Commit Graph

504 Commits

Author SHA1 Message Date
Simon Ser 90ede7f838 backend/drm: make page-flip error scarier
The logs don't currently display the importance of a line. It's easy to
read "skipping page-flip" as a debug message instead of an error
message.

Change the error message to make it more explicit.

References: https://github.com/swaywm/wlroots/pull/2147
2020-05-01 16:48:42 +02:00
Will Daly 044a9f28d6 Fix error when reconnecting external display
Reconnecting an external display fails on initial
page-flip.  This occurs when the pageflip_pending flag
has been set on the connector at the time the monitor
is removed.  Once the connector's CRTC has been deallocated,
page_flip_handler cannot find the connector by its crtc_id,
so pageflip_pending will remain set.  This causes
initialization to fail when the monitor is reconnected
with the error messages:

    Skipping pageflip on output 'X'
    Failed to initialize renderer on connector 'X': initial page-flip failed

To fix this problem, clear the pageflip_pending flag
when cleaning up the connector.
2020-05-01 16:01:30 +02:00
Simon Ser 98d949718c backend/drm: strip alpha channel if necessary
Some primary planes don't support ARGB8888, they only support XRGB8888
(for instance on older Intel hardware). The DRM backend would fail to
initialize.

When that's the case, try to allocate buffers without an alpha channel.
2020-04-29 08:32:06 +02:00
Scott Anderson 321537ee92 backend/drm: don't allow legacy to use direct scanout 2020-04-28 09:54:52 +02:00
Scott Anderson 52281cb8ba backend/drm: move atomic cursor code into pageflip code
It makes sense to construct as much atomic state as possible in the same
place, so it doesn't get lost if we "reset" it.
2020-04-28 09:54:52 +02:00
Scott Anderson be90062c51 backend/drm: don't have fallback atomic commits
This is just doing atomic incorrectly.
2020-04-28 09:54:52 +02:00
Scott Anderson 8da9d9679e backend/drm: introduce wlr_drm_fb
This is a type which manages gbm_surfaces and imported dmabufs in the
same place, and makes the lifetime management between the two shared. It
should lead to easier to understand code, and fewer special cases.

This also contains a fair bit of refactoring to start using this new
type.

Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-28 09:54:52 +02:00
Simon Ser 50ade3671f output: check for buffer size compatibility in common code
Instead of checking for buffer size compatibility in each backend,
centralize the check in wlr_output itself.
2020-04-10 15:52:20 +02:00
Simon Ser 5f092c55d1 output: fix blurred hw cursors with fractional scaling
The scaling factor was being implicitly cast to an int.

Closes: https://github.com/swaywm/sway/issues/4927
2020-04-10 15:10:12 +02:00
Simon Ser 9acca4fc73 backend: set EGL_RENDERABLE_TYPE and EGL_SURFACE_TYPE
Ensure these are set to the correct value.
2020-04-09 00:15:25 +00:00
Simon Ser 507d9bc19e Add wlr_output_impl.rollback
Most of the pending output state is not forwarded to the backend prior
to an output commit. For instance, wlr_output_set_mode just stashes the
mode without calling any wlr_output_impl function.
wlr_output_impl.commit is responsible for applying the pending mode.

However, there are exceptions to this rule. The first one is
wlr_output_attach_render. It won't go away before renderer v6 is
complete, because it needs to set the current EGL surface.

The second one is wlr_output_attach_buffer.
wlr_output_impl.attach_buffer is removed in [1].

When wlr_output_rollback is called, all pending state is supposed to be
cleared. This works for all the state except the two exceptions
mentionned above. To fix this, introduce wlr_output_impl.rollback.

Right now, the backend resets the current EGL surface. This prevents GL
commands from affecting the output after wlr_output_rollback.

This patch is required for FBO-based outputs to work properly. The
compositor might be using FBOs for its own purposes [2], having leftover
FBO state can have bad consequences.

[1]: https://github.com/swaywm/wlroots/pull/2097
[2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08 17:33:00 +02:00
Simon Ser d3bd5f2a7b backend: reset EGL surface after buffer swap
This prevents GL commands to affect a previously current EGL surface
after a buffer swap.
2020-04-08 17:33:00 +02:00
Simon Ser 6977f3a843 output: check buffer in wlr_output_test
Check that buffer can be scanned out in wlr_output_test instead of
wlr_output_attach_buffer. This allows the backend to have access to the
whole pending state when performing the check.

This brings the wlr_output API more in line with the KMS API.

This removes the need for wlr_output_attach_buffer to return a value,
and for wlr_output_impl.attach_buffer.
2020-04-08 16:31:21 +02:00
Simon Ser e041158988 output: introduce wlr_output_test 2020-04-08 16:31:21 +02:00
Simon Ser 6595db6409 buffer: add a release event
Consumers call wlr_buffer_lock. Once all consumers are done with the
buffer, only the producer should have a reference to the buffer. In this
case, we can release the buffer (and let the producer re-use it).
2020-04-02 15:03:43 +02:00
Filip Sandborg 5ee52a3ab9
Fix uint32 overflow in fill_empty_gamma_table on Icelake platform
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-15 18:41:12 +01:00
Simon Ser 52c67284e2 backend/drm: add support for adaptive_sync_enabled
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06 21:32:58 +01:00
Simon Ser 348f52b5fc output: remove wlr_output_impl.schedule_frame
This function allowed backends to provide a custom function for frame
scheduling. Before resuming the rendering loop, the DRM and Wayland
backends would wait for vsync.

There isn't a clear benefit of doing this. The only upside is that we
get more stable timings: the delay between two repaints doesn't change too
much and is close to a mutliple of the refresh rate.

However this introduces latency, especially when a client misses a
frame. For instance a fullscreen game missing vblank will need to wait
more than a whole frame before being able to display new content. This
worst case scenario happens as follows:

- Client is still rendering its frame and cannot submit it in time
- Deadline is reached
- Compositor decides to stop the rendering loop since nothing changed on
  screen
- Client finally manages to render its frame, submits it
- Compositor calls wlr_output_schedule_frame
- DRM backend waits for next vblank
- The wlr_output frame event is fired, compositor draws new content on screen
- On the second next vblank, the new content reaches the screen

With this patch, the wlr_output frame event is fired immediately when
the client submits its late frame.

This change also makes it easier to support variable refresh rate, since
VRR is all about being able to present too-late frames earlier.

References: https://github.com/swaywm/wlroots/issues/1925
2020-03-04 03:22:19 +01:00
Rouven Czerwinski 144d2041ad backend/drm: remove overzealous finish_drm_surface
The previous PR was overzealous in adding a finish_drm_surface call
which was also done by the caller. Remove the call and also move the
comment to the correct code location.
2020-01-24 19:57:09 +01:00
Rouven Czerwinski f0594fb732 backend/drm: add env variable to disable modifiers
In some cases modesets fail if the planes are initialized with
modifiers. Since in this case possibly all planes need to reinitialized,
which is not possible in the current wlroots design, add an environment
variable for affected users.
2020-01-24 19:43:51 +01:00
Simon Ser 7c05933e51 backend/drm: prevent outputs from being destroyed on commit
This would happen if initializing the renderer fails. Instead, we just
mark the output as disabled.

References: https://github.com/swaywm/sway/pull/4917
2020-01-17 06:49:31 -07:00
Simon Ser 21e1953b61 backend/drm: don't modeset with a NULL mode after TTY switch
This fixes a segfault in drm_connector_set_mode (mode = NULL).

This happens because we set wlr_output.enabled to true if the connector
is attached to the CRTC. When the user disables an output in the
wlroots-based compositor, switches to another VT (enabling the output),
then switches back, wlroots sets wlr_output.enabled to true but
wlr_output.current_mode is NULL.

We should consider not reading properties from KMS after a TTY switch,
disabling all connectors. However this may result in flickering (outputs
being disabled then re-enabled).

Closes: https://github.com/swaywm/wlroots/issues/1874
2019-12-30 14:32:37 -07:00
Simon Ser 8fc16890c7 output: refuse to commit a buffer or modeset a disabled output
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30 11:21:11 -07:00
Simon Ser f0781cd792 backend/drm: modeset before enabling an output
This saves one modeset in case the previous mode is different.
2019-12-30 11:21:11 -07:00
Simon Ser 5d1ba0f446 output: re-introduce atomic mode, enabled, scale and transform
This reverts commit 01f903874b and re-applies
commit ee5f98ad49.

Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue)
See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR)
See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates)
See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-30 11:21:11 -07:00
Simon Ser 4da4a15d6b output: add description
wlr_output.description is a string containing a human-readable string
identifying the output. Compositors can customise it via
wlr_output_set_description, for instance to make the name more
user-friendly.

References: https://github.com/swaywm/wlroots/issues/1623
2019-12-29 12:35:22 -05:00
Scott Anderson cff1c2f740 meson: Various improvements
Bumps minimum version to 0.51.0

- Remove all intermediate static libraries.
  They serve no purpose and are just add a bunch of boilerplate for
  managing dependencies and options. It's now managed as a list of
  files which are compiled into libwlroots directly.

- Use install_subdir instead of installing headers individually.
  I've changed my mind since I did that. Listing them out is annoying as
  hell, and it's easy to forget to do it.

- Add not_found_message for all of our optional dependencies that have a
  meson option. It gives some hints about what option to pass and what
  the optional dependency is for.

- Move all backend subdirectories into their own meson.build. This
keeps some of the backend-specific build logic (especially rdp and
session) more neatly separated off.

- Don't overlink example clients with code they're not using.
  This was done by merging the protocol dictionaries and setting some
  variables containing the code and client header file.
  Example clients now explicitly mention what extension protocols they
  want to link to.

- Split compositor example logic from client example logic.

- Minor formatting changes
2019-12-23 07:48:29 -05:00
Rouven Czerwinski be4b9f7f5b backend/drm: print preferred mode
While printing the supported output modes, annotate the preferred mode.
2019-12-20 11:00:21 +01:00
Simon Ser 515679e4fe Refactor EGL/GL API loading
Remove glapi.sh code generation, replace it with hand-written loading
code that checks extension strings before calling eglGetProcAddress.

The GLES2 renderer still uses global state because of:

- {PUSH,POP}_GLES2_DEBUG macros
- wlr_gles2_texture_from_* taking a wlr_egl instead of the renderer
2019-12-20 01:03:34 +00:00
Simon Ser efd294ef09 backend/drm: add BenQ to manufacturer list 2019-12-11 08:18:45 -05:00
Simon Ser 6ca82087b1 backend/drm: fix segfault in init_drm_surface
When surf->gbm was previously set, we destroy it without setting it to
NULL. Later on, we only create the GBM surface if surf->gbm is NULL.
This result in a use-after-free when we start using surf->gbm.

Closes: https://github.com/swaywm/wlroots/issues/1868
Closes: https://github.com/swaywm/wlroots/issues/1874
Closes: https://github.com/swaywm/sway/issues/4785
Closes: https://github.com/swaywm/sway/issues/4717
Closes: https://github.com/swaywm/sway/issues/4730
Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
2019-12-05 10:49:04 -05:00
Simon Ser 8681e4ab8a backend/drm, backend/libinput: listen to session destroy
This fixes a heap-use-after-free when the session is destroyed before
the backend during wl_display_destroy:

    ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80
    READ of size 8 at 0x614000000180 thread T0
        #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192
        #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204
        #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24
        #3 0x7f88e21af274  (/lib64/libinput.so.10+0x28274)
        #4 0x7f88e21aff1d  (/lib64/libinput.so.10+0x28f1d)
        #5 0x7f88e219ddac  (/lib64/libinput.so.10+0x16dac)
        #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d)
        #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130
        #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50
        #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54
        #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107
        #11 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)
        #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466)
        #13 0x559fefb52385 in main ../main.c:67
        #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
        #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d)

    0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0)
    freed by thread T0 here:
        #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
        #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270
        #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156
        #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65
        #4 0x7f88e314acde  (/lib64/libwayland-server.so.0+0x8cde)

    previously allocated by thread T0 here:
        #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
        #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746
        #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91
        #3 0x559fefb51ea6 in main ../main.c:20
        #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-12-01 10:26:12 -05:00
Jason e8855ee462 Amend typos 2019-11-23 10:33:47 -05:00
Simon Ser 16e5e9541b Add -Wmissing-prototypes
This requires functions without a prototype definition to be static.
This allows to detect dead code, export less symbols and put shared
functions in headers.
2019-11-20 02:05:03 +00:00
Simon Ser 6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Simon Ser 0e57effd38 backend/drm: add support for custom modes
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-27 10:46:47 -04:00
Simon Ser e97c2c3639 backend/drm: retry without modifiers for the primary plane
On some Intel cards using modifiers can fill the FIFO and prevent
hotplugged outputs from being properly enabled.

Add a fallback without modifiers.

Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
References: https://github.com/swaywm/wlroots/issues/1840
Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-23 09:36:50 +00:00
Simon Ser fd25e2ca11 backend/drm: track gbm_bo during direct scan-out
We need to destroy the gbm_bo we imported and drmModeRmFb.

Closes: https://github.com/swaywm/sway/issues/4662
2019-10-22 21:50:31 +00:00
Simon Ser 2bdd1d0896 backend/drm: use modifiers for our GBM buffers 2019-10-11 08:11:48 -04:00
Ivan Molodetskikh 5f78ea20fa drm: use IMPORT_FD for INVALID modifier
GBM_BO_IMPORT_FD_MODIFIER doesn't accept the INVALID modifier.
2019-09-26 23:26:40 +03:00
Rouven Czerwinski bf90474b74 backend/drm: check for mst: in path property
Instead of checking that the path property is not 0 to determine if the
connector is an MST connector, check if the path contains the mst:
string.

Fixes #1813
2019-09-05 10:25:12 +03:00
Simon Ser 8d2ea9544b backend/drm: fix missing plane formats
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-15 12:33:42 +12:00
Antonin Décimo 39c5d93dea backend/drm: use UINT64_C for uint64_t literals
Prevents an integer promotion bug during the byte-shift.
2019-08-12 09:37:21 +09:00
Rouven Czerwinski 01f903874b Revert "output: atomic mode"
This reverts commit ee5f98ad49.

This intoduced problems where outputs could not be turned off because
they had flips pending.
2019-08-07 16:22:11 +09:00
Rouven Czerwinski 4d36cc86eb backend/drm: destroy output immediately
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.

Fixes #1739
2019-08-03 15:44:21 +02:00
Simon Ser ee5f98ad49 output: atomic mode, enabled, scale and transform
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.

Compositors now need to call wlr_output_commit after setting any of those
properties.

Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.

Updates: https://github.com/swaywm/wlroots/issues/1640
2019-08-02 10:01:29 -04:00
Simon Ser ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Rouven Czerwinski d10072e76c backend: drm: switch to pageflip_handler_2
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.

Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.

Fixes #1297
2019-06-27 00:17:27 +00:00
Scott Anderson 46dc4100d6 backend/drm: Exit-early if 0 crtcs
This fixes an assertion failure if we're using a device that has 0 crtcs
as a renderer.
This would happen on some laptops with discrete GPUs.
2019-06-24 09:09:36 +03:00
Scott Anderson b3f42548d0 backend/drm: Simplify object matching code
We originally used match_obj on planes, but this was largely
unnecessary. Instead, this assigns planes statically at startup.
2019-06-22 11:58:33 +03:00
Simon Ser ce3f4c3fe1 output: remove wlr_output_impl.transform
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.

We could add support for hardware transforms, but:

- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
  limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])

This belongs to a different patch series anyway.

[1]: https://patchwork.freedesktop.org/series/52324/
2019-06-16 10:51:49 -04:00
Scott Anderson b85f0cbff9 Remove WLR_DRM_NO_ATOMIC_GAMMA workaround
This is fixed on amdgpu, so we don't need this anymore.
2019-06-11 08:52:34 +03:00
Simon Ser d201fc3506 backend/drm: add support for multiplanar BOs 2019-06-07 09:06:11 -04:00
Simon Ser e8057bb60c backend/drm: fallback to drmModeAddFB2 2019-06-07 09:06:11 -04:00
Simon Ser d1766547bd backend/drm: reject DMA-BUFs with flags 2019-06-07 09:06:11 -04:00
Simon Ser 44ba603c0e backend/drm: hold buffers while scanning out 2019-06-07 09:06:11 -04:00
Simon Ser afe7b207d5 output: fix attach_buffer semantics 2019-06-07 09:06:11 -04:00
Simon Ser 1d222309b8 output: change set_dmabuf to attach_buffer 2019-06-07 09:06:11 -04:00
Simon Ser 5c78f1b0d5 backend/drm: strip alpha channel on scan-out 2019-06-07 09:06:11 -04:00
Simon Ser e516ea4c79 backend/drm: check format when scanning out DMA-BUF 2019-06-07 09:06:11 -04:00
emersion 96d6fde5dc backend/drm: add basic support for direct scan-out 2019-06-07 09:06:11 -04:00
Rouven Czerwinski 96e9c0f9c8 drm: legacy: issue a NULL modeset on disable
The DRM subsystem needs a NULL modeset for connectors which disappear
from the system to disable the hardware pipes, otherwise the pixels get
rendered but are sent nowhere.

The atomic backend does the equivalent by removing the properties and
issuing a commit.

Fixes #1706
2019-06-02 09:50:40 +02:00
Simon Ser 20690346c7 output: rename needs_commit to needs_frame
This new name makes more sense, since it is a request from the backend to get
a new frame. In the future a commit may not convey a new frame.
2019-04-23 14:34:30 -06:00
Simon Ser 9a0f8a194c output: refactor backend API
This updates the backend part of the output API. This is mostly renaming:
make_current becomes attach_render and swap_buffers becomes commit.

This also fixes the RDP backend to support NULL damage.
2019-04-23 14:34:30 -06:00
Alyssa Ross 95b22619e0 Fix missing headers when building without X11
The deleted includes are redundant, because other headers will include
the necessary files. Additionally, they cause build failures, because
including EGL/egl.h or EGL/eglext.h directly, instead of through
wlr/render/egl.h or wlr/render/interface.h, will mean that
MESA_EGL_NO_X11_HEADERS will not have been defined, and so the EGL
headers will attempt to pull in unnecessary X11 headers that may not
exist on the system.

For the headers produced by glgen.sh, the includes couldn't simply be
deleted, because no other header would include the EGL headers. Neither
wlr/render/egl.h or wlr/render/interface.h felt appropriate to include,
so I opted instead to copy the MESA_EGL_NO_X11_HEADERS definition before
the EGL includes.
2019-04-22 00:04:08 +03:00
Guido Günther cd60f40bbb wlr_output: Add preferred property (#1625)
* wlr_output: Indicate modes link

* wlr_output: Introduce preferred flag

This indicates an outputs preferred mode.

* drm: Set preferred flag for an outputs preferred mode
2019-03-21 22:12:43 +02:00
Scott Anderson 6a8f17b5f6 backend/drm: Don't fail on failing to find overlay format
Some hardware exists which doesn't support XRGB/ARGB overlays, and we
aren't even using overlay planes, so don't fail on trying to find a
format.
2019-03-05 23:15:20 +01:00
Scott Anderson d945c97926 backend/drm: Unset cursor on cleanup
This will prevent the cursor from persisting on the Linux framebuffer
terminal on exit.
2019-02-24 09:04:36 +01:00
Rouven Czerwinski e1834ace28 backend/drm: fix memory leak in realloc crtcs
If *changed_outputs is not supplied by the calling function, track the local
allocation with a bool variable and free the allocation at the end of the
function.
2019-02-21 08:19:12 +01:00
Brian Ashworth 50011e7170 backend/drm: fix modeset on drm fd resume
On DRM resume, such as switching back to a TTY, the output needs to be
modeset to the current mode. However, wlr_output_set_mode will return
early when attempting to set the mode to the current mode. This just
steps around wlr_output_set_mode and calls drm_connector_set_mode
directly.
2019-02-19 16:49:51 +01:00
emersion 2a738803b2
backend/drm: fix NULL dereference when unsetting cursor
This segfault happens on multi-GPU systems.

Fixes https://github.com/swaywm/sway/issues/3717
2019-02-18 20:15:39 +01:00
Drew DeVault 2d2c79e37c
Merge pull request #1537 from VincentVanlaer/cursor-dmabuf-nouveau
Add workaround for hardware cursors on nouveau
2019-02-15 16:07:50 +01:00
Vincent Vanlaer 26a9fa8148 Add workaround for hardware cursors on nouveau 2019-02-15 15:59:09 +01:00
Drew DeVault 9a5d59a839 Revert "drm: do not modeset to current mode"
This reverts commit 72c76b128e.
2019-02-15 09:44:42 -05:00
Vincent Vanlaer bc048b22fb Copy cursor surface to secondary gpu if necessary 2019-02-14 12:31:54 +01:00
Brian Ashworth 72c76b128e drm: do not modeset to current mode
There is no point in modesetting an output to a mode that it is already
set to. Modesetting will cause the output to briefly flicker which is
undesirable for a noop. This returns early in `drm_connector_set_mode`
when attempting to modeset to the current mode.
2019-02-14 10:59:06 +01:00
Vincent Vanlaer 7bc43413ed Allow cursor render surface to be used as fb
In order for a surface to be used as a cursor plane framebuffer, it
appears that requiring the buffer to be linear is sufficient.

GBM_BO_USE_SCANOUT is added in case GBM_BO_USE_LINEAR isn't sufficient
on untested hardware.

Fixes #1323

Removed wlr_drm_plane.cursor_bo as it does not serve any purpose
anymore.

Relevant analysis (taken from the PR description):

While trying to implement a fix for #1323, I found that when exporting
the rendered surface into a DMA-BUF and reimporting it with
`GBM_BO_USE_CURSOR`, the resulting object does not appear to be valid.
After some digging (turning on drm-kms debugging and switching to legacy
mode), I managed to extract the following error: ```
[drm:__setplane_check.isra.1 [drm]] Invalid pixel format AR24
little-endian (0x34325241), modifier 0x100000000000001 ``` The format
itself refers to ARGB8888 which is the same format as
`renderer->gbm_format` used in master to create the cursor bo. However,
using `gbm_bo_create` with `GBM_BO_USE_CURSOR` results in a modifier of
0. A modifier of zero represents a linear buffer while the modifier of
the surface that is rendered to is  `I915_FORMAT_MOD_X_TILED` (see
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/drm/drm_fourcc.h?h=v4.20.6#n263).
In order to fix this mismatch in modifier, I added the
`GBM_BO_USE_LINEAR` to the render surface and everything started to work
just fine. I wondered however, whether the export and import is really
necessary. I then decided to test if the back buffer of the render
surface works as well, and at least on my hardware (Intel HD 530 and
Intel UHD 620) it does. This is the patch in this PR and this requires
no exporting and importing.

I have to note that I cheated in order to import DMA_BUFs into a cursor
bo when doing the first tests, since on import the Intel drivers check
that the cursor is 64x64. This is strange since cursor sizes other than
64x64 have been around for quite some time now
(https://lists.freedesktop.org/archives/mesa-commit/2014-June/050268.html).
Removing this check made everything work fine. I later (while writing
this PR) found out that `__DRI_IMAGE_USE_CURSOR` (to which
`GBM_BO_USE_CURSOR` translates) has been deprecated in mesa
(https://gitlab.freedesktop.org/mesa/mesa/blob/master/include/GL/internal/dri_interface.h#L1296),
which makes me wonder what the usecase of `GBM_BO_USE_CURSOR` is. The
reason we never encountered this is that when specifying
`GBM_BO_USE_WRITE`, a dumb buffer is created trough DRM and the usage
flag never reaches the Intel driver directly. The relevant code is in
https://gitlab.freedesktop.org/mesa/mesa/blob/master/src/gbm/backends/dri/gbm_dri.c#L1011-1089
. From this it seems that as long as the size, format and modifiers are
right, any surface can be used as a cursor.
2019-02-04 20:47:07 +01:00
emersion 75371d2c88
Require libdrm >= 2.4.95 2019-01-29 19:33:38 +01:00
emersion ee293fab58
backend/drm: fix GBM format mismatch
We create the EGL config with GBM_FORMAT_ARGB8888, but then initialize GBM BOs
with GBM_FORMAT_XRGB8888. This mismatch confuses Mesa.

Instead, we can always use GBM_FORMAT_ARGB8888, and use DRM_FORMAT_XRGB8888
when calling drmModeAddFB2.

Fixes https://github.com/swaywm/wlroots/issues/1438
2019-01-29 12:04:12 +01:00
emersion d4ffa5b7a6
backend/drm: fix state for outputs loosing their CRTC
When there aren't enough CRTCs for all outputs, we try to move a CRTC from a
disabled output to an enabled one. When this happens, the old output's state
wasn't changed, so the compositor thought it was still enabled and rendering.

This commit marks the old output as WLR_DRM_CONN_NEEDS_MODESET and sets its
current mode to NULL.
2019-01-19 10:18:03 +01:00
emersion 9b1d9fb91e
backend/drm: get physical size from libdrm
Values from libdrm are likely more reliable than raw values from the EDID. We
were already using values from libdrm, but they were overwritten by parse_edid.
See drm.c:

    wlr_conn->output.phys_width = drm_conn->mmWidth;
    wlr_conn->output.phys_height = drm_conn->mmHeight;
2018-12-23 10:36:53 +01:00
Timidger 9af0c5338f
Standardize the wlr_box input paramaters
Fixes #1094
2018-12-21 13:56:10 -05:00
emersion ff6c4f80b2
backend/drm: don't insert duplicate custom modes, fix refresh rate 2018-12-16 11:06:46 +01:00
Scott Anderson fec88770dd backend/drm: Fix uninitialized variable 2018-12-09 22:55:53 +13:00
Scott Anderson efdd4d6ea2 backend/drm: Improve encoder logic
This fixes an issue that can occur with DP MST connectors not reporting
any encoders.
2018-12-09 22:48:00 +13:00
emersion f8056a0350
backend/drm: fix disappeared output indices
This commit changes `scan_drm_connectors` to add new outputs to the end of the
list. That way, it's easier to understand what's going on with indices.

When we need to destroy outputs, we now walk the list in reverse order. This
ensures indices remain correct while iterating and removing items from the
list.

We now also make outputs without a CRTC disappear (those are in
WLR_DRM_CONN_NEEDS_MODESET state).
2018-12-09 10:12:52 +01:00
emersion 491f1dbf75
backend/drm: fix VLA overflow 2018-12-04 18:56:29 +01:00
Rostislav Pehlivanov 91513c89cd Fix interlaced mode rejection 2018-11-22 17:52:52 +00:00
Rostislav Pehlivanov dc9fdd6385 Skip interlaced modes during drm mode detection
Fixes #3167
A better solution could be made if there's a need to.
2018-11-21 19:23:48 +00:00
emersion b5125ff328
backend/drm: specify minimum config attributes
Since the format used by DRM is GBM_FORMAT_ARGB8888, we need at least a R, G, B
and A channel.
2018-11-04 09:00:55 +01:00
Drew DeVault 70ca7daeb2
Merge pull request #1346 from emersion/fix-schedule-frame-mgpu
backend/drm: fix frame scheduling on secondary GPUs
2018-10-30 01:59:25 +01:00
emersion 68362b37a8
backend/drm: fix frame scheduling on secondary GPUs
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.

Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.

In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
2018-10-29 20:38:57 +01:00
emersion 443a38bd3f
backend/drm: add WLR_DRM_NO_ATOMIC_GAMMA env variable
This allows the legacy interface to be used instead of atomic if needed. This
is a workaround to make some Intel GPUs work (if this variable is unset) as
well as to make some AMD GPUs work (if this variable is set).
2018-10-28 23:43:21 +01:00
sghctoma fa587b8ea9 Increase _POSIX_C_SOURCE to 200112L
CLOCK_MONOTONIC appeared in IEEE Std. 1003.1-200x, it was not part of
POSIX.1b (the 1993 version), and FreeBSD treats it accordingly.
2018-10-17 08:33:19 +02:00
emersion b66041a9e5 backend/drm: don't reset conn->pageflip_pending in drm_connector_cleanup
If a pageflip is pending before cleanup, it's still pending after. This
is used line 1177: drm_connector_cleanup is called and
conn->pageflip_pending is checked afterwards.

Fixes #1297
2018-10-09 14:54:33 +02:00
Drew DeVault 8488ed2997
Merge pull request #1298 from emersion/output-dangling-idle-frame
output: remove idle_frame event source when destroying output
2018-10-09 13:41:04 +02:00
Rouven Czerwinski 77478ac302 backend/drm: set drmEventContext version to 2
As per [1] set drmEventContext version to 2, since wlroots does not use the
page_flip_handler2.

[1]: https://s-opensource.org/2017/04/12/libdrm-event-handling-youre-probably-wrong/
2018-10-09 12:34:01 +02:00
emersion 46b1ba386f output: remove idle_frame event source when destroying output
This prevents the idle event to be activated on a destroyed
output.

This also makes the backend responsible for free-ing modes, as it
is the one allocating them and adding them to the list. Note that
the DRM backend (the only one using modes) already frees them.
2018-10-09 10:55:03 +02:00
Scott Anderson 885586a831
Merge pull request #1280 from emersion/drm-link-status
backend/drm: add support for the link-status property
2018-10-08 21:01:30 +02:00
emersion 37de179013 backend/drm: fix zero-length VLAs 2018-10-07 13:04:52 +02:00
emersion 776008da69 backend/drm: properly handle GPUs without CRTCs 2018-10-07 12:59:00 +02:00
emersion ba91422747 output: don't trigger a frame immediately in schedule_frame
This desynchronizes our rendering loop with the vblank cycle.

In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.

Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.

Fixes #617
Fixes swaywm/sway#2748
2018-10-05 16:18:37 +02:00
emersion eac7c2ad2f output: add presentation refresh prediction 2018-10-04 22:00:24 +02:00
emersion b0635bf3e7 Rename get_present_clock to get_presentation clock, use it 2018-10-04 22:00:22 +02:00
emersion 54e1287f30 backend: add get_present_clock 2018-10-04 21:58:17 +02:00
emersion 78389fe722 output: add present event 2018-10-04 21:56:38 +02:00
emersion f5a147b739 backend/drm: add support for the link-status property 2018-10-04 21:54:27 +02:00
Drew DeVault 841d04db99
Merge pull request #1262 from nyorain/session_fix
Improve session handling
2018-10-04 17:36:39 +02:00
emersion 7ab37bf152 backend/drm: update EDID manufacturers database 2018-10-04 10:58:45 +02:00
emersion e88db9a3fb backend/drm: reset gamma table on VT switch 2018-10-03 10:53:35 +02:00
emersion 2beb68007e output: make gamma size a size_t and gamma table const 2018-10-03 10:36:33 +02:00
emersion 79dd9ba151 backend/drm: don't free connector immediately
When a pageflip is pending, we'll get a DRM event for the connector
in the future. We don't want to free the connector immediately
otherwise we'll use-after-free in the pageflip handler.

This commit adds a new state, "DISAPPEARED". This asks the pageflip
handler to destroy the output after it's done pageflipping.
2018-09-28 10:00:40 +02:00
nyorain 7b52388424 Rework session handling
Sessions can now be retrieved from a backend in a more general manner.
Multi-backend gets back its `session` field that contains the session
if one was created, removing the interfacing from multi backend with the
drm backend directly. This adds the possibility to use sessions even
without the drm backend.

It additionally fixes the bug that 2 session objects got created when
WLR_BACKENDS were set to "libinput,drm".

To allow vt switching without drm backend (and drm fd) on logind, start
listening to PropertiesChanged signals from dbus and parse the session
"Active" property when no master fd was created (this does not change
current drm backend behaviour in any way).
2018-09-24 23:35:09 +02:00
emersion 139a905924 backend/drm: add assertions 2018-09-18 11:06:01 +02:00
emersion f8a50e4fe7 backend/drm: steal CRTCs from disabled outputs
This commit allows outputs that need a CRTC to steal it from
user-disabled outputs. Note that in the case there are enough
CRTCs, disabled outputs don't loose it (so there's no modeset
and plane initialization needed after DPMS). CRTC allocation
still prefers to keep the old configuration, even if that means
allocating an extra CRTC to a disabled output.

CRTC reallocation now happen when enabling/disabling an output as
well as when trying to modeset. When enabling an output without a
CRTC, we realloc to try to steal a CRTC from a disabled output
(that doesn't really need the CRTC). When disabling an output, we
try to give our CRTC to an output that needs one. Modesetting is
similar to enabling.

A new DRM connector field has been added: `desired_enabled`.
Outputs without CRTCs get automatically disabled. This field keeps
track of the state desired by the user, allowing to automatically
re-enable outputs when a CRTC becomes free.

This required some changes to the allocation algorithm. Previously,
the algorithm tried to keep the previous configuration even if a
new configuration with a better score was possible (it only changed
configuration when the old one didn't work anymore). This is now
changed and the old configuration (still preferred) is only
retained without considering new possibilities when it's perfect
(all outputs have CRTCs).

User-disabled outputs now have `possible_crtcs` set to 0, meaning
they can only retain a previous CRTC (not acquire a new one). The
allocation algorithm has been updated to do not bump the score
when assigning a CRTC to a disabled output.
2018-09-15 08:37:33 +02:00
emersion cb293f09e7 output: make wlr_output_enable return a bool 2018-09-14 18:18:07 +02:00
Drew DeVault ca331c0468
Merge pull request #1235 from emersion/dealloc-unused-crtcs
backend/drm: de-allocate unused CRTCs
2018-09-10 21:51:36 -04:00
emersion 1fcecd68df backend/drm: de-allocate unused CRTCs
They can be re-used by another output after a subsequent hotplug.
2018-09-10 18:46:30 +02:00
mntmn e1c91884fb fix cursor loss w/ legacy drm and software cursor (tested on etnaviv) 2018-09-10 17:30:26 +02:00
emersion 8a6bdc193d backend/drm: damage outputs when switching CRTCs 2018-09-04 23:10:37 +02:00
emersion 1342393632 backend/drm: cosmetic enhancements 2018-09-04 23:08:45 +02:00
emersion 5b13b8a12c backend/drm: consider continue not using resources
Fixes #1230
2018-09-04 22:57:09 +02:00
emersion fb94f03b43 backend/drm: prevent use of uninitialized data 2018-09-04 22:50:59 +02:00
emersion d605b2ea07 backend/drm: remove unused if 2018-09-04 22:49:54 +02:00
emersion 017cfb0b86 backend/drm: log when de-allocating CRTC 2018-09-04 19:44:44 +02:00
emersion b877daded1 backend/drm: better hotplug handling
This commit handles better situations in which the number of
connected outputs is greater than the number of available CRTCs.
It'll enable as many outputs as possible, and transfer CRTCs to
outputs that need one on unplug.

This changes CRTC and plane reallocation to happen after scanning
DRM connectors instead of on modeset.

This cleanups CRTCs and planes on unplug to allow them to be
re-used for other outputs.

On modeset, if an output doesn't have a CRTC, the desired mode is
saved and used later when the output gains a CRTC.

Future work includes giving priority to enabled outputs over
disabled ones for CRTC allocation. This requires the compositor to
know about all outputs (even outputs without CRTCs) to properly
modeset outputs enabled in the compositor config file and disable
outputs disabled in the config file.
2018-09-04 15:09:07 +02:00
emersion 95d05acda5 backend/drm: fix invalid VLA size in scan_drm_connectors
I failed to see this issue with Valgrind because of the +1.
2018-09-02 10:11:23 +02:00
emersion ef88df2142 backend/drm: emit new_output after scanning connectors
This prevents receiving modesetting requests from the compositor
while we don't have the whole picture (ie. while we haven't yet
scanned all connectors).

This also makes connectors without CRTCs disabled (they can't be
enabled yet even if some CRTCs are free'd -- this is future work).
2018-09-02 01:03:20 +02:00
emersion e84f01168d backend/drm: allow disabling outputs in NEEDS_MODESET state
This correctly frees CRTCs when disabling outputs without setting
a mode.
2018-09-01 23:43:16 +02:00
Drew DeVault 633663cdde Use legacy modesetting for gamma control
It doesn't look like there's any motion on a fix from the AMDGPU side,
and using the legacy interface for this isn't so bad.
2018-08-29 23:05:38 +02:00
emersion 7a3f7b3c8a backend/drm: add support for DRM_MODE_CONNECTOR_DPI 2018-08-21 13:05:38 +01:00
Scott Anderson 2d8f53affd Check for DRM prime
This will indicate the user properly when multi-GPU is not supported by
their GPU driver.
2018-08-05 18:25:25 +12:00
Scott Anderson 1a2b3445dc Remove unused data from gbm_bo userdata
These aren't used anymore and crashes when the gbm_bo tries to get
destroyed (e.g. on hotplug).
2018-08-04 17:02:53 +12:00
Scott Anderson 4bee710c30 Fix hardware cursor on secondary GPU
Create rendering resources on parent GPU, so that we can sample the
passed in texture properly. The cursor buffer needs to remain on the
same GPU.
2018-08-04 15:08:28 +12:00
Mariusz Bialonczyk e547e55be0 multi-gpu: do not flip screens on secondary GPU
All screens on secondary GPU in multiple GPU configurations
was flipped 180.

The flipped screens was always on secondary card (the primary card
was always correct).

Tested on nouveau with:
WLR_DRM_DEVICES=/dev/dri/card1:/dev/dri/card2
WLR_DRM_DEVICES=/dev/dri/card2:/dev/dri/card1

The commit is fixing this problem. Now all screens are "normal".
2018-08-03 07:43:22 +02:00
Mariusz Bialonczyk 15dacebc36 multi-backend: do not expose internal renderers
backend_get_renderer() is now returning the renderer of the primary GPU, instead
of its own renderer, since that's the thing which actually does all of the "real"
rendering

wlr_multi_backend_add() is now adding all subbackends (otherwise only one GPU
is handled).

credits: @ascent12
2018-08-03 07:43:22 +02:00
emersion 364afced3e backend/drm: remove unnecessary casts 2018-08-02 23:33:59 +01:00
emersion 2ebecb6727 backend/drm: allow to pass empty gamma ramp to reset it 2018-08-02 23:33:59 +01:00
emersion a149c2370a Implement wlr-gamma-control-unstable-v1 2018-08-02 23:33:04 +01:00
emersion 7cbef15206
util: add wlr_ prefix to log symbols 2018-07-09 22:49:54 +01:00
Drew DeVault be54278207
Merge pull request #1095 from agx/output-add-mode
Allow to add additional modes to outputs
2018-07-07 08:58:17 -07:00
Guido Günther 8d72090afe drm: Allow to add additional modes
This allows to add additional modes to the list of available video modes
using VESA Coordinated Video Timing information.

Closes #1080
2018-07-07 14:51:39 +02:00
emersion 2b9cbaddf3
screencopy: add support for frame flags 2018-06-30 22:18:03 +01:00
Dominique Martinet f0d455f088 drm backend: overflow fixes
These operations are done in 32-bit arithmetics before being casted to 64-bit,
thus can overflow before the cast.
Casting early fixes the issue.

Found through static analysis
2018-06-30 11:21:22 +09:00
emersion 21928cbe61
Merge branch 'master' into screencontent 2018-05-31 12:33:27 +01:00
emersion 28020ff577
Only allow one modifier per DMA-BUF, split attributes struct in render/ 2018-05-30 09:29:12 +01:00
emersion bd430b8620
backend/drm: support multi-planar DMA-BUFs when exporting 2018-05-29 18:47:17 +01:00
emersion 9e26808c28
output, backend/drm: add wlr_output_export_dmabuf 2018-05-29 18:45:45 +01:00
emersion 79683ee497
backend/drm: better connector cleanup, add more logs 2018-05-27 13:21:41 +01:00
emersion 6eb4b5b54d
Merge pull request #993 from emersion/bind-wl-drm-in-renderer
render: bind wl_drm in renderer
2018-05-25 13:54:16 +01:00