Commit Graph

420 Commits

Author SHA1 Message Date
Sudarsan Reddy de7ca4be30 TUN-7077: Specific name in cloudflare tunnel route lb command 2023-01-17 10:10:02 +00:00
Devin Carr 794e8e622f TUN-6724: Migrate to sentry-go from raven-go 2023-01-11 15:48:03 +00:00
Sudarsan Reddy d19da6767a TUN-7021: Fix proxy-dns not starting when cloudflared tunnel is run
This PR starts a separate server for proxy-dns if the configuration is
available. This fixes a problem on cloudflared not starting in proxy-dns
mode if the url flag (which isn't necessary for proxy-dns) is not
provided. Note: This is still being supported for legacy reasons and
since proxy-dns is not a tunnel and should not be part of the
cloudflared tunnel group of commands.
2022-12-20 11:26:27 +00:00
Sudarsan Reddy 99b3736cc7 TUN-6999: cloudflared should attempt other edge addresses before falling back on protocol
This PR does two things:
It changes how we fallback to a lower protocol: The current state
is to try connecting with a protocol. If it fails, fall back to a
lower protocol. And try connecting with that and so on. With this PR,
if we fail to connect with a protocol, we will try to connect to other
edge addresses first. Only if we fail to connect to those will we
fall back to a lower protocol.
It fixes a behaviour where if we fail to connect to an edge addr,
we keep re-trying the same address over and over again.
This PR now switches between edge addresses on subsequent connecton attempts.
Note that through these switches, it still respects the backoff time.
(We are connecting to a different edge, but this helps to not bombard an edge
address with connect requests if a particular edge addresses stops working).
2022-12-14 13:17:21 +00:00
João Oliveirinha e517242194 TUN-6995: Disable quick-tunnels spin up by default
Before this change when running cloudflare tunnel command without any
subcommand and without any additional flag, we would spin up a
QuickTunnel.

This is really a strange behaviour because we can easily create unwanted
tunnels and results in bad user experience.
This also has the side effect on putting more burden in our services
that are probably just mistakes.

This commit fixes that by requiring  user to specify the url command
flag.
Running cloudflared tunnel alone will result in an error message
instead.
2022-12-13 12:03:32 +00:00
Sudarsan Reddy 7dee179652 TUN-7004: Dont show local config dirs for remotely configured tuns
cloudflared shows possible directories for config files to be present if
it doesn't see one when starting up. For remotely configured files, it
may not be necessary to have a config file present. This PR looks to see
if a token flag was provided, and if yes, does not log this message.
2022-12-13 11:03:00 +00:00
João Oliveirinha b0663dce33 TUN-6970: Print newline when printing tunnel token 2022-11-24 16:03:47 +00:00
João Oliveirinha af59851f33 TUN-6963: Refactor Metrics service setup 2022-11-22 11:35:48 +00:00
João Oliveirinha 19106cd609 TUN-6935: Cloudflared should use APIToken instead of serviceKey
This commit makes cloudflared use the API token provided during login
instead of service key.
In addition, it eliminates some of the old formats since those are
legacy and we only support cloudflared versions newer than 6 months.
2022-11-16 17:07:16 +00:00
João Oliveirinha b50f172bdb Revert "TUN-6935: Cloudflared should use APIToken instead of serviceKey"
This reverts commit 1c6316c1c9.
2022-11-16 12:05:09 +00:00
João Oliveirinha 1c6316c1c9 TUN-6935: Cloudflared should use APIToken instead of serviceKey
This commit makes cloudflared use the API token provided during login
instead of service key.
In addition, it eliminates some of the old formats since those are
legacy and we only support cloudflared versions newer than 6 months.
2022-11-16 10:04:17 +00:00
n0k0m3 1b5313cc28
Issue #574: Better ssh config for short-lived cert (#763)
This PR is made using suggestion from #574. The pros for this config is that it will work both Windows and Linux (tested), as well as in VSCode, which normally can't be done with the current generated ssh config (refers to #734)
2022-11-02 10:44:34 +00:00
João Oliveirinha e6c9ec0b39 TUN-6871: Add default feature to cloudflared to support EOF on QUIC connections 2022-10-24 13:14:47 +01:00
cthuang 495f9fb8bd TUN-6856: Refactor to lay foundation for tracing ICMP
Remove send and return methods from Funnel interface. Users of Funnel can provide their own send and return methods without wrapper to comply with the interface.
Move packet router to ingress package to avoid circular dependency
2022-10-17 19:48:35 +01:00
Jamie Nguyen 9904929b83 Fix typo in help text for `cloudflared tunnel route lb` 2022-10-12 11:45:13 +01:00
Bas Westerbaan f4ae8d1446 Add post-quantum flag to quick tunnel
Github #773
2022-10-05 01:33:17 +02:00
cthuang be0305ec58 TUN-6741: ICMP proxy tries to listen on specific IPv4 & IPv6 when possible
If it cannot determine the correct interface IP, it will fallback to all interfaces.
This commit also introduces the icmpv4-src and icmpv6-src flags
2022-09-26 11:37:08 +01:00
cthuang 3d345d3748 TUN-6595: Enable datagramv2 and icmp proxy by default 2022-09-20 14:02:02 +00:00
Bas Westerbaan 11cbff4ff7 RTG-1339 Support post-quantum hybrid key exchange
Func spec: https://wiki.cfops.it/x/ZcBKHw
2022-09-07 19:32:53 +00:00
Devin Carr cfef0e737f TUN-6720: Remove forcibly closing connection during reconnect signal
Previously allowing the reconnect signal forcibly close the connection
caused a race condition on which error was returned by the errgroup
in the tunnel connection. Allowing the signal to return and provide
a context cancel to the connection provides a safer shutdown of the
tunnel for this test-only scenario.
2022-08-31 21:50:02 +00:00
Anton Kozlov e63ec34503 cURL supports stdin and uses os pipes directly without copying 2022-07-21 16:23:02 +00:00
Devin Carr 2a177e0fc4 TUN-6583: Remove legacy --ui flag 2022-07-20 16:17:29 -07:00
Nuno Diegues 7607ead143 TUN-6503: Fix transport fallback from QUIC in face of dial error "no network activity" 2022-07-06 13:05:45 +01:00
Stephen Heckler efd4556546 Ensure service install directories are created before writing file 2022-06-28 12:31:18 -05:00
Devin Carr 2e2718b7e3 TUN-6459: Add cloudflared user-agent to access calls 2022-06-24 11:51:53 -07:00
Devin Carr ae7fbc14f3 TUN-6373: Add edge-ip-version to remotely pushed configuration
(cherry picked from commit 8e9091cc48)
2022-06-23 16:55:03 +00:00
Silver ee87c43eb9
Merge pull request #656 from nikr-canva/http2-origins
Add Http2Origin option to force HTTP/2 origin connections
2022-06-16 12:23:07 -05:00
Devin Carr b9453b84bb Revert "TUN-6373: Add edge-ip-version to remotely pushed configuration"
This reverts commit 8e9091cc48.
2022-06-14 16:07:37 -07:00
Igor Postelnik f2339a7244 TUN-6380: Enforce connect and keep-alive timeouts for TCP connections in both WARP routing and websocket based TCP proxy.
For WARP routing the defaults for these new settings are 5 seconds for connect timeout and 30 seconds for keep-alive timeout. These values can be configured either remotely or locally. Local config lives under "warp-routing" section in config.yaml.

For websocket-based proxy, the defaults come from originConfig settings (either global or per-service) and use the same defaults as HTTP proxying.
2022-06-14 21:36:40 +00:00
Devin Carr 8e9091cc48 TUN-6373: Add edge-ip-version to remotely pushed configuration 2022-06-14 15:41:16 +00:00
Devin Carr e3aad7799e TUN-6357: Add connector id to ready check endpoint 2022-06-08 17:35:23 +00:00
Devin Carr 2b0d704777 TUN-6341: Fix default config value for edge-ip-version 2022-06-02 20:12:15 -07:00
Devin Carr ee80e55833 TUN-6339: Add config for IPv6 support 2022-06-02 16:04:26 -07:00
Niklas Rehfeld 7d4afd4ae0 Add Http2Origin option to force HTTP/2 origin connections
If `http2Origin` is set, it will set `ForceAttemptHTTP2` in the transport config of the `OriginService`.
2022-06-01 12:57:29 +12:00
Nuno Diegues 5e6f606f4e TUN-6293: Update yaml v3 to latest hotfix
This addresses https://security.snyk.io/vuln/SNYK-GOLANG-GOPKGINYAMLV3-2841557
by updating yaml v3 to latest version.

It also stops using yaml v2 directly (we were using both v2 and v3 mixed).
We still rely on yaml v2 indirectly, via urfave cli, though.

Note that the security vulnerability does not affect v2.
2022-05-30 17:38:55 +00:00
João Oliveirinha 99d4e48656 TUN-6016: Push local managed tunnels configuration to the edge 2022-05-06 15:43:24 +00:00
João Oliveirinha 3254d08173 TUN-6014: Add remote config flag as default feature 2022-04-28 12:00:47 +01:00
Devin Carr a97233bb3e TUN-6030: Add ttfb span for origin http request 2022-04-21 15:49:22 +00:00
Nuno Diegues 7a6ab54fcb TUN-6043: Allow UI-managed Tunnels to fallback from QUIC but warn about that 2022-04-12 09:46:07 +01:00
Nuno Diegues a0f6eb9d5e TUN-5992: Use QUIC protocol for remotely managed tunnels when protocol is unspecified 2022-04-05 23:07:10 +01:00
Nuno Diegues c5d1662244 TUN-5960: Do not log the tunnel token or json credentials 2022-03-28 10:54:39 +01:00
Nuno Diegues 092e76eb55 TUN-5954: Start cloudflared service in Linux too similarly to other OSs 2022-03-25 13:57:47 +00:00
Nuno Diegues 62e1330e45 TUN-5933: Better messaging to help user when installing service if it is already installed 2022-03-24 17:19:23 +00:00
Nuno Diegues 98736a03e1 TUN-5915: New cloudflared command to allow to retrieve the token credentials for a Tunnel 2022-03-23 10:35:16 +00:00
Nuno Diegues 470e6c35c5 TUN-5918: Clean up text in cloudflared tunnel --help 2022-03-22 18:52:28 +00:00
Devin Carr e2a8302bbc TUN-5869: Add configuration endpoint in metrics server 2022-03-22 08:11:59 -07:00
Nuno Diegues 1b511b2d25 TUN-5881: Clarify success (or lack thereof) of (un)installing cloudflared service 2022-03-18 18:10:02 +00:00
Igor Postelnik 398cc8b134 TUN-5893: Start windows service on install, stop on uninstall. Previously user had to manually start the service after running 'cloudflared tunnel install' and stop the service before running uninstall command. 2022-03-17 17:52:39 -05:00
Nuno Diegues 057a0cc758 TUN-5833: Send feature `allow_remote_config` if Tunnel is run with --token 2022-03-16 14:07:03 +00:00
cthuang ca43b0357f TUN-5867: Return error if service was already installed 2022-03-16 11:33:44 +00:00