Commit Graph

310 Commits

Author SHA1 Message Date
JonnyMako 1139234117
backend/drm: fix missing cursor on external monitors with multi-GPU setup and nouveau
We need to make the multi-GPU surface current before the glFinish call.

Closes: https://github.com/swaywm/sway/issues/5319
2020-05-11 08:51:41 +02:00
Simon Ser 2ca3bdc35e backend/drm: simplify atomic commit logic
We don't need a per-CRTC atomic request anymore. Let's make the request
per-commit so that it's easier to debug.

This is also groundwork for supporting wlr_output_test properly.
2020-05-10 09:21:04 +02:00
Simon Ser 06d5aa5780 backend/drm: GAMMA_LUT_SIZE isn't atomic
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy
interface too. So we can unify both codepaths and remove
wlr_drm_interface.crtc_get_gamma_size.

It's no guaranteed to exist though, so we still need to keep the
fallback.
2020-05-10 09:20:46 +02:00
Simon Ser da63d11d34 backend/drm: remove crtc_set_cursor from interface 2020-05-09 16:42:25 +02:00
Simon Ser f8e02db4bc backend/drm: remove conn_enable from interface
Use crtc_commit instead.
2020-05-09 16:42:25 +02:00
Simon Ser c608fc89d8 backend/drm: rename crtc_pageflip to crtc_commit
Also add a flags argument.

The commit function will also be used for disabling the CRTC.
2020-05-09 16:42:25 +02:00
Simon Ser 70883fd10b backend/drm: apply gamma LUT on page-flip 2020-05-09 16:42:25 +02:00
Simon Ser 69b2279092 backend/drm: remove mode argument to crtc_pageflip
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending
output changes. More fields will be added in the future (e.g. active,
gamma).
2020-05-09 16:42:25 +02:00
Simon Ser c9d6b18eef backend/drm: remove wlr_drm_interface.crtc_move_cursor
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-09 16:42:25 +02:00
Simon Ser 90ede7f838 backend/drm: make page-flip error scarier
The logs don't currently display the importance of a line. It's easy to
read "skipping page-flip" as a debug message instead of an error
message.

Change the error message to make it more explicit.

References: https://github.com/swaywm/wlroots/pull/2147
2020-05-01 16:48:42 +02:00
Will Daly 044a9f28d6 Fix error when reconnecting external display
Reconnecting an external display fails on initial
page-flip.  This occurs when the pageflip_pending flag
has been set on the connector at the time the monitor
is removed.  Once the connector's CRTC has been deallocated,
page_flip_handler cannot find the connector by its crtc_id,
so pageflip_pending will remain set.  This causes
initialization to fail when the monitor is reconnected
with the error messages:

    Skipping pageflip on output 'X'
    Failed to initialize renderer on connector 'X': initial page-flip failed

To fix this problem, clear the pageflip_pending flag
when cleaning up the connector.
2020-05-01 16:01:30 +02:00
Scott Anderson 321537ee92 backend/drm: don't allow legacy to use direct scanout 2020-04-28 09:54:52 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson 8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Simon Ser 50ade3671f output: check for buffer size compatibility in common code
Instead of checking for buffer size compatibility in each backend,
centralize the check in wlr_output itself.
2020-04-10 15:52:20 +02:00
Simon Ser 5f092c55d1 output: fix blurred hw cursors with fractional scaling
The scaling factor was being implicitly cast to an int.

Closes: https://github.com/swaywm/sway/issues/4927
2020-04-10 15:10:12 +02:00
Simon Ser 507d9bc19e Add wlr_output_impl.rollback
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.

However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.

The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].

When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.

Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.

This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.

[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08 17:33:00 +02:00
Simon Ser d3bd5f2a7b backend: reset EGL surface after buffer swap
This prevents GL commands to affect a previously current EGL surface
after a buffer swap.
2020-04-08 17:33:00 +02:00
Simon Ser 6977f3a843 output: check buffer in wlr_output_test
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.

This brings the wlr_output API more in line with the KMS API.

This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
2020-04-08 16:31:21 +02:00
Simon Ser e041158988 output: introduce wlr_output_test 2020-04-08 16:31:21 +02:00
Simon Ser 6595db6409 buffer: add a release event
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
2020-04-02 15:03:43 +02:00
Filip Sandborg 5ee52a3ab9
Fix uint32 overflow in fill_empty_gamma_table on Icelake platform
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-15 18:41:12 +01:00
Simon Ser 52c67284e2 backend/drm: add support for adaptive_sync_enabled
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06 21:32:58 +01:00
Simon Ser 348f52b5fc output: remove wlr_output_impl.schedule_frame
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.

There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.

However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:

- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
  screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen

With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.

This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.

References: https://github.com/swaywm/wlroots/issues/1925
2020-03-04 03:22:19 +01:00
Rouven Czerwinski 144d2041ad backend/drm: remove overzealous finish_drm_surface
The previous PR was overzealous in adding a finish_drm_surface call
which was also done by the caller. Remove the call and also move the
comment to the correct code location.
2020-01-24 19:57:09 +01:00
Rouven Czerwinski f0594fb732 backend/drm: add env variable to disable modifiers
In some cases modesets fail if the planes are initialized with
modifiers. Since in this case possibly all planes need to reinitialized,
which is not possible in the current wlroots design, add an environment
variable for affected users.
2020-01-24 19:43:51 +01:00
Simon Ser 7c05933e51 backend/drm: prevent outputs from being destroyed on commit
This would happen if initializing the renderer fails. Instead, we just
mark the output as disabled.

References: https://github.com/swaywm/sway/pull/4917
2020-01-17 06:49:31 -07:00
Simon Ser 21e1953b61 backend/drm: don't modeset with a NULL mode after TTY switch
This fixes a segfault in drm_connector_set_mode (mode = NULL).

This happens because we set wlr_output.enabled to true if the connector
is attached to the CRTC. When the user disables an output in the
wlroots-based compositor, switches to another VT (enabling the output),
then switches back, wlroots sets wlr_output.enabled to true but
wlr_output.current_mode is NULL.

We should consider not reading properties from KMS after a TTY switch,
disabling all connectors. However this may result in flickering (outputs
being disabled then re-enabled).

Closes: https://github.com/swaywm/wlroots/issues/1874
2019-12-30 14:32:37 -07:00
Simon Ser 8fc16890c7 output: refuse to commit a buffer or modeset a disabled output
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30 11:21:11 -07:00
Simon Ser f0781cd792 backend/drm: modeset before enabling an output
This saves one modeset in case the previous mode is different.
2019-12-30 11:21:11 -07:00
Simon Ser 5d1ba0f446 output: re-introduce atomic mode, enabled, scale and transform
This reverts commit 01f903874b and re-applies
commit ee5f98ad49.

Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue)
See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR)
See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-30 11:21:11 -07:00
Simon Ser 4da4a15d6b output: add description
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.

References: https://github.com/swaywm/wlroots/issues/1623
2019-12-29 12:35:22 -05:00
Rouven Czerwinski be4b9f7f5b backend/drm: print preferred mode
While printing the supported output modes, annotate the preferred mode.
2019-12-20 11:00:21 +01:00
Jason e8855ee462 Amend typos 2019-11-23 10:33:47 -05:00
Simon Ser 6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Simon Ser 0e57effd38 backend/drm: add support for custom modes
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-27 10:46:47 -04:00
Simon Ser e97c2c3639 backend/drm: retry without modifiers for the primary plane
On some Intel cards using modifiers can fill the FIFO and prevent
hotplugged outputs from being properly enabled.

Add a fallback without modifiers.

Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
References: https://github.com/swaywm/wlroots/issues/1840
Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-23 09:36:50 +00:00
Simon Ser fd25e2ca11 backend/drm: track gbm_bo during direct scan-out
We need to destroy the gbm_bo we imported and drmModeRmFb.

Closes: https://github.com/swaywm/sway/issues/4662
2019-10-22 21:50:31 +00:00
Simon Ser 2bdd1d0896 backend/drm: use modifiers for our GBM buffers 2019-10-11 08:11:48 -04:00
Rouven Czerwinski bf90474b74 backend/drm: check for mst: in path property
Instead of checking that the path property is not 0 to determine if the
connector is an MST connector, check if the path contains the mst:
string.

Fixes #1813
2019-09-05 10:25:12 +03:00
Simon Ser 8d2ea9544b backend/drm: fix missing plane formats
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-15 12:33:42 +12:00
Antonin Décimo 39c5d93dea backend/drm: use UINT64_C for uint64_t literals
Prevents an integer promotion bug during the byte-shift.
2019-08-12 09:37:21 +09:00
Rouven Czerwinski 01f903874b Revert "output: atomic mode"
This reverts commit ee5f98ad49.

This intoduced problems where outputs could not be turned off because
they had flips pending.
2019-08-07 16:22:11 +09:00
Rouven Czerwinski 4d36cc86eb backend/drm: destroy output immediately
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.

Fixes #1739
2019-08-03 15:44:21 +02:00
Simon Ser ee5f98ad49 output: atomic mode, enabled, scale and transform
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.

Compositors now need to call wlr_output_commit after setting any of those
properties.

Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.

Updates: https://github.com/swaywm/wlroots/issues/1640
2019-08-02 10:01:29 -04:00
Simon Ser ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Rouven Czerwinski d10072e76c backend: drm: switch to pageflip_handler_2
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.

Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.

Fixes #1297
2019-06-27 00:17:27 +00:00
Scott Anderson 46dc4100d6 backend/drm: Exit-early if 0 crtcs
This fixes an assertion failure if we're using a device that has 0 crtcs
as a renderer.
This would happen on some laptops with discrete GPUs.
2019-06-24 09:09:36 +03:00
Scott Anderson b3f42548d0 backend/drm: Simplify object matching code
We originally used match_obj on planes, but this was largely
unnecessary. Instead, this assigns planes statically at startup.
2019-06-22 11:58:33 +03:00
Simon Ser ce3f4c3fe1 output: remove wlr_output_impl.transform
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.

We could add support for hardware transforms, but:

- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
  limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])

This belongs to a different patch series anyway.

[1]: https://patchwork.freedesktop.org/series/52324/
2019-06-16 10:51:49 -04:00