dd69d7b764
Use VLA instead of heap alloc
2018-02-09 19:37:01 +01:00
0232269a2d
Fix style
2018-02-09 19:35:44 +01:00
b2f6941617
Free gamma when property blob creation fails
2018-02-09 18:54:56 +01:00
2df97ed16a
Set needs_swap on output when gamma changes
2018-02-09 17:29:14 +01:00
f5e5d1983b
Do not allow gamma control without a crtc
2018-02-09 17:29:14 +01:00
ab011406ad
Add atomic gamma lut size fetching
...
Legacy gamma lut size now uses the new legacy_crtc member of
wlr_drm_crtc. This was Previously doen using old_crtc in
wlr_drm_connector, but since this refers to the crtc that was connected to
the ouput, this could give the wrong result.
2018-02-09 17:29:14 +01:00
cc1229e75e
Add atomic gamma setting
2018-02-09 17:29:04 +01:00
cdd55b5d19
Merge remote-tracking branch 'upstream/master' into output-damage
2018-02-09 14:50:26 +01:00
08fda567d2
prevents reuse of outdated wlr_output state
...
On the drm output the wlr_drm_connector structs are reused.
This struct contains the wlr_output struct, which is reused as well.
The old code kept modes/edid and output state persistent over hotplug.
This nulls the relevant strings, reads newer edid data and removes old
modes on unplug.
2018-02-06 22:45:37 +01:00
3d3ea32137
Merge remote-tracking branch 'upstream/master' into output-damage
2018-02-03 00:15:44 +01:00
bb39277e97
backend/drm: update output enabled property on modeset
2018-02-02 22:28:08 +01:00
bb4aeb3b2f
backend/drm: support updating cursor when session is paused
2018-02-02 21:01:59 +01:00
babdd6ccf7
backend: fix use-after-free when destroying backends
...
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.
The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
2018-01-30 19:45:57 +01:00
c5aac77692
Fix some typos
...
Prefer initialize over initialise since used more often in the sources.
2018-01-30 16:10:07 +01:00
f152fdb4c5
Merge pull request #594 from Ongy/drm-surface-buffers
...
relases gbm buffers on init
2018-01-30 11:04:01 +01:00
d498855b9d
backend/drm: fix hw cursor position on rotated and scaled outputs
...
output: add wlr_output_transformed_resolution
2018-01-30 10:23:35 +01:00
51c22d39a4
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-29 23:24:09 +01:00
ed5b1fdedd
Merge pull request #580 from emersion/screenshooter-renderer-backport
...
Backport screenshooter fixes from the renderer redesign v1
2018-01-29 17:13:23 -05:00
cde0f454b3
Clean up the gbm/egl as well
2018-01-29 11:49:31 +01:00
2cdb646531
relases gbm buffers on init
...
The wlr_drm_surface_init function is called (upon others) when the drm
mode is changed.
When the surface was used previously this replaced the gbm_surface, but
did not replace the gbm buffers (front/back).
With this, wlr_drm_surface_get_from never set up the new buffers with
the new glViewport because surf->front existed.
This frees the buffers to get new buffers on the new surface with the
new viewport.
2018-01-29 11:29:54 +01:00
b47e8c4a1d
backend/drm: do not retry pageflip when swapping buffers
2018-01-28 23:33:38 +01:00
20e6861021
Do not flush damage if swapping buffers failed
...
This should solve issues with multiple outputs on DRM backend.
2018-01-28 22:39:24 +01:00
1ee61dbd0f
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-28 21:22:50 +01:00
d7dfbd23fa
drm: Use ptrdiff_t instead of intmax_t in format string
...
since we're looking at pointer differences.
Otherwise the build fails on arm like
In file included from ../backend/drm/drm.c:19:0:
../include/wlr/util/log.h:34:17: error: format '%jd' expects argument of type 'intmax_t', but argument 7 has type 'int' [-Werror=format=]
_wlr_log(verb, "[%s:%d] " fmt, _strip_path(__FILE__), __LINE__, ##__VA_ARGS__)
^
../backend/drm/drm.c:462:2: note: in expansion of macro 'wlr_log'
wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
^~~~~~~
../backend/drm/drm.c:462:39: note: format string is defined here
wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
~~^
%d
2018-01-27 12:29:56 +01:00
7adf13e284
Fix flickering when switching VT
2018-01-27 11:16:42 +01:00
8d58ed502b
output: add wlr_output_schedule_frame
2018-01-26 22:39:23 +01:00
ece2c1e4e2
Damage tracking for transformed outputs
2018-01-26 22:11:09 +01:00
72507f9820
Clean up session signal handler on drm init fail
2018-01-24 18:27:53 +01:00
4fa90b0511
Backport screenshooter fixes from the renderer redesign v1
...
This backports some changes to #319 to fix the screenshooter data
format. This also adds wlr_backend_get_renderer which will be
useful to support multiple renderers.
2018-01-23 22:06:54 +01:00
59c53e8333
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-21 22:18:06 +01:00
f8b9f44ff5
Add con/crtc null check to move_cursor in drm
2018-01-21 15:47:02 -05:00
9d4ea146b6
Added crtc null check for other drm funcs
2018-01-21 15:37:23 -05:00
4478cf1ddc
Fixes #575
2018-01-21 14:57:24 -05:00
0365b587f0
output: add damage tracking via buffer age
2018-01-21 00:06:35 +01:00
4ca38b84ed
backend/drm: fix hardware cursors not moving
...
This adds back `wlr_output::needs_swap`. This allows a backend to
request buffer swaps even if the output isn't damaged. This is
needed by the DRM backend to trigger pageflips when the cursor
moves.
2018-01-20 16:43:14 +01:00
584f06ad2f
backend/drm: do not try a pageflip is another one is in pending
2018-01-19 23:46:40 +01:00
f0f97280a0
backend/drm: fix retry pageflip
2018-01-19 23:35:23 +01:00
b331c5c2c5
Merge pull request #549 from emersion/output-enabled
...
Add wlr_output::enabled
2018-01-15 20:53:13 -05:00
0eebaf98d0
drm: do not pageflip when enabling output
2018-01-15 21:49:37 +01:00
3101c300b1
Don't crash if crtc->cursor is NULL
...
Same as what atomic_crtc_set_cursor does
Core was generated by `_build/rootston/rootston'.
Program terminated with signal SIGSEGV, Segmentation fault.
0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
170 if (!crtc || !crtc->cursor) {
(gdb) bt
0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
1 0xb6f2a856 in wlr_drm_connector_move_cursor (output=0x2242b28, x=0, y=0) at ../backend/drm/drm.c:634
2 0xb6f3cea0 in wlr_output_cursor_set_image (cursor=0x21a0338, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4) at ../types/wlr_output.c:516
3 0xb6f39da2 in wlr_cursor_set_image (cur=0x22cfc90, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4, scale=1) at ../types/wlr_cursor.c:310
4 0xb6f44d2a in wlr_xcursor_manager_set_cursor_image (manager=0x22cfd10, name=0x434420 "left_ptr", cursor=0x22cfc90) at ../types/wlr_xcursor_manager.c:80
5 0x00431c0a in roots_seat_configure_xcursor (seat=0x22cef08) at ../rootston/seat.c:515
6 0x0043137c in roots_seat_init_cursor (seat=0x22cef08) at ../rootston/seat.c:210
7 0x004315ec in roots_seat_create (input=0x218d220, name=0x434594 "seat0") at ../rootston/seat.c:289
8 0x0042ecba in input_get_seat (input=0x218d220, name=0x434594 "seat0") at ../rootston/input.c:39
9 0x0042ed04 in input_add_notify (listener=0x218d228, data=0x218d3b0) at ../rootston/input.c:54
10 0xb6f2f2e6 in wl_signal_emit (signal=0x1ea548c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
11 0xb6f2f572 in input_add_reemit (listener=0x1ea9990, data=0x218d3b0) at ../backend/multi/backend.c:101
12 0xb6f2db7e in wl_signal_emit (signal=0x1ea992c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
13 0xb6f2ddaa in handle_device_added (backend=0x1ea9920, libinput_dev=0x2292598) at ../backend/libinput/events.c:87
14 0xb6f2e164 in wlr_libinput_event (backend=0x1ea9920, event=0x2292b78) at ../backend/libinput/events.c:198
15 0xb6f2d678 in wlr_libinput_readable (fd=23, mask=1, _backend=0x1ea9920) at ../backend/libinput/backend.c:28
16 0xb6f2d7c0 in wlr_libinput_backend_start (_backend=0x1ea9920) at ../backend/libinput/backend.c:74
17 0xb6f27170 in wlr_backend_start (backend=0x1ea9920) at ../backend/backend.c:30
18 0xb6f2f320 in multi_backend_start (wlr_backend=0x1ea5480) at ../backend/multi/backend.c:22
19 0xb6f27170 in wlr_backend_start (backend=0x1ea5480) at ../backend/backend.c:30
20 0x0042fbc6 in main (argc=1, argv=0xbe89dd04) at ../rootston/main.c:60
2018-01-15 13:37:53 +01:00
53ba9b4eec
Fix output enable in DRM backend
2018-01-07 00:28:21 +01:00
771263380c
Add wlr_output::enabled
2018-01-04 12:46:15 +01:00
8e24aaa3c6
style: fix sizeof() calls without parentheses
2017-12-28 16:28:19 +01:00
e737f65e38
Fix cursor on transformed output with DRM backend
2017-12-26 18:16:37 +01:00
a937016e38
remove session from multibackend
2017-12-19 18:25:46 -05:00
be95147385
drm backend: add wlr_output_is_drm
2017-12-19 20:13:49 +01:00
b99d1f4fcc
Refactor wlr_egl_init to accept config_attribs
2017-12-17 23:51:04 +01:00
0256de0002
Add full refresh rate support to custom modes
2017-12-17 18:02:55 +01:00
23fb663ea4
Merge pull request #453 from emersion/surface-transform
...
Add surface transforms support
2017-12-14 14:43:04 -05:00
466e86b7b2
Merge branch 'master' into surface-transform
2017-12-14 20:31:18 +01:00
75ef7860bb
Merge branch 'master' into display-destroy
2017-12-14 20:29:30 +01:00
3b4b8953d9
Update output layout when scale or transform changes
2017-12-12 21:58:00 +01:00
c67a5824b8
Merge branch 'master' into display-destroy
2017-12-11 16:14:03 +01:00
18eb1eee3f
Listen to display destroy in xwayland, rename wlr_egl_free
2017-12-08 00:59:37 +01:00
9d43adaafa
Listen to display destroy in backends
2017-12-07 23:44:59 +01:00
91d72040e5
Configure outputs with make, model, serial in rootston
...
Added fallbacks in DRM backend in case EDID extension data for model and serial is missing.
Updates #403
2017-12-07 13:59:19 +01:00
8af779fae6
Fix segfault when moving hardware cursor
2017-12-05 22:23:01 +01:00
6a69b4419f
Make wlr_output_transform_* functions public, refactoring
2017-12-01 09:15:33 +01:00
bc113c16aa
Use correct include path for glapi.h
2017-11-30 10:32:55 +13:00
09279b90a6
Add wlr_output.serial
2017-11-11 19:09:34 +01:00
f451ea3639
rootston exit: fix drm destroy
...
wlr_drm_connector were being freed without removing them
from the drm->outputs list, segfaulting on destroy
2017-11-01 19:37:35 +01:00
a15b35aa10
Remove mysterious hotspot switch in DRM backend
2017-11-01 14:36:58 +01:00
60c018c017
Fix hidden software cursors, fix cursor transformations on DRM backend
2017-11-01 14:25:41 +01:00
0beae99188
Apply output transformation to pointer events in Wayland backend
2017-11-01 11:00:27 +01:00
c3b09f73da
Fix cursor hotspot with rotated outputs on DRM backend
2017-10-31 12:30:57 +01:00
6656e25fd4
Transform cursor hotspot
2017-10-31 12:30:56 +01:00
1b6c729360
Add wlr_output_cursor
2017-10-31 12:30:03 +01:00
fa9c6ecc53
Fix segfault in DRM cursor
2017-10-28 15:09:38 -04:00
9d587d759f
Do not set hw cursor if disabled when switching VT
2017-10-26 18:58:44 +02:00
75f0a6c998
Merge pull request #286 from versusvoid/update-connector-crtc-bindings
...
Update Connector-CRTC bindings after resume in DRM backend
2017-10-23 20:25:40 +13:00
3ed3271b98
Rescan connectors on DRM resume
2017-10-22 21:44:24 +00:00
549777ca19
Set crtc field when scanning for DRM connectors
...
and always use it when matching CRTCs with connectors.
Fix deactivated monitors check.
2017-10-22 21:38:30 +00:00
3c31209a97
Reinitialize only changed DRM outputs after setting mode on one
2017-10-22 21:34:56 +00:00
ecb2a2b0d3
Emit output resolution event only when resolution changes
2017-10-22 21:34:56 +00:00
1cc8f21d8e
Cleanup wlr_gamma_control
2017-10-22 23:11:26 +02:00
e1d213fccd
Create globals only for enabled outputs in DRM backend
2017-10-22 22:21:23 +02:00
2ab080e79a
Fix index computation in DRM output scan and CRTC match
2017-10-22 10:54:09 +00:00
16f35ecbea
Merge branch 'master' into heghe/wl_list
2017-10-21 22:03:48 -04:00
169b68b17c
Rename remaining refs to wlr_list
2017-10-21 22:02:36 -04:00
bdeffad7e5
Remove drm field from wlr_drm_connector
2017-10-22 10:36:07 +13:00
822a9f65a4
Add pointer to backend inside wlr_output
2017-10-22 10:36:07 +13:00
4ea84c5765
Remove unnecesary wlr_renderers
2017-10-22 10:36:07 +13:00
9b984253e2
Move egl.h to render/egl.h
2017-10-22 10:36:07 +13:00
e1f196a3e9
Replace list_t with wl_list for wlr_input_device
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:50:43 +03:00
1d716241af
Replace list_t with wl_list in wlr_output
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:46:09 +03:00
c03e774636
Replace list_t with wl_list in wlr_drm_backend
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:46:03 +03:00
92daa790bb
Allow to update the cursor hotspot without its pixels
2017-10-12 09:40:51 +02:00
c0e5feea37
Add GL/EGL extension loader generator
2017-10-08 13:23:41 +13:00
641d08ce7e
Transform hotspot with cursor
...
Fix #188
2017-10-06 09:07:08 +03:00
c5df6ca900
Fix memory leaks
2017-10-05 20:01:56 +00:00
f193623ca1
Change iface prefix to suffix
2017-10-02 21:44:33 +13:00
f6f9c40965
Minor fixes
2017-10-01 22:44:24 +13:00
009c3747a8
Multi-GPU DRM
2017-10-01 22:29:25 +13:00
fa3d0ed929
Change wlr_session to open every GPU
2017-10-01 16:47:05 +13:00
eaef028976
Add renderer pointer inside drm_surface
2017-10-01 15:55:25 +13:00
4101b89700
Rename wlr_drm_output to wlr_drm_connector
2017-09-30 23:31:08 +13:00
22e77d9195
Rename backend to drm
2017-09-30 22:22:26 +13:00
ec5b95e08f
Add pointer to backend from DRM outputs
2017-09-30 22:01:59 +13:00
096249a2a1
Split DRM rendering to its own file
2017-09-30 20:52:58 +13:00
d0708b1a3a
Split DRM internal interface to its own header
2017-09-30 19:11:41 +13:00
610b0493ac
Rename files to remove pointless drm prefix
2017-09-30 19:03:34 +13:00
c8a8ff66f2
Removed unused fields
2017-09-30 18:53:05 +13:00
517ba0bc16
Change egl_get_config to always use visual id
2017-09-29 16:15:09 +13:00
c8c5aedaa2
Add error checking to DRM legacy
2017-09-24 12:19:49 +13:00
419400ae00
Send failure code on partial atomic commit
2017-09-24 12:09:17 +13:00
a466c86fba
Set state properly
2017-09-24 12:06:00 +13:00
db5e9385d4
Simplify retry_pageflip
2017-09-23 18:44:39 +12:00
025b3ee515
Add error recovery for failed page flips
2017-09-23 18:27:14 +12:00
459d138fa2
Add timeout to DRM cleanup
...
This prevents a potential infinite loop preventing us from closing
properly.
2017-09-23 16:32:25 +12:00
8cbade355f
Print connector name on atomic commit failure
2017-09-23 13:38:43 +12:00
4a53aab466
Allow forcing legacy DRM interface
2017-09-23 13:20:17 +12:00
1682c0d983
Remove non-blocking flag on modesetting commits
...
This seems to make hotplugging DisplayPort MST connectors more reliable.
2017-09-10 00:13:39 +12:00
6717b78bd6
Retry atomic commit on failure
...
So we don't lose any previously "good" properties that were set.
2017-09-09 23:10:18 +12:00
0aa00da1f3
Check for disappearing DRM connectors
...
DisplayPort MST connectors will disappear when they're disconnected, so
we need to check for that.
2017-09-09 23:09:51 +12:00
6f98b5a337
Add set_gamma and get_gamma_size to wlr_output_impl
2017-09-06 18:53:08 +02:00
6daf9e9ab2
Merge pull request #120 from acrisci/feature/wlr-cursor
...
wlr_cursor
2017-08-29 12:12:18 -05:00
e3d47376dc
add wlr_cursor basic implementation
2017-08-26 08:32:11 -04:00
fb93628bda
Merge wlr_udev into wlr_session
2017-08-26 14:02:04 +12:00
f24b3df980
wlr renderer/texture: rename init to create when it does alloc
2017-08-19 08:33:31 +02:00
0252c8e072
drm realloc_crtcs: check we found an output
...
This follows-up on #105 that just initialized to 0.
Instead, make sure we actually found an output that matches
2017-08-18 18:27:59 +02:00
784cf65635
fix uninitialized warning
...
`index` might be uninitialized. Warning can be produced with gcc and `-01` flag.
2017-08-18 12:08:28 -04:00
e7fa4f12e1
Fix DRM problem introduced in 901c14c
2017-08-16 17:36:57 -04:00
901c14c409
Prevent alloc errors from crashing in `list_t`
...
This commit changes the `list_t` api so that alloc errors can be
detected and worked around. Also fixes errors not found in 5cc7342
2017-08-16 09:23:21 +02:00
c8c6619146
Refactor out wlr_output_mode_state
2017-08-14 08:03:51 -04:00
de66bdb867
Add backend detection functions
...
Resolves #80
2017-08-13 23:08:33 +02:00
41e735242d
Remove wlr_output_state, update backends
2017-08-13 11:38:03 -04:00
4386816889
wlr_backend_init -> wlr_backend_start
...
Also renames create to init. We'll use create for anything that
allocates and init for anything that takes a pointer and initializes it.
2017-08-13 10:19:57 -04:00
234b2104e4
Refactor wlr_backend_state out of DRM backend
2017-08-12 19:52:22 -04:00
de86965174
Use libinput_event_destroy/xkb_*_unref
...
Also sneak in a missing drmModeFreePlaneResources
2017-08-12 00:11:18 +02:00
0354aaeff2
Complete a few destroy functions
...
This adds missing free calls for:
- drm outputs
- libinput backend in general
- final udev free
- output mode state
2017-08-11 19:17:03 +02:00
6569c2b626
Merge pull request #53 from nyorain/drm_buffer
...
Implement drm (egl) buffer attaching
2017-08-10 22:20:21 -04:00
c24351681f
Refactor EGL handling
2017-08-10 22:15:37 -04:00
fe2fbd0fad
Fix possible use of CRTC after monitor is unplugged
2017-08-11 11:12:41 +12:00
67369173aa
Implement drm (egl) buffer attaching
2017-08-10 10:59:58 +02:00
a77fac0760
Added null check on crtc
2017-08-10 01:43:42 +12:00
af67966d92
Atomic modesetting
2017-08-09 08:07:00 -04:00
e167f41fde
Rename wlr_surface -> wlr_texture; attach -> upload
2017-08-08 18:25:16 +02:00
d09ca20a4d
Use gbm_bo_map for cursor
2017-08-07 21:07:42 +12:00
dbe66d1963
Style changes
2017-08-07 10:15:05 +12:00
5f7042a1f2
Moved headers
2017-08-06 21:49:04 +12:00
d307c2f2c2
Renamed some variables to be less generic
2017-08-06 21:42:36 +12:00
1db97a9af9
Updated DRM cursor rendering
2017-08-06 21:38:40 +12:00
aedfa27d3a
Clean up resources when plane is reassigned
2017-08-06 15:54:38 +12:00
2f8b5c4448
More cleanups
2017-08-06 15:53:41 +12:00
dd7a349295
Various cleanups
2017-08-06 15:51:49 +12:00
d1ca1ec16e
Split off some functions into drm-util
2017-08-06 15:51:49 +12:00
c46605d605
Use plane for rendering
2017-08-06 15:50:23 +12:00
e16c5504cd
Add planes.
2017-08-06 15:49:05 +12:00
67b51f0922
Upgraded CRTC and Encoder matching
2017-08-06 15:49:05 +12:00
31867a1b2e
Various changes/cleanups
2017-08-06 15:49:05 +12:00
7b772e1a4b
DRM resource initalisation
2017-08-06 15:49:02 +12:00
601bbad5d8
Added DRM property infrastructure
2017-08-06 15:47:00 +12:00
cb4d50e22c
Changed header paths.
2017-08-06 13:25:26 +12:00
d822e0768b
Use ARGB8888 pixel format for cursor bo
...
The previous pixel format (RGBA8888) is not supported on all devices for cursors.
Weston uses ARGB8888 exclusively for its cursor buffer object which leads me to
believe this pixel format is better supported.
2017-07-27 17:55:35 -04:00
8b6dc48355
bugfix: add null check on output gbm on pageflip
...
The gbm for the output might be null for the pageflip in the case that
the output has been disconnected. The gbm might be set to null by
wlr_drm_output_cleanup() in this case.
If the output is cleaned up before the pageflip, then a double free
will crash the compositor on the call to gbm_surface_release_buffer()
in the pageflip handler. The outputs buffer object bo[1] will point to
invalid memory.
2017-07-24 19:50:13 -04:00
038dfdbc85
Log max cursor size on error
2017-06-26 10:34:26 -04:00
82322d81a7
Hardware cursor improvements.
2017-06-26 19:32:36 +12:00
0cd94f0cf0
Added software cursor fallback
2017-06-26 17:34:15 +12:00
168f0955ab
Add wl_output globals for wlr_outputs
2017-06-22 14:27:35 -04:00
f4453d104d
Reorganize wlr-common
2017-06-21 12:10:07 -04:00
fd91244e83
Update everyone to use new headers
2017-06-21 10:27:45 -04:00
55854565dc
Fixed VT switching
2017-06-21 13:31:29 +12:00
091de12bf4
Changed session signal to only emit on DRM changes
2017-06-21 12:47:53 +12:00
b9d36c8149
Add dynamic output resizing for Wayland backend
...
This allows outputs to:
- Not support modesetting
- Resize themselves
2017-06-20 17:51:45 -04:00
e9609e9adf
Allocate framebuffers for hardware cursors
...
Still doesn't fix cursors though
2017-06-19 14:02:25 -04:00
7e038a6110
Add (broken) DRM hardware cursors
2017-06-16 15:38:34 -04:00
e65f83d7f2
Add more DRM info to wlr_output
...
Yes I know this is the libinput branch, I thought this would be useful
for a libinput feature (but it wasn't)
2017-06-14 16:17:05 -04:00
2b06f88f0b
Combine internal DRM headers into one
...
Everything always just included both anyway
2017-06-10 12:30:02 -04:00
63c3faa006
Fixed rendering bug: Delay calling gbm_surface_release_buffer until it
...
has been scanned out.
2017-06-09 17:15:55 +12:00
382f712792
Merge remote-tracking branch 'upstream/master' into rotation
2017-06-08 00:52:33 +12:00
632a7acb03
Filled out more wlr_output fields.
2017-06-08 00:39:40 +12:00
6f5c70ac69
Let backend track transform state
...
This will be necessary to provide it to clients via wl_output.
2017-06-06 11:48:30 -04:00
c97de93fe1
Added output rotation example
2017-06-05 22:48:51 +12:00
7d82476590
Refactor type implementations
2017-06-04 19:30:50 -04:00
5df56653ab
Changed invalidate interface.
2017-06-04 17:43:34 +12:00
de44994dfc
Udev event device matching
2017-06-03 15:47:33 +12:00
40b85d992a
Refactor udev and drm initialization
2017-06-01 20:29:10 -04:00
62d612a01e
Merge branch 'master' into session
2017-06-01 23:10:19 +12:00
ae77004346
Add more logging around udev
2017-05-31 16:53:59 -04:00
e2ee67125e
s/wayland.h/types.h/g
2017-05-31 16:24:32 -04:00
c7f6981d9c
Clean up outputs on exit
2017-05-31 16:17:04 -04:00
fee409bd0a
Generalize DPMS, remove DRM refs from example
2017-05-31 15:38:26 -04:00
03c9b46034
Have backend manage opengl context
2017-05-31 15:15:42 -04:00
f9d363fece
Added device matching
2017-05-14 13:07:34 +12:00
7efdd3c9fc
Refactored renderer startup to function.
2017-05-14 12:48:47 +12:00
ce8786721b
Got it working.
2017-05-14 12:42:49 +12:00
058b8bdf27
Working commit
2017-05-14 12:42:49 +12:00
409065ba2e
Changed to signed
2017-05-14 01:26:43 +12:00
eac603bfdf
Merge branch 'master' into refresh
2017-05-14 01:24:09 +12:00
3000b8615f
More accurate refresh rates (mHz)
2017-05-13 22:27:25 +12:00
599d1bcbdc
DPMS support
2017-05-13 20:37:15 +12:00
42878b45a1
Remove unnecessary TODO
2017-05-10 10:36:37 -04:00
00931f2f8f
Generalize output handling
2017-05-07 12:26:48 -04:00
15b1ce9e6c
Refactor backend state management
2017-05-07 10:12:54 -04:00
7e9feb70a0
Fixed hotplugging + make EGL more chatty.
2017-05-04 21:58:11 +12:00
ef9768858e
Changed modesetting interface.
2017-05-03 22:41:49 +12:00
d196a79b6c
Changed backend to accept wl_display.
2017-05-03 21:28:44 +12:00
18387468bb
Renamed 'wlr_drm_display' to 'wlr_drm_output'
2017-05-03 17:49:03 +12:00
15d247bf34
Changed drm to use new EGL interface.
2017-05-03 17:17:14 +12:00
81998fdc98
Removed old session code from DRM backend.
2017-05-03 16:23:07 +12:00
e446a5300b
Added example.
2017-05-02 18:13:17 +12:00
e9d716fc0c
Changed display to use list_t.
2017-05-02 14:34:33 +12:00
115d4ae637
Changed events to use wayland functions.
2017-05-02 14:08:34 +12:00
562d43a5ec
Changed logging.
2017-05-02 13:00:25 +12:00
41a82fd2fc
Renaming.
2017-05-01 17:49:18 +12:00
9ac46ec5ed
Got it to build
2017-05-01 15:50:19 +12:00
95a553dc51
Moved headers to the correct place.
2017-05-01 15:33:42 +12:00
aca13320b3
Inital commit of libotd.
2017-05-01 15:20:48 +12:00
Vincent Vanlaer
emersion
Markus Ongyerth
Guido Günther
Tony Crisci
Timidger
Drew DeVault
Dominique Martinet
Scott Anderson
Versus Void
Heghedus Razvan
Calvin Lee
nyorain