Commit Graph

235 Commits

Author SHA1 Message Date
emersion 3bda7e2ef8
Use DRM_FORMAT_MOD_LINEAR instead of a hardcoded constant 2018-03-26 12:00:08 -04:00
emersion c63d94483b
Redesign wlr_texture
- Textures are now immutable (apart from those created from raw
  pixels), no more invalid textures
- Move all wl_drm stuff in wlr_renderer
- Most of wlr_texture fields are now private
- Remove some duplicated DMA-BUF code in the DRM backend
- Add more assertions
- Stride is now always given as bytes rather than pixels
- Drop wl_shm functions

Fun fact: this patch has been written 10,000 meters up in the air.
2018-03-24 23:48:32 -04:00
emersion a854c2f246
Merge branch 'master' into gles2-renderer-redesign 2018-03-23 00:55:55 +01:00
emersion 60bfe0a6aa
backend/drm: remove remaining raw GL call
This makes the hardware cursor code a less efficient. Can be
fixed with a GLES3 renderer.
2018-03-21 11:34:08 +01:00
emersion b1f93bc5cc
render/egl: use EGL_KHR_debug 2018-03-21 10:42:43 +01:00
emersion 3581573bdc
render/gles2: make wlr_renderer_begin take viewport size
This allows raw GL calls outside wlr_renderer to be removed.
2018-03-21 07:37:09 +01:00
emersion c41de2d1be
render: split render.h into wlr_renderer.h and wlr_texture.h 2018-03-19 23:16:29 +01:00
emersion 6227da96b1
backend/drm: don't hardcode matrix 2018-03-18 11:34:23 +01:00
emersion 7894fca224
matrix: rename wlr_matrix_texture to wlr_matrix_projection 2018-03-15 21:26:45 +01:00
emersion 876f07e9f1
renderer: replace wlr_texture_get_matrix by wlr_render_texture 2018-03-15 19:31:02 +01:00
emersion 824a95ad19
matrix: use 2D matrices 2018-03-15 15:33:58 +01:00
emersion d26b67cb06
matrix: unify API, don't use array pointers 2018-03-15 11:10:56 +01:00
emersion b6a3f240c7
matrix: move to types/ 2018-03-15 09:11:27 +01:00
emersion d24f868bbe
backend/drm: fix cursor hotspot not updated 2018-03-12 19:34:43 +01:00
emersion 92ca4ad474
backend/drm: refactor wlr_drm_connector_set_cursor 2018-03-11 11:40:03 +01:00
Markus Ongyerth 2cea430488 prevent current_mode null on output_enable(false)
The current mode was set to NULL to abuse it as state variable
persisting DRM suspend/resume, this results resulted in a segfault on
normal DPMS cycle.

This reverts that change and uses the wlr_output enabled variable, which
also persists and makes more sense.
2018-03-01 15:48:25 +01:00
Markus Ongyerth a65ef8ea86 restore dpms state on drm resume
If there is no current mode, set outputs to dpms off in drm resume.
Sets current mode to null on disable to ensure this can be checked.
2018-02-26 18:12:51 +01:00
Guido Günther d08792bfff Add alpha to wlr_render_with_matrix
so we can use the alpha channel to e.g. blend in textures
2018-02-25 13:47:48 +01:00
Drew DeVault 1d9be89e2d
Revert "ELF Visibility" 2018-02-19 18:01:27 -05:00
Scott Anderson 86269052eb Explicitly export EFL symbols 2018-02-19 14:26:40 +13:00
emersion c2e1474010
Reformat all #include directives 2018-02-12 21:29:23 +01:00
emersion 36ead80cd1
Make wlr_signal_emit_safe private 2018-02-12 19:52:47 +01:00
emersion 10ecf871f2
Remove wlr_backend.events.{output_remove,device_remove} 2018-02-12 10:36:43 +01:00
emersion 5e58d46cc1
Add wlr_signal_emit_safe 2018-02-12 09:12:31 +01:00
Drew DeVault 664d7bfe4e
Merge pull request #618 from VincentVanlaer/atomic-gamma
Add atomic gamma control
2018-02-10 09:51:09 -05:00
Vincent Vanlaer 7cb828ac70 Fallback gamma on legacy if properties don't exist 2018-02-10 10:24:49 +01:00
emersion bf6d245400
Swap buffers with damage 2018-02-09 22:54:14 +01:00
Vincent Vanlaer dd69d7b764 Use VLA instead of heap alloc 2018-02-09 19:37:01 +01:00
Vincent Vanlaer 0232269a2d Fix style 2018-02-09 19:35:44 +01:00
Vincent Vanlaer b2f6941617 Free gamma when property blob creation fails 2018-02-09 18:54:56 +01:00
Vincent Vanlaer 2df97ed16a Set needs_swap on output when gamma changes 2018-02-09 17:29:14 +01:00
Vincent Vanlaer f5e5d1983b Do not allow gamma control without a crtc 2018-02-09 17:29:14 +01:00
Vincent Vanlaer ab011406ad Add atomic gamma lut size fetching
Legacy gamma lut size now uses the new legacy_crtc member of
wlr_drm_crtc. This was Previously doen using old_crtc in
wlr_drm_connector, but since this refers to the crtc that was connected to
the ouput, this could give the wrong result.
2018-02-09 17:29:14 +01:00
Vincent Vanlaer cc1229e75e Add atomic gamma setting 2018-02-09 17:29:04 +01:00
emersion cdd55b5d19
Merge remote-tracking branch 'upstream/master' into output-damage 2018-02-09 14:50:26 +01:00
Markus Ongyerth 08fda567d2 prevents reuse of outdated wlr_output state
On the drm output the wlr_drm_connector structs are reused.
This struct contains the wlr_output struct, which is reused as well.
The old code kept modes/edid and output state persistent over hotplug.
This nulls the relevant strings, reads newer edid data and removes old
modes on unplug.
2018-02-06 22:45:37 +01:00
emersion 3d3ea32137
Merge remote-tracking branch 'upstream/master' into output-damage 2018-02-03 00:15:44 +01:00
emersion bb39277e97
backend/drm: update output enabled property on modeset 2018-02-02 22:28:08 +01:00
emersion bb4aeb3b2f
backend/drm: support updating cursor when session is paused 2018-02-02 21:01:59 +01:00
emersion babdd6ccf7
backend: fix use-after-free when destroying backends
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.

The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
2018-01-30 19:45:57 +01:00
Guido Günther c5aac77692 Fix some typos
Prefer initialize over initialise since used more often in the sources.
2018-01-30 16:10:07 +01:00
emersion f152fdb4c5
Merge pull request #594 from Ongy/drm-surface-buffers
relases gbm buffers on init
2018-01-30 11:04:01 +01:00
emersion d498855b9d
backend/drm: fix hw cursor position on rotated and scaled outputs
output: add wlr_output_transformed_resolution
2018-01-30 10:23:35 +01:00
emersion 51c22d39a4
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-29 23:24:09 +01:00
Tony Crisci ed5b1fdedd
Merge pull request #580 from emersion/screenshooter-renderer-backport
Backport screenshooter fixes from the renderer redesign v1
2018-01-29 17:13:23 -05:00
Markus Ongyerth cde0f454b3 Clean up the gbm/egl as well 2018-01-29 11:49:31 +01:00
Markus Ongyerth 2cdb646531 relases gbm buffers on init
The wlr_drm_surface_init function is called (upon others) when the drm
mode is changed.
When the surface was used previously this replaced the gbm_surface, but
did not replace the gbm buffers (front/back).
With this, wlr_drm_surface_get_from never set up the new buffers with
the new glViewport because surf->front existed.

This frees the buffers to get new buffers on the new surface with the
new viewport.
2018-01-29 11:29:54 +01:00
emersion b47e8c4a1d
backend/drm: do not retry pageflip when swapping buffers 2018-01-28 23:33:38 +01:00
emersion 20e6861021
Do not flush damage if swapping buffers failed
This should solve issues with multiple outputs on DRM backend.
2018-01-28 22:39:24 +01:00
emersion 1ee61dbd0f
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-28 21:22:50 +01:00