f4ae8d1446
Add post-quantum flag to quick tunnel
...
Github #773
2022-10-05 01:33:17 +02:00
be0305ec58
TUN-6741: ICMP proxy tries to listen on specific IPv4 & IPv6 when possible
...
If it cannot determine the correct interface IP, it will fallback to all interfaces.
This commit also introduces the icmpv4-src and icmpv6-src flags
2022-09-26 11:37:08 +01:00
3d345d3748
TUN-6595: Enable datagramv2 and icmp proxy by default
2022-09-20 14:02:02 +00:00
11cbff4ff7
RTG-1339 Support post-quantum hybrid key exchange
...
Func spec: https://wiki.cfops.it/x/ZcBKHw
2022-09-07 19:32:53 +00:00
cfef0e737f
TUN-6720: Remove forcibly closing connection during reconnect signal
...
Previously allowing the reconnect signal forcibly close the connection
caused a race condition on which error was returned by the errgroup
in the tunnel connection. Allowing the signal to return and provide
a context cancel to the connection provides a safer shutdown of the
tunnel for this test-only scenario.
2022-08-31 21:50:02 +00:00
2a177e0fc4
TUN-6583: Remove legacy --ui flag
2022-07-20 16:17:29 -07:00
7607ead143
TUN-6503: Fix transport fallback from QUIC in face of dial error "no network activity"
2022-07-06 13:05:45 +01:00
ae7fbc14f3
TUN-6373: Add edge-ip-version to remotely pushed configuration
...
(cherry picked from commit 8e9091cc48
2022-06-23 16:55:03 +00:00
ee87c43eb9
Merge pull request #656 from nikr-canva/http2-origins
...
Add Http2Origin option to force HTTP/2 origin connections
2022-06-16 12:23:07 -05:00
b9453b84bb
Revert "TUN-6373: Add edge-ip-version to remotely pushed configuration"
...
This reverts commit 8e9091cc48
2022-06-14 16:07:37 -07:00
f2339a7244
TUN-6380: Enforce connect and keep-alive timeouts for TCP connections in both WARP routing and websocket based TCP proxy.
...
For WARP routing the defaults for these new settings are 5 seconds for connect timeout and 30 seconds for keep-alive timeout. These values can be configured either remotely or locally. Local config lives under "warp-routing" section in config.yaml.
For websocket-based proxy, the defaults come from originConfig settings (either global or per-service) and use the same defaults as HTTP proxying.
2022-06-14 21:36:40 +00:00
8e9091cc48
TUN-6373: Add edge-ip-version to remotely pushed configuration
2022-06-14 15:41:16 +00:00
e3aad7799e
TUN-6357: Add connector id to ready check endpoint
2022-06-08 17:35:23 +00:00
2b0d704777
TUN-6341: Fix default config value for edge-ip-version
2022-06-02 20:12:15 -07:00
ee80e55833
TUN-6339: Add config for IPv6 support
2022-06-02 16:04:26 -07:00
7d4afd4ae0
Add Http2Origin option to force HTTP/2 origin connections
...
If `http2Origin` is set, it will set `ForceAttemptHTTP2` in the transport config of the `OriginService`.
2022-06-01 12:57:29 +12:00
5e6f606f4e
TUN-6293: Update yaml v3 to latest hotfix
...
This addresses https://security.snyk.io/vuln/SNYK-GOLANG-GOPKGINYAMLV3-2841557
by updating yaml v3 to latest version.
It also stops using yaml v2 directly (we were using both v2 and v3 mixed).
We still rely on yaml v2 indirectly, via urfave cli, though.
Note that the security vulnerability does not affect v2.
2022-05-30 17:38:55 +00:00
99d4e48656
TUN-6016: Push local managed tunnels configuration to the edge
2022-05-06 15:43:24 +00:00
3254d08173
TUN-6014: Add remote config flag as default feature
2022-04-28 12:00:47 +01:00
7a6ab54fcb
TUN-6043: Allow UI-managed Tunnels to fallback from QUIC but warn about that
2022-04-12 09:46:07 +01:00
a0f6eb9d5e
TUN-5992: Use QUIC protocol for remotely managed tunnels when protocol is unspecified
2022-04-05 23:07:10 +01:00
c5d1662244
TUN-5960: Do not log the tunnel token or json credentials
2022-03-28 10:54:39 +01:00
98736a03e1
TUN-5915: New cloudflared command to allow to retrieve the token credentials for a Tunnel
2022-03-23 10:35:16 +00:00
470e6c35c5
TUN-5918: Clean up text in cloudflared tunnel --help
2022-03-22 18:52:28 +00:00
e2a8302bbc
TUN-5869: Add configuration endpoint in metrics server
2022-03-22 08:11:59 -07:00
057a0cc758
TUN-5833: Send feature `allow_remote_config` if Tunnel is run with --token
2022-03-16 14:07:03 +00:00
706523389c
TUN-5679: Add support for service install using Tunnel Token
2022-03-03 18:59:03 +00:00
a1d485eca5
TUN-5823: Warn about legacy flags that are ignored when ingress rules are used
2022-03-02 10:48:03 +00:00
b6d7076400
TUN-5681: Add support for running tunnel using Token
2022-02-23 10:09:45 +00:00
22cd8ceb8c
TUN-5682: Remove name field from credentials
2022-02-23 10:08:29 +00:00
9909e9d63c
TUN-5754: Allow ingress validate to take plaintext option
...
Ingress validate currently validates config from a file. This PR adds a
new --json/-j flag to provide the ingress/config data as a plaintext
command line argument.
2022-02-22 16:56:22 +00:00
d68ff390ca
TUN-5698: Make ingress rules and warp routing dynamically configurable
2022-02-16 09:38:28 +00:00
e22422aafb
TUN-5749: Refactor cloudflared to pave way for reconfigurable ingress
...
- Split origin into supervisor and proxy packages
- Create configManager to handle dynamic config
2022-02-14 15:37:09 +00:00
a84cbcde7e
TUN-5669: Change network command to vnet
2022-01-24 11:26:16 +00:00
1a92f1acfe
TUN-5477: Unhide vnet commands
2022-01-21 12:41:58 +00:00
a39d95d5f7
TUN-5551: Show whether the binary was built for FIPS compliance
...
This is shown in 3 ways:
- the version output with `cloudflared version` and alike commands
- the build_info prometheus metric
- a logging message
2021-12-28 19:03:16 +00:00
6822e4f8ab
TUN-5482: Refactor tunnelstore client related packages for more coherent package
2021-12-28 17:17:49 +00:00
70e675f42c
TUN-5551: Reintroduce FIPS compliance for linux amd64 now as separate binaries
...
This is a cherry-pick of 157f5d1412
2021-12-20 21:50:42 +00:00
571380b3f5
TUN-5362: Adjust route ip commands to be aware of virtual networks
2021-12-03 09:10:20 +00:00
eec6b87eea
TUN-5361: Commands for managing virtual networks
2021-12-03 08:48:52 +00:00
36479ef11f
Merge pull request #478 from echtish/secret-flag
...
Add flag to 'tunnel create' subcommand to specify a base64-encoded secret
2021-11-02 16:21:01 -05:00
958650be1f
TUN-5262: Improvements to `max-fetch-size` that allow to deal with large number of tunnels in account
...
* `max-fetch-size` can now be set up in the config YAML
* we no longer pass that to filter commands that filter by name
* flag changed to signed int since altsrc does not support UInt flags
* we now look up each non UUID (to convert it to a UUID) when needed, separately
2021-10-19 18:28:29 +01:00
eb51ff0a6d
TUN-5262: Allow to configure max fetch size for listing queries
...
This can be useful/important for accounts with many tunnels that exceed
the 1000 default page size.
There are various tunnel subcommands that use listing underneath, so we make
that flag a tunnel one, rather than adding it to each subcommand.
2021-10-18 11:07:02 +01:00
6cbf90883d
TUN-5255: Fix potential panic if Cloudflare API fails to respond to GetTunnel(id) during delete command
2021-10-14 15:18:34 +00:00
ceb509ee98
TUN-5138: Switch to QUIC on auto protocol based on threshold
2021-10-14 09:18:20 +01:00
2822fbe3db
TUN-5249: Revert "TUN-5138: Switch to QUIC on auto protocol based on threshold"
...
This reverts commit e445fd92f7
2021-10-13 19:06:31 +01:00
5148d00516
TUN-5246: Use protocol: quic for Quick tunnels if one is not already set
2021-10-13 08:04:21 +00:00
e445fd92f7
TUN-5138: Switch to QUIC on auto protocol based on threshold
2021-10-11 11:05:20 +00:00
1239006e96
Add flag to 'tunnel create' subcommand to specify a base64-encoded secret
2021-09-29 18:56:38 -05:00
cbdf88ea28
TUN-5164: Update README and clean up references to Argo Tunnel (using Cloudflare Tunnel instead)
2021-09-29 08:27:47 +00:00
f985ed567f
TUN-5128: Enforce maximum grace period
...
This maximum grace period will be honored by Cloudflare edge such that
either side will close the connection after unregistration at most
by this time (3min as of this commit):
- If the connection is unused, it is already closed as soon as possible.
- If the connection is still used, it is closed on the cloudflared configured grace-period.
Even if cloudflared does not close the connection by the grace-period time,
the edge will do so.
2021-09-21 16:48:37 +00:00
6968b714d0
Add support for taking named tunnel credentials from an environment variable
2021-09-13 13:51:37 -02:30
98c3957d30
TUN-5010: --region should be a string flag
2021-08-30 14:40:07 +00:00
27cd83c2d3
Revert "TUN-4926: Implement --region configuration option"
...
This reverts commit d0a1daac3b
2021-08-28 16:42:55 +01:00
d0a1daac3b
TUN-4926: Implement --region configuration option
2021-08-27 09:11:10 +00:00
2afa307765
TUN-4981: Improve readability of prepareTunnelConfig method
2021-08-26 18:15:36 +01:00
a4a9f45b0a
TUN-4821: Make quick tunnels the default in cloudflared
2021-08-26 15:53:02 +00:00
071d595371
TUN-4940: Fix cloudflared not picking up correct NextProtos for quic
2021-08-23 15:30:45 +00:00
12ad264eb3
TUN-4866: Add Control Stream for QUIC
...
This commit adds support to Register and Unregister Connections via RPC
on the QUIC transport protocol
2021-08-17 14:50:32 +00:00
8527d03a29
TUN-4847: Allow to list tunnels by prefix name or exclusion prefix name
2021-07-30 12:00:26 +01:00
aa24338225
TUN-4832: Prevent tunnel from running accidentally when only proxy-dns should run
2021-07-29 11:05:12 +00:00
0924549efd
TUN-4811: Publish quick tunnels' hostname in /metrics under `userHostname` for backwards-compatibility
2021-07-29 10:20:43 +01:00
ed1389ef08
TUN-4814: Revert "TUN-4699: Make quick tunnels the default in cloudflared"
...
This reverts commit 18992efa0c
2021-07-28 10:02:55 +01:00
18992efa0c
TUN-4699: Make quick tunnels the default in cloudflared
2021-07-26 15:57:36 +00:00
59cae0f622
TUN-4698: Add cloudflared metrics endpoint to serve quick tunnel hostname
2021-07-12 09:26:07 +00:00
3eb9efd9f0
TUN-4521: Modify cloudflared to use zoneless-tunnels-worker for free tunnels
2021-06-29 09:39:18 +01:00
f88732277a
TUN-4502: Make `cloudflared tunnel route` subcommands described consistently
2021-06-07 09:20:11 +01:00
235897ba21
AUTH-3426: Point to new transfer service URL and eliminate PUT /ok
2021-05-19 19:39:56 +00:00
4c5ebccacc
TUN-4425: --overwrite-dns flag for in adhoc and route dns cmds
2021-05-19 18:22:01 +00:00
6526211a69
TUN-4421: Named Tunnels will automatically select the protocol to connect to Cloudflare's edge network
2021-05-17 15:57:44 +01:00
ae460b340b
TUN-4342: Fix false positive warning about unused hostname property
2021-05-13 02:05:19 +01:00
4bd17766a9
TUN-4359: Warn about unused keys in 'tunnel ingress validate'
2021-05-13 02:05:19 +01:00
4d43a70a38
Setup a Github action for checking the cloudflared build
2021-05-04 14:31:22 +01:00
1073f8db40
TUN-2853: rename STDIN-CONTROL env var to STDIN_CONTROL
2021-04-09 16:43:01 +01:00
b25d38dd72
TUN-4177: Running with proxy-dns should not prevent running Named Tunnels
2021-04-05 11:28:05 +01:00
5afa3251dd
TUN-4150: Only show the connector table in 'tunnel info' if there are connectors. Don't show rows with zero connections.
2021-03-30 20:13:00 +00:00
ebf5292bf9
TUN-4146: Unhide and document grace-period
2021-03-29 16:29:18 -05:00
f9062ab473
TUN-4141: Better error messages for tunnel info subcommand.
2021-03-26 14:45:35 -05:00
da4d0b2bae
TUN-4067: Reformat code for consistent import order, grouping, and fix formatting. Added goimports target to the Makefile to make this easier in the future.
2021-03-24 10:53:29 -05:00
50435546c5
TUN-4118: Don't overwrite existing file with tunnel credentials. For ad-hoc tunnels, this means tunnel won't start if there's a file in the way.
2021-03-24 08:26:22 -05:00
9018ee5d5e
TUN-4116: Ingore credentials-file setting in configuration file during tunnel create and delete opeations.
...
This change has two parts:
1. Update to newer version of the urfave/cli fork that correctly sets flag value along the context hierarchy while respecting config file overide behavior of the most specific instance of the flag.
2. Redefine --credentials-file flag so that create and delete subcommand don't use value from the config file.
2021-03-24 08:15:36 -05:00
8250b67a9f
TUN-4111: Warn the user if both properties "tunnel" and "hostname" are used
2021-03-23 20:14:29 +00:00
4a7763e497
TUN-3998: Allow to cleanup the connections of a tunnel limited to a single client
2021-03-23 08:48:54 +00:00
89d0e45d62
TUN-3993: New `cloudflared tunnel info` to obtain details about the active connectors for a tunnel
2021-03-17 14:08:18 +00:00
a34099724e
TUN-4094: Don't read configuration file for access commands
2021-03-16 17:36:46 -05:00
8c5498fad1
TUN-3715: Only read config file once, right before invoking the command
2021-03-16 17:22:13 -05:00
2c746b3361
TUN-4081: Update log severities to use Zerolog's levels
2021-03-16 19:04:49 +00:00
aa5ebb817a
TUN-4075: Dedup test should not compare order of list
2021-03-10 13:48:59 -06:00
39065377b5
TUN-4063: Cleanup dependencies between packages.
...
- Move packages the provide generic functionality (such as config) from `cmd` subtree to top level.
- Remove all dependencies on `cmd` subtree from top level packages.
- Consolidate all code dealing with token generation and transfer to a single cohesive package.
2021-03-09 14:02:59 +00:00
ded9dec4f0
TUN-3819: Remove client-side check that deleted tunnels have no connections
2021-03-05 21:21:10 +00:00
4f88982584
TUN-3994: Log client_id when running a named tunnel
2021-03-03 17:27:23 +00:00
bcd71b56e9
TUN-3989: Check in with Updater service in more situations and convey messages to user
2021-03-03 13:57:04 +00:00
5c7b451e17
TUN-3995: Optional --features flag for tunnel run.
...
These features will be included in the ClientInfo.Features field when
running a named tunnel.
2021-03-02 16:21:17 -06:00
b73c039070
TUN-3988: Log why it cannot check if origin cert exists
2021-03-01 21:37:44 +00:00
f1ca2de515
TUN-3978: Unhide teamnet commands and improve their help
2021-03-01 11:59:46 +00:00
27507ab192
TUN-3970: Route ip show has alias route ip list
2021-02-26 17:15:43 +00:00
5ba3b3b309
TUN-3939: Add logging that shows that Warp-routing is enabled
2021-02-23 14:19:47 +00:00
6681d179dc
TUN-3809: Allow routes ip show to output as JSON or YAML
...
It also fixes the marshelling of CIDR into JSON since otherwise
it would show garbled characters as the mask.
2021-02-23 14:19:47 +00:00
2146f71b45
TUN-3753: Select http2 protocol when warp routing is enabled
2021-02-23 14:19:47 +00:00
b4700a52e3
TUN-3725: Warp-routing is independent of ingress
...
- Changed warp-routing configuration to its own yaml.
- Ingress Rules host matching is indepedent of warp-routing.
2021-02-23 14:19:47 +00:00
Bas Westerbaan
cthuang
Devin Carr
Nuno Diegues
Silver
Igor Postelnik
Niklas Rehfeld
João Oliveirinha
Sudarsan Reddy
Jeremy Teale
Riley Flynn
Rishabh Bector
Michael Borkenstein
Adam Chalmers