Commit Graph

1186 Commits

Author SHA1 Message Date
Simon Ser bcabe34a2e backend: automatically create renderer
If a backend accepts buffers (as indicated by get_buffer_caps) but
doesn't implement get_renderer, automatically create a renderer.
2021-05-21 22:13:54 +02:00
Simon Ser 7ec5bf6b10 backend: introduce wlr_backend_finish
This new functions cleans up the common backend state. While this
currently only emits the destroy signal, this will also clean up
the renderer and allocator in upcoming patches.
2021-05-21 22:13:54 +02:00
Simon Ser 9ca743f9fd backend/drm: use wlr_texture_from_buffer 2021-05-17 16:22:43 +02:00
Kenny Levinsen 2603a5dee7 backend/drm: Do not require mode commit on enable
If a mode is not provided, use the current mode intead.

Closes: https://github.com/swaywm/wlroots/issues/2904
2021-04-30 21:33:28 +02:00
Simon Ser c85789a3a9 backend/headless: dup DRM FD in wlr_headless_backend_create_with_renderer
We were not dup'ing the DRM FD coming from wlr_renderer_get_drm_fd,
resulting in a double-close on backend destroy.
2021-04-29 19:59:42 +02:00
Simon Ser a1e8a639b3 backend/drm: introduce drm_connector_commit_state
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
2021-04-29 19:51:57 +02:00
Simon Ser e543e26206 backend/drm: take a wlr_drm_connector instead of a wlr_output
No need to take a generic wlr_output, we already know the output
comes from the DRM backend at that point.
2021-04-29 19:51:57 +02:00
Simon Ser e06c62af77 backend/drm: take output state arg in drm_connector_commit_buffer
This will allow a whole state to be applied at once, instead of
individually applying the buffer and the mode.
2021-04-29 19:51:57 +02:00
Simon Ser 218955ce95 backend/drm: remove mode arg from drm_connector_set_mode
All of the information is in wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 7aba881c47 backend/drm: remove mode arg from drm_connector_init_renderer
This is now unused.
2021-04-29 19:51:57 +02:00
Simon Ser 31082a0554 backend/drm: remove wlr_drm_crtc_state.mode
Replace it with drm_connector_state_mode, which computes the mode
from the wlr_output_state to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser dfea0ff31d backend/drm: remove wlr_drm_crtc_state.active
Replace it with drm_connector_state_active, which figures out
whether the connector is active depending on the wlr_output_state
to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser 485ecc11a6 backend/drm: remove wlr_drm_crtc.pending_modeset
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
2021-04-29 19:51:57 +02:00
Simon Ser c9c2d7539c backend/drm: fill scratch wlr_output_state for set_mode
Populate the wlr_output_state when setting a mode. This will allow
drm_connector_set_mode to stop relying on ephemeral fields in
wlr_drm_crtc. Also drm_connector_set_mode will be able to apply
both a new buffer and a new mode atomically.
2021-04-29 19:51:57 +02:00
Simon Ser 1a9701cd7c backend/drm: take wlr_output_state as arg in commit callers
Instead of relying on wlr_output.pending to be empty when performing
backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-29 19:51:57 +02:00
Simon Ser 8f90d7f8f5 backend/drm: take wlr_output_state as arg in crtc_commit
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
2021-04-29 19:51:57 +02:00
Simon Ser e7f68ba081 backend/drm: fix allocator DRM FD on multi-GPU setups
On multi-GPU setups, there is a primary DRM backend and secondary
DRM backends. wlr_backend_get_drm_fd will always return the parent
DRM FD even on secondary backends, so that users always use the
primary device for rendering.

However, for our internal rendering we want to use the secondary
device. Use allocator_autocreate_with_drm_fd to make sure the
allocator will create buffers on the secondary device.

We do something similar to ensure our internal rendering will
happen on the secondary device with renderer_autocreate_with_drm_fd.

Fixes: cc1b66364c ("backend: use wlr_allocator_autocreate")
2021-04-29 15:58:56 +02:00
Simon Ser 619a975025 render: remove wlr_ prefix from wlr_renderer_autocreate_with_drm_fd
This function is only required because the DRM backend still needs
to perform multi-GPU magic under-the-hood. Remove the wlr_ prefix
to make it clear it's not a candidate for being made public.
2021-04-29 09:46:34 +02:00
Simon Ser 6bf2406dbf backend/drm: reword wlr_renderer failure message
Remove the assumption about EGL.
2021-04-29 09:38:10 +02:00
Simon Ser 1c1ef69326 Log when WLR_BACKENDS/WLR_RENDERER is set
Makes it easier to figure out why a backend/renderer is picked.
2021-04-28 21:06:41 +02:00
Simon Zeni cc1b66364c backend: use wlr_allocator_autocreate 2021-04-28 20:55:57 +02:00
Simon Zeni 144189674e backend: introduce backend_get_buffer_caps 2021-04-28 20:55:57 +02:00
Simon Zeni a8c91fbac9 render/shm_allocator: make wlr_shm_allocator_create return a wlr_allocator 2021-04-28 20:55:57 +02:00
Simon Zeni c75aa71816 render/gbm_allocator: make wlr_gbm_allocator_create return a wlr_allocator 2021-04-28 20:55:57 +02:00
Simon Ser 0411dc0663 Revert "backend/drm: fail instead of stripping a modifier"
This reverts commit f9f90b4173.

gbm_bo_get_modifier may return a modifier in these cases:

- The kernel doesn't support modifiers but Mesa does
- WLR_DRM_NO_MODIFIERS=1 is set

However, in both of these cases, the gbm_bo has been allocated
without modifiers.

There is already a check in drm_fb_create for modifiers:
wlr_drm_format_set_has will make sure buffers with an explicit
modifier will be rejected if the DRM backend doesn't support them.
So no need for an additional check in get_fb_for_bo.

Closes: https://github.com/swaywm/wlroots/issues/2896
2021-04-27 15:38:10 +02:00
Simon Ser 4839664a92 backend/drm: carry on when disabling a CRTC fails
On GPU unplug, disabling a CRTC can fail with EPERM.

References: https://github.com/swaywm/wlroots/pull/2575#issuecomment-761771264
2021-04-27 09:11:44 +02:00
Simon Ser 9b0e0970f9 backend/drm: destroy backend on udev remove event
Any use of the DRM FD after the remove event results in a "Permission
denied" error.
2021-04-27 09:11:44 +02:00
Simon Ser 5597776914 backend/session: add wlr_device.events.remove 2021-04-27 09:11:44 +02:00
Simon Ser c49ea9ef4f backend/drm: destroy when parent is destroyed 2021-04-27 09:11:44 +02:00
Simon Ser e804de923d backend/drm: clarify error message on drmModeAddFB fallback
The previous code would always print "falling back to legacy method",
even if the format wasn't ARGB8888.

Drop get_fb_for_bo_legacy, since the code can just be inlined without
hurting readability.

Ideally we should only fallback to drmModeAddFB if the error code
indicates the BE failure, but the original PR [1] doesn't say what
error code is returned by the kernel.

[1]: https://github.com/swaywm/wlroots/pull/2569
2021-04-26 23:12:53 +02:00
Simon Ser f9f90b4173 backend/drm: fail instead of stripping a modifier
We shouldn't strip a modifiers from buffers, because the will make
the kernel re-interpret the data as LINEAR on most drivers,
resulting in an incorrect output on screen.
2021-04-26 23:12:53 +02:00
Simon Ser 5c699f09cb Log drmGetDevices2 error code 2021-04-26 16:27:24 +02:00
Tadeo Kondrak 014c59aa40 backend/x11: add support for shm buffers 2021-04-20 20:27:25 +02:00
tomKPZ 7c9b61b18c Fix stuck keys on X11 backend 2021-04-20 08:19:48 +02:00
Kenny Levinsen 3432ab2ba7 backend/session: Close remaining devices on destroy 2021-04-18 18:32:24 +02:00
Kenny Levinsen e7515529ce backend/session: Close fd in wlr_session_close_file
This was lost in the session_impl removal refactor.
2021-04-18 18:32:24 +02:00
Simon Ser 9de93a866f backend/wayland: fallback to wl_shm on missing render node 2021-04-17 09:54:39 +02:00
Simon Ser 80865351bd backend/wayland: add support for wl_shm buffers 2021-04-17 09:54:39 +02:00
Simon Zeni 84dea55b20 render: rename get_dmabuf_render_formats into get_render_formats 2021-04-15 17:10:06 +02:00
Simon Ser 1e5460d4c6 backend/x11: check for connection errors 2021-04-14 23:56:56 +02:00
Simon Ser 053ebe7c27 backend/drm: terminate display on drmHandleEvent failure 2021-04-14 23:56:56 +02:00
Simon Ser 846e0838d6 backend/libinput: terminate display on error 2021-04-14 23:56:56 +02:00
Kenny Levinsen 7f09085461 backend/session: Remove session_impl
libseat provides all session functionality, so there is no longer need
for a session backend abstraction. The libseat device ID, seat handle
and event loop handle are moved to the main wlr_session and wlr_device
structs.
2021-04-14 23:25:07 +02:00
Kenny Levinsen 3f87c2caea backend/session: Remove noop backend
This is instead delegated to libseat.
2021-04-14 23:25:07 +02:00
Kenny Levinsen d037c2dddc backend/session: Remove direct backend
This is instead delegated to libseat.
2021-04-14 23:25:07 +02:00
Kenny Levinsen 95b657ba80 backend/session: Make libseat mandatory 2021-04-14 23:25:07 +02:00
Roman Gilg b36af22c94 backend: move get_drm_fd to public interface
The get_drm_fd was made available in an internal header with a53ab146f. Move it
now to the public header so consumers opting in to the unstable interfaces can
make use of it.
2021-04-12 11:43:56 +02:00
Kenny Levinsen d50bbf0bbc backend/session: Remove logind backend
This is instead delegated to libseat.
2021-04-11 10:03:13 +02:00
Stephan Hilb 9f012cac2f drm: check for PRIME support
PRIME support for buffer sharing has become mandatory since the renderer
rewrite. Make sure we check for the appropriate capabilities in backend,
allocator and renderer.

See also #2819.
2021-04-10 10:49:55 +02:00
Simon Ser d5105c42e3 build: disable libseat subproject server and man pages
When libseat is built as a subproject, we're not interested in
building the server or the man pages.
2021-04-09 22:28:46 +02:00