Commit Graph

919 Commits

Author SHA1 Message Date
Simon Ser 8f28f5b2f8 backend/drm: fix black screens when enabling output
This patch fixes this failure:

    01:57:16.642 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
    01:57:16.684 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
    01:57:16.684 [ERROR] [backend/drm/drm.c:732] Failed to initialize renderer on connector 'eDP-1': initial page-flip failed
    01:57:16.684 [ERROR] [backend/drm/drm.c:805] Failed to initialize renderer for plane
    01:57:16.684 [sway/config/output.c:423] Failed to commit output eDP-1

References: https://github.com/swaywm/sway/issues/5101
2020-06-03 10:27:21 -06:00
Simon Ser 019fe8bb7e backend/wayland: fix spurious eglSwapBuffers failures
This was introduced in [1]. However after reverting that PR I still
can't reproduce the bug the PR aimed to fix [2].

Since there's no good explanation why we would need to swap buffers
before resizing, let's just revert the PR.

[1]: https://github.com/swaywm/wlroots/pull/1486
[2]: https://github.com/swaywm/wlroots/issues/1371

Closes: https://github.com/swaywm/wlroots/issues/1768
2020-06-02 14:14:08 -06:00
Tudor Brindus 47a30957d1 backend/wayland: scale tablet tool position into [0, 1] range
Fixes #2233.
2020-06-01 22:36:46 +02:00
Simon Ser b03eebf7d4 backend/drm: always perform a CRTC commit in drm_connector_commit
When the mode, status or buffer hasn't changed, drm_connector_commit was
a no-op. Because of this individual changes to the gamma LUT or adaptive
sync status were ignored (if committed without a buffer).

Instead, perform a commit to apply the changes.
2020-06-01 11:45:11 -06:00
Simon Ser 1a2e82e327 backend/drm: drop extra wlr_output_update_enabled call
drm_connector_set_mode already takes care of keeping this up-to-date.
2020-06-01 11:45:11 -06:00
Simon Ser 80467f6ae8 backend/drm: commit/rollback FBs in drm_crtc_commit
We need to perform the FB bookkeeping on all commits, not just on
page-flips.
2020-06-01 11:45:11 -06:00
Simon Ser 70f3a0bb27 backend/drm: make adaptive_sync atomic
Stop using drmModeObjectSetProperty, set the property in the crtc_commit
function instead.
2020-06-01 11:45:11 -06:00
Simon Ser 42126c2022 backend/drm: rollback pending CRTC state on test commit
A test commit doesn't apply the pending state.

The CRTC state will be populated again if the compositor decides to
perform a regular commit afterwards.
2020-06-01 11:45:11 -06:00
Simon Ser 1a23c1425f Add comments for missing tablet tool entries
And stop using default cases, so that we know which parts of the code
need an update when adding a new enum entry.

Closes: https://github.com/swaywm/wlroots/issues/2208
2020-05-28 15:13:05 +02:00
Simon Ser d66b9966e9 backend/drm: fix missing crtc->cursor NULL check
Fixes: cdb6fdbc6c ("backend/drm: remove missing cursor plane workaround")
2020-05-27 21:01:20 +02:00
Simon Ser e7a8ea84c3 backend/drm: don't set cursor if off-screen
Closes: https://github.com/swaywm/wlroots/issues/2216
2020-05-27 21:01:20 +02:00
Simon Ser 15d8f1806e backend/drm: introduce pending and current CRTC state
Previously, we only had the pending state (crtc->pending, crtc->mode and
crtc->active). This causes issues when a commit fails: the pending state
is left as-is, and the next commit may read stale data from it.

This will also cause issues when implementing test-only commits: we need
to rollback the pending CRTC state after a test-only commit.

Introduce separate pending and current CRTC states. Properly update the
current state after a commit.
2020-05-26 23:34:37 +02:00
Simon Ser d6cc718472 backend/drm: nuke retry_pageflip
retry_pageflip is now dead code, since drm_connector_start_renderer
isn't called anymore. It was previously called when enabling an output.
The name "retry_pageflip" was a little confusing because the function
retried a modeset and the timer wasn't set up while performing a simple
page-flip.

Let's just remove this altogether for now. We can discuss whether it's
worth it to bring it back. Should we only do it on failed page-flips?
Should we only do it on EBUSY?
2020-05-26 23:34:37 +02:00
Simon Ser 61095f4a12 backend/drm: make drm_connector_set_mode take a wlr_drm_connector
Since this is an internal DRM backend function, there's no reason we
need to take a generic wlr_output.
2020-05-26 23:34:37 +02:00
Simon Ser 445750aa9a backend/drm: remove enable_drm_connector
Merge enable_drm_connector into drm_connector_set_mode. This allows us
to de-duplicate logic since enabling an output performs a modeset.
2020-05-26 23:34:37 +02:00
Simon Ser c02e9c2bb1 backend/drm: remove drm_connector_set_custom_mode
Replace it with a function that returns the pending mode.
2020-05-26 23:34:37 +02:00
Simon Ser 21c6cc5e4c backend/drm: refuse to enable an output without a mode 2020-05-26 20:10:55 +02:00
Simon Ser 47e5212823 backend/drm: rollback atomic blobs
If the atomic commit fails or is test-only, rollback
wlr_drm_crtc.{mode_id,gamma_lut} blob IDs to their previous value. This
prevents the next commits from failing or applying test-only state.
2020-05-26 20:01:38 +02:00
Simon Ser af2f69e6c1 render/egl: unset current context after swapping buffers
After swapping buffers, it doesn't make sense to perform more rendering
operations. Unset the context to reflect this.

This commit makes it so the context is always only current between
wlr_egl_make_current and wlr_egl_swap_buffers.

This is an alternative to [1].

[1]: https://github.com/swaywm/wlroots/pull/2212
2020-05-20 17:39:34 +02:00
Simon Ser d28a7da95d backend/drm: add missing wlr_egl_unset_current 2020-05-19 21:32:38 +02:00
Simon Ser cfed5766b7 backend/drm: fix current EGL context on multi-GPU
get_tex_for_bo changes the current EGL context. Rendering operations
must immediately follow drm_surface_make_current.

Closes: https://github.com/swaywm/wlroots/issues/2209
2020-05-19 21:32:38 +02:00
Simon Ser 1edc42157b render/egl: introduce wlr_egl_unset_current
This function can be called after wlr_egl_make_current to cleanup the
EGL context. This avoids having lingering EGL contexts that make things
work by chance.

Closes: https://github.com/swaywm/wlroots/issues/2197
2020-05-19 14:56:20 +02:00
Simon Ser 781ed1ff02 Fix -Wreturn-type warnings
When calling assert(0) instead of returning a value, -Wreturn-type
warnings are triggered because assertions can be disabled. Replace these
assertions with abort().
2020-05-19 14:54:02 +02:00
Simon Ser 2988ebb6f3 backend/drm: fix atomic commits when the GAMMA_LUT prop is missing
We already have the logic to fallback to the legacy interface above. We
just need to avoid calling atomic_add with a zero prop ID.

Closes: https://github.com/swaywm/wlroots/issues/2187
2020-05-14 23:55:43 +00:00
Simon Ser 347bdb6d9a output: make wlr_output_set_gamma atomic
wlr_output_set_gamma is now double-buffered and applies the gamma LUT on
the next output commit.
2020-05-14 20:09:28 +02:00
Simon Ser 42e485dcc3 backend/drm: fix segfault in drm_crtc_page_flip
When no cursor plane is available, drm_crtc_page_flip would segfault.
2020-05-14 10:20:37 +02:00
Simon Ser 51bbf31742 backend/drm: print error in set_plane_props
This makes it easier to understand which plane failed.
2020-05-12 15:12:22 +02:00
Simon Ser 9412d34e2d backend/drm: disable cursor in dealloc_crtc
dealloc_crtc was destroying GBM surfaces, but the cursor_enabled flag
was left as-is. When re-enabling the output, atomic_crtc_pageflip would
try enabling the cursor plane, but would fail because no framebuffer is
available.

Closes: https://github.com/swaywm/wlroots/issues/2150
2020-05-12 15:12:22 +02:00
Simon Ser da4df82532 backend/drm: fix combined modeset+enable commits
When an output is enabled and modeset at the same time,
drm_connector_commit would first try to modeset then try to commit. This
won't work because both will trigger a page-flip. KMS will reject that.

Change the logic to only enable an output if no modeset has been
requested. The logic in wlr_output already checks that the user isn't
doing a modeset and disabling the output at the same time.
2020-05-12 15:12:06 +02:00
Simon Ser cdb6fdbc6c backend/drm: remove missing cursor plane workaround
We have a workaround for legacy drivers that support drmModeSetCursor
without exposing a cursor plane. It doesn't work anymore now that we've
moved to a more atomic interface.

Let's just remove this workaround and fallback to software cursors.

Closes: https://github.com/swaywm/wlroots/issues/2166
2020-05-12 08:57:13 +02:00
JonnyMako 1139234117
backend/drm: fix missing cursor on external monitors with multi-GPU setup and nouveau
We need to make the multi-GPU surface current before the glFinish call.

Closes: https://github.com/swaywm/sway/issues/5319
2020-05-11 08:51:41 +02:00
Simon Ser f72686c0b6 backend/drm: fix crash in session_signal
conn->crtc is NULL in case the output is disabled.

However, the DRM backend will set the GAMMA_LUT property anyway. On each
commit the whole state is sent to KMS. Adding WLR_DRM_CRTC_GAMMA_LUT to
the pending state would just make the backend re-create the blob
containing the gamma LUT.
2020-05-10 12:07:05 +02:00
Simon Ser 2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser 06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00
Simon Ser f8e02db4bc backend/drm: remove conn_enable from interface
Use crtc_commit instead.
2020-05-09 16:42:25 +02:00
Simon Ser c608fc89d8 backend/drm: rename crtc_pageflip to crtc_commit
Also add a flags argument.

The commit function will also be used for disabling the CRTC.
2020-05-09 16:42:25 +02:00
Simon Ser 70883fd10b backend/drm: apply gamma LUT on page-flip 2020-05-09 16:42:25 +02:00
Simon Ser 69b2279092 backend/drm: remove mode argument to crtc_pageflip
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending
output changes. More fields will be added in the future (e.g. active,
gamma).
2020-05-09 16:42:25 +02:00
Simon Ser c9d6b18eef backend/drm: remove wlr_drm_interface.crtc_move_cursor
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-09 16:42:25 +02:00
Tudor Brindus 6357e166f9 backend/wayland: emit tablet tool axis events to the axis handler 2020-05-04 21:53:52 +02:00
Simon Ser 46c83cbf3d backend/headless: handle renderer destroy
When the headless backend uses an already-existing renderer, it doesn't
have ownership over the renderer. When the renderer is destroyed, the
headless backend needs to destroy itself.
2020-05-02 19:36:03 +02:00
Simon Ser 7720ce7827 backend/multi: handle backends depending on each other properly
wl_list_for_each_safe only allows the current list item to be removed.
If a backend destroys itself when another backend is destroyed, this
blows up.
2020-05-02 19:36:03 +02:00
Simon Ser 90ede7f838 backend/drm: make page-flip error scarier
The logs don't currently display the importance of a line. It's easy to
read "skipping page-flip" as a debug message instead of an error
message.

Change the error message to make it more explicit.

References: https://github.com/swaywm/wlroots/pull/2147
2020-05-01 16:48:42 +02:00
Will Daly 044a9f28d6 Fix error when reconnecting external display
Reconnecting an external display fails on initial
page-flip.  This occurs when the pageflip_pending flag
has been set on the connector at the time the monitor
is removed.  Once the connector's CRTC has been deallocated,
page_flip_handler cannot find the connector by its crtc_id,
so pageflip_pending will remain set.  This causes
initialization to fail when the monitor is reconnected
with the error messages:

    Skipping pageflip on output 'X'
    Failed to initialize renderer on connector 'X': initial page-flip failed

To fix this problem, clear the pageflip_pending flag
when cleaning up the connector.
2020-05-01 16:01:30 +02:00
Scott Anderson 906c0766df Remove libcap support
This is simply a false sense of security, and is worse than just using
setuid. CAP_SYS_ADMIN is an extremely serious capability that is
effectively as powerful as root.

It also required users to be in the input group, which allows any
process to keylog the entire system.
2020-04-29 10:39:09 +02:00
Simon Ser 98d949718c backend/drm: strip alpha channel if necessary
Some primary planes don't support ARGB8888, they only support XRGB8888
(for instance on older Intel hardware). The DRM backend would fail to
initialize.

When that's the case, try to allocate buffers without an alpha channel.
2020-04-29 08:32:06 +02:00
Scott Anderson 321537ee92 backend/drm: don't allow legacy to use direct scanout 2020-04-28 09:54:52 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson be90062c51 backend/drm: don't have fallback atomic commits
This is just doing atomic incorrectly.
2020-04-28 09:54:52 +02:00