TUN-2714: New edge discovery. Connections try to reconnect to the same edge IP.
2020-02-14 19:49:54 +00:00
dfe61fda88
TUN-2645: Revert "TUN-2645: Turn on reconnect tokens"
...
This reverts commit 053b2c17f1
2020-01-27 14:59:07 -06:00
053b2c17f1
TUN-2645: Turn on reconnect tokens
2020-01-13 15:23:42 -06:00
cc2a1d1204
bug(cloudflared): Set the MaxIdleConnsPerHost of http.Transport to proxy-keepalive-connections ( #155 )
...
Setting the MaxIdleConns is not enough, the MaxIdleConnsPerHost must be set as well.
Otherwise, http.Transport will use the DefaultMaxIdleConnsPerHost, which is 2,
and then the connection pool will have only 2 connection hold.
2019-12-17 05:02:28 +04:00
5e7ca14412
TUN-2555: origin/supervisor.go calls Authenticate
2019-12-06 11:26:54 -06:00
43babbc2f9
Fix "happy eyeballs" not being disabled since Golang 1.12 upgrade
...
* The Dialer.DualStack setting is now ignored and deprecated; RFC 6555 Fast Fallback ("Happy Eyeballs") is now enabled by default. To disable, set Dialer.FallbackDelay to a negative value.
2019-11-25 17:54:20 +00:00
759cd019be
Add db-connect, a SQL over HTTPS server
2019-11-12 20:34:39 +00:00
28cc1c65af
AUTH-2167: Adds CLI option for host key directory
2019-10-17 16:31:43 -05:00
8b6e3bc1d1
AUTH-2159: Moves shutdownC close into error handling
...
AUTH-2161: Lowers size of preamble length
AUTH-2160: Fixes url parsing logic
2019-10-16 11:41:51 -05:00
95704b11fb
AUTH-2114: Uses short lived cert auth for outgoing client connection
2019-10-15 14:35:15 -05:00
91d9dca34e
AUTH-2105: Adds support for local forwarding. Refactor auditlogger creation.
...
AUTH-2088: Adds dynamic destination routing
2019-10-10 15:25:03 -05:00
dbde3870da
AUTH-2089: Revise ssh server to function as a proxy
2019-10-07 13:04:04 -05:00
979e5be8ab
AUTH-2067: Log commands correctly
2019-09-23 20:42:41 +00:00
4f23da2a6d
TUN-2315: Replace Scope with IntentLabel
2019-09-18 15:11:46 -05:00
ff795a7beb
AUTH-2056: Writes stderr to its own stream for non-pty connections
2019-09-16 14:43:05 -05:00
c2a71c5a51
AUTH-2037: Adds support for ssh port forwarding
2019-09-11 10:41:09 -05:00
d3b254f9ae
AUTH-2036: Refactor user retrieval, shutdown after ssh server stops, add custom version string
2019-09-09 17:31:23 +00:00
ee588eeeaa
AUTH-1943 hooked up uploader to logger, added timestamp to session logs, add tests
2019-09-06 15:57:32 -05:00
dd521aba29
TUN-2280: Revert "TUN-2260: add name/group to CapnpConnectParameters, remove Scope"
...
This reverts commit 817c3be9da5465043c2a2fda6c48f7ada760682e.
2019-09-06 15:59:32 +00:00
a06390a078
TUN-2201: change SRV records used by cloudflared
...
This changes cloudflarewarp.com to argotunnel.com and _warp to
_origintunneld. We've changed which zone we host the SRV records
for Argo Tunnel on.
2019-09-06 15:01:58 +00:00
dc730615f2
TUN-2260: add name/group to CapnpConnectParameters, remove Scope
2019-09-05 15:36:16 +00:00
5e85a8bd16
AUTH-1943: Adds session logging
2019-09-03 13:54:29 -05:00
7abbe91d41
AUTH-2030: Support both authorized_key and short lived cert authentication simultaniously without specifiying at start time
2019-08-30 19:23:10 +00:00
ff97fb6dc8
Merge branch 'master' of github.com:cloudflare/cloudflared
2019-08-30 13:45:40 -05:00
dc48cdce1a
Fix #111 : Add support for specifying a specific HTTP Host: header on the origin. ( #114 )
2019-08-29 22:55:54 -05:00
f130e6d4d7
AUTH-2021 - s3 bucket uploading for SSH logs
2019-08-29 16:54:54 -05:00
858ef29868
AUTH-2022: Adds ssh timeout configuration
2019-08-28 15:22:35 -05:00
baec3e289e
AUTH-2018: Adds support for authorized keys and short lived certs
2019-08-28 09:58:42 -05:00
df25ed9bde
TUN-2244: Add NO_AUTOUPDATE env var
2019-08-27 15:53:28 -05:00
4e1df1a211
TUN-2243: Revert "STOR-519: Add db-connect, a SQL over HTTPS server"
...
This reverts commit 5da2109811
2019-08-26 16:50:12 -05:00
30c9e2af9b
AUTH-1941: Adds initial SSH server implementation
2019-08-21 15:49:03 -05:00
47254113ee
Revert "AUTH-1941: Adds initial SSH server implementation"
...
This reverts commit e9c9bf3cbd
2019-08-20 17:20:48 -05:00
e9c9bf3cbd
AUTH-1941: Adds initial SSH server implementation
2019-08-20 16:18:37 -05:00
5da2109811
STOR-519: Add db-connect, a SQL over HTTPS server
2019-08-20 13:13:29 -05:00
bdd70e798a
TUN-2110: Implement custom deserialization logic for OriginConfig
2019-08-05 19:28:51 -05:00
74f3a55c57
TUN-2117: read group/system-name from CLI, send it to edge
2019-08-01 22:04:05 +00:00
4858ce79d0
TUN-1977: Validate OriginConfig has valid URL, and use scheme to determine if a HTTPOriginService is expecting HTTP or Unix
2019-07-01 15:31:58 -05:00
0a742feb98
TUN-1885: Reconfigure cloudflared on receiving new ClientConfig
2019-06-20 19:07:59 -05:00
80a15547e3
TUN-1961: Create EdgeConnectionManager to maintain outbound connections to the edge
2019-06-18 16:37:38 -05:00
d32fb8e82c
TUN-1913: Define OriginService for each type of origin
2019-06-04 17:02:34 -05:00
4662e40068
TUN-1880: Save debug and warn level log to logfile
2019-05-22 11:05:24 -05:00
28f890a701
TUN-1669: Update license message in help text. Also fix test
2019-04-18 10:42:48 -05:00
102b364cc9
TUN-1619: Add flag to test declarative tunnels.
2019-04-05 10:35:23 -05:00
6804a5ff9d
TUN-1648: ConnectionID is now a UUID
2019-03-28 15:03:30 -05:00
8560436487
TUN-1637: Free tunnels shouldn't require cert.pem
2019-03-22 14:43:30 -05:00
b02718f86b
TUN-1389: Non-scalar flags in a cloudflared config.yml don't get logged
2019-03-08 02:43:07 -06:00
5a0b7ecb62
Merge branch 'master' of github.com:cloudflare/cloudflared
2019-03-06 18:34:42 -06:00
07a409ffef
Support unix sockets.
2019-03-06 18:33:23 -06:00
073c5bfdaa
TUN-1562: Refactor connectedSignal to be safe to close multiple times
2019-03-05 15:51:35 -06:00
abdbc76a46
TUN-1559: fix nil dereference in TunnelConfig.CloseConnOnce
2019-02-28 16:56:47 -06:00
7475e3e487
TUN-1510: Wrap the close() in sync.Once.Do
2019-02-26 10:32:07 -06:00
200f9a3786
AUTH-1503: Added RDP support
2019-02-08 14:28:47 -06:00
47c878b9c4
TUN-1419: Identify request/response headers/content length with ray ID
2019-01-28 16:52:17 -06:00
61cd4a918d
TUN-1418: Rename ProtocolLogger to TransportLogger, and use TransportLogger to log RPC events.
2019-01-28 16:09:58 -06:00
62b1ab8c98
TUN-1350: Enhance error messages with cloudflarestatus.com link, if relevant
2019-01-18 13:37:05 -06:00
8de19dc647
TUN-1265: Silent exit when failing to parse config
2019-01-08 15:51:43 -06:00
69ee6c1d88
TUN-1204: remove 'cloudflared hello' command
2018-12-03 16:31:20 -06:00
b59fd4b7d8
TUN-1196: Allow TLS config client CA and root CA to be constructed from multiple certificates
2018-11-19 15:38:10 -06:00
c2ac282aca
TUN-1190: check URL parse error when starting SSH proxy server
2018-11-14 12:16:12 -06:00
83c6c8713b
TUN-1160: pass Host header during origin url validation
2018-10-30 13:58:07 -05:00
80a75e91d2
AUTH-1188: UX Review and Changes for CLI SSH Access
2018-10-25 15:50:27 -05:00
fa92441415
AUTH-1070: added SSH/protocol forwarding
2018-10-11 11:34:37 -05:00
ca9902a8d1
TUN-1099: Bring back changes in 2018.10.1
2018-10-08 14:20:28 -05:00
faeba02e57
TUN-1093: Revert cloudflared to 2018.8.0
2018-10-06 14:30:51 -05:00
5cd4fab9dd
TUN-1086: fixed config option
2018-10-05 14:58:21 -05:00
f7b1f7cb22
TUN-1012: Normalize config filename for Linux services
2018-10-05 11:58:59 -05:00
4c464e1adf
TUN-1056: Lint error broke build
2018-09-28 16:07:57 -05:00
1a5e82bc04
TUN-1046: Document that delta compression is a beta feature
2018-09-28 16:07:57 -05:00
170f0acf4f
AUTH-1136: addressing beta feedback
2018-09-28 16:07:57 -05:00
674eb33edc
TUN-1035: New text for cloudflared tunnel --help
2018-09-28 16:07:57 -05:00
c10852a5e3
AUTH-1139: refactored cloudflared help menu
2018-09-28 16:07:57 -05:00
653f000294
TUN-1028: Unhide cloudflared compression flag
2018-09-28 16:07:57 -05:00
dd2b5e4f3e
TUN-868: HTTP/HTTPS mismatch should have a better error message
2018-09-28 16:06:41 -05:00
e2194f9417
TUN-810: Cloudflared should open dash/argotunnel not dash/warp
2018-09-28 16:06:20 -05:00
d0bc4d0d96
TUN-890: To support free tunnels, hostname can now be ""
2018-09-28 16:05:54 -05:00
4f04f35bd1
AUTH-910, AUTH-1049, AUTH-1068, AUTH-1056: Generate and store Access tokens with E2EE option, curl/cmd wrapper
2018-09-28 16:05:15 -05:00
Igor Postelnik
Nuno Diegues
Adam Chalmers
TownLake
Areg Harutyunyan
Sudarsan Reddy
Michael Borkenstein
cthuang
Lee Valentine
Rachel Williams
Dalton
cthuang
Austin Cherry
Roman Iuvshyn
Rueian
Nick Vollmar
Ashcon Partovi
David Barr
Kristian Mide