Commit Graph

294 Commits

Author SHA1 Message Date
Simon Ser e0bbafc253 output: replace wlr_output.damage with a damage event
This patch disambiguates the needs_frame event by uncoupling it from
damage. A new separate damage event is emitted when the backend damages
the output (this happens e.g. VT is changed or software cursors are
used). The event specifies the damaged region.

The wlr_output.damage field is removed. wlr_output is no longer
responsible for tracking its own damage, this is wlr_output_damage's
job.

This is a breaking change, but wlr_output_damage users shouldn't need an
update.

Bugs fixed:

- Screen flashes on VT switch
- Cursor damage issues on the X11 and headless backends

Closes: https://github.com/swaywm/sway/issues/5086
2020-03-12 22:47:59 +01:00
Simon Ser 07737e85cc output: add comment about needs_frame in wlr_output_schedule_frame
Add a comment to not forget why this call is necessary.

References: https://github.com/swaywm/wlroots/pull/2053
2020-03-12 15:01:09 +01:00
Simon Ser 7bce056f1d output: don't send a needs_frame event if already sent 2020-03-06 21:35:00 +01:00
Simon Ser a4c7c6db09 output: make wlr_output_schedule_frame set output->needs_frame
This way, wlr_output_schedule_frame will always be followed by a
wlr_output_commit. This forces the compositor to render an extra
frame before stopping the rendering loop.

To test, run wleird's frame-callback [1], make sure it's the only
visible client on the output and check the interval between frame
events is the output's refresh period instead of zero.

[1]: https://github.com/emersion/wleird/blob/master/frame-callback.c

Closes: https://github.com/swaywm/wlroots/issues/2051
2020-03-06 21:35:00 +01:00
Simon Ser 7017fa95b8 output: add adaptive_sync_enabled property 2020-03-06 21:32:58 +01:00
Simon Ser 348f52b5fc output: remove wlr_output_impl.schedule_frame
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.

There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.

However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:

- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
  screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen

With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.

This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.

References: https://github.com/swaywm/wlroots/issues/1925
2020-03-04 03:22:19 +01:00
Manuel Stoeckl 2fddec56e8 output: fix output transform compositions
This change ensures that wlr_output_transform_compose correctly composes
transforms when the first transform includes a rotation and the second
transform includes a flip.
2020-02-17 21:43:05 +01:00
Simon Ser e63b70263a output: don't destroy global immediately
Closes: https://github.com/swaywm/sway/issues/3625
2020-02-17 20:52:37 +01:00
Simon Ser ff29843d87 output: only advertise current mode
- Regular clients shouldn't care about modes
- Modes exposed are missing metadata such as aspect-ratio, interleaved, etc
- Modes exposed cannot be pruned [1]
- wlr-output-management provides a better API for privileged clients

[1]: https://gitlab.freedesktop.org/wayland/wayland/issues/92

Closes: https://github.com/swaywm/wlroots/issues/1099
2019-12-30 14:25:33 -07:00
Simon Ser 8fc16890c7 output: refuse to commit a buffer or modeset a disabled output
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30 11:21:11 -07:00
Simon Ser b5597f5b44 output: clear pending bit if pending == current
In case the pending value is the same as the current value, clear the
bit from pending.committed.
2019-12-30 11:21:11 -07:00
Simon Ser 5d1ba0f446 output: re-introduce atomic mode, enabled, scale and transform
This reverts commit 01f903874b and re-applies
commit ee5f98ad49.

Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue)
See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR)
See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-30 11:21:11 -07:00
Simon Ser 4da4a15d6b output: add description
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.

References: https://github.com/swaywm/wlroots/issues/1623
2019-12-29 12:35:22 -05:00
Simon Ser 98cd11c019 output: fix wlr_output_preferred_mode fallback
`mode` points to an invalid pointer (head of the list) when the loop
stops.

Closes: https://github.com/swaywm/sway/issues/4717
2019-12-16 01:24:28 +00:00
Manuel Stoeckl 8a5e4768e1 output: fix cursor wl_surface.{enter,leave} tracking
This change ensures that wl_surface.leave is sent when a surface
associated with the cursor is disassociated (when the cursor is
reset).
2019-12-09 15:58:18 +01:00
Simon Ser dc6ef658b6 Revert "output: add block_idle_frame"
This reverts commit cbb2781fed.

In [1], we found issues with block_idle_frame and replaced it with
frame_pending. block_idle_frame is now unused.

[1]: https://github.com/swaywm/sway/pull/4772
2019-12-01 10:25:34 -05:00
Simon Ser 3084cee7bc output: fix off-by-one wlr_output_event_present.commit_seq
Backends not supporting presentation feedback call
wlr_output_send_present with a NULL event in their commit handler. Since
the commit hasn't been applied yet, commit_seq still has its old value.
We need to increment it.

An alternative would be to move commit_seq in wlr_output_state. This
would allow to have a pending and a current commit_seq.
wlr_output_send_present could take the pending commit_seq when called
with a NULL event.
2019-11-21 11:03:43 -05:00
Simon Ser 2d9661f189 output: set wlr_output.commit_seq before firing the commit event
This allows listeners to read the commit sequence number.
2019-11-21 11:03:43 -05:00
Simon Ser 6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Andri Yngvason 5d8bd4d343 output: Add commit sequence number
This allows synchronisation between different instances of commit/precommit
callbacks.
2019-10-22 10:41:32 -04:00
Ivan Molodetskikh cbb2781fed output: add block_idle_frame 2019-10-16 09:35:07 -04:00
Rouven Czerwinski 01f903874b Revert "output: atomic mode"
This reverts commit ee5f98ad49.

This intoduced problems where outputs could not be turned off because
they had flips pending.
2019-08-07 16:22:11 +09:00
Simon Ser ee5f98ad49 output: atomic mode, enabled, scale and transform
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.

Compositors now need to call wlr_output_commit after setting any of those
properties.

Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.

Updates: https://github.com/swaywm/wlroots/issues/1640
2019-08-02 10:01:29 -04:00
Simon Ser ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Simon Ser 76ef089f52 output: drop wlr_output_mode.flags
AFAIK this was always set to zero. Instead, compute wl_output mode flags on the
fly.

Technically this is a breaking change, but I don't think anybody uses this
field.
2019-07-21 12:33:32 -04:00
Simon Ser ce3f4c3fe1 output: remove wlr_output_impl.transform
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.

We could add support for hardware transforms, but:

- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
  limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])

This belongs to a different patch series anyway.

[1]: https://patchwork.freedesktop.org/series/52324/
2019-06-16 10:51:49 -04:00
Simon Ser 33127c545b output: reset the pending state on failed commit
It can be surprising for callers to stash pending changes, commit, get a
failure, then set some other pending changes, commit again, and get another
failure because of the previously-pending changes.

Instead, make commit reset the pending state on failure.
2019-06-16 10:51:49 -04:00
Simon Ser 6c659da98b output: introduce wlr_output_lock_attach_render
This allows screen shooters and screen grabbers to ensure rendering will be
used instead of direct scan-out.
2019-06-07 09:06:11 -04:00
Simon Ser e554c593f9 output: refuse to scan-out if software cursors are used 2019-06-07 09:06:11 -04:00
Simon Ser ff6b352d75 output: save buffer in pending state 2019-06-07 09:06:11 -04:00
Simon Ser afe7b207d5 output: fix attach_buffer semantics 2019-06-07 09:06:11 -04:00
Simon Ser 1d222309b8 output: change set_dmabuf to attach_buffer 2019-06-07 09:06:11 -04:00
emersion 96d6fde5dc backend/drm: add basic support for direct scan-out 2019-06-07 09:06:11 -04:00
Rouven Czerwinski a5e32f652b wlr_output: remove idle_done on output destroy
If an output is destroyed while an idle_done event is scheduled, it
results in the following Address Sanitizer Output:

==1469==ERROR: AddressSanitizer: heap-use-after-free on address 0x6170000bb668 at pc 0x7f49aaa0c348 bp 0x7ffed5da35b0 sp 0x7ffed5da35a0
WRITE of size 8 at 0x6170000bb668 thread T0
    #0 0x7f49aaa0c347 in schedule_done_handle_idle_timer ../subprojects/wlroots/types/wlr_output.c:265
    #1 0x7f49aa2f875b in wl_event_loop_dispatch_idle (/usr/lib/libwayland-server.so.0+0xa75b)
    #2 0x7f49aa2f8815 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa815)
    #3 0x7f49aa2f739b in wl_display_run (/usr/lib/libwayland-server.so.0+0x939b)
    #4 0x556622dadd51 in server_run ../sway/server.c:216
    #5 0x556622dac25d in main ../sway/main.c:397
    #6 0x7f49aa0d0ce2 in __libc_start_main (/usr/lib/libc.so.6+0x23ce2)
    #7 0x556622d8d09d in _start (/usr/local/bin/sway+0x3909d)

0x6170000bb668 is located 488 bytes inside of 672-byte region [0x6170000bb480,0x6170000bb720)
freed by thread T0 here:
    #0 0x7f49aabc8f89 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:66
    #1 0x7f49aa968fc2 in drm_connector_destroy ../subprojects/wlroots/backend/drm/drm.c:829
    #2 0x7f49aaa0cc52 in wlr_output_destroy ../subprojects/wlroots/types/wlr_output.c:357
    #3 0x7f49aa96d2e9 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1265
    #4 0x7f49aa961a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
    #5 0x7f49aaa2e1e9 in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #6 0x7f49aa98319f in udev_event ../subprojects/wlroots/backend/session/session.c:52
    #7 0x7f49aa2f87f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)

previously allocated by thread T0 here:
    #0 0x7f49aabc95a1 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:95
    #1 0x7f49aa96b7a2 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1114
    #2 0x7f49aa961a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
    #3 0x7f49aaa2e1e9 in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #4 0x7f49aa98319f in udev_event ../subprojects/wlroots/backend/session/session.c:52
    #5 0x7f49aa2f87f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)

SUMMARY: AddressSanitizer: heap-use-after-free ../subprojects/wlroots/types/wlr_output.c:265 in schedule_done_handle_idle_timer
Shadow bytes around the buggy address:
  0x0c2e8000f670: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
  0x0c2e8000f680: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
  0x0c2e8000f690: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c2e8000f6a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c2e8000f6b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
=>0x0c2e8000f6c0: fd fd fd fd fd fd fd fd fd fd fd fd fd[fd]fd fd
  0x0c2e8000f6d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c2e8000f6e0: fd fd fd fd fa fa fa fa fa fa fa fa fa fa fa fa
  0x0c2e8000f6f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
  0x0c2e8000f700: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
  0x0c2e8000f710: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
  Addressable:           00
  Partially addressable: 01 02 03 04 05 06 07
  Heap left redzone:       fa
  Freed heap region:       fd
  Stack left redzone:      f1
  Stack mid redzone:       f2
  Stack right redzone:     f3
  Stack after return:      f5
  Stack use after scope:   f8
  Global redzone:          f9
  Global init order:       f6
  Poisoned by user:        f7
  Container overflow:      fc
  Array cookie:            ac
  Intra object redzone:    bb
  ASan internal:           fe
  Left alloca redzone:     ca
  Right alloca redzone:    cb

Remove the idle_done idle timer when the output is destroyed
2019-05-30 09:14:46 +03:00
Ilia Bozhinov 03346cb28f output: clear output->damage on successful commit 2019-05-13 18:45:22 +03:00
Simon Ser bde5a1f4ea output: introduce wlr_output_schedule_done
This commit introduces wlr_output_schedule_done and refactors the mechanism
used to send wl_output events to clients.

wlr_output_schedule_done schedules a wl_output.done event. This allows clients
to see wlr_output property changes as atomic.

This function is also useful for add-on interfaces like xdg_output which need
to trigger a wl_output.done event to apply their new state.
2019-04-27 10:02:21 -06:00
Simon Ser 20690346c7 output: rename needs_commit to needs_frame
This new name makes more sense, since it is a request from the backend to get
a new frame. In the future a commit may not convey a new frame.
2019-04-23 14:34:30 -06:00
Simon Ser 5e6766a165 output-damage: refactor API
wlr_output_damage_make_current has been renamed to
wlr_output_damage_attach_render, since it's just a wrapper for
wlr_output_attach_render.

wlr_output_damage_swap_buffers has been removed completely. Instead,
wlr_output_damage now listens to successful wlr_output commits and updates its
internal state accordingly.
2019-04-23 14:34:30 -06:00
Simon Ser 31dcecbfa9 output: rename swap_buffers event to precommit
Also remove damage from the event data since it's no longer tied to commits.
2019-04-23 14:34:30 -06:00
Simon Ser 9a0f8a194c output: refactor backend API
This updates the backend part of the output API. This is mostly renaming:
make_current becomes attach_render and swap_buffers becomes commit.

This also fixes the RDP backend to support NULL damage.
2019-04-23 14:34:30 -06:00
Simon Ser 23e37e7b1d output: refactor frame submission API
This is necessary for direct scan-out and other upcoming features. This patch
changes the output API to look like the wl_surface API.

Outputs now have some double-buffered state: the frame to be submitted
(currently only wlr_renderer frames are supported) and the damaged region.
To attach a pending frame, use wlr_output_attach_render. To set the pending
damaged region, use wlr_output_set_damage.

To submit the pending state, call wlr_output_commit. This will submit the
pending frame to the backend.

To migrate from the old API to the new one:

- Replace wlr_output_make_current calls by wlr_output_attach_render
- Replace wlr_output_swap_buffers calls by wlr_output_set_damage and
  wlr_output_commit
2019-04-23 14:34:30 -06:00
Simon Ser 8acbf449cc output: introduce wlr_output_preferred_mode 2019-04-22 11:15:38 -06:00
Ilia Bozhinov dc5d1d08ef output: do nothing in output_set_image if backend has no renderer
This is useful when using the noop backend for example.
2019-04-14 19:35:23 +03:00
emersion 1515c56cae output: remove lx, ly
Fixes https://github.com/swaywm/wlroots/issues/1610
2019-04-13 08:31:30 -06:00
Brian Ashworth 3c9f791d0e wlr_output: do not modeset to current mode
There is no point in modesetting an output to a mode that it is already
set to. Modesetting will cause the output to briefly flicker which is
undesirable for a noop. This prevents modesetting any wlr_output,
regardless of the backend, to it's currently set mode.
2019-02-17 00:12:59 +01:00
Geoff Greer 5c8d2da0a1 Add a wlr_output_set_subpixel()
drmModeConnector.subpixel doesn't seem to detect subpixel order on many displays (especially laptops). Allow subpixel order to be manually set.

The corresponding PR for sway adds a subpixel output option: https://github.com/swaywm/sway/pull/3645

Once both are merged, https://github.com/swaywm/sway/issues/3163 will be fixed.
2019-02-13 19:20:29 +01:00
emersion d4ffa5b7a6
backend/drm: fix state for outputs loosing their CRTC
When there aren't enough CRTCs for all outputs, we try to move a CRTC from a
disabled output to an enabled one. When this happens, the old output's state
wasn't changed, so the compositor thought it was still enabled and rendering.

This commit marks the old output as WLR_DRM_CONN_NEEDS_MODESET and sets its
current mode to NULL.
2019-01-19 10:18:03 +01:00
Timidger 9af0c5338f
Standardize the wlr_box input paramaters
Fixes #1094
2018-12-21 13:56:10 -05:00
emersion 6aaefad40d
output: switch swap_buffers damage to output-buffer-local coords
This is one more step towards [1]. This gives more freedom to the compositor
wrt. how it handles damage.

[1]: https://github.com/swaywm/wlroots/issues/1363
2018-12-01 10:56:35 +01:00
Ilia Bozhinov fb5691b6cc output: add wlr_output_preferred_read_format()
The read format is dependent on the output, so we first need to make it
current. This fixes a race condition in wlr-screencopy-v1 where a dmabuf
client would cause EGL_NO_SURFACE to be bound at the time when
screencopy needs to query for the preferred format, causing GL errors.
2018-11-24 10:54:25 +01:00