Commit Graph

221 Commits

Author SHA1 Message Date
Nuno Diegues a1d485eca5 TUN-5823: Warn about legacy flags that are ignored when ingress rules are used 2022-03-02 10:48:03 +00:00
cthuang d68ff390ca TUN-5698: Make ingress rules and warp routing dynamically configurable 2022-02-16 09:38:28 +00:00
cthuang e22422aafb TUN-5749: Refactor cloudflared to pave way for reconfigurable ingress
- Split origin into supervisor and proxy packages
- Create configManager to handle dynamic config
2022-02-14 15:37:09 +00:00
Sudarsan Reddy 1a92f1acfe TUN-5477: Unhide vnet commands 2022-01-21 12:41:58 +00:00
Nuno Diegues a39d95d5f7 TUN-5551: Show whether the binary was built for FIPS compliance
This is shown in 3 ways:
 - the version output with `cloudflared version` and alike commands
 - the build_info prometheus metric
 - a logging message
2021-12-28 19:03:16 +00:00
Nuno Diegues 6822e4f8ab TUN-5482: Refactor tunnelstore client related packages for more coherent package 2021-12-28 17:17:49 +00:00
Nuno Diegues eec6b87eea TUN-5361: Commands for managing virtual networks 2021-12-03 08:48:52 +00:00
Silver 36479ef11f
Merge pull request #478 from echtish/secret-flag
Add flag to 'tunnel create' subcommand to specify a base64-encoded secret
2021-11-02 16:21:01 -05:00
Nuno Diegues 958650be1f TUN-5262: Improvements to `max-fetch-size` that allow to deal with large number of tunnels in account
* `max-fetch-size` can now be set up in the config YAML
 * we no longer pass that to filter commands that filter by name
 * flag changed to signed int since altsrc does not support UInt flags
 * we now look up each non UUID (to convert it to a UUID) when needed, separately
2021-10-19 18:28:29 +01:00
Nuno Diegues eb51ff0a6d TUN-5262: Allow to configure max fetch size for listing queries
This can be useful/important for accounts with many tunnels that exceed
the 1000 default page size.

There are various tunnel subcommands that use listing underneath, so we make
that flag a tunnel one, rather than adding it to each subcommand.
2021-10-18 11:07:02 +01:00
Jeremy Teale 1239006e96 Add flag to 'tunnel create' subcommand to specify a base64-encoded secret 2021-09-29 18:56:38 -05:00
Nuno Diegues cbdf88ea28 TUN-5164: Update README and clean up references to Argo Tunnel (using Cloudflare Tunnel instead) 2021-09-29 08:27:47 +00:00
Nuno Diegues f985ed567f TUN-5128: Enforce maximum grace period
This maximum grace period will be honored by Cloudflare edge such that
either side will close the connection after unregistration at most
by this time (3min as of this commit):
 - If the connection is unused, it is already closed as soon as possible.
 - If the connection is still used, it is closed on the cloudflared configured grace-period.

Even if cloudflared does not close the connection by the grace-period time,
the edge will do so.
2021-09-21 16:48:37 +00:00
cthuang 98c3957d30 TUN-5010: --region should be a string flag 2021-08-30 14:40:07 +00:00
cthuang 27cd83c2d3 Revert "TUN-4926: Implement --region configuration option"
This reverts commit d0a1daac3b.
2021-08-28 16:42:55 +01:00
Areg Harutyunyan d0a1daac3b TUN-4926: Implement --region configuration option 2021-08-27 09:11:10 +00:00
Rishabh Bector a4a9f45b0a TUN-4821: Make quick tunnels the default in cloudflared 2021-08-26 15:53:02 +00:00
Nuno Diegues aa24338225 TUN-4832: Prevent tunnel from running accidentally when only proxy-dns should run 2021-07-29 11:05:12 +00:00
Sudarsan Reddy ed1389ef08 TUN-4814: Revert "TUN-4699: Make quick tunnels the default in cloudflared"
This reverts commit 18992efa0c.
2021-07-28 10:02:55 +01:00
Rishabh Bector 18992efa0c TUN-4699: Make quick tunnels the default in cloudflared 2021-07-26 15:57:36 +00:00
Rishabh Bector 59cae0f622 TUN-4698: Add cloudflared metrics endpoint to serve quick tunnel hostname 2021-07-12 09:26:07 +00:00
Rishabh Bector 3eb9efd9f0 TUN-4521: Modify cloudflared to use zoneless-tunnels-worker for free tunnels 2021-06-29 09:39:18 +01:00
Adam Chalmers 4c5ebccacc TUN-4425: --overwrite-dns flag for in adhoc and route dns cmds 2021-05-19 18:22:01 +00:00
Nuno Diegues ae460b340b
TUN-4342: Fix false positive warning about unused hostname property 2021-05-13 02:05:19 +01:00
Adam Chalmers 4bd17766a9
TUN-4359: Warn about unused keys in 'tunnel ingress validate' 2021-05-13 02:05:19 +01:00
Areg Harutyunyan 1073f8db40
TUN-2853: rename STDIN-CONTROL env var to STDIN_CONTROL 2021-04-09 16:43:01 +01:00
Nuno Diegues b25d38dd72 TUN-4177: Running with proxy-dns should not prevent running Named Tunnels 2021-04-05 11:28:05 +01:00
Adam Chalmers ebf5292bf9 TUN-4146: Unhide and document grace-period 2021-03-29 16:29:18 -05:00
Igor Postelnik da4d0b2bae TUN-4067: Reformat code for consistent import order, grouping, and fix formatting. Added goimports target to the Makefile to make this easier in the future. 2021-03-24 10:53:29 -05:00
Nuno Diegues 89d0e45d62 TUN-3993: New `cloudflared tunnel info` to obtain details about the active connectors for a tunnel 2021-03-17 14:08:18 +00:00
Igor Postelnik a34099724e TUN-4094: Don't read configuration file for access commands 2021-03-16 17:36:46 -05:00
Igor Postelnik 8c5498fad1 TUN-3715: Only read config file once, right before invoking the command 2021-03-16 17:22:13 -05:00
Adam Chalmers 2c746b3361 TUN-4081: Update log severities to use Zerolog's levels 2021-03-16 19:04:49 +00:00
Igor Postelnik 39065377b5 TUN-4063: Cleanup dependencies between packages.
- Move packages the provide generic functionality (such as config) from `cmd` subtree to top level.
- Remove all dependencies on `cmd` subtree from top level packages.
- Consolidate all code dealing with token generation and transfer to a single cohesive package.
2021-03-09 14:02:59 +00:00
Nuno Diegues bcd71b56e9 TUN-3989: Check in with Updater service in more situations and convey messages to user 2021-03-03 13:57:04 +00:00
Igor Postelnik a8ae6de213 TUN-3924: Removed db-connect command. Added a placeholder handler for this command that informs users that command is no longer supported. 2021-02-17 20:13:51 -06:00
David Jimenez d7c4a89106
Add max upstream connections dns-proxy option (#290)
* Add max upstream connections dns-proxy option

Allows defining a limit to the number of connections that can be
established with the upstream DNS host.

If left unset, there may be situations where connections fail to
establish, which causes the Transport to create an influx of connections
causing upstream to throttle our requests and triggering a runaway
effect resulting in high CPU usage. See https://github.com/cloudflare/cloudflared/issues/91

* Code review with proposed changes

* Add max upstream connections flag to tunnel flags

* Reduce DNS proxy max upstream connections default value

Reduce the default value of maximum upstream connections on the DNS
proxy to guarantee it works on single-core and other low-end hardware.
Further testing could allow for a safe increase of this value.

* Update dns-proxy flag name

Also remove `MaxUpstreamConnsFlag` const as it's no longer referenced in more than one place and to make things more consistent with how the other flags are referenced.

Co-authored-by: Adam Chalmers <achalmers@cloudflare.com>
2021-02-12 21:32:29 +04:00
Adam Chalmers dbd90f270e TUN-3864: Users can choose where credentials file is written after creating a tunnel 2021-02-05 11:20:51 -06:00
Adam Chalmers 0d22106416 TUN-3848: Use transport logger for h2mux 2021-02-03 17:31:16 -06:00
Igor Postelnik 6cdd20e820 TUN-3792: Handle graceful shutdown correctly when running as a windows service. Only expose one shutdown channel globally, which now triggers the graceful shutdown sequence across all modes. Removed separate handling of zero-duration grace period, instead it's checked only when we need to wait for exit. 2021-01-27 07:21:34 -06:00
Igor Postelnik d503aeaf77 TUN-3118: Changed graceful shutdown to immediately unregister tunnel from the edge, keep the connection open until the edge drops it or grace period expires 2021-01-22 11:14:36 -06:00
Igor Postelnik 04b1e4f859 TUN-3738: Refactor observer to avoid potential of blocking on tunnel notifications 2021-01-18 11:16:23 +00:00
Nuno Diegues 7c3ceeeaef TUN-3757: Fix legacy Uint flags that are incorrectly handled by ufarve library
The following UInt flags:
 * Uint64 - heartbeat-count, compression-quality
 * Uint - retries, port, proxy-port

were not being correctly picked from the configuration YAML
since the multi origin refactor

This is due to a limitation of the ufarve library, which we
overcome for now with handling those as Int flags.
2021-01-14 13:08:55 +00:00
Nuno Diegues 9ed536c990 TUN-3738: Consume UI events even when UI is disabled
Not doing so was causing cloudflared to become stuck after
some time. This would happen because the Observer pattern
was sending events to the UI channel (that has 16 slots) but
no one was consuming those when the UI is not enabled (which
is the default case).

Hence, events (such as connection disconnect / reconnect) would
cause that buffer to be full and cause cloudflared to become
apparently stuck, in the sense that the connections would not be
reconnected.
2021-01-13 13:10:30 +00:00
Areg Harutyunyan 55bf904689 TUN-3471: Add structured log context to logs 2021-01-05 20:21:16 +00:00
Adam Chalmers b855e33327 TUN-3706: Quit if any origin service fails to start 2020-12-30 13:48:19 -06:00
Areg Harutyunyan 870f5fa907 TUN-3470: Replace in-house logger calls with zerolog 2020-12-23 14:15:17 -06:00
Adam Chalmers 38fb0b28b6 TUN-3593: /ready endpoint for k8s readiness. Move tunnel events out of UI package, into connection package. 2020-12-02 15:22:59 -06:00
Areg Harutyunyan cad58b9b57 TUN-3561: Unified logger configuration 2020-11-23 16:49:07 +00:00
Adam Chalmers 029f7e0378 TUN-3555: Single origin service should default to localhost:8080 2020-11-17 23:12:32 +00:00
cthuang ebc003d478 TUN-3514: Transport logger write to UI when UI is enabled 2020-11-11 15:21:00 +00:00
cthuang 5974fb4cfd TUN-3500: Integrate replace h2mux by http2 work with multiple origin support 2020-11-11 15:20:57 +00:00
cthuang 9ac40dcf04 TUN-3462: Refactor cloudflared to separate origin from connection 2020-11-11 15:11:42 +00:00
cthuang d7498b0c03 TUN-3449: Use flag to select transport protocol implementation 2020-11-11 15:11:42 +00:00
Adam Chalmers 4698ec8dee TUN-3461: Show all origin services in the UI 2020-11-10 14:25:37 +00:00
Adam Chalmers d01770107e TUN-3492: Refactor OriginService, shrink its interface 2020-11-04 21:28:33 +00:00
Adam Chalmers e933ef9e1a TUN-2640: Users can configure per-origin config. Unify single-rule CLI
flow with multi-rule config file code.
2020-10-30 07:42:20 -05:00
cthuang f0cfad8efa TUN-3476: Fix conversion to string and int slice 2020-10-21 16:03:25 +01:00
Igor Postelnik ca4887fb19 Split out typed config from legacy command-line switches; refactor ingress commands and fix tests 2020-10-20 10:10:19 -05:00
Igor Postelnik eaf03305bd TUN-3475: Unify config file handling with typed config for new fields 2020-10-20 08:55:30 -05:00
Igor Postelnik 051908aaef TUN-3463: Let users run a named tunnel via config file setting 2020-10-19 12:27:18 +00:00
Adam Chalmers 4a4a1bb6b1 TUN-3441: Multiple-origin routing via ingress rules 2020-10-13 08:55:17 -05:00
Adam Chalmers 0eebc7cef9 TUN-3438: move ingress into own package, read into TunnelConfig 2020-10-12 16:33:22 +00:00
Igor Postelnik 53a1fa46a8 TUN-3452: Fix loading of flags from config file for tunnel run subcommand. This change also cleans up building of tunnel subcommand list, hides deprecated subcommands and improves help. 2020-10-09 12:07:17 -05:00
Adam Chalmers 86a7af3dc4 TUN-3451: Cloudflared tunnel ingress command 2020-10-08 22:06:40 +00:00
Adam Chalmers 407c9550d7 TUN-3440: 'tunnel rule' command to test ingress rules 2020-10-08 22:06:40 +00:00
Adam Chalmers 2319003e10 TUN-3439: 'tunnel validate' command to check ingress rules 2020-10-08 22:06:40 +00:00
cthuang 03d7320a44 TUN-3430: Copy flags to configure proxy to run subcommand, print relevant tunnel flags in help 2020-10-01 21:44:27 +00:00
Lee Valentine 8e8513e325 TRAFFIC-448: allow the user to specify the proxy address and port to bind to, falling back to 127.0.0.1 and random port if not specified 2020-09-25 09:54:40 -05:00
cthuang 197d65659a TUN-3291: cloudflared tunnel run -h explains how to use flags from parent command 2020-09-21 19:07:30 +00:00
Igor Postelnik 85d0afd3b0 TUN-3295: Show route command results 2020-09-21 16:32:08 +00:00
Areg Harutyunyan 747427f816 TUN-3216: UI improvements 2020-09-17 13:22:08 +04:00
Rachel Williams 26fc20d406 TUN-3198: Handle errors while running tunnel UI 2020-09-17 11:52:10 +04:00
Rachel Williams fee13dc62f TUN-3255: Update UI to display URL instead of hostname 2020-09-17 11:52:10 +04:00
Rachel Williams b57a953caa TUN-3200: Add connection information to UI 2020-09-17 11:52:10 +04:00
Rachel Williams d8ebde37ca TUN-3201: Create base cloudflared UI structure 2020-09-17 11:52:07 +04:00
cthuang 3deef6197f TUN-3213: Create, route and run named tunnels in one command 2020-08-17 19:38:38 +00:00
Dalton 5499c77e62 AUTH-2975 don't check /etc on windows 2020-08-17 12:40:36 -05:00
cthuang a7562dff68 TUN-3233: List tunnels support filtering by deleted, name, existed at and id 2020-08-07 10:09:26 +01:00
cthuang 8836ee1dda TUN-3156: Add route subcommand under tunnel 2020-07-17 05:51:24 +08:00
cthuang f5c8ff77e9 TUN-3008: Implement cloudflared tunnel cleanup command 2020-07-07 21:56:46 +08:00
Igor Postelnik 2a3d486126 TUN-3007: Implement named tunnel connection registration and unregistration.
Removed flag for using quick reconnect, this logic is now always enabled.
2020-07-01 04:19:30 +00:00
Adam Chalmers 4d3ebaf984 TUN-3106: Pass NamedTunnel config to StartServer 2020-06-17 23:20:37 +00:00
Adam Chalmers a1a8645294 TUN-3066: Command line action for tunnel run 2020-06-17 17:25:23 +00:00
Dalton 425554077f AUTH-2815 flag check was wrong. stupid oversight 2020-06-16 16:19:38 -05:00
Dalton 6e5ccd7c85 AUTH-2815 add the log file to support the config.yaml file
added small delay to handle the possiblity of the server not being started yet
2020-06-16 17:48:12 +00:00
Dalton 55acf7283c AUTH-2810 added warn for backwards compatibility sake 2020-06-12 22:15:28 +00:00
Dalton c716dd273c AUTH-2648 updated usage text 2020-06-11 11:08:05 -05:00
Dalton f8638839c0 AUTH-2729 added log file and level to cmd flags to match config file settings 2020-06-08 19:42:34 +00:00
Dalton e376a13025 AUTH-2645 protect against user mistaken flag input 2020-06-05 15:10:09 -05:00
cthuang fb82b2ced5 TUN-3019: Remove declarative tunnel entry code 2020-05-30 05:54:17 +08:00
Dalton 046be63253 AUTH-2596 added new logger package and replaced logrus 2020-05-27 17:07:19 -05:00
Igor Postelnik a908453aa4 TUN-2928, TUN-2929, TUN-2930: Add tunnel subcommands to interact with tunnel store service 2020-05-21 15:36:49 -05:00
Michael Borkenstein b89cc22896 AUTH-2369: RDP Bastion prototype 2020-05-19 21:10:50 -05:00
Michael Borkenstein 6a7418e1af AUTH-2686: Added error handling to tunnel subcommand 2020-05-18 15:36:25 -05:00
Dalton 8c870c19a6 AUTH-2505 added aliases 2020-05-13 15:15:08 -05:00
Igor Postelnik 8cc69f2a95 TUN-2860: Enable quick reconnect feature by default 2020-05-07 14:41:55 -05:00
cthuang c3fa4552aa TUN-2872: Exit with non-0 status code when the binary is updated so launchd will restart the service 2020-05-06 05:53:14 +08:00
Igor Postelnik dd0881f32b TUN-2940: Added delay parameter to stdin reconnect command. 2020-05-01 15:58:19 +00:00
Austin Cherry f18209af7d ARES-899: Fixes DoH client as system resolver. Fixes #91 2020-04-14 12:37:59 -05:00