Commit Graph

201 Commits

Author SHA1 Message Date
emersion cdd55b5d19
Merge remote-tracking branch 'upstream/master' into output-damage 2018-02-09 14:50:26 +01:00
Markus Ongyerth 08fda567d2 prevents reuse of outdated wlr_output state
On the drm output the wlr_drm_connector structs are reused.
This struct contains the wlr_output struct, which is reused as well.
The old code kept modes/edid and output state persistent over hotplug.
This nulls the relevant strings, reads newer edid data and removes old
modes on unplug.
2018-02-06 22:45:37 +01:00
emersion 3d3ea32137
Merge remote-tracking branch 'upstream/master' into output-damage 2018-02-03 00:15:44 +01:00
emersion bb39277e97
backend/drm: update output enabled property on modeset 2018-02-02 22:28:08 +01:00
emersion bb4aeb3b2f
backend/drm: support updating cursor when session is paused 2018-02-02 21:01:59 +01:00
emersion babdd6ccf7
backend: fix use-after-free when destroying backends
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.

The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
2018-01-30 19:45:57 +01:00
Guido Günther c5aac77692 Fix some typos
Prefer initialize over initialise since used more often in the sources.
2018-01-30 16:10:07 +01:00
emersion f152fdb4c5
Merge pull request #594 from Ongy/drm-surface-buffers
relases gbm buffers on init
2018-01-30 11:04:01 +01:00
emersion d498855b9d
backend/drm: fix hw cursor position on rotated and scaled outputs
output: add wlr_output_transformed_resolution
2018-01-30 10:23:35 +01:00
emersion 51c22d39a4
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-29 23:24:09 +01:00
Tony Crisci ed5b1fdedd
Merge pull request #580 from emersion/screenshooter-renderer-backport
Backport screenshooter fixes from the renderer redesign v1
2018-01-29 17:13:23 -05:00
Markus Ongyerth cde0f454b3 Clean up the gbm/egl as well 2018-01-29 11:49:31 +01:00
Markus Ongyerth 2cdb646531 relases gbm buffers on init
The wlr_drm_surface_init function is called (upon others) when the drm
mode is changed.
When the surface was used previously this replaced the gbm_surface, but
did not replace the gbm buffers (front/back).
With this, wlr_drm_surface_get_from never set up the new buffers with
the new glViewport because surf->front existed.

This frees the buffers to get new buffers on the new surface with the
new viewport.
2018-01-29 11:29:54 +01:00
emersion b47e8c4a1d
backend/drm: do not retry pageflip when swapping buffers 2018-01-28 23:33:38 +01:00
emersion 20e6861021
Do not flush damage if swapping buffers failed
This should solve issues with multiple outputs on DRM backend.
2018-01-28 22:39:24 +01:00
emersion 1ee61dbd0f
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-28 21:22:50 +01:00
Guido Günther d7dfbd23fa drm: Use ptrdiff_t instead of intmax_t in format string
since we're looking at pointer differences.

Otherwise the build fails on arm like

In file included from ../backend/drm/drm.c:19:0:
../include/wlr/util/log.h:34:17: error: format '%jd' expects argument of type 'intmax_t', but argument 7 has type 'int' [-Werror=format=]
  _wlr_log(verb, "[%s:%d] " fmt, _strip_path(__FILE__), __LINE__, ##__VA_ARGS__)
                 ^
../backend/drm/drm.c:462:2: note: in expansion of macro 'wlr_log'
  wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
  ^~~~~~~
../backend/drm/drm.c:462:39: note: format string is defined here
  wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
                                     ~~^
                                     %d
2018-01-27 12:29:56 +01:00
emersion 7adf13e284
Fix flickering when switching VT 2018-01-27 11:16:42 +01:00
emersion 8d58ed502b
output: add wlr_output_schedule_frame 2018-01-26 22:39:23 +01:00
emersion ece2c1e4e2
Damage tracking for transformed outputs 2018-01-26 22:11:09 +01:00
Vincent Vanlaer 72507f9820 Clean up session signal handler on drm init fail 2018-01-24 18:27:53 +01:00
emersion 4fa90b0511
Backport screenshooter fixes from the renderer redesign v1
This backports some changes to #319 to fix the screenshooter data
format. This also adds wlr_backend_get_renderer which will be
useful to support multiple renderers.
2018-01-23 22:06:54 +01:00
emersion 59c53e8333
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-21 22:18:06 +01:00
Timidger f8b9f44ff5
Add con/crtc null check to move_cursor in drm 2018-01-21 15:47:02 -05:00
Timidger 9d4ea146b6
Added crtc null check for other drm funcs 2018-01-21 15:37:23 -05:00
Timidger 4478cf1ddc
Fixes #575 2018-01-21 14:57:24 -05:00
emersion 0365b587f0
output: add damage tracking via buffer age 2018-01-21 00:06:35 +01:00
emersion 4ca38b84ed
backend/drm: fix hardware cursors not moving
This adds back `wlr_output::needs_swap`. This allows a backend to
request buffer swaps even if the output isn't damaged. This is
needed by the DRM backend to trigger pageflips when the cursor
moves.
2018-01-20 16:43:14 +01:00
emersion 584f06ad2f
backend/drm: do not try a pageflip is another one is in pending 2018-01-19 23:46:40 +01:00
emersion f0f97280a0
backend/drm: fix retry pageflip 2018-01-19 23:35:23 +01:00
Drew DeVault b331c5c2c5
Merge pull request #549 from emersion/output-enabled
Add wlr_output::enabled
2018-01-15 20:53:13 -05:00
emersion 0eebaf98d0
drm: do not pageflip when enabling output 2018-01-15 21:49:37 +01:00
Guido Günther 3101c300b1 Don't crash if crtc->cursor is NULL
Same as what atomic_crtc_set_cursor does

 Core was generated by `_build/rootston/rootston'.
 Program terminated with signal SIGSEGV, Segmentation fault.
 0  0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
 170		if (!crtc || !crtc->cursor) {
 (gdb) bt
 0  0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
 1  0xb6f2a856 in wlr_drm_connector_move_cursor (output=0x2242b28, x=0, y=0) at ../backend/drm/drm.c:634
 2  0xb6f3cea0 in wlr_output_cursor_set_image (cursor=0x21a0338, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4) at ../types/wlr_output.c:516
 3  0xb6f39da2 in wlr_cursor_set_image (cur=0x22cfc90, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4, scale=1) at ../types/wlr_cursor.c:310
 4  0xb6f44d2a in wlr_xcursor_manager_set_cursor_image (manager=0x22cfd10, name=0x434420 "left_ptr", cursor=0x22cfc90) at ../types/wlr_xcursor_manager.c:80
 5  0x00431c0a in roots_seat_configure_xcursor (seat=0x22cef08) at ../rootston/seat.c:515
 6  0x0043137c in roots_seat_init_cursor (seat=0x22cef08) at ../rootston/seat.c:210
 7  0x004315ec in roots_seat_create (input=0x218d220, name=0x434594 "seat0") at ../rootston/seat.c:289
 8  0x0042ecba in input_get_seat (input=0x218d220, name=0x434594 "seat0") at ../rootston/input.c:39
 9  0x0042ed04 in input_add_notify (listener=0x218d228, data=0x218d3b0) at ../rootston/input.c:54
 10 0xb6f2f2e6 in wl_signal_emit (signal=0x1ea548c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
 11 0xb6f2f572 in input_add_reemit (listener=0x1ea9990, data=0x218d3b0) at ../backend/multi/backend.c:101
 12 0xb6f2db7e in wl_signal_emit (signal=0x1ea992c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
 13 0xb6f2ddaa in handle_device_added (backend=0x1ea9920, libinput_dev=0x2292598) at ../backend/libinput/events.c:87
 14 0xb6f2e164 in wlr_libinput_event (backend=0x1ea9920, event=0x2292b78) at ../backend/libinput/events.c:198
 15 0xb6f2d678 in wlr_libinput_readable (fd=23, mask=1, _backend=0x1ea9920) at ../backend/libinput/backend.c:28
 16 0xb6f2d7c0 in wlr_libinput_backend_start (_backend=0x1ea9920) at ../backend/libinput/backend.c:74
 17 0xb6f27170 in wlr_backend_start (backend=0x1ea9920) at ../backend/backend.c:30
 18 0xb6f2f320 in multi_backend_start (wlr_backend=0x1ea5480) at ../backend/multi/backend.c:22
 19 0xb6f27170 in wlr_backend_start (backend=0x1ea5480) at ../backend/backend.c:30
 20 0x0042fbc6 in main (argc=1, argv=0xbe89dd04) at ../rootston/main.c:60
2018-01-15 13:37:53 +01:00
emersion 53ba9b4eec
Fix output enable in DRM backend 2018-01-07 00:28:21 +01:00
emersion 771263380c
Add wlr_output::enabled 2018-01-04 12:46:15 +01:00
Dominique Martinet 8e24aaa3c6 style: fix sizeof() calls without parentheses 2017-12-28 16:28:19 +01:00
emersion e737f65e38
Fix cursor on transformed output with DRM backend 2017-12-26 18:16:37 +01:00
Tony Crisci a937016e38 remove session from multibackend 2017-12-19 18:25:46 -05:00
Dominique Martinet be95147385 drm backend: add wlr_output_is_drm 2017-12-19 20:13:49 +01:00
emersion b99d1f4fcc
Refactor wlr_egl_init to accept config_attribs 2017-12-17 23:51:04 +01:00
emersion 0256de0002
Add full refresh rate support to custom modes 2017-12-17 18:02:55 +01:00
Drew DeVault 23fb663ea4
Merge pull request #453 from emersion/surface-transform
Add surface transforms support
2017-12-14 14:43:04 -05:00
emersion 466e86b7b2
Merge branch 'master' into surface-transform 2017-12-14 20:31:18 +01:00
emersion 75ef7860bb
Merge branch 'master' into display-destroy 2017-12-14 20:29:30 +01:00
emersion 3b4b8953d9
Update output layout when scale or transform changes 2017-12-12 21:58:00 +01:00
emersion c67a5824b8
Merge branch 'master' into display-destroy 2017-12-11 16:14:03 +01:00
emersion 18eb1eee3f
Listen to display destroy in xwayland, rename wlr_egl_free 2017-12-08 00:59:37 +01:00
emersion 9d43adaafa
Listen to display destroy in backends 2017-12-07 23:44:59 +01:00
emersion 91d72040e5
Configure outputs with make, model, serial in rootston
Added fallbacks in DRM backend in case EDID extension data for model and serial is missing.

Updates #403
2017-12-07 13:59:19 +01:00
emersion 8af779fae6
Fix segfault when moving hardware cursor 2017-12-05 22:23:01 +01:00