311c5779ea
Remove unused variable
2021-07-20 23:03:41 -04:00
08e886ebc6
Search for device automatically if none given
2021-07-20 21:09:00 -04:00
40e6360722
Update css class when locked/unlocked
2021-07-20 21:09:00 -04:00
642e28166b
Add more configuaration
2021-07-20 21:09:00 -04:00
6dfa31fb17
Basic keyboard state module
2021-07-20 21:09:00 -04:00
6f2bfd43bf
Fix pulseaudio icon name compilation error
2021-07-20 15:25:05 +02:00
f43f8773c4
Merge pull request #1169 from roosemberth/pa-control-active-sink
...
pulseaudio: Control currently running sink
2021-07-20 14:01:23 +02:00
86a43b9042
pulseaudio: Control currently running sink
...
In a system with multiple sinks, the default sink may not always be
the once currently being used. It is more useful to control the
currently active sink rather than an unused one.
This patch does not make any difference if the system only uses the
default sink.
Signed-off-by: Roosembert Palacios <roosemberth@posteo.ch>
2021-07-20 10:16:53 +02:00
9c2b5efe7b
Support per-device icon in pulseaudio
2021-07-15 09:20:43 +02:00
8310700bbb
Improve sway/language
2021-07-13 04:33:12 +03:00
368e4813de
libfmt >=8.0.0 compatibility
2021-06-30 13:12:38 -05:00
194f4c2f18
network: Fix mix use of default and state specific format
...
Whenever the network module is configured with both "format" and
"format-$state" and when the module use "format-$state" once, it
override the value that was saved from "format".
For example, if both "format" and "format-disconnect" are configured,
and only those, as soon as the module show information about a
disconnected interface, it will keep showing the format for
disconnected, even if the interface is connected again later.
Fix that by always setting a value to default_format_ in update() and
thus use the intended default format when needed.
Fixes #1129
2021-06-08 18:50:32 +01:00
9e34be7b16
Merge pull request #1126 from tperard/fix-network-auto-detection
...
Fix network interface auto detection
2021-06-05 18:06:30 +02:00
33617b67f0
network: Fix one case where default route is deleted without notification
...
When an interface's state is change to "down", all the route
associated with it are deleted without an RTM_DELROUTE event.
So when this happen, reset the module to start looking for a new
external interface / default route.
Fixes #1117
2021-06-05 16:52:04 +01:00
efaac20d82
network: Handle ip route priority
...
When there's a new default route with higher priority, switch to it.
2021-06-05 16:51:54 +01:00
ce97df34e6
network: Also clear ifname in clearIface()
...
Since we reset `ifid_`, clear `ifname_` as well.
2021-06-05 16:51:40 +01:00
23b9923eeb
network: Parse whole RTM_NEWROUTE msg before interpreting it
...
The check to figure out if we have the default route should be after
the for loop that parses the route attributes, to avoid acting on
incomplete information. We are going to use more fields from the
message.
2021-06-05 16:51:35 +01:00
999c1b6b81
sway-language: ignore events with empty layout
2021-06-05 15:03:52 +02:00
1a98ecf6b0
Merge branch 'master' into fix_power_calc
2021-05-30 11:17:54 +01:00
f49a7a1acb
network: Update WiFi information when available
...
The module doesn't update the `essid_` as soon as a WiFi interface is
connected, but that happens at some point later, depending on
"interval" configuration.
Fix that by rerunning the get WiFi information thread when the
`carrier` state changes. Also, we will clear the state related to WiFi
when the connection is drop to avoid stale information.
2021-05-27 19:36:14 +01:00
28dfb0ba41
network: Fix use of carrier information
...
Some RTM_NEWLINK messages may not have the IFLA_CARRIER information.
This is the case when a WiFi interface report scan result are
available. `carrier` is used regardless of if it is present in the
message or not. This would result in the interface appearing
"disconnected" in waybar when it isn't.
This patch now check that `carrier` is available before using it.
The same thing could potentially happen to `ifname` so check if it's
set before recording it.
Fixes: c1427ffFixes #388
2021-05-26 19:23:20 +01:00
c1427ff807
network: Handle carrier information
...
IFLA_CARRIER allows to know when a cable is plugged to the Ethernet
card or when the WiFi is connected. If there's no carrier, the
interface will be considered disconnected.
2021-05-15 16:38:00 +01:00
0bb436f949
network: Rework interface auto detection, handle route change events
...
Last part of the rework of handleEvents(), this time we take the
getExternalInterface() function and add it to the handleEvents()
function. That way, waybar can react immediately when a new "external
interface" is available and doesn't need to probe. Also that avoid to
have two different functions consuming from the same socket and we
don't need to recode some of the functions that are already available
via libnl (to send and receive messages).
2021-05-15 16:38:00 +01:00
0fc7ef6685
network: Rework address lookup to use only events
...
In order to get the IP address of an interface, we can get the
information out of NEWADDR events without needed to call getifaddrs().
And when now events are expected, we can requests a dump of all
addresses and handle addresses changes the same way via handleEvents()
only.
2021-05-15 16:38:00 +01:00
c9bbaa7241
network: Rework initial interface search by using a dump
...
Instead of using an alternative way to list all links in order to
choose one when an "interface" is in the configuration, we can ask for
a dump of all interface an reuse the handleEvents() function.
This patch also start to rework the handleEvents() function to grab
more information out of each event, like the interface name.
2021-05-15 16:38:00 +01:00
63fdf66ad6
network: Read all available messages on ev_sock_
...
When more than one message is available to read on the ev_sock_
socket, only the first one is read.
Make some changes to be able to read all the messages available by
setting the socket to non-blocking. This way we can detect when
there's nothing left to read and loop back to wait with epoll.
2021-05-15 16:38:00 +01:00
9357a6cb88
network: Start the module with some text in the label_
...
Fix modules starting with no text, but not hidding.
Start with some "text" in the module's label_, update() will then
update it. Since the text should be different, update() will be able
to show or hide the event_box_. This is to work around the case where
the module start with no text, but the the event_box_ is shown.
2021-05-15 16:38:00 +01:00
dbc06abf18
network: Initialise cidr_ like clearIface() does
2021-05-15 16:38:00 +01:00
4d067619a8
Fix power calculation when battery units are in μA instead of μW
2021-05-15 15:55:38 +01:00
f3a6e2d494
fix: incorrect battery percentage on Pinebook Pro
2021-05-10 21:00:14 +02:00
71d7596b6f
fix: bluetooth status tooltip
2021-04-30 14:23:49 +02:00
a03283d65f
rewriteTitle: allow multiple sequential rewrites
2021-04-26 20:26:43 +02:00
7e13e26c29
[modules/battery] allow format-discharging-full
...
`format-discharging-full` has been impossible since #923 made it
impossible to be full and discharging at the same time. This should
fix that by only making `format-charging-full` impossible. Whether
or not that should be allowed is a good question, but beyond the
scope of this change.
Fixes #1031
2021-04-25 22:00:24 -04:00
2213380dc0
[modules/pulseaudio] fix bluetooth class for PipeWire
...
apparently, pipewire-pulse slightly changed the naming of the sink.
2021-04-25 11:19:35 +02:00
af3c868a5b
Catch exception on erroneous rules
...
std::regex and std::regex_replace may throw an std::regex_error if the
expression or replacement contain errors.
Log this error and carry on with the next rule, so that the title is
shown even if the config contains errors.
2021-04-21 12:24:47 +02:00
b16c8972c7
Add option to rewrite sway/window title
...
Rewrites window title according to config option "rewrite".
"rewrite" is an object where keys are regular expressions and values are
rewrite rules if the expression matches. Rules may contain references to
captures of the expression. Regex and replacement follow ECMA-script
rules. If no regex matches, the title is left unchanged.
example:
"sway/window": {
"rewrite": {
"(.*) - Mozilla Firefox": " $1",
"(.*) - zsh": " $1",
}
}
2021-04-21 12:24:47 +02:00
fc89b01ba6
feat: implement mpd volume format template
...
Allow the user to show the current volume from MPD status via the
`format` and/or `tooltip-format` configuration options.
The values are provided by libmpdclient and are integers, generally
between 0-100 (without %). Values above 100 are also possible, as mpd
output plugins like `pulse` support volumes above 100%.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
2021-04-20 08:35:47 +02:00
ba278985e8
Add ignore-list param to wlr/taskbar
2021-04-18 21:34:29 +03:00
d0f60c47bf
Merge pull request #1070 from jgmdev/cpumodulefix
...
[Module CPU] fix crash due to empty frequencies.
2021-04-15 21:17:00 +02:00
07f2470e36
Merge pull request #974 from kamushadenes/patch-1
...
Improve Pulseaudio sink/source separation
2021-04-15 21:09:35 +02:00
f8f1e791a3
[Module CPU] fix crash due to empty frequencies.
...
On some systems (eg: ARM) the supported frequencies of the CPU are not
properly reported by /proc/cpuinfo so if that fails try to retrieve them
from /sys/devices/system/cpu/cpufreq/policy[0-9]/cpuinfo_[max|min]_freq.
2021-04-15 14:30:29 -04:00
c850212288
Use the correct battery status when multiple batteries are present
2021-03-28 20:07:35 +03:00
600afaf530
Merge pull request #1037 from Moonlight-Angel/cpu-frequency
...
Add cpu min/max/avg frequencies
2021-03-25 12:09:42 +01:00
bf3efdb89c
Merge branch 'master' into master
2021-03-14 21:34:25 -07:00
a49b12b66b
Fix CPU load values
2021-03-12 20:58:51 +01:00
1573e1eb97
change variable instead of substr(len)
2021-02-26 13:29:58 -08:00
99643ba2e6
Stub parseCpuFrequencies on *BSD platforms
2021-02-25 09:14:51 +01:00
08ea5ebe1f
Add cpu frequency
2021-02-25 09:14:51 +01:00
b4728f2e1d
Merge branch 'master' into master
2021-02-16 21:51:31 -08:00
08e19602f7
Merge pull request #1015 from alebastr/rfkill-events
...
rfkill code refactoring
2021-02-11 10:20:13 +01:00
b12b500bfc
Merge branch 'master' into master
2021-02-10 09:39:03 -08:00
6d5afdaa5f
fix(network): don't block the main thread on rfkill update
...
Moving rfkill to the main event loop had unexpected side-effects.
Notably, the network module mutex can block all the main thread events
for several seconds while the network worker thread is sleeping.
Instead of waiting for the mutex let's hope that the worker thread
succeeds and schedule timer thread wakeup just in case.
2021-02-09 21:27:22 -08:00
52dd3d2446
refactor(bluetooth): remove `interval` and timer thread
...
The timer thread was always reading the same value from Rfkill state.
2021-02-09 21:27:21 -08:00
ecc32ddd18
refactor(bluetooth): remove Bluetooth::status_
...
The string was always overwritten in `update()`; don't need to store
temporary value in the class.
2021-02-09 21:27:20 -08:00
38c29fc242
refactor(rfkill): poll rfkill events from Glib main loop
...
Open rfkill device only once per module.
Remove rfkill threads and use `Glib::signal_io` as a more efficient way
to poll the rfkill device.
Handle runtime errors from rfkill and stop polling of the device instead
of crashing waybar.
2021-02-09 21:27:19 -08:00
95a6689077
disable Idle Inhibitor module if unsupported
2021-02-09 18:37:13 -05:00
f3ce7ff86c
Merge pull request #1021 from jgmdev/taskbar-icons
...
[wlr/taskbar] Check StartupWMClass
2021-02-07 16:52:34 +01:00
e4a65c72dd
Added missing 'if' space.
2021-02-07 04:27:16 -04:00
f14a73584f
[wlr/taskbar] Added break when matching StartupWMClass is found.
2021-02-07 01:01:57 -04:00
fffb52dd93
[wlr/taskbar] Check StartupWMClass on list returned by g_desktop_app_info_searchi()
2021-02-07 00:50:52 -04:00
71f9ed3099
Merge pull request #1018 from jgmdev/taskbar-icons
...
[wlr/taskbar] Fix unhandled exception crash when icon name is a path.
2021-02-04 10:05:02 +01:00
e293b89f6b
[wlr/taskbar] Removed unnecessary catch statement.
2021-02-04 04:57:08 -04:00
8a284e7c74
[wlr/taskbar] Declared load_icon_from_file() static.
2021-02-03 21:14:04 -04:00
22ed153004
[wlr/taskbar] Fix unhandled exception crash when icon name is a path.
2021-02-03 21:04:10 -04:00
7eb2a6b709
Add a configuration entry to disable auto_back_and_forth on Sway workspaces
2021-02-02 21:58:26 +01:00
f2e9bb54f0
Merge pull request #1011 from jgmdev/taskbar-icons
...
[wlr/taskbar] More icon search improvements.
2021-02-02 09:03:35 +01:00
ac6667b1c9
[wlr/taskbar] More icon search improvements.
...
* Added ~/.local/share prefix to search in user defined apps.
* Add support for apps that don't properly set an id like pamac.
2021-02-02 01:03:28 -04:00
7d78a3aeef
Merge pull request #1001 from max-k/master
...
[sway/window] Add app_id to usable fields in title
2021-02-01 22:23:49 +01:00
35062ceb99
Merge branch 'master' into master
2021-01-31 12:01:49 -08:00
f05afb5468
Merge branch 'master' into fullwidth-length
2021-01-31 11:58:12 -08:00
ecba117dc0
remove unnessecary logging
2021-01-31 11:56:25 -08:00
d2a1f41750
Use g_unichar_iswide to properly align calendar on CJK locales
2021-01-31 11:53:53 -08:00
3881af4bbe
Improved wlr/taskbar icon search.
2021-01-31 15:37:26 -04:00
6cc3212605
add length limits for MPD module tags
2021-01-30 18:04:59 -08:00
e19aa1d43a
[sway/window] Add app_id to usable fields in title
2021-01-30 01:41:45 +01:00
3bcf390484
add power to battery formatter
2021-01-24 21:39:14 +01:00
dc38640341
Merge branch 'master' into patch-1
2021-01-18 10:55:40 -03:00
66e5fda418
Merge pull request #964 from Ocisra/master
...
Add an option to use battery design capacity
2021-01-18 13:48:03 +01:00
392b0679c9
Merge branch 'master' into master
2021-01-18 12:39:25 +01:00
0bd96f339e
typo
2021-01-18 12:38:02 +01:00
ce0bf6269b
battery: use timeTo as the default format name
2021-01-18 12:32:51 +01:00
fdaba72974
Merge branch 'master' into battery-custom-tooltip
2021-01-18 12:22:44 +01:00
51bfe9eaf6
Merge pull request #881 from olemartinorg/master
...
Support format-{state} for cpu/disk/memory
2021-01-18 12:02:59 +01:00
a25cf4d188
Merge pull request #891 from danieldg/temp-tooltip
...
Add "tooltip-format" to temperature module
2021-01-18 12:01:34 +01:00
ede1146ddc
Merge pull request #903 from spk/simpleclock
...
Add simpleclock as fallback when hhdate is not available
2021-01-18 12:00:48 +01:00
9d5ce45f3b
add option tag-labels to river/tags
2021-01-15 01:07:56 +00:00
a7941a00c5
fix missing parentheses
2021-01-12 19:10:34 -03:00
f4ffb21c8c
improve sink/source separation
...
Add additional fields, namely `source_volume` and `source_desc`
Add `tooltip-format`, reverting to default behavior if not specified
Add additional CSS classes, namely `sink-muted` and `source-muted`
2021-01-12 18:51:44 -03:00
b79301a5bd
fix(wlr/taskbar): protocol error when reconnecting outputs
...
Destroy request is not specified for foreign toplevel manager and it
does not prevent the compositor from sending more events.
Libwayland would ignore events to a destroyed objects, but that could
indirectly cause a gap in the sequence of new object ids and trigger
error condition in the library.
With this commit waybar sends a `stop` request to notify the compositor
about the destruction of a toplevel manager. That fixes abnormal
termination of the bar with following errors:
```
(waybar:11791): Gdk-DEBUG: 20:04:19.778: not a valid new object id (4278190088), message toplevel(n)
Gdk-Message: 20:04:19.778: Error reading events from display: Invalid argument
```
2021-01-08 15:41:48 -08:00
ef9c3ef1cb
fix(wlr/taskbar): fix wl_array out-of-bounds access
...
wl_array->size contains the number of bytes in the array instead of the
number of elements.
2021-01-08 15:28:29 -08:00
00046d309d
add an option to use battery design capacity as a reference for percentage informations
2021-01-03 15:25:19 +01:00
005af7f7b7
Revert "Fix waybar-pulseaudio with pipewire-pulse"
...
This reverts commit 0d03c1d4da
2020-12-25 17:37:21 +01:00
dd2792b204
Merge pull request #937 from ilpianista/bugfix/pipewire-pulse
...
Fix waybar-pulseaudio with pipewire-pulse
2020-12-23 21:39:40 +01:00
cb7baee045
Fixed compile error
2020-12-18 18:17:17 -05:00
85ca5027f4
Fix Sway #waybar.solo CSS rule applying on split
...
This error occurs because of an incorrect assumption that the size of
the list of nodes that contains the focused window is the number of
windows in a workspace.
The windows in a workspace are stored as a tree by Sway, rather than a
list, so the number of windows has to be found by counting the leaves of
a workspace tree.
2020-12-18 18:14:14 -05:00
d382734698
Merge branch 'master' into bugfix/pipewire-pulse
2020-12-09 18:14:22 +01:00
0d03c1d4da
Fix waybar-pulseaudio with pipewire-pulse
2020-12-04 23:51:10 +01:00
68b6136989
fix(sway/workspaces): ignore emulated scroll events
...
GDK Wayland backend can emit two events for mouse scroll: one is a
GDK_SCROLL_SMOOTH and the other one is an emulated scroll event with
direction. We only receive emulated events on a window, thus it is not
possible to handle these in a module and stop propagation.
Ignoring emulated events should be safe since those are duplicates of
smooth scroll events anyways.
Fixes #386
2020-12-04 01:09:42 -08:00
18f129a712
Spit out a warning when trying to set/unset fullscreen without server supporting it
...
Previously we only checked when connecting to the server whether it had
the minimum required version but didn't act accordingly in the various
functions that use the functionality of later versions. If there were a
server in the wild, that actually would not have this functionality,
there would have been a crash. Fix this by checking the version before
using the functionality and gracefully abort it.
2020-12-04 08:04:02 +01:00
bb60e68b9d
Update to the latest version of the foreign toplevel manager protocol
...
There was an update the of the toplevel manager protocol. Unfortunately,
there are no new interesting updates with regard to the taskbar
implementation. Nonetheless, update the protocol xml files to the latest
version so that the implementation is up-to-date.
While being there, also change the debug warning that is shown when
there is a version mismatch between the server and client version of the
protocol.
2020-12-04 08:03:43 +01:00
09c89bcd20
Don't update battery list on every update
...
Speedup battery state update by only updating the battery list when we
get a CREATE/DELETE event in the directory or whenever we do a full
refresh on the interval.
2020-12-03 09:52:33 +00:00
cc365a8175
Merge pull request #923 from pedrocr/fix-battery-calculations
...
Simplify and improve battery state calculations
2020-12-02 14:35:56 +01:00
29f78e0426
Fix a few compiler warnings
...
There was one uninitialized value warning and two mismatched-sign
compare warnings. They both appear valid, the first occurring when MPD's
"format-stopped" contains {songPosition} or {queueLength} and the second
occurring when the clock's "timezones" array is more than 2 billion
items long (not likely, I admit). Fix both issues.
2020-11-30 18:07:22 -08:00
31a4aff1f8
Don't show battery estimate at 0
...
If we think we're done might as well not show 0h 0min as the estimate
and just not show anything.
2020-11-27 14:23:37 +00:00
89ca155c43
Support hotplugging of batteries
...
Refresh the list of batteries on update to handle hotplug correctly.
Probably fixes #490 .
2020-11-27 13:56:04 +00:00
908fa2c6c2
Make the battery full-at go to 100%
...
full-at was capped at the value instead of allowing the battery to show
100% when you were at the full-at value. Uncapping makes more sense as
it makes the full-at value the new 100% and the scale goes down from
there. Whereas before the battery would stay at the full-at value until
it went down enough which is unrealistic.
2020-11-27 11:02:11 +00:00
f45d582957
Always mark battery as full at 100%
...
Since we're now clamping at 100% and rounding, mark as full at that
point. Some batteries will stay in charging state for a long time while
stuck at the same charge level. Just mark them as full to not be
confusing.
2020-11-27 11:02:11 +00:00
eb3f4216d4
Show battery state as rounded number
...
Round the battery charge state so that 99.9% shows as 100%.
2020-11-27 11:02:11 +00:00
e0cdcb6e30
Handle charging above 100% gracefully
...
When calibrating a battery it's possible to go above 100%. Handle that
gracefully by just presenting the battery as full and 100%.
2020-11-27 11:02:11 +00:00
a7056f7cce
Calculate battery state from just energy values
...
The energy values are all that's needed to calculate the battery state.
Using other values for the total capacity results in broken results in
some cases. This matches the output of TLP and i3status, while also
being more straightforward.
2020-11-27 11:02:11 +00:00
3b576ae12d
Add "tooltip-format" to temperature module
2020-11-26 20:23:19 -05:00
2695985da0
fix: compilation error with gcc 11
...
../src/modules/network.cpp:22:6: error: ‘optional’ in namespace ‘std’ does not name a template type
22 | std::optional<unsigned long long> read_netstat(std::string_view category, std::string_view key) {
| ^~~~~~~~
../src/modules/network.cpp:7:1: note: ‘std::optional’ is defined in header ‘<optional>’; did you forget to ‘#include <optional>’?
6 | #include "util/format.hpp"
+++ |+#include <optional>
7 | #ifdef WANT_RFKILL
2020-11-26 15:42:44 -08:00
05b12602d4
fix: don't check against nullptr
2020-11-26 15:16:55 +01:00
374d5ae5a1
fix: check get_icon return non nullpt
2020-11-26 15:10:33 +01:00
d8dafa7ecc
add minimize-raise() action
2020-11-18 20:12:07 +01:00
faacd76f62
Merge pull request #892 from alebastr/layer-surfaces-v3
...
Refactor layer surface implementations (again)
2020-11-02 10:17:57 +01:00
9785a89013
Making active a bool
2020-11-01 18:25:41 +00:00
b015836e7b
Ensure style class is removed from all IdleInhibitor instances by moving it to update().
2020-11-01 18:17:51 +00:00
a9dae931c7
Renaming idle_inhibitor_modules and idle_inhibitor_status to shorter, more convenient names.
2020-11-01 17:14:05 +00:00
071cb86b45
Moving idle inhibitor shared stuff out of Client and into idle_inhibitor module as static members.
2020-11-01 17:09:48 +00:00
c6743988d3
Removing 'click_param' as it is no longer used.
2020-11-01 16:03:39 +00:00
bb33427f65
Making idle_inhibitor_ private and initialised in constructor, as it was before.
2020-11-01 13:38:58 +00:00
4889e655eb
Since idle_inhibitor's have a surface, we should have one for each inhibitor module. Therefore, the status is stored on the Client, and all modules create or destroy their inhibitors depending on Client's idle_inhibitor_status. Also, when modules are destroyed they remove themselves from Client's idle_inhibitor_modules.
2020-11-01 13:33:28 +00:00
aa4fc3dd29
Idle inhibitor toggle no longer update all modules - a list of idle inhibitors is maintained on the Client.
2020-10-31 17:30:25 +00:00
4872091442
Draft fix for syncing idle inhibitor across outputs. The idle_inhibitor surface has been moved to Client, all instances of idle inhibitor module now use one surface between them. Any time an idle inhibitor is clicked, currently it force updates ALL modules on all outputs, this needs work.
2020-10-31 16:31:27 +00:00
abe1fa5bd4
Custom module - only call label_.set_tooltip_markup if tooltip markup has actually changed - fixes tooltips not appearing at all if a custom module is updating too frequently.
2020-10-31 12:21:51 +00:00
96d965fe04
Add simpleclock as fallback when hhdate is not available
...
ref https://github.com/Alexays/Waybar/issues/668
2020-10-29 19:40:28 +01:00
f97de599dd
refactor: header cleanup
...
Replace a couple of header includes with forward declarations.
2020-10-28 08:08:03 -07:00
67d54ef3d5
fix(wlr/taskbar): do not bind to unsupported protocol versions
...
It's not allowed to bind to a higher version of a wayland protocol than
supported by the client. Binding wlr-foreign-toplevel-manager-v1 v3 to
a generated code for v2 causes errors in libwayland due to a missing
handler for `zwlr_foreign_toplevel_handle_v1.parent` event.
2020-10-25 10:26:44 -07:00
be3f47b374
Fix various mpd bugs
...
- Add elapsedTime and totalTime to tooltip format arguments
- Catch format exceptions and print error
- Copy mpd connection error message before it gets freed
- Update display after connection to mpd was lost
2020-10-23 21:13:20 +02:00
f13f49ccb5
Merge branch 'master' into sway-language-module
2020-10-20 12:22:22 +03:00
ebdeb86703
feat(swaybar-ipc): handle visibility_by_modifier update
2020-10-19 19:35:55 -07:00
bc13453155
feat(swaybar-ipc): handle mode update
2021-09-15 22:39:51 +07:00
23e5181cac
feat(swaybar-ipc): add swaybar IPC client
2020-10-19 19:34:48 -07:00
587eb5fdb4
mpd: support password protected MPD
...
- Add MPD module option `password`, and document it.
- Add logic to send the password, directly after connecting to
MPD.
Fixes : #576
Signed-off-by: Joseph Benden <joe@benden.us>
2020-10-19 11:54:36 -07:00
8f961ac397
mpd: revamped to event-driven, single-threaded
...
Fix MPD connection issues by converting/rewriting module into a
state-machine driven system. It is fully single-threaded and uses
events for transitioning between states. It supports all features
and functionality of the previous MPD module.
Signed-off-by: Joseph Benden <joe@benden.us>
2020-10-18 10:37:57 -07:00
54beabb9dc
Revert "mpd: revamped to event-driven, single-threaded"
2020-10-18 10:45:31 +02:00
41752ad5a2
Merge pull request #877 from jbenden/jbenden/mpd-module
...
mpd: revamped to event-driven, single-threaded
2020-10-18 10:39:12 +02:00
8349316fcd
Merge branch 'master' into sway-language-module
2020-10-12 13:31:39 +03:00
4229e9b2ca
Implemented format-{state} for cpu/disk/memory
2020-10-12 02:05:26 +02:00
d6381eeaff
Merge branch 'master' into taskbar/remove-trim
2020-10-11 23:06:32 +02:00
f270d317bb
Merge pull request #869 from lrhel/master
...
Add format-icons for workspace's name entry in sway/workspaces module
2020-10-11 14:39:39 +02:00
cc3acf8102
feature: created sway language submodule; added styles & config part for a sway language submodule
2020-10-10 19:09:18 +03:00
21fdcf41c3
mpd: revamped to event-driven, single-threaded
...
Fix MPD connection issues by converting/rewriting module into a
state-machine driven system. It is fully single-threaded and uses
events for transitioning between states. It supports all features
and functionality of the previous MPD module.
Signed-off-by: Joseph Benden <joe@benden.us>
2020-10-08 16:43:22 -07:00
22e46ea6cc
sndio: Add reconnection support.
2020-10-04 14:59:20 -03:00
e4427cb017
sndio: Add module.
...
- can control sndio: change volume, toggle mute
- appearance is somewhat dynamic: takes muted status into account
- uses polling inside sleeper thread to update values
- uses sioctl_* functions, requires sndio>=1.7.0.
2020-10-04 02:54:57 -03:00
83d679bf72
Add format-icons for workspace's name entry
2020-09-26 23:06:12 +00:00
12016d35bb
disk module: add state for percentage_used
2020-09-23 14:01:25 +02:00
95f505a457
revert: restore eventfd
2020-09-21 10:56:40 +02:00
c651670222
Added song position and queue length.
2020-09-13 18:49:47 +02:00
459df4e0c9
Merge pull request #851 from tamirzb/exec-on-event
...
Add an "exec-on-event" config for the custom module
2020-09-08 09:18:32 +02:00
9e3e4368c7
custom: Add "exec-on-event" config
...
This config allows disabling the default behavior of re-executing the
script whenever an event that has a command set is triggered.
Fixes #841
2020-09-06 22:49:18 +03:00
225a0eccdd
Add support for memory tooltip
2020-09-02 14:35:39 +02:00
44119db436
Merge pull request #840 from tamirzb/fix-restart-interval
...
Fix "restart-interval" in the custom module
2020-08-28 15:38:41 +02:00
ba78199dd1
custom: Fix "restart-interval"
...
This commit fixes the issue where the process would restart immediately
and the thread would sleep after the process has restarted, and not
before.
Fixes #621
2020-08-28 01:43:19 +03:00
ea722615c4
Allow enabing pango markup in the taskbar string
...
The fix for taskbar tooltips in 6a2d214b55
2020-08-19 22:26:11 -04:00
8fb54f47ea
battery: allow custom tooltip format
2020-08-19 23:13:03 +02:00
d263607b27
network: fix typo - update tooltip only when it changes
2020-08-18 23:09:35 +02:00
b54fb24745
Remove trim usage in format
...
Some clang-tidy fixes
2020-08-16 15:54:21 +03:00
033f0b01b7
Fix rfkill condition
2020-08-15 10:36:15 +02:00
591eb2ea38
Merge pull request #821 from danieldg/new-clock-features
...
New clock features
2020-08-14 22:12:48 +02:00
4565f7f8b9
only compile rfkill into the network module if the feature is enabled.
2020-08-14 20:58:48 +02:00
62082bdb01
clock: scroll through multiple timezones
2020-08-13 18:53:18 -04:00
8cd6e13308
clock: allow custom formatting for today in calendar
2020-08-13 18:53:18 -04:00
29fa74f621
Add IDs to sway workspace buttons for CSS styling
...
In case you want to style a specific workspace add IDs to the workspace
buttons. Styling is done by matching button#sway-workspace-${name}.
2020-08-13 11:36:19 +01:00
8f10c9056c
Add option for no workspace switch on click
...
In sway/workspaces, just like disable-scroll turns on/off the ability to
change workspaces by scrolling the mouse add disable-click that turns
on/off the ability to change workspaces by clicking.
2020-08-12 11:38:48 +01:00
22409d27c5
Fix docs typos
...
Add removing buttons
Adjust handling multiple outputs.
2020-08-11 00:28:56 +03:00
42b6c089f3
Add docs and adjust sorting
2020-08-08 00:09:35 +03:00
0ad29a5960
Finish base implementation
2020-08-07 23:46:47 +03:00
4c251578e9
Add formatting and states handling
2020-08-07 02:45:08 +03:00
a446cd692d
Fix MPD, add missing while loop
2020-08-06 21:57:02 +02:00
9ebfc54eb5
switch workspace on mouse-down to match swaybar
...
fixes #686
2020-08-06 16:04:30 +02:00
4cd31cf3c3
Fix wlr/taskbar all-outputs config string
2020-08-05 20:39:12 -04:00
6a2d214b55
Fix titles containing & and other HTML entities
2020-08-05 20:39:12 -04:00
7638f5c595
Add base name representation
2020-08-06 01:42:57 +03:00
edd4d8ee11
Finish implement wlr
2020-08-05 23:10:08 +03:00
2b11b7ef8c
Base wlr impl (Manager, Group)
2020-08-05 02:17:38 +03:00
fb8cda9d90
network: make missing nl80211 non-fatal
...
This will enable the networking module to be used for ethernet
interfaces on kernels without nl80211 support.
It should be reasonable to allow desktop systems without
wireless interfaces to run custom kenrel configs
without nl80211 compiled in.
2020-07-31 08:15:16 +02:00
006850ea5e
Changed helper function for workspace->num assignment to a static method of Workspaces class
...
and adapted comments/method name to be consistent with the rest
2020-07-27 10:56:49 +02:00
15fe73a252
duplicate the logic to assign numbers to workspaces from sway into waybar to handle perisstent workspaces
2020-07-22 16:13:24 +02:00
759602af64
Update mpd.cpp
2020-07-18 10:23:04 +02:00
bc112eaae1
Convert icon-theme option to array|string
...
Use the config support of using arrays in its options instead of the
complicated and error-prone parsing of the string.
2020-07-07 11:22:08 +02:00
70e368a1c6
Refactor the lower_app_id logic
...
Move the lower_app_id lookup logic completely in the image_load_icon
method and use it also when looking up the icon from the desktop files
as well as icon themes.
2020-07-07 10:39:28 +02:00
7d9f6096fe
Respect XDG_DATA_DIRS when looking for icons.
...
Use the base folders as defined in $XDG_DATA_DIRS and only fall back to
/usr/share and /usr/local/share if the environment variable does not
exist.
2020-07-05 13:16:41 +02:00
06ad35c42b
Add support for multiple icon themes in the config
...
If there are multiple icon themes defined in the config option
'icon-theme' the module will try from left to right to find an icon.
The system default will always be added to this list.
2020-07-05 13:16:38 +02:00
b7e8275d90
Properly trim when splitting up the format string
...
Previously only single spaces would be trimmed and not multiple ones.
Now use a proper trim implementation for strings.
2020-07-05 13:13:34 +02:00
8a13ed59bc
Fix lower
2020-07-01 03:05:17 +03:00
43500a9983
Move lower to load_icon phase
2020-07-01 02:56:44 +03:00
8e6cbc1021
Change find icon priority and to_lower app_id
2020-07-01 02:10:22 +03:00
b7a8e8e544
Fix format option for the taskbar module
...
When using additional format options in addition to {icon} the format is
separated into text before and text after the icon. Each of the texts is
displayed in a separate label one before and one after the image for the
icon.
The code updating the labels on changes used the wrong format strings
when updating the label after the icon.
2020-06-24 09:47:34 +02:00
7429d1f9cc
Fix click events for the taskbar module
...
When only the option 'on-click-right' was set and no other 'on-click'
option than the taskbar module wouldn't register for click events and
hence those events were handled by the generic AModule::on-click code.
This code would try to start a shell with the specified command, which
wouldn't make any sense in this circumstances.
The taskbar code falsely checked for the 'on-click-left' option instead
for the 'on-click-right' when deciding to register for click events.
2020-06-24 09:36:28 +02:00
401ea05dd8
add check that all batteries from type battery
2020-06-16 12:30:21 +02:00
343a8bef22
river/tags: add module
2020-06-12 15:19:46 +02:00
0080feb9af
sway/workspaces: make clicking on workspaces idempotent
...
Previously, clicking on the same workspace you were on would throw you
to another workspace if `workspace_auto_back_and_forth yes` was
specified in your sway config. This also fixes workspace output moving
misbehaving and doing the same.
2020-06-09 20:43:43 -04:00
adaf843048
foreign-toplevel-manager based taskbar module ( #692 )
...
Co-authored-by: Alex <alexisr245@gmail.com>
2020-05-30 12:07:38 +02:00
e96a0bf799
refactor(custom): tooltip markup
2020-05-30 11:59:22 +02:00
6e7f22ac3a
fix: cancel thread and fix window close
2020-05-27 09:10:38 +02:00
94a4d41a65
disk: make used calculation match df(1) output
...
Substract space only available to superuser as well.
2020-05-26 07:47:08 +00:00
3b16946c25
fix(custom): avoid hide outside update
2020-05-25 09:21:04 +02:00
7b4ded306b
fix: restart-interval
2020-05-24 21:33:38 +02:00
2ffc96d0b2
fix: hide box by default
2020-05-24 19:02:52 +02:00
9a123052a0
refactor: check conn
2020-05-24 18:47:50 +02:00
9b9d13ab0d
feat: execNoRead
2020-05-24 18:27:21 +02:00
6ca4e14b29
Feat icons vector ( #716 )
2020-05-22 21:23:04 +02:00
6b32aca094
feat: debug cmd
2020-05-22 20:57:41 +02:00
b251c51936
fix: spdlog
2020-05-22 20:02:09 +02:00
60bad8279e
feat: add comment
2020-05-22 19:09:50 +02:00
a871dcaebe
fix: type
2020-05-22 18:56:32 +02:00
cef5b27b48
fix: prefer default fmt date formatting unless timezone specified
2020-05-22 18:52:26 +02:00
71b7b4e0f4
disk: properly calculate free/total size
...
On most Unix systems `f_blocks`, `f_bfree`, and `f_bavail` are
reported in units of `f_frsize`.
2020-05-19 10:43:45 +00:00
4e567d0483
cpu: port parseCpuinfo to BSDs
2020-05-19 10:43:42 +00:00
c4f7cdeec4
memory: port parseMeminfo to BSDs
2020-05-19 10:42:21 +00:00
c844d7ac2e
tray: drop std::filesystem dependency
2020-05-19 10:37:27 +00:00
d5df185ac6
cpu: make getCpuLoad more portable
...
../include/modules/cpu.hpp:4:10: fatal error: 'sys/sysinfo.h' file not found
#include <sys/sysinfo.h>
^~~~~~~~~~~~~~~
2020-05-19 10:37:27 +00:00
45deb2472c
fix: use strcmp
2020-05-19 12:14:59 +02:00
8fbaf06cbe
refactor(mpd): prefer debug over warn
2020-05-16 09:29:37 +02:00
08dce576bd
refactor(mpd): prefer debug over info
2020-05-16 09:28:30 +02:00
6fe764540c
sway/workspaces: sort by the "num" property provided by sway, configurable whether numeric workspace names come first
...
Sway provides the workspace "num" property which is an integer number of
the workspace, i.e., workspace "3" -> 3 and also "3dev" -> "3". This
commit uses this property to sort the workspaces, which makes sense when
persistent workspaces or all-output is specified. This commit also adds
a new configuration option, whether the numeric workspaces come in front
or after workspaces that have non-numeric name.
2020-05-05 09:15:20 +02:00
c602d38c8e
sway/workspaces added current_output CSS class to buttons.
...
All workspace buttons that are visible on the same output as the current waybar can be styled with the `current_output` css class.
This is really only useful in combination with the `"all-outputs":
true`. Then the workspaces that are on the current output can be styled
differently than the workspace on other outputs, while all are visible
in the waybar.
2020-05-04 16:16:09 +02:00
44ed61b2c3
Merge pull request #680 from akobel/master
...
Fix round to 0 or 1 in capacity computation with given full-at
2020-04-27 08:47:22 +02:00
6e946bf872
Add kelvin-scale
2020-04-25 18:44:48 +02:00
e01a081f2f
fix(brightness): amd brightness
2020-04-21 09:11:56 +02:00
df0d34dbd4
Fix round to 0 or 1 in capacity computation with given full-at
2020-04-21 00:58:17 +02:00
2d02ae5e97
Merge branch 'master' into master
2020-04-16 14:43:10 +02:00
d1c4897f31
feat: update man
2020-04-12 18:38:51 +02:00
4a7dd400fe
Merge branch 'master' into on-update
2020-04-12 18:32:19 +02:00
687c50dc13
refactor: remove old stuff
2020-04-12 18:31:07 +02:00
b40cdcb5bd
refactor: call parent update
2020-04-12 18:30:21 +02:00
7c4ea39774
fix: add missing comma
2020-04-06 12:49:41 +02:00
27fbea2b5a
refactor(workspaces): default value unstripped, fix man
2020-04-06 12:42:29 +02:00
f34163a065
Merge pull request #9 from Alexays/master
...
Changes
2020-04-06 12:20:31 +02:00
5c5031fd69
pulse: do not die when a server hasn't been started. wait first.
2020-04-05 11:42:27 -07:00
8e0f3c7ddf
feat: full-at ( #649 )
...
* feat: full-at
* fix(man): typo
2020-04-05 16:56:51 +02:00
8a5c3af949
Merge pull request #8 from Alexays/master
...
Merge Alexays:master into marcplustwo:master
2020-04-05 16:13:56 +02:00
bb2c16386b
feat: format-icon for persistent workspaces
2020-04-04 21:13:25 +02:00
10b152ac3e
fix: process last line, restart-interval
2020-03-26 09:18:47 +01:00
9acf5587fa
refactor(pulseaudio): fallback to default muted format
2020-03-25 22:53:09 +01:00
ff36154c4b
fix: typo
2020-03-25 22:31:04 +01:00
d12ad1128e
fix: man
2020-03-25 22:30:22 +01:00
cb2f5c154c
feat(custon): restart_interval for continuous script
2020-03-25 22:25:30 +01:00
c3cdd516ef
Merge pull request #629 from Xyene/pre-3.4-meminfo
...
fix(memory): provide better free memory approximation on old kernels
2020-03-24 20:57:23 +01:00
19743f3085
fix(memory): provide better free memory approximation on old kernels
...
The approximation should include SReclaimable, and subtract Shmem. To
prevent the parsing code from ballooning in size, this commit also
refactors the parsing into a map.
2020-03-20 17:37:22 -04:00
d405f28622
Indent now uses spaces.
2020-03-13 16:42:05 +01:00
2f975f870a
Added support for absolute device paths for the temperature module.
2020-03-12 22:04:00 +01:00
190b2dd922
pulseaudio: track only the default sink and source
...
When you have multiple sinks (resp. sources), the module used to display
the state of the most recently changed one. This changes remembers the
default sink name, and only records changes to that one.
2020-02-24 11:30:35 +01:00
dd7d78cd60
changes requested
2020-02-23 23:09:05 +01:00
9abe1e2790
Merge branch 'master' into master
2020-02-23 23:00:09 +01:00
2d8dc83480
Merge pull request #598 from layus/sni-watcher
...
Use the same StatusNotifierWatcher for all trays
2020-02-19 14:22:51 +01:00
9a5f5114c4
pulse: track default source/sink changes
2020-02-19 12:28:36 +01:00
047c2929c1
Use the same StatusNotifierWatcher for all trays
2020-02-19 12:06:35 +01:00
543589a97b
Update pulseaudio.cpp
2020-02-16 21:48:22 +00:00
4f8a396692
Fix for 'Network label text not updated properly when formats contain Unicode characters' ( #588 )
2020-02-15 16:51:18 +00:00
e70f8d8730
fix(clock): lower precision of zoned_time to avoid fractional seconds in output
2020-02-06 10:04:22 -08:00
e1215a6d17
Merge pull request #578 from alebastr/ipc-use-after-free
...
fix(sway): resolve destruction dependency between Ipc and SleeperThread
2020-02-06 17:36:11 +00:00
d1f427618f
Cache calendar per clock instance, weekdays properly handle locales.
2020-02-05 11:07:47 -08:00
ae6ca36fa7
fix(sway): resolve destruction dependency between Ipc and SleeperThread
...
Ipc destructor closes socket and thus wakes up SleeperThread which was
waiting for socket data in Ipc::handleEvent.
Ipc::handleEvent then proceeds with sending signal to already destroyed
object, causing heap-use-after-free Address Sanitizer error.
2020-02-04 23:22:43 -08:00
cd2db19267
Detect presence, call nl_langinfo() to get first day of week.
2020-02-03 17:18:34 -08:00
4c40f9c635
Stop using a mutex for guarding CachedCalendar.
2020-02-03 17:18:34 -08:00
218bb3bc2b
Simpify calendar generation, single loop handles both first week and subsequent weeks.
2020-02-02 16:06:27 -08:00
f6b2005687
Cache calendar tooltip text to reduce computations.
2020-02-02 15:59:24 -08:00
ea9591baea
Switch from utfcpp to Glib::ustring for UTF-8 string mangling.
2020-02-02 15:59:24 -08:00
af2528952b
Merge branch 'master' of github.com:skligys/Waybar into temp
2020-02-02 15:58:40 -08:00
527fa982d2
pulseaudio: adapt icon names to form factors
2020-01-31 22:47:26 +01:00
8e05aab4d9
Current month calendar in clock tooltip.
2020-01-31 10:36:40 -08:00
58eb8ad11f
Merge branch 'master' of github.com:marcplustwo/Waybar
2020-01-26 05:35:34 +01:00
c045288ce4
add man page for bluetooth, fix bluetooth race-condition
2020-01-26 05:34:31 +01:00
f9618d30f3
Merge pull request #7 from Alexays/master
...
Merge latest changes from upstream
2020-01-23 17:30:33 +01:00
e3bf6b968c
bluetooth module handles rfkill events instantly
2020-01-23 17:17:29 +01:00
84b671f6b2
Attempt at supporting locale and timezones ( #1 )
2020-01-23 08:27:10 -05:00
6e30b7af3c
Remove duplicate dependency, use current locale
2020-01-23 08:27:00 -05:00
3130a57622
Add timezone support to clock module ( closes #223 )
2020-01-23 08:26:49 -05:00
d85f0e1060
Merge pull request #3 from marcplustwo/addbluetoothmodule
...
Add bluetooth module
2020-01-22 11:44:25 +01:00
89cb9673d4
bluetooth module working
2020-01-22 11:37:47 +01:00
f0dbd8b78d
properly structure rfkill util
2020-01-21 17:48:45 +01:00
626af1ddc1
add rudimentary bluetooth module functionality
2020-01-21 17:04:54 +01:00
b8aeda794c
Merge pull request #2 from marcplustwo/airplane_mode
...
distinguish between wifi disabled and disconnected
2020-01-20 10:46:59 +01:00
2dc4ae78fc
distinguish between wifi disabled and disconnected
2020-01-20 00:35:37 +01:00
8fb3211594
Use PA_PROP_DEVICE_FORM_FACTOR for device icon.
2020-01-13 11:34:33 +01:00
569f40de9b
Keep aspect ratio when scaling tray icons.
2020-01-09 17:27:10 +10:30
129713fe1b
fix(network): add missing include
...
Fixes:
../src/modules/network.cpp:68:3: error: 'assert' was not declared in this scope
68 | assert(starts_with(read, category));
| ^~~~~~
../src/modules/network.cpp:6:1: note: 'assert' is defined in header '<cassert>'; did you forget to '#include <cassert>'?
5 | #include "util/format.hpp"
+++ |+#include <cassert>
6 |
2020-01-07 20:27:31 +01:00
75c6e2e7d5
mpd: add paused format string
2020-01-07 09:15:54 -08:00
1145788ab3
fix(network): display of IPv6 address
2020-01-06 13:15:28 +01:00
c8821a5e7f
fix(Battery): replace spaces w/ dashes
2019-12-30 13:56:34 +01:00
d40cc6f23a
fix(Battery): replace spaces w/ underscores
2019-12-30 13:55:49 +01:00
c885be369e
feat(Network): hide on empty format
2019-12-30 13:46:12 +01:00
0f0765e517
feat(modules): call user on-update if configured
2019-12-05 14:42:36 -08:00
6d5b502bbb
pulseaudio: export desc as a format
...
Signed-off-by: Niv Sardi <xaiki@evilgiggle.com>
2019-11-25 05:16:58 -03:00
7f7ebb5367
fix(workspaces): add int comparison
2019-10-19 16:19:35 +01:00
1e82982dbd
Detect timezone changes
...
Fixes #479 , because upstream does not intend to.
It may be less expensive to do that only once in a while, or to inotify-watch on /etc/timezone, but this is good enough.
2019-10-04 23:25:09 +02:00
048d8d328e
refactor(Battery): ouput 'Plugged' instead of 'Charging' in the fallback
2019-10-03 09:37:37 +01:00
3d1fd4f5ea
change audio scroll bound
...
Change default behavior from 0% - 99% to 0% - 100%.
2019-09-28 18:05:31 -05:00
f4d2ca2736
custom formatter for numbers in 'pow' units format
2019-09-25 12:53:06 +02:00
211b1c2785
fix: no need to wait on start
2019-09-25 09:32:22 +01:00
1d39ef5c8e
Add a disk module
2019-09-25 08:47:33 +02:00
bae83ee4e3
fix: static_cast clamp
2019-09-19 22:07:38 +01:00
52db1e8e68
Merge pull request #467 from jspngh/bugfix/mpd_module
...
Add more locking in mpd module
2019-09-19 22:03:23 +01:00
334bc1e52a
fix(Network): clamp signal strength
2019-09-19 21:59:28 +01:00
e6599d8ed5
modules/mpd: take lock in waitForEvent to prevent SIGABORT
...
+ replaced deprecated MPD_IDLE_PLAYLIST with MPD_IDLE_QUEUE
+ add mutex for periodic_updater
2019-09-19 21:43:12 +02:00
a63bc84918
Add configurable time display for battery module
...
Adds a `format-time` configuration for the battery module so that users
can configure how they want their remaining time to be displayed.
The default format remains the same as before, i.e. `{H} h {M} min`,
but users can choose something like `{H}:{M:02d}` to give an output
like `4:29` if wanted.
2019-09-04 14:43:52 -04:00
36fc8365ee
Merge pull request #446 from bschacht/fix-typo-persistant
...
Fix typo: persistant -> persistent
2019-08-31 21:13:31 +02:00
2646390e28
Fix typo: persistant -> persistent
2019-08-31 19:57:44 +02:00
66f2cbed51
Fix typo
...
ouput -> output
2019-08-31 17:50:56 +00:00
f592e3d38b
Merge branch 'master' into fmt
2019-08-29 11:29:48 +02:00
ceedc689ec
Merge branch 'master' into master
2019-08-29 11:05:55 +02:00
a257126685
Merge branch 'master' into asan-fixes
2019-08-29 11:04:24 +02:00
712424f9a8
Unbreak build with fmtlib 6.0.0
...
In file included from ../src/factory.cpp:1:
In file included from ../include/factory.hpp:4:
../include/modules/clock.hpp:5:10: fatal error: 'fmt/time.h' file not found
#include "fmt/time.h"
^~~~~~~~~~~~
In file included from ../src/bar.cpp:4:
In file included from ../include/factory.hpp:4:
In file included from ../include/modules/clock.hpp:3:
In file included from /usr/include/fmt/chrono.h:12:
/usr/include/fmt/locale.h:19:35: error: parameter type 'fmt::v5::internal::buffer' (aka 'basic_buffer<char>') is an abstract class
const std::locale& loc, buffer<Char>& buf,
^
/usr/include/spdlog/fmt/bundled/core.h:238:16: note: unimplemented pure virtual method 'grow' in 'basic_buffer'
virtual void grow(std::size_t capacity) = 0;
^
In file included from ../src/modules/sni/host.cpp:3:
/usr/include/fmt/ostream.h:22:9: error: expected member name or ';' after declaration specifiers
buffer<Char>& buffer_;
~~~~~~^
/usr/include/fmt/ostream.h:25:19: error: expected ')'
formatbuf(buffer<Char>& buf) : buffer_(buf) {}
^
/usr/include/fmt/ostream.h:25:12: note: to match this '('
formatbuf(buffer<Char>& buf) : buffer_(buf) {}
^
/usr/include/fmt/ostream.h:25:42: error: use of undeclared identifier 'buf'; did you mean 'prettify_handler::buf'?
formatbuf(buffer<Char>& buf) : buffer_(buf) {}
^~~
prettify_handler::buf
/usr/include/spdlog/fmt/bundled/format-inl.h:551:11: note: 'prettify_handler::buf' declared here
buffer &buf;
^
2019-08-29 01:38:54 +00:00
e38df047fd
sway/mode: enable pango markup on supported modes
...
IPC reports {"mode": "mode_string", "pango_markup": bool}.
Use this to conditionally enable pango markup.
2019-08-28 19:48:33 -05:00
01ad3d96d8
fix(tray): pre-create dbusmenu for tray items
...
It seems that dbusmenu is not ready to display menu immediately and
needs some time to sync data via DBus.
Fixes LIBDBUSMENU-GLIB-CRITICAL: dbusmenu_menuitem_send_about_to_show:
assertion 'DBUSMENU_IS_MENUITEM(mi)' failed.
Also fixes initial render of the menu with layer shell popups support patch.
2019-08-27 00:34:00 -07:00
642fd48af1
fix(tray): restore Activate support for compliant SNI implementation
...
Set ItemIsMenu to true by default because libappindicator supports
neither ItemIsMenu nor Activate method and compiant SNI implementations
are expected to reset the flag during initial property fetch.
To be revisited if anyone finds the implementation that has Activate
but does not set ItemIsMenu.
2019-08-27 00:33:59 -07:00
8f9e6c132d
fix(network): stack-use-after-return found by address sanitizer
...
Fixes compilation with clang.
2019-08-27 00:11:40 -07:00
d8b1b0d0af
add support for muted bluetooth audio, fix #420
2019-08-18 16:15:21 +02:00
21a89ac46d
Typo
2019-07-15 12:21:31 +02:00
617b370104
fix(pulseaudio): connect scroll event handler
...
Reconnect the event handler that was removed in commit 527144a
2019-07-06 15:51:00 +02:00
a6c0bc5a52
Fix deadlock on workspace scrolling
...
Make the mutex guard lifecycle finish before the send ipc command
by adding scope around the code.
Fixes #395 .
2019-07-05 20:47:44 -07:00
a6980fca7f
feat: ellipsize modules
2019-06-28 14:16:09 +02:00
bd5146fdcf
fix(Label): ELLIPSIZE all label modules
2019-06-28 13:49:04 +02:00
c916fe258e
fix(network): no need to check family here
2019-06-25 07:55:55 +02:00
c621afb0c4
Merge branch 'master' into clean
2019-06-22 18:15:34 +02:00
ff9d598c16
fix: add proper mutex
2019-06-17 11:39:45 +02:00
05f796158b
fix: typo
2019-06-16 15:13:40 +02:00
527144a440
refactor(pulseaudio): proper scroll override
2019-06-16 15:08:08 +02:00
340ec7be91
refactor: AModule
2019-06-15 14:57:52 +02:00
1b7068e61d
Expose total memory to the formatting directive
2019-06-14 22:48:16 +02:00
dabe2bebbb
feat(sway/window): handle floating nodes
2019-06-14 11:27:40 +02:00
486b5a5d38
fix(sway/window): check output recursively
2019-06-14 10:57:22 +02:00
11bbc3b24d
Fix twitchy scrolling on touchpads ( #381 )
...
Fix twitchy scrolling on touchpads
2019-06-14 10:38:25 +02:00
028b184f7b
fix(workspaces): persistant class with empty outputs
2019-06-12 09:50:33 +02:00
396f7d4525
Workspaces: implement horizontal continuous scrolling
2019-06-11 18:44:54 +02:00
3c9b533997
fix(window): avoid hexpand
2019-06-11 17:57:17 +02:00
ec75be0bc3
fix(Tray): click behaviour
2019-06-11 17:53:16 +02:00
ed4521d113
Workspaces: fix twitchy scrolling on touchpads
...
Previously, any and all scroll events were interpreted as reason to switch
workspaces. This resulted in twitchy behaviour, where the scrolling was
practically unusable.
Now, we pool all scroll values, and only scroll if the value is larger than the
new config option "smooth-scrolling-threshold". If this option is not set, the
behaviour is unchanged.
2019-06-11 17:22:24 +02:00
c2e9ed6091
feat(workspaces): add class to persistant workspaces
2019-06-11 14:08:48 +02:00
a37b4687ff
Revert "refactor(window): we don't need to subscribe workspace events"
...
This reverts commit 648eecdd83
2019-06-11 14:06:31 +02:00
648eecdd83
refactor(window): we don't need to subscribe workspace events
2019-06-07 15:08:33 +02:00
1962caf144
refactor(window): gtk stuff in update method
2019-06-04 17:34:00 +02:00
9dbf057f58
fix(custom): hide on empty format
2019-06-03 09:50:35 +02:00
0b01b35c76
refactor(pulseaudio): only watch changes
2019-05-31 16:21:01 +02:00
fcf2d18a01
refactor: destroy threads first
2019-05-29 17:53:22 +02:00
b05d4cd413
fix(network): retry around all getExternalInterface
2019-05-29 16:17:40 +02:00
9b89fc6470
refactor: disable bar scroll by default
2019-05-28 16:11:33 +02:00
c06725aa69
fix(network): better disconnect handler
2019-05-28 11:21:59 +02:00
5ae5821929
refactor(network): re-add MAX_RETRY in order to detect external interface
2019-05-28 11:08:48 +02:00
74e40432e5
fix(network): linked state
2019-05-28 09:58:48 +02:00
6e69af8967
refactor(custon): avoid useless logic
2019-05-27 00:08:16 +02:00
be2fa743eb
refactor(custon): hide on empty text
2019-05-27 00:05:29 +02:00
6e73c6db61
refactor(network): remove last_ext_iface_
2019-05-26 23:16:09 +02:00
253366baf4
refactor(network): remove useless assignment
2019-05-26 22:40:29 +02:00
ecec02c8be
refactor(network): better events handler
2019-05-26 22:36:26 +02:00
d4ace4b4d8
fix(network): subscribe only wanted family
2019-05-26 20:06:27 +02:00
5fd92b3c28
fix(network): don't check IFF_UP
2019-05-26 19:53:10 +02:00
c0a39f34cd
refactor(network): don't clear ipaddr
2019-05-25 18:02:36 +02:00
07147878a9
refactor(network): code cleaning
2019-05-24 09:49:56 +02:00
85d60f95c4
refactor(network): const methods
2019-05-22 22:20:50 +02:00
755d38d4d6
fix(custom): bad alloc
2019-05-22 19:46:56 +02:00
b673279a43
style: remove non wanted comment
2019-05-22 12:22:56 +02:00
9e1200ae32
refactor: also pass id to custom modules
2019-05-22 12:20:13 +02:00
d24d85bebf
refactor: move label name and id to label contructor
2019-05-22 12:06:24 +02:00
97bd637f5d
refactor(clock): avoid usless time_point_cast
2019-05-22 11:51:33 +02:00
23d4a811db
refactor(clock): avoid usless duration_cast
2019-05-22 11:48:02 +02:00
14ace24a26
style(battery): format
2019-05-22 10:09:05 +02:00
2fa581c7ea
fix(battery): multiple paths
2019-05-22 10:06:54 +02:00
cf3cb4c61f
feat(Battery) Format argument for time to full|empty
2019-05-21 13:44:05 -04:00
00ada46dfc
feat(Battery) Time remaining on tooltip
2019-05-21 13:36:14 -04:00
2db81a6107
fix(Battery) "current" unused and removed
2019-05-21 13:35:39 -04:00
48a58cd979
fix(network): switch between ifaces upon disconnection
2019-05-21 17:38:47 +02:00
7a3febf6a7
fix(pulseaudio): default source format
2019-05-21 14:55:17 +02:00
bb4af295bc
feat(pulseaudio): source info
2019-05-21 14:53:31 +02:00
cf7663153d
fix(pulseaudio): allow to scroll to 0
2019-05-21 09:29:39 +02:00
12a251c3a4
fix(mode): escape text
2019-05-20 20:51:19 +02:00
4accdd4524
fix(Workspace): ordering
2019-05-20 20:46:59 +02:00
50bfe78aed
refactor(tray): improve error handling and add debug logs
2019-05-20 08:00:07 -07:00
afd291a566
fix(tray): Fix glib assertion when old property value is missing
...
xembedsniproxy sets WindowId as 'i' instead of 'u' and DBus::Proxy
ignores incorrectly typed value.
2019-05-20 07:16:08 -07:00
316a9be656
refactor(tray): Use spdlog for SNI::Item error messages
2019-05-20 07:16:08 -07:00
ed240ac105
feat: add warning about tray requirements
2019-05-20 15:21:13 +02:00
232073ca17
Fix clock is always a second off ( #333 )
...
Fix clock is always a second off
2019-05-20 14:45:34 +02:00
5314b74dae
fix: remove workaround
2019-05-20 14:39:49 +02:00
e3879559a2
Merge pull request #330 from Organic-Code/master
...
Adding sway/workspaces:persistant_workspaces
2019-05-20 14:33:31 +02:00
0ec8774a08
Fixing: missing argument for fmt, workspace order
...
Persistant workspaces would reorder upon their first creation
2019-05-20 08:23:42 -04:00
071b4928dc
fix(workspaces): order
2019-05-20 13:31:02 +02:00
7c4d75d428
feat: create new workspace on the wanted output
2019-05-20 13:21:22 +02:00
67593b8c0f
Merge pull request #332 from Organic-Code/enhancement/spdlog
...
Adding spdlog
2019-05-20 12:07:58 +02:00
cff39bc7cf
fix: remove watcher_id fixme comment as fixed on master
2019-05-20 11:56:55 +02:00
f2edc8f965
feat(Watcher): define watcher_id
2019-05-20 11:47:52 +02:00
7b11283b73
Allow formatting memory with used and available memory ( #334 )
...
Allow formatting memory with used and available memory
2019-05-20 11:30:19 +02:00
03e43fb31d
refactor: remove wlroots dependency
2019-05-20 09:49:54 +02:00
5feb478611
Merge branch 'master' into amd_fix
2019-05-19 22:40:47 +03:00
6bf64cd04d
Allow formatting memory with used and available memory
2019-05-19 16:34:42 +01:00
5e43b4f587
Fix clock is always a second off
2019-05-19 13:30:19 +01:00
e8dd1e2d2c
Adding missing ; and _
...
I'll admit I don't have libmpd on my computer
2019-05-18 20:10:42 -04:00
51be97f9aa
Adding spdlog
2019-05-18 19:44:45 -04:00
a00f812cd1
Typo
2019-05-18 18:21:01 -04:00
863e0babd8
Adding break when sorted_workspaces is filled
2019-05-18 12:09:30 -04:00
8ba3052dd1
Adding comments & fixing code style
2019-05-18 12:04:09 -04:00
1a76aa0c8c
Improving ordering
2019-05-18 11:58:01 -04:00
85f177a213
Adding sway/workspaces:persistant_workspaces in config file
...
c.f. https://github.com/Alexays/Waybar/issues/210
2019-05-18 10:58:55 -04:00
ff28de0482
feat(custom): update on click/scroll
2019-05-18 16:07:55 +02:00
67786c32a8
fix(merge): re-add missing code
2019-05-18 15:45:18 +02:00
93a644eec4
Merge branch 'master' into master
2019-05-18 15:42:27 +02:00
aa385e28b6
refactor: execute update on idle
2019-05-18 15:32:40 +02:00
2c1a3d0430
Adding logging
2019-05-18 09:27:47 -04:00
b31a64ad00
Displaying in ko/s and kb/s instead of interval dependant unit
2019-05-18 09:13:00 -04:00
4865a9ad6c
fix(network): reset frequency
2019-05-18 13:57:50 +02:00
3e1c77d158
Add option to disable scroll wraparound on workspaces
2019-05-18 12:15:35 +01:00
d34c3a801c
fix(Network): less updates
2019-05-18 12:27:10 +02:00
794fb12e8c
Adding bandwidth support for network module [linux only]
2019-05-17 23:39:51 -04:00
f743882baa
Merge branch 'master' into amd_fix
2019-05-17 22:33:02 +03:00
9fa0eb7068
more elegant amd fix
2019-05-17 22:30:45 +03:00
43d724ebad
Merge pull request #326 from RX14/rename-bar-scroll
...
Rename the "disable-workspace-scroll" option to "disable-bar-scroll"
2019-05-17 20:24:15 +02:00
0d59f7b7d1
Rename the "disable-workspace-scroll" option to "disable-bar-scroll"
2019-05-17 17:42:11 +01:00
1e95f5d9b6
Fix workspace scroll wrapping off the end of the list
2019-05-17 17:37:24 +01:00
d2d9db23b5
fix: uninitialized bool
2019-05-17 14:23:52 +02:00
d8be72e4b6
refactor: unexport tray watcher
2019-05-17 13:51:55 +02:00
cb2d6e1997
feat(Network): frequency
2019-05-17 11:27:38 +02:00
17291dffdf
fix(Battery): plugged state
2019-05-17 10:59:54 +02:00
2cb70c7324
Merge pull request #322 from RX14/feature/generic-scroll
...
Allow scrolling on the entire bar surface
2019-05-17 10:03:52 +02:00
4d4cadb5ae
refactor: simpler code
2019-05-17 09:59:37 +02:00
d5c1e6f312
Change scroll-step unit to percent
2019-05-17 11:19:58 +08:00
4b4b74db0c
feat(Battery): get icon by state
2019-05-16 17:18:27 +02:00
e12766a656
fix: compilation on some os
2019-05-16 17:09:25 +02:00
31f63398dc
Merge pull request #319 from Alexays/network
...
Network improvements
2019-05-16 14:11:32 +02:00
0a14e7f3ab
feat: ipv6 family
2019-05-16 12:22:08 +02:00
31416ffae6
fix: bar removed
2019-05-16 12:19:47 +02:00
fbe19d886a
fix: drop memberships
2019-05-16 12:16:44 +02:00
9c67150884
refactor: prepare ipv6
2019-05-16 12:14:12 +02:00
f3c467cc46
refactor: remove non wanted headers
2019-05-16 11:27:22 +02:00
45ebee52a6
fix: typo
2019-05-16 11:26:06 +02:00
841576497a
refactor: cleaner events
2019-05-16 11:22:22 +02:00
380fc58f3c
fix(battery): change comparison expr. to assignment
2019-05-15 19:19:00 +02:00
22bf0b161a
fix(Network): do not stop thread
2019-05-15 10:24:35 +02:00
5b3402e110
feat(Battery): plugged status
2019-05-14 15:43:57 +02:00
0968170074
style(media): min-width
2019-05-13 15:40:02 +02:00
362c393b1d
refactor: try/catch, sigc trackable
2019-05-13 15:15:50 +02:00
0c3c548bc0
fix(Window): avoid concurrency
2019-05-13 14:35:45 +02:00
b54160e02f
fix(Tray): add item if not exist
2019-05-13 14:27:01 +02:00
4f1defe6d5
fix(Pulseaudio): avoid handleScroll override
2019-05-13 11:46:12 +02:00
92967c7c06
fix(Label): reverse only battery states
2019-05-13 11:36:34 +02:00
fcb23d3104
feat(temperature): format-icons
2019-05-13 11:31:05 +02:00
62f8af8a39
fix(Window): avoid multiple same classes
2019-05-13 10:56:48 +02:00
80e9ea746b
fix(battery): use path for the / operator
2019-05-12 19:53:22 +02:00
84728f6fab
Merge pull request #313 from apiote/master
...
remove empty and solo classes when they do not apply
2019-05-12 12:13:07 +02:00
7cdde05568
remove empty and solo classes when they do not apply
2019-05-11 20:36:10 +02:00
e343cf4b00
fix(btformat): fixes an issue where btformat was not being correctly detected
2019-05-10 12:07:17 -04:00
e4756cf24e
refactor: don't print an error when a watcher is already present
2019-05-10 14:56:28 +02:00
5bf0ca85ac
refactor: try/catch around json parse
2019-05-09 10:30:54 +02:00
5a44c8c6de
refactor: avoid unneeded json parsing
2019-05-07 13:43:48 +02:00
74137befba
fix(window): title flickers
2019-05-07 13:31:41 +02:00
b75e0bb0d0
refactor: remove useless bar param
2019-05-07 13:21:18 +02:00
dd0ebe117c
chore(cr): cr cleanup
2019-05-03 08:08:55 -04:00
5f0a3063d1
feat(states): add getState to other percent based modules
2019-05-02 22:24:29 -04:00
3bac96945c
Revert "feat(percent): adds a percent class to numeric modules"
...
This reverts commit 82302e58f3b611f7ff6d686d1783b1c32914f7c9.
2019-05-02 22:24:29 -04:00
e158a3e132
feat(states): add generic 'states' to all labels
2019-05-02 22:24:29 -04:00
472363a623
feat(percent): adds a percent class to numeric modules
2019-05-02 22:24:29 -04:00
1a024db03c
fix(idle_inhibitor): overload
2019-05-02 17:51:01 +02:00
5623bbecfe
feat(idle_inhibitor): pass status to click events exec
2019-05-02 16:56:45 +02:00
1e871b2353
refactor: propagate the event further
2019-05-02 16:46:53 +02:00
d027243a19
fix: json thread safe
2019-05-02 14:24:54 +02:00
f8c06b27ae
Revert "feat(Cpu): dynamic fmt args"
...
This reverts commit 2d9bcb1a2d
2019-04-26 21:49:16 +02:00
717a07d584
refactor(Window): simpler conditions
2019-04-26 15:29:54 +02:00
2d9bcb1a2d
feat(Cpu): dynamic fmt args
2019-04-26 14:07:31 +02:00
bb8ff5a99f
feat(Bar): add class depend of window in the workspace
2019-04-25 16:47:51 +02:00
311c34ecbc
feat(Bar): handle widget size changes
2019-04-24 12:37:24 +02:00
90d89fe974
refactor: kill custom modules scripts en destroy
2019-04-23 15:56:38 +02:00
cccf60c30e
fix(Workspaces): fix concurrence and move json parser to ipc client
2019-04-23 11:42:08 +02:00
b50650f63f
fix(mpd): regularly timeout the event listener to prevent timeout
...
The MPD server has a connection_timeout that defaults to 60. If no data
is transferred in this timespan, the connection is closed. If the
connection is closed while the event listener is listening for events,
it will block forever. By timing out the event listening and
re-connecting regularly, we prevent this issue. An option "timeout" has
been added for users that have a lower server connection_timeout than
default. Fixes #277
2019-04-21 10:58:40 +02:00
12e1233d38
Fix compile-time warning of catch by value
2019-04-20 09:16:11 -07:00
160837b900
Ensure no NULL tags are set
...
Because `mpd_song_get_tag` from libmpdclient can return NULL, verify the
value of tag is valid. Otherwise, set a default string of "N/A". Also
adds configuration to specify what this default string should be.
2019-04-20 09:12:30 -07:00
471b5b1ea1
Merge branch 'master' into refactoring
2019-04-19 17:33:18 +02:00
29d8f365f8
refactor(Tray): proper lookup in the default theme
2019-04-19 17:30:40 +02:00
8cf19826aa
fix(Tray): Unexport on exit
2019-04-19 17:03:46 +02:00
cbb6f2a307
refactor(Workspaces, IPC): no more mutex in the workspaces modules, moved to the IPC client for a proper handling
2019-04-19 16:48:02 +02:00
e77c155ede
fix(workspaces): avoid mutex block
2019-04-19 12:11:55 +02:00
66b0420391
fix(mpd): Escape MPD values in the label
2019-04-19 11:11:44 +02:00
42dc0c4c71
fix(ipc): typo
2019-04-19 11:10:48 +02:00
bb1cf7570e
refactor(IPC): use sigc signal
2019-04-19 11:09:06 +02:00
6ed8f94dab
refactor: format code
2019-04-18 17:52:00 +02:00
807ef32357
refactor: format && better output management
2019-04-18 17:47:40 +02:00
3656035c89
fix(mpd): slightly better and safer error handling
2019-04-18 15:57:57 +02:00
0ce8821aec
feat(mpd): Add playing / paused classes
2019-04-18 15:57:57 +02:00
ab43d34a1e
refactor(mpd): Add module name to log messages
2019-04-18 15:57:57 +02:00
22eccc2ac2
feat(mpd): reset player state when connection drops
2019-04-18 15:57:57 +02:00
cd92b475ad
chore: Add clang-format configuration and format MPD module
2019-04-18 15:57:57 +02:00
235997fa73
feat(mpd): Add support for elapsed and total time
2019-04-18 15:55:46 +02:00
80a12d0238
feat(mpd): play/pause on click & stop on right-click
2019-04-18 15:55:46 +02:00
07dab2baec
feat(mpd): Add support for options (random, repeat, etc.)
2019-04-18 15:55:45 +02:00
cbfcec4867
feat(mpd): Add support for play/pause icons
2019-04-18 15:55:45 +02:00
557b786ce0
feat(mpd): Allow for specifying the reconnect interval
2019-04-18 15:55:45 +02:00
8c9dd94670
feat(mpd): Add support for setting tooltip label when disconnected
2019-04-18 15:55:45 +02:00
06aff70e2e
feat: Add basic support for MPD
2019-04-18 15:55:45 +02:00
6d6df4be00
refactor(sni-item): better way to search in default theme
2019-04-17 22:15:18 +02:00
aeaa1927d9
fix: add default_paths on init
2019-04-17 19:23:52 +02:00
346ec68578
refactor: format tray && partial fix for #235
2019-04-17 14:19:04 +02:00
3273ee8b42
fix(Tray): icon size lookup
2019-04-15 12:10:37 +02:00
5828d34fa0
Merge branch 'master' into custom-multiple-classes
2019-04-15 10:58:27 +02:00
bc9a49787a
feat: enable pango markup on sway workspaces
2019-04-15 10:55:44 +02:00
6aee51479d
feat: ability to add multiple classes
2019-04-15 10:18:27 +02:00
57c99dc526
refactor(Tray): also search in default theme
2019-04-11 15:28:38 +02:00
78067462be
fix(Tray): icons update
2019-04-11 15:20:39 +02:00
5870421f84
refactor(temperature): check if file exist on init
2019-04-11 15:08:23 +02:00
8351dea292
refactor(network): process all messages
2019-04-04 11:58:27 +02:00
1f6f443c48
Revert "refactor(network): fix skipped messages"
...
This reverts commit 1ccf372f8e
2019-04-01 11:41:43 +02:00
7fac483530
fix: don't bind RTMGRP_IPV(4|6)_ROUTE
2019-03-31 16:33:01 +02:00
3a8cd91cc0
Revert "refactor: partial revert of 1ccf372f8e9d74cb18e92220c18a0729832fe69e"
...
This reverts commit 949a4ecf2e
2019-03-30 09:20:28 +01:00
949a4ecf2e
refactor: partial revert of 1ccf372f8e
2019-03-30 09:03:31 +01:00
5a2b5624dc
feat(tray): process tray icon update signals
2019-03-29 18:40:28 -07:00
82fcee33b3
refactor(tray): use Gio::DBus bindings in SNI Item class
2019-03-29 18:28:29 -07:00
842e8501f9
fix(tray): free icon data on pixbuf update
2019-03-28 10:52:25 -07:00
55a6e4907b
feat(custom): allow icon selection based on json alt attribute
2019-03-26 00:35:49 +01:00
5144426f0e
fix(workspace): scroll direction
2019-03-25 11:55:01 +01:00
3eb901f800
Escape ESSID text before interpreting as pango
...
Fixes #240 .
2019-03-24 03:11:54 +00:00
47142a61ae
feat: allow waybar to be positioned on left/right
2019-03-22 12:25:05 +01:00
1f924c9c06
Merge branch 'master' into feat-rtsignal
2019-03-18 19:04:11 +01:00
38fa7ceab1
add signalhandler for module update
2019-03-18 18:46:44 +01:00
22cddc5e26
refactor(workspaces): scroll output aware
2019-03-18 14:44:07 +01:00
1ccf372f8e
refactor(network): fix skipped messages
2019-03-18 11:07:36 +01:00
6fc06fe9db
Merge branch 'master' into pulseaudio-ci-icon-lookup
2019-03-15 09:41:40 +01:00
9ad80849b1
fix(pulseaudio): Avoid allocation of string vector on every call of getPortIcon()
2019-03-14 18:35:16 -07:00
492d151079
fix(pulseaudio) use case-insensitive comparison for icon lookup
2019-03-14 18:08:12 -07:00
00176c9514
fix(sway): ipc client crash when compiled with -D_GLIBCXX_ASSERTIONS
...
reserve() does not change string size and any access beyond data() + size() is UB
2019-03-14 17:53:45 -07:00
6d2dcd8ac7
fix(temperature): default thermal zone
2019-03-14 14:01:10 +01:00
7ae549dc9e
Add temperature module
2019-03-13 13:35:43 +01:00
973cec1713
feat(idle): add status class
2019-03-10 10:29:06 +01:00
94d7b083c5
fix(Pulseaudio): switch case
2019-03-08 15:30:41 +01:00
ef88f0a223
fix: clock rounding
2019-03-07 12:34:21 +01:00
67c756b28e
Merge branch 'master' into idle_inhibitor_bugfix
2019-03-04 11:19:14 +01:00
80ef63791d
[bugfix] idle_inhibitor handles click events correctly
...
- Declare event handler in ALabel virtual so the idle_inhibitor can
overriding them
- Handle the right click event in idle_inhibitor and call ALabel handler if needed
2019-03-03 22:02:34 +01:00
a9f680b06e
Add custom tooltip format for network module
2019-03-03 21:35:35 +01:00
737da3615f
resolves #205
2019-03-03 21:35:32 +11:00
79b0367e6c
feat(custom): escape option
2019-03-01 17:03:01 +01:00
39de8e544c
Disable backlight module if no backlight found
2019-02-28 19:50:57 -07:00
0271e9bc1a
Revert "fix: Escape user controlled input"
...
This reverts commit 7247360e29
2019-02-28 19:30:27 +01:00
6633e34bbd
Merge branch 'master' into custom_alt
2019-02-26 12:18:34 +01:00
c1295c8fd6
Fix crash when monitor unplugged
...
`Backlight#devices_` was being destructed before
`Backlight#udev_thread_`. Also check if thread is still running after
`epoll_wait`
2019-02-25 20:05:44 -07:00
39bf403505
feat(custom): Add field for additional data to json
2019-02-25 22:04:09 +01:00
7247360e29
fix: Escape user controlled input
2019-02-25 18:28:56 +01:00
63e97df9ff
fix(backlight) Allow format-alt
2019-02-24 22:15:41 +01:00
7245fb5d0a
Added clock tooltip with optional alternate format
2019-02-24 09:25:34 +01:00
c2ed0cb832
Add the possibility to disable the tooltip
2019-02-22 16:58:36 +01:00
d708ce2be9
Add idle inhibitor module
2019-02-22 16:55:46 +01:00
83a6475510
feat: can disable tooltip
2019-02-22 11:35:47 +01:00
afbf2de1b9
Merge branch 'master' into feature/module-brightness
2019-02-21 15:29:17 +01:00
8bfcb106c0
style: comment about workspace hover effect
2019-02-18 12:30:41 +01:00
875306804c
Add backlight module
...
Monitor the backlight level via udev. Poll every `interval` as well,
in case backlight udev events aren't supported.
2019-02-17 15:29:49 -07:00
6bf4f65228
fix: two finger scroll
2019-02-16 09:56:53 +01:00
0c9edb0c4b
fix(custom): check exist_status in endless script before clean the output
2019-02-16 09:48:27 +01:00
3e18673451
fix: remove bluetooth class on else
2019-02-12 17:55:50 +01:00
d0370acb21
refactor(network): better network disconnection
2019-02-11 19:06:39 +01:00
aeec80f375
fix(Tray): big icon
2019-02-07 13:34:30 +01:00
dc9fe04d11
refactor: add retry to get external interface
2019-02-06 10:33:12 +01:00
93173851d3
fix(Workspaces): index
2019-02-02 12:07:59 +01:00
add9e925f4
fix(Workspaces): button order
2019-02-02 00:36:52 +01:00
0ddcf26a45
feat: output configuration
2019-02-01 21:45:59 +01:00
6d03d9f6a9
fix(window): Fix #154
2019-01-27 11:59:07 +01:00
ce6816737c
fix(window): Ignore waybar
...
With this, the window title waybar will be ignored so it wont flicker as decribed in #148
2019-01-26 19:02:11 +01:00
eace8c549f
fix(Network): format-alt
2019-01-13 22:36:37 +01:00
f8116132a7
fix(Workspaces): check thread is running before parse response
2019-01-13 22:23:09 +01:00
171e0e5ae3
revert: don't disable seq check
2019-01-13 22:22:22 +01:00
30781757e3
revert: prefer nl_send_sync
2019-01-13 22:22:22 +01:00
800d2f388e
refactor(network): proper signal strength type
2019-01-13 22:22:22 +01:00
1647e31b48
refactor: free netlink message
2019-01-13 22:22:22 +01:00
399f61df98
refactor: proper modules destruction
2019-01-13 22:22:22 +01:00
8ea0659ee2
Remove ws index from sway ws names
2018-12-28 09:36:02 -08:00
b4d38294a7
Fix typo
2018-12-27 16:03:29 -08:00
4698c9d2cf
chore(custom): Change int conversion
2018-12-26 11:35:58 +01:00
11c98f13e3
feat(custom): Add format-icons to custom module
...
This commit allows custom modules (json only) to set a percentage. This can be displayed either by using {percentage} or by using {icon} with format-icons set.
2018-12-26 03:52:05 +01:00
ad638357b5
feat(network): Use Signal Strength for format-icons
2018-12-25 14:17:34 +01:00
de0ee9fcb2
fix(battery): adapter status
2018-12-24 12:17:07 +01:00
755fad6bc3
fix(battery): typo
2018-12-24 08:50:58 +01:00
87e55ea993
feat(battery): check adapter online as fallback when battery status report unknown
2018-12-24 08:37:10 +01:00
3b8bfb08a4
fix(network): typo
2018-12-22 14:00:56 +01:00
a4062455cd
fix(pulseaudio): return puleseaudio port string if unknown
2018-12-20 09:54:10 +01:00
b554094c7e
feat: args && class id
2018-12-18 17:30:54 +01:00
66ad2864c2
fix(Pulseaudio): use markup
2018-12-17 09:00:40 +01:00
c7b0639f32
fix(workspaces): check thread is running
2018-12-09 10:49:28 +01:00
0acc50264e
fix(custom): failed getline after closed pipe
2018-12-08 13:57:56 +01:00
1b13f9e38c
fix(custom): close endless scripts
2018-12-08 12:58:47 +01:00
7befd27059
fix: clock interval
2018-12-04 09:38:08 +01:00
812a7a9861
fix: typo
2018-12-03 11:13:56 +01:00
1d96d57b75
feat: warn user about stopped endless custom module
2018-12-03 09:35:10 +01:00
691fb88057
refactor(modules): const bar
2018-12-01 00:10:41 +01:00
8e93fd3ae0
revert: Update to new Sway IPC protocol
2018-11-29 09:50:00 +01:00
3a5a470d90
Update to new Sway IPC protocol
2018-11-28 22:27:06 +00:00
a123711a8d
fix(network): disconnected forced interface
2018-11-25 21:32:50 +01:00
391a7de94a
fix(window): escape window name
2018-11-25 15:21:00 +01:00
2aed121903
Allow custom plugins that don't execute anything
2018-11-24 17:24:02 +01:00
08bfdda4cb
revert(network): wait interface
2018-11-24 16:01:22 +01:00
4cc48b3cfd
fix(client): catch error on update
2018-11-24 11:13:52 +01:00
2e1f8b2fc5
fix(network): check len of netlinkResponse
2018-11-23 17:52:10 +01:00
686bc4828e
refactor(network): only get info when there is an interface
2018-11-23 17:46:14 +01:00
f6c2a8d9b7
fix(network): free the message instead of the socket
2018-11-23 17:42:26 +01:00
baa7f52e21
refactor(network): wait for new address
2018-11-23 16:04:29 +01:00
2b05b8e69a
chore: v0.2.2
2018-11-23 12:03:23 +01:00
ad7400d5ce
refactor(ALabel): add interval
2018-11-23 11:57:37 +01:00
36652158ad
refactor(tray): more cpp binding
2018-11-23 10:46:58 +01:00
0b1b0eb1a7
feat(tray): multiple hosts
2018-11-22 16:20:49 +01:00
ba79b4d397
refactor(tray): cleanup and fixes
2018-11-22 15:47:23 +01:00
bd62c4cbc5
feat(Label): use set_markup
2018-11-21 20:49:09 +01:00
b3559328f1
fix(window): ellipsize
2018-11-20 23:24:33 +01:00
69fceb1c92
fix(tray): sigsev on click when multiple icons is available
2018-11-16 12:01:03 +01:00
e42fae32ab
feat(network): network info interval
2018-11-16 10:02:12 +01:00
c910767378
refactor: remove usless using
2018-11-15 14:48:49 +01:00
94b9f0a399
feat(cpu): add both usage and load
2018-11-15 14:44:43 +01:00
1665003d23
fix: sigsev
2018-11-14 19:14:51 +01:00
75cc1bc318
refactor(network): codestyle and error handling
2018-11-14 10:31:17 +01:00
5c66b1a770
feat(network): display ip address and subnetmask
2018-11-13 21:31:26 +01:00
e1d98f0ad9
fix(cpu): show correct load
...
feat(cpu): show cores in tooltip
2018-11-11 03:11:32 +01:00
7222668326
refactor: disable battery timer stop on inotify event for now
2018-11-09 23:02:46 +01:00
315e2defde
Merge pull request #93 from Robinhuett/pulseaudio_scroll
...
Add config option for volume change scroll step size
2018-11-09 22:55:51 +01:00
45bb8b1a1f
refactor: simpler memory code
2018-11-09 22:55:25 +01:00
e21df5ae36
Add config option for volume change scroll step size
2018-11-09 22:48:27 +01:00
9ea0815dea
Use ifstream to reaad /proc/meminfo
2018-11-09 16:24:13 +01:00
6b62079d8a
rewind stream instead of opening a new one
2018-11-09 00:17:30 +01:00
ac0963c608
Use /proc/meminfo for Memory module
2018-11-08 21:09:56 +01:00
adcd956c24
Fix workspaces not being removed from bar when moved to another output
2018-11-05 20:59:28 +01:00
168415440f
Fix clicking and scrolling through workspaces
...
The way waybar used the workspace "num", clicking a workspace called "1:
something" resulted in going to a newly created workspace called "1",
because the workspace ipc command expects the workspace name, not its number.
2018-11-05 20:16:19 +01:00
5ece0d98ee
Merge pull request #78 from mithodin/filesystem-experimental
...
add option for when filesystem still lives in the experimental namespace
2018-11-03 13:00:04 +01:00
25f31b19f6
formatting is hard.
2018-11-02 22:50:01 +01:00
123ce083b4
fix typo and initialize old_status_
2018-11-02 22:08:55 +01:00
0522577fe5
make status and state fully configurable formats
2018-11-02 22:04:43 +01:00
b6cad05489
fix formatting
2018-11-02 21:13:57 +01:00
236be90c2f
add option for when filesystem still lives in the experimental namespace
2018-11-02 20:59:41 +01:00
9c57df505c
Add class for full battery and give option to interpret unknown as full
2018-11-02 19:41:00 +01:00
9b201c77d7
feat: battery states && format-full/charging
2018-11-02 11:23:29 +01:00
e23fbd0add
Added return-type json to custom module
2018-11-01 00:40:44 +01:00
341d3300fa
Custom modules can control tooltip and CSS class
2018-10-30 21:28:31 +01:00
c3e185546d
Merge pull request #68 from harishkrupo/master
...
Add configuration options for widgets on mouse events
2018-10-30 16:32:37 +01:00
3e34137ac7
pulseaudio: Change volume on scroll event
...
Subscribe for mouse scroll events on the pulseaudio widget
and change volume when event is received.
Scroll up increments the volume and scroll down decrements it.
These events are only subscibed when there are no user defined
commands present for them.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
2018-10-30 20:53:43 +05:30
4c8621c7a5
Added second warning stage to battery module
...
Also naming is a bit more consistent
2018-10-30 16:23:36 +01:00
a042eea384
Add module to show sway binding mode
2018-10-30 13:39:30 +01:00
c9a8a07976
fix(window): title on new workspace
2018-10-29 21:52:53 +01:00
daf613f8ca
feat: add debug about tray beta
2018-10-28 08:43:48 +01:00
ed3e4b1395
fix(pulseaudio): check active_port is set
2018-10-27 11:23:43 +02:00
a55a1ae866
fix(tray): icons size
2018-10-26 14:53:39 +02:00
07d8dfb3d6
feat(tray): spacing config
2018-10-26 12:08:50 +02:00
5010227e6b
fix(tray): icons
2018-10-26 11:59:03 +02:00
adc38c3dfe
feat(sni): set protocol version
2018-10-26 10:56:45 +02:00
b10907ee44
refactor: remove useless code
2018-10-26 10:39:25 +02:00
0c9699b076
fix: check before set is host registered
2018-10-26 10:27:15 +02:00
f20441fa92
refactor: simpler sni naming
2018-10-26 10:05:54 +02:00
3f269ff463
fix: check json::value type
2018-10-26 09:27:16 +02:00
9fae5efc06
feat: use interval thread until got inotify event
2018-10-25 17:39:15 +02:00
7f1f217d84
feat: multiple config per modules
2018-10-25 17:30:26 +02:00
4626cbef63
fix(pulseaudio): round volume
2018-10-25 13:57:35 +02:00
85f845ca43
refactor: remove debug
2018-10-25 13:49:30 +02:00
0e6147b644
Merge branch 'master' into tray-gdbus
2018-10-25 11:36:35 +02:00
c912d8c86a
fix(workspaces): index
2018-10-25 10:22:11 +02:00
137c5fb712
fix custom intervals causing cpu to go mental
2018-10-23 00:06:46 +01:00
5a6e05dcde
feat: workspaces index
2018-10-22 10:41:52 +02:00
a13ce6e227
Merge branch 'tray-gdbus' into tray-gdbus
2018-10-05 21:20:36 +02:00
091b460d03
feat(Tray): handle click
2018-10-04 18:53:50 +02:00
56e55fa4aa
fix: remove TODO
2018-10-04 18:53:50 +02:00
dc799adf45
feat(Tray): icon pixmap
2018-10-04 18:53:50 +02:00
75c9477aa8
feat(Tray): handle item unregister
2018-10-04 18:53:50 +02:00
75cf1d70fd
feat(WIP): tray
...
feat(wip): tray
feat(wip): tray
feat(WIP): gdbus
feat(WIP): tray
2018-10-04 18:53:50 +02:00
9a333088e5
Merge branch 'tray-gdbus' of github.com:topisani/Waybar into tray-gdbus
2018-10-04 18:47:06 +02:00
b231054b69
Merge remote-tracking branch 'origin/master' into tray-gdbus
2018-10-04 18:04:36 +02:00
108b1092e5
WIP sni dbus-menu support.
2018-10-04 18:03:01 +02:00
0e8b3f71b8
fix(Custom): pclose if continuous script end
2018-09-18 23:21:08 +02:00
00959c7d65
feat(Custom): handle continuous script
2018-09-18 23:15:37 +02:00
d5d620e72d
feat(Window): handle closed window
2018-09-18 21:16:35 +02:00
d914429194
feat(Workspaces): format
2018-09-18 20:58:11 +02:00
fcdb8387af
feat(Tray): handle click
2018-09-17 23:32:05 +02:00
3e2e1a7018
fix: remove TODO
2018-09-15 19:01:28 +02:00
86958f264e
feat(Tray): icon pixmap
2018-09-15 19:01:28 +02:00
20ff2cab9e
feat(Tray): handle item unregister
2018-09-15 19:01:28 +02:00
fc6e42d748
feat(WIP): tray
...
feat(wip): tray
feat(wip): tray
feat(WIP): gdbus
feat(WIP): tray
2018-09-15 19:00:45 +02:00
0abaaf2f7f
style: fix
2018-09-10 11:16:57 +02:00
de5df09fcd
fix(Custom): loop script block main loop
2018-09-05 19:20:19 +02:00
7020af7653
feat(Workspaces): urgent, visible, focused icons
2018-09-05 00:16:56 +02:00
0eee8eade7
feat(WIP): tray
...
feat(wip): tray
feat(wip): tray
feat(WIP): gdbus
feat(WIP): tray
2018-09-02 17:29:16 +02:00
6dd9b5ccc4
feat(Pulseadio): port icons
2018-08-29 23:50:41 +02:00
d0933ab50f
fix(thread): check before detach
2018-08-29 21:07:58 +02:00
9a1b8bb831
fix(Custom): only set id when getting an output
2018-08-28 11:10:36 +02:00
53956d9d18
feat(ALabel): Toggleable labels
2018-08-27 01:36:25 +02:00
c8ca8b3725
fix(Custom): hide label when exec-if failed
2018-08-26 21:41:34 +02:00
0ad2bc7516
refactor(Network): clean nl socket
2018-08-24 15:32:06 +02:00
0dba3abc1d
fix(custom): do not take the custom module ref
2018-08-21 10:50:09 +02:00
49232eed8d
Clean ( #31 )
2018-08-20 14:50:45 +02:00
b7e3d10fb7
revert(workspaces): ipc command out of update func
2018-08-20 00:19:27 +02:00
8ce33e0c64
fix(window): pick only con title
2018-08-19 20:37:33 +02:00
52a4e761a8
fix(workspaces): avoid useless mutex lock
2018-08-19 13:43:00 +02:00
6705134034
Handle screens disconnection ( #29 )
2018-08-19 13:39:57 +02:00
ce50a627be
refactor: move command execution into their own file
2018-08-18 17:54:20 +02:00
b794ca63d1
feat(custom): exec-if
2018-08-18 17:27:40 +02:00
38ede5b3d5
refactor(ipc): clean
2018-08-18 16:01:56 +02:00
27dfffa4e3
refactor: style issue
2018-08-18 15:05:18 +02:00
b1fd4d7b82
feat(modules): generic label module to allow max-length on all labels
2018-08-18 11:43:48 +02:00
d280f5e8bd
Network detect ( #26 )
2018-08-17 14:24:00 +02:00
0371271465
fix(custom): hide first
2018-08-16 17:59:45 +02:00
8768183f3d
fea(workspaces): add disable-scroll config
2018-08-16 17:12:45 +02:00
e4f35d7ca0
fea(custom): add max-length config
2018-08-16 17:09:51 +02:00
57f3a01a5b
refactor: remove assert
2018-08-16 15:41:09 +02:00
6635548d3e
Style code ( #25 )
2018-08-16 14:29:41 +02:00
3fdc50163d
feat(window): update when window title change
2018-08-16 00:02:57 +02:00
a9246a09eb
feat(workspaces): add a option to show all workspaces from all outputs
2018-08-15 22:19:17 +02:00
008856cbb8
feat(clock): allow choose interval
2018-08-15 21:00:04 +02:00
608b791ac1
refactor(clock): use fmt::localtime
2018-08-15 20:53:27 +02:00
f94598c138
feat(sway): add focused window name
2018-08-15 20:17:17 +02:00
be66cc2dd1
feat(workspaces): add urgent, visible class
2018-08-15 15:03:51 +02:00
52e7b6148b
feat(workspaces): add class to button when label is a icon
2018-08-15 14:58:55 +02:00
e3e099f836
feat(workspaces): icons
2018-08-15 14:48:08 +02:00
767d9dd5b4
fix(workspaces): buttons iterator
2018-08-15 14:30:01 +02:00
cee031d2fa
Workspaces scroll event ( #19 )
2018-08-14 11:26:06 +02:00
18c7ad0026
fix(workspaces): lock mutex inside click callback
2018-08-13 23:43:35 +02:00
1555cb71e1
feat(pulseaudio): volume icons
2018-08-13 22:33:07 +02:00
ea9a08d473
refactor(workspaces): listen ipc event
2018-08-13 21:23:43 +02:00
68f9ea3065
fix(battery): add check for sys files
2018-08-13 17:11:47 +02:00
a423f7032d
Battery event ( #18 )
2018-08-13 14:05:13 +02:00
b381e2a596
feat(battery): capacity icons
2018-08-11 13:15:31 +02:00
67fa8bd4c3
style(battery): animates background when battery is in a critical state
2018-08-11 13:03:35 +02:00
6ff296a4b0
refactor(bar): prefer standard unique_ptr
2018-08-11 12:49:28 +02:00
04183dc696
refactor(modules): prefer sigc::mem_fun
2018-08-11 02:40:13 +02:00
14053d61fc
feat(workspace): catch ipc errors
2018-08-11 02:09:39 +02:00
424ebb3c9b
feat(workspace): only show workspaces which are on same output as bar
2018-08-11 00:32:59 +02:00
2512d51564
fix(gtk): use idle to avoid mutex
2018-08-10 23:21:21 +02:00
679aafa9e8
refactor(pulseaudio): remove signal init
2018-08-10 18:16:11 +02:00
9b2c551f2e
fix(battery): typo
2018-08-10 18:04:48 +02:00
d728de2dd7
fix(battery): check for battries :(
2018-08-10 18:02:12 +02:00
4d3879f26f
refactor: avoid useless has_class check
2018-08-10 17:05:12 +02:00
e16cce646b
feat: add custom module to allow execution of external script
2018-08-10 16:26:46 +02:00
c52b0c5f03
feat(network): add signal strength percentage
2018-08-10 10:45:13 +02:00
aab9625182
fix(network): copy all characters
2018-08-10 10:22:50 +02:00
f810713570
refactor(pulseaudio): use pulseaudio thread rater than cpp
2018-08-10 00:34:13 +02:00
291267711a
feat(pulseaudio): add muted class
2018-08-10 00:02:50 +02:00
7ccb76935d
feat: add pulseaudio module
2018-08-09 23:55:38 +02:00
11fab436b9
Merge pull request #5 from Alexays/signalDbm
...
feat(network): signal strength in dBm
2018-08-09 22:38:13 +02:00
4594f7b456
Merge pull request #4 from Alexays/fix-memory-usage
...
Fix formula used to compute RAM used and available
2018-08-09 22:05:47 +02:00
c276c3b907
feat(network): signal strength
2018-08-09 22:05:15 +02:00
7d3c0b0bb9
Clarify variable names and percentage formula in memory module
2018-08-09 21:47:28 +02:00
6ccb029097
fix: remove debug
2018-08-09 21:14:57 +02:00
98060310c6
Fix formula used to compute RAM used and available
2018-08-09 21:14:20 +02:00
23f48cb8b7
refactor: prefer static methods
2018-08-09 20:22:01 +02:00
03132bd219
feat: add tooltip to battery and memory
2018-08-09 17:30:23 +02:00
731a352b41
feat: add network module
2018-08-09 16:38:24 +02:00
b8917e9973
feat(config): interval for cpu and memory modules
2018-08-09 14:34:39 +02:00
dc4e4860bd
feat(config): format modules
2018-08-09 13:30:11 +02:00
45832fcbe3
fix(workspaces): reorder child if needed on focus
2018-08-09 12:25:01 +02:00
39a0ae04a8
feat: basic config file
2018-08-09 12:05:48 +02:00
4cec0f390b
fix(battery): proper handle multiple
2018-08-09 11:21:08 +02:00
4659f04454
fix(workspaces): proper order workspace
2018-08-09 11:12:46 +02:00
b987668f97
style: clean class
2018-08-09 10:50:16 +02:00
d5bfc754c6
feat: cpu module
2018-08-09 01:54:33 +02:00
17fc77cb5e
feat: memory module
2018-08-09 01:42:52 +02:00
81b5c37d86
refactor(workspaces): cleaner handle resume
2018-08-09 01:14:06 +02:00
c1e2735314
feat: add idle protocol to avoid update workspace when idle
2018-08-09 01:10:07 +02:00
193bd8a79a
fix(bar): remove focused window code
2018-08-09 00:41:39 +02:00
e5b5be3b37
feat(workspaces): add thread sleep
2018-08-09 00:33:33 +02:00
fcb6a9aa8b
feat: init repo
2018-08-08 23:54:58 +02:00
Grant Moyer
Lars Christensen
Alex
Roosembert Palacios
Patrick Nicolas
dmitry
John Helmert III
Anthony PERARD
Maxim Baz
Amanieu d'Antras
Max1Truc
Patrick Hilhorst
Gabe Gorelick
David96
Matthias Richter
Sefa Eyeoglu
jgmdev
Petri Lehtinen
nullobsi
Antonin Reitz
Genesis
Aleksei Bavshin
Andy Russell
Thomas Sarboni
Martin Pittermann
Kamus Hadenes
Ocisra
ocisra
Marek Černoch
sjtio
Andrea Scarpino
Harit Kapadia
Till Smejkal
Pedro Côrte-Real
Thomas Hebb
Daniel De Graaf
Arnaud Vallette d'Osia
Jordan Leppert
Laurent Arnoud
Flakebi
nikto_b
Joseph Benden
Ole Martin Handeland
nikto_b
Érico Rolim
lrhel
Thorben Günther
koffeinfriedhof
Tamir Zahavi-Brunner
MusiKid
wjoe
NotAFile
Eivind Uggedal
Michael Rodler
Jannusch Bigge
Isaac Freund
Tudor Brindus
Till Smejkal
Jan Beich
phosit
Alexander Kobel
Marc Radau
JohnHolmesII
BoostCookie
BoostCookie
Guillaume Maudoux
Marc
Skirmantas Kligys
Andreas Stührk
Michael Cordover
PlusMinus0
Louis des Landes
Luca Weiss
Cole Helbling
Moritz Jordan
Jordi Pakey-Rodriguez
Niv Sardi
Hetian Huo
Jonas Spanoghe
Benjamin Cheng
Birger Schacht
Birger Schacht
xPMo
tufteddeer
Joel Nordström
crwxrws
sheenobu
Nenad Stojanovikj
Max Reppen
Lucas Lazare
isheshukov
RX14
Olegs Jeremejevs
Jørgen Bele Reinfjell
Adam Pioterek
Dan
Dan
Minijackson
Sibren Vasse
José Ribeiro
hoellen
hoellen
Groggy
Jonas
John Doe
Ian Hattendorf
Robinhuett
Piet van der Loo
Caleb Bassi
Cédric Chépied
Ryan Walklin
David96
Lucas L. Treffenstädt
Harish Krupo
dangerousdan
Tobias Pisani
topisani
Thomas Plaçais