Commit Graph

402 Commits

Author SHA1 Message Date
Simon Ser 98d949718c backend/drm: strip alpha channel if necessary
Some primary planes don't support ARGB8888, they only support XRGB8888
(for instance on older Intel hardware). The DRM backend would fail to
initialize.

When that's the case, try to allocate buffers without an alpha channel.
2020-04-29 08:32:06 +02:00
Scott Anderson 321537ee92 backend/drm: don't allow legacy to use direct scanout 2020-04-28 09:54:52 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson be90062c51 backend/drm: don't have fallback atomic commits
This is just doing atomic incorrectly.
2020-04-28 09:54:52 +02:00
Scott Anderson 8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Simon Ser 50ade3671f output: check for buffer size compatibility in common code
Instead of checking for buffer size compatibility in each backend,
centralize the check in wlr_output itself.
2020-04-10 15:52:20 +02:00
Simon Ser 5f092c55d1 output: fix blurred hw cursors with fractional scaling
The scaling factor was being implicitly cast to an int.

Closes: https://github.com/swaywm/sway/issues/4927
2020-04-10 15:10:12 +02:00
Simon Ser 9acca4fc73 backend: set EGL_RENDERABLE_TYPE and EGL_SURFACE_TYPE
Ensure these are set to the correct value.
2020-04-09 00:15:25 +00:00
Simon Ser 507d9bc19e Add wlr_output_impl.rollback
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.

However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.

The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].

When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.

Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.

This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.

[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08 17:33:00 +02:00
Simon Ser d3bd5f2a7b backend: reset EGL surface after buffer swap
This prevents GL commands to affect a previously current EGL surface
after a buffer swap.
2020-04-08 17:33:00 +02:00
Simon Ser 6977f3a843 output: check buffer in wlr_output_test
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.

This brings the wlr_output API more in line with the KMS API.

This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
2020-04-08 16:31:21 +02:00
Simon Ser e041158988 output: introduce wlr_output_test 2020-04-08 16:31:21 +02:00
Simon Ser 6595db6409 buffer: add a release event
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
2020-04-02 15:03:43 +02:00
Filip Sandborg 5ee52a3ab9
Fix uint32 overflow in fill_empty_gamma_table on Icelake platform
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-15 18:41:12 +01:00
Simon Ser 52c67284e2 backend/drm: add support for adaptive_sync_enabled
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06 21:32:58 +01:00
Simon Ser 348f52b5fc output: remove wlr_output_impl.schedule_frame
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.

There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.

However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:

- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
  screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen

With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.

This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.

References: https://github.com/swaywm/wlroots/issues/1925
2020-03-04 03:22:19 +01:00
Rouven Czerwinski 144d2041ad backend/drm: remove overzealous finish_drm_surface
The previous PR was overzealous in adding a finish_drm_surface call
which was also done by the caller. Remove the call and also move the
comment to the correct code location.
2020-01-24 19:57:09 +01:00
Rouven Czerwinski f0594fb732 backend/drm: add env variable to disable modifiers
In some cases modesets fail if the planes are initialized with
modifiers. Since in this case possibly all planes need to reinitialized,
which is not possible in the current wlroots design, add an environment
variable for affected users.
2020-01-24 19:43:51 +01:00
Simon Ser 7c05933e51 backend/drm: prevent outputs from being destroyed on commit
This would happen if initializing the renderer fails. Instead, we just
mark the output as disabled.

References: https://github.com/swaywm/sway/pull/4917
2020-01-17 06:49:31 -07:00
Simon Ser 21e1953b61 backend/drm: don't modeset with a NULL mode after TTY switch
This fixes a segfault in drm_connector_set_mode (mode = NULL).

This happens because we set wlr_output.enabled to true if the connector
is attached to the CRTC. When the user disables an output in the
wlroots-based compositor, switches to another VT (enabling the output),
then switches back, wlroots sets wlr_output.enabled to true but
wlr_output.current_mode is NULL.

We should consider not reading properties from KMS after a TTY switch,
disabling all connectors. However this may result in flickering (outputs
being disabled then re-enabled).

Closes: https://github.com/swaywm/wlroots/issues/1874
2019-12-30 14:32:37 -07:00
Simon Ser 8fc16890c7 output: refuse to commit a buffer or modeset a disabled output
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30 11:21:11 -07:00
Simon Ser f0781cd792 backend/drm: modeset before enabling an output
This saves one modeset in case the previous mode is different.
2019-12-30 11:21:11 -07:00
Simon Ser 5d1ba0f446 output: re-introduce atomic mode, enabled, scale and transform
This reverts commit 01f903874b and re-applies
commit ee5f98ad49.

Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue)
See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR)
See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-30 11:21:11 -07:00
Simon Ser 4da4a15d6b output: add description
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.

References: https://github.com/swaywm/wlroots/issues/1623
2019-12-29 12:35:22 -05:00
Scott Anderson cff1c2f740 meson: Various improvements
Bumps minimum version to 0.51.0

- Remove all intermediate static libraries.
  They serve no purpose and are just add a bunch of boilerplate for
  managing dependencies and options. It's now managed as a list of
  files which are compiled into libwlroots directly.

- Use install_subdir instead of installing headers individually.
  I've changed my mind since I did that. Listing them out is annoying as
  hell, and it's easy to forget to do it.

- Add not_found_message for all of our optional dependencies that have a
  meson option. It gives some hints about what option to pass and what
  the optional dependency is for.

- Move all backend subdirectories into their own meson.build. This
keeps some of the backend-specific build logic (especially rdp and
session) more neatly separated off.

- Don't overlink example clients with code they're not using.
  This was done by merging the protocol dictionaries and setting some
  variables containing the code and client header file.
  Example clients now explicitly mention what extension protocols they
  want to link to.

- Split compositor example logic from client example logic.

- Minor formatting changes
2019-12-23 07:48:29 -05:00
Rouven Czerwinski be4b9f7f5b backend/drm: print preferred mode
While printing the supported output modes, annotate the preferred mode.
2019-12-20 11:00:21 +01:00
Simon Ser 515679e4fe Refactor EGL/GL API loading
Remove glapi.sh code generation, replace it with hand-written loading
code that checks extension strings before calling eglGetProcAddress.

The GLES2 renderer still uses global state because of:

- {PUSH,POP}_GLES2_DEBUG macros
- wlr_gles2_texture_from_* taking a wlr_egl instead of the renderer
2019-12-20 01:03:34 +00:00
Simon Ser efd294ef09 backend/drm: add BenQ to manufacturer list 2019-12-11 08:18:45 -05:00
Simon Ser 6ca82087b1 backend/drm: fix segfault in init_drm_surface
When surf->gbm was previously set, we destroy it without setting it to
NULL. Later on, we only create the GBM surface if surf->gbm is NULL.
This result in a use-after-free when we start using surf->gbm.

Closes: https://github.com/swaywm/wlroots/issues/1868
Closes: https://github.com/swaywm/wlroots/issues/1874
Closes: https://github.com/swaywm/sway/issues/4785
Closes: https://github.com/swaywm/sway/issues/4717
Closes: https://github.com/swaywm/sway/issues/4730
Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
2019-12-05 10:49:04 -05:00
Simon Ser 8681e4ab8a backend/drm, backend/libinput: listen to session destroy
This fixes a heap-use-after-free when the session is destroyed before
the backend during wl_display_destroy:

    ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80
    READ of size 8 at 0x614000000180 thread T0
        #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192
        #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204
        #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24
        #3 0x7f88e21af274  (/lib64/libinput.so.10+0x28274)
        #4 0x7f88e21aff1d  (/lib64/libinput.so.10+0x28f1d)
        #5 0x7f88e219ddac  (/lib64/libinput.so.10+0x16dac)
        #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d)
        #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130
        #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50
        #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54
        #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107
        #11 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)
        #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466)
        #13 0x559fefb52385 in main ../main.c:67
        #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
        #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d)

    0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0)
    freed by thread T0 here:
        #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
        #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270
        #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156
        #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65
        #4 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)

    previously allocated by thread T0 here:
        #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
        #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746
        #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91
        #3 0x559fefb51ea6 in main ../main.c:20
        #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-12-01 10:26:12 -05:00
Jason e8855ee462 Amend typos 2019-11-23 10:33:47 -05:00
Simon Ser 16e5e9541b Add -Wmissing-prototypes
This requires functions without a prototype definition to be static.
This allows to detect dead code, export less symbols and put shared
functions in headers.
2019-11-20 02:05:03 +00:00
Simon Ser 6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Simon Ser 0e57effd38 backend/drm: add support for custom modes
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-27 10:46:47 -04:00
Simon Ser e97c2c3639 backend/drm: retry without modifiers for the primary plane
On some Intel cards using modifiers can fill the FIFO and prevent
hotplugged outputs from being properly enabled.

Add a fallback without modifiers.

Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
References: https://github.com/swaywm/wlroots/issues/1840
Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-23 09:36:50 +00:00
Simon Ser fd25e2ca11 backend/drm: track gbm_bo during direct scan-out
We need to destroy the gbm_bo we imported and drmModeRmFb.

Closes: https://github.com/swaywm/sway/issues/4662
2019-10-22 21:50:31 +00:00
Simon Ser 2bdd1d0896 backend/drm: use modifiers for our GBM buffers 2019-10-11 08:11:48 -04:00
Ivan Molodetskikh 5f78ea20fa drm: use IMPORT_FD for INVALID modifier
GBM_BO_IMPORT_FD_MODIFIER doesn't accept the INVALID modifier.
2019-09-26 23:26:40 +03:00
Rouven Czerwinski bf90474b74 backend/drm: check for mst: in path property
Instead of checking that the path property is not 0 to determine if the
connector is an MST connector, check if the path contains the mst:
string.

Fixes #1813
2019-09-05 10:25:12 +03:00
Simon Ser 8d2ea9544b backend/drm: fix missing plane formats
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-15 12:33:42 +12:00
Antonin Décimo 39c5d93dea backend/drm: use UINT64_C for uint64_t literals
Prevents an integer promotion bug during the byte-shift.
2019-08-12 09:37:21 +09:00
Rouven Czerwinski 01f903874b Revert "output: atomic mode"
This reverts commit ee5f98ad49.

This intoduced problems where outputs could not be turned off because
they had flips pending.
2019-08-07 16:22:11 +09:00
Rouven Czerwinski 4d36cc86eb backend/drm: destroy output immediately
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.

Fixes #1739
2019-08-03 15:44:21 +02:00
Simon Ser ee5f98ad49 output: atomic mode, enabled, scale and transform
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.

Compositors now need to call wlr_output_commit after setting any of those
properties.

Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.

Updates: https://github.com/swaywm/wlroots/issues/1640
2019-08-02 10:01:29 -04:00
Simon Ser ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Rouven Czerwinski d10072e76c backend: drm: switch to pageflip_handler_2
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.

Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.

Fixes #1297
2019-06-27 00:17:27 +00:00
Scott Anderson 46dc4100d6 backend/drm: Exit-early if 0 crtcs
This fixes an assertion failure if we're using a device that has 0 crtcs
as a renderer.
This would happen on some laptops with discrete GPUs.
2019-06-24 09:09:36 +03:00
Scott Anderson b3f42548d0 backend/drm: Simplify object matching code
We originally used match_obj on planes, but this was largely
unnecessary. Instead, this assigns planes statically at startup.
2019-06-22 11:58:33 +03:00
Simon Ser ce3f4c3fe1 output: remove wlr_output_impl.transform
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.

We could add support for hardware transforms, but:

- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
  limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])

This belongs to a different patch series anyway.

[1]: https://patchwork.freedesktop.org/series/52324/
2019-06-16 10:51:49 -04:00
Scott Anderson b85f0cbff9 Remove WLR_DRM_NO_ATOMIC_GAMMA workaround
This is fixed on amdgpu, so we don't need this anymore.
2019-06-11 08:52:34 +03:00