Commit Graph

372 Commits

Author SHA1 Message Date
Scott Anderson 1a2b3445dc Remove unused data from gbm_bo userdata
These aren't used anymore and crashes when the gbm_bo tries to get
destroyed (e.g. on hotplug).
2018-08-04 17:02:53 +12:00
Scott Anderson 4bee710c30 Fix hardware cursor on secondary GPU
Create rendering resources on parent GPU, so that we can sample the
passed in texture properly. The cursor buffer needs to remain on the
same GPU.
2018-08-04 15:08:28 +12:00
Mariusz Bialonczyk e547e55be0 multi-gpu: do not flip screens on secondary GPU
All screens on secondary GPU in multiple GPU configurations
was flipped 180.

The flipped screens was always on secondary card (the primary card
was always correct).

Tested on nouveau with:
WLR_DRM_DEVICES=/dev/dri/card1:/dev/dri/card2
WLR_DRM_DEVICES=/dev/dri/card2:/dev/dri/card1

The commit is fixing this problem. Now all screens are "normal".
2018-08-03 07:43:22 +02:00
Mariusz Bialonczyk 15dacebc36 multi-backend: do not expose internal renderers
backend_get_renderer() is now returning the renderer of the primary GPU, instead
of its own renderer, since that's the thing which actually does all of the "real"
rendering

wlr_multi_backend_add() is now adding all subbackends (otherwise only one GPU
is handled).

credits: @ascent12
2018-08-03 07:43:22 +02:00
emersion 364afced3e backend/drm: remove unnecessary casts 2018-08-02 23:33:59 +01:00
emersion 2ebecb6727 backend/drm: allow to pass empty gamma ramp to reset it 2018-08-02 23:33:59 +01:00
emersion a149c2370a Implement wlr-gamma-control-unstable-v1 2018-08-02 23:33:04 +01:00
emersion 7cbef15206
util: add wlr_ prefix to log symbols 2018-07-09 22:49:54 +01:00
Drew DeVault be54278207
Merge pull request #1095 from agx/output-add-mode
Allow to add additional modes to outputs
2018-07-07 08:58:17 -07:00
Guido Günther 8d72090afe drm: Allow to add additional modes
This allows to add additional modes to the list of available video modes
using VESA Coordinated Video Timing information.

Closes #1080
2018-07-07 14:51:39 +02:00
emersion 2b9cbaddf3
screencopy: add support for frame flags 2018-06-30 22:18:03 +01:00
Dominique Martinet f0d455f088 drm backend: overflow fixes
These operations are done in 32-bit arithmetics before being casted to 64-bit,
thus can overflow before the cast.
Casting early fixes the issue.

Found through static analysis
2018-06-30 11:21:22 +09:00
emersion 21928cbe61
Merge branch 'master' into screencontent 2018-05-31 12:33:27 +01:00
emersion 28020ff577
Only allow one modifier per DMA-BUF, split attributes struct in render/ 2018-05-30 09:29:12 +01:00
emersion bd430b8620
backend/drm: support multi-planar DMA-BUFs when exporting 2018-05-29 18:47:17 +01:00
emersion 9e26808c28
output, backend/drm: add wlr_output_export_dmabuf 2018-05-29 18:45:45 +01:00
emersion 79683ee497
backend/drm: better connector cleanup, add more logs 2018-05-27 13:21:41 +01:00
emersion 6eb4b5b54d
Merge pull request #993 from emersion/bind-wl-drm-in-renderer
render: bind wl_drm in renderer
2018-05-25 13:54:16 +01:00
Ilia Bozhinov 24cf70ae96 backends: implement custom EGL and renderer initialization
Compositors now have more control over how the backend creates its
renderer. Currently all backends create an EGL/GLES2 renderer, so
the necessary attributes for creating the context are passed to a
user-provided callback function. It is responsible for initializing
provided wlr_egl and to return a renderer. On fail, return 0.

Fixes #987
2018-05-25 14:56:52 +03:00
emersion 41130fe54b
render: bind wl_drm in renderer 2018-05-21 19:07:08 +01:00
Markus Ongyerth 6a46fcc6f2 recalculate cursor projection matrix on set_cursor
Updates the projection matrix for the cursor plane in the DRM backend,
when the cursor is set, so new cursor are uploaded with the correct
transformation.
2018-05-16 15:44:41 +02:00
emersion 13098a18ea
Fix hardware cursors scale & transform 2018-05-09 19:58:18 +01:00
emersion caf9f9022c
Merge pull request #936 from emersion/full-hardware-cursors
output: always use hardware cursors if available
2018-05-04 19:00:45 +01:00
morganamilo 6305e6327f
Fix typos in comments and strings 2018-05-03 21:59:43 +01:00
Guido Günther 1637053ef8 drm: only disable atomic modesetting when WLR_DRM_NO_ATOMIC == 1
Don't allow any value of the env var to disable atomic mode setting.
2018-05-03 15:37:37 +02:00
emersion 225d182765
output: always use hardware cursors if available
This changes the `wlr_output_impl.set_cursor` function to take a
`wlr_texture` instead of a byte buffer. This simplifies the
DRM and Wayland backends since they were creating textures from
the byte buffer anyway.

With this commit, performance should be improved when moving the
cursor since outputs don't need to be re-rendered anymore.
2018-05-01 21:38:04 +01:00
emersion 625a7a48dc
Don't use the wlr_ prefix for static functions 2018-04-25 23:51:00 +01:00
emersion 71ca45e2c0
Make sure we don't use others' prefixes 2018-04-25 23:24:58 +01:00
emersion b0d99f5c67
Remove wlr_ prefix from local symbols 2018-04-25 23:00:46 +01:00
emersion 018b82c01e
render/egl: allow passing NULL to surface and image destructors 2018-04-25 08:28:48 +01:00
emersion eaed6bd03b
render/egl: add wlr_egl_destroy_surface 2018-04-24 23:44:43 +01:00
emersion 94fa6c88f4
output: don't emit the mode event if it hasn't changed
This also fixes #535.
2018-04-18 00:15:25 +01:00
emersion d2ebbd103c
backend: remove wlr_backend_get_egl 2018-04-08 11:00:56 -04:00
Drew DeVault b60e31e5c0
Merge pull request #794 from emersion/renderer-untie-backend
Untie wlr_backend from wlr_renderer
2018-03-31 21:31:15 -04:00
emersion a2391a6047
Fix cursor transform on DRM backend 2018-03-31 20:55:31 -04:00
emersion 33a2eb4b77
Untie wlr_backend from wlr_renderer 2018-03-31 18:49:43 -04:00
Drew DeVault 324b9d910d Remove width_mm from wlr_touch events 2018-03-28 11:04:40 -04:00
emersion 3bda7e2ef8
Use DRM_FORMAT_MOD_LINEAR instead of a hardcoded constant 2018-03-26 12:00:08 -04:00
emersion c63d94483b
Redesign wlr_texture
- Textures are now immutable (apart from those created from raw
  pixels), no more invalid textures
- Move all wl_drm stuff in wlr_renderer
- Most of wlr_texture fields are now private
- Remove some duplicated DMA-BUF code in the DRM backend
- Add more assertions
- Stride is now always given as bytes rather than pixels
- Drop wl_shm functions

Fun fact: this patch has been written 10,000 meters up in the air.
2018-03-24 23:48:32 -04:00
emersion a854c2f246
Merge branch 'master' into gles2-renderer-redesign 2018-03-23 00:55:55 +01:00
emersion 60bfe0a6aa
backend/drm: remove remaining raw GL call
This makes the hardware cursor code a less efficient. Can be
fixed with a GLES3 renderer.
2018-03-21 11:34:08 +01:00
emersion b1f93bc5cc
render/egl: use EGL_KHR_debug 2018-03-21 10:42:43 +01:00
emersion 3581573bdc
render/gles2: make wlr_renderer_begin take viewport size
This allows raw GL calls outside wlr_renderer to be removed.
2018-03-21 07:37:09 +01:00
emersion c41de2d1be
render: split render.h into wlr_renderer.h and wlr_texture.h 2018-03-19 23:16:29 +01:00
emersion 6227da96b1
backend/drm: don't hardcode matrix 2018-03-18 11:34:23 +01:00
emersion 7894fca224
matrix: rename wlr_matrix_texture to wlr_matrix_projection 2018-03-15 21:26:45 +01:00
emersion 876f07e9f1
renderer: replace wlr_texture_get_matrix by wlr_render_texture 2018-03-15 19:31:02 +01:00
emersion 824a95ad19
matrix: use 2D matrices 2018-03-15 15:33:58 +01:00
emersion d26b67cb06
matrix: unify API, don't use array pointers 2018-03-15 11:10:56 +01:00
emersion b6a3f240c7
matrix: move to types/ 2018-03-15 09:11:27 +01:00
emersion d24f868bbe
backend/drm: fix cursor hotspot not updated 2018-03-12 19:34:43 +01:00
emersion 92ca4ad474
backend/drm: refactor wlr_drm_connector_set_cursor 2018-03-11 11:40:03 +01:00
Markus Ongyerth 2cea430488 prevent current_mode null on output_enable(false)
The current mode was set to NULL to abuse it as state variable
persisting DRM suspend/resume, this results resulted in a segfault on
normal DPMS cycle.

This reverts that change and uses the wlr_output enabled variable, which
also persists and makes more sense.
2018-03-01 15:48:25 +01:00
Markus Ongyerth a65ef8ea86 restore dpms state on drm resume
If there is no current mode, set outputs to dpms off in drm resume.
Sets current mode to null on disable to ensure this can be checked.
2018-02-26 18:12:51 +01:00
Guido Günther d08792bfff Add alpha to wlr_render_with_matrix
so we can use the alpha channel to e.g. blend in textures
2018-02-25 13:47:48 +01:00
Drew DeVault 1d9be89e2d
Revert "ELF Visibility" 2018-02-19 18:01:27 -05:00
Scott Anderson 86269052eb Explicitly export EFL symbols 2018-02-19 14:26:40 +13:00
emersion c2e1474010
Reformat all #include directives 2018-02-12 21:29:23 +01:00
emersion 36ead80cd1
Make wlr_signal_emit_safe private 2018-02-12 19:52:47 +01:00
emersion 10ecf871f2
Remove wlr_backend.events.{output_remove,device_remove} 2018-02-12 10:36:43 +01:00
emersion 5e58d46cc1
Add wlr_signal_emit_safe 2018-02-12 09:12:31 +01:00
Drew DeVault 664d7bfe4e
Merge pull request #618 from VincentVanlaer/atomic-gamma
Add atomic gamma control
2018-02-10 09:51:09 -05:00
Vincent Vanlaer 7cb828ac70 Fallback gamma on legacy if properties don't exist 2018-02-10 10:24:49 +01:00
emersion bf6d245400
Swap buffers with damage 2018-02-09 22:54:14 +01:00
Vincent Vanlaer dd69d7b764 Use VLA instead of heap alloc 2018-02-09 19:37:01 +01:00
Vincent Vanlaer 0232269a2d Fix style 2018-02-09 19:35:44 +01:00
Vincent Vanlaer b2f6941617 Free gamma when property blob creation fails 2018-02-09 18:54:56 +01:00
Vincent Vanlaer 2df97ed16a Set needs_swap on output when gamma changes 2018-02-09 17:29:14 +01:00
Vincent Vanlaer f5e5d1983b Do not allow gamma control without a crtc 2018-02-09 17:29:14 +01:00
Vincent Vanlaer ab011406ad Add atomic gamma lut size fetching
Legacy gamma lut size now uses the new legacy_crtc member of
wlr_drm_crtc. This was Previously doen using old_crtc in
wlr_drm_connector, but since this refers to the crtc that was connected to
the ouput, this could give the wrong result.
2018-02-09 17:29:14 +01:00
Vincent Vanlaer cc1229e75e Add atomic gamma setting 2018-02-09 17:29:04 +01:00
emersion cdd55b5d19
Merge remote-tracking branch 'upstream/master' into output-damage 2018-02-09 14:50:26 +01:00
Markus Ongyerth 08fda567d2 prevents reuse of outdated wlr_output state
On the drm output the wlr_drm_connector structs are reused.
This struct contains the wlr_output struct, which is reused as well.
The old code kept modes/edid and output state persistent over hotplug.
This nulls the relevant strings, reads newer edid data and removes old
modes on unplug.
2018-02-06 22:45:37 +01:00
emersion 3d3ea32137
Merge remote-tracking branch 'upstream/master' into output-damage 2018-02-03 00:15:44 +01:00
emersion bb39277e97
backend/drm: update output enabled property on modeset 2018-02-02 22:28:08 +01:00
emersion bb4aeb3b2f
backend/drm: support updating cursor when session is paused 2018-02-02 21:01:59 +01:00
emersion babdd6ccf7
backend: fix use-after-free when destroying backends
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.

The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
2018-01-30 19:45:57 +01:00
Guido Günther c5aac77692 Fix some typos
Prefer initialize over initialise since used more often in the sources.
2018-01-30 16:10:07 +01:00
emersion f152fdb4c5
Merge pull request #594 from Ongy/drm-surface-buffers
relases gbm buffers on init
2018-01-30 11:04:01 +01:00
emersion d498855b9d
backend/drm: fix hw cursor position on rotated and scaled outputs
output: add wlr_output_transformed_resolution
2018-01-30 10:23:35 +01:00
emersion 51c22d39a4
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-29 23:24:09 +01:00
Tony Crisci ed5b1fdedd
Merge pull request #580 from emersion/screenshooter-renderer-backport
Backport screenshooter fixes from the renderer redesign v1
2018-01-29 17:13:23 -05:00
Markus Ongyerth cde0f454b3 Clean up the gbm/egl as well 2018-01-29 11:49:31 +01:00
Markus Ongyerth 2cdb646531 relases gbm buffers on init
The wlr_drm_surface_init function is called (upon others) when the drm
mode is changed.
When the surface was used previously this replaced the gbm_surface, but
did not replace the gbm buffers (front/back).
With this, wlr_drm_surface_get_from never set up the new buffers with
the new glViewport because surf->front existed.

This frees the buffers to get new buffers on the new surface with the
new viewport.
2018-01-29 11:29:54 +01:00
emersion b47e8c4a1d
backend/drm: do not retry pageflip when swapping buffers 2018-01-28 23:33:38 +01:00
emersion 20e6861021
Do not flush damage if swapping buffers failed
This should solve issues with multiple outputs on DRM backend.
2018-01-28 22:39:24 +01:00
emersion 1ee61dbd0f
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-28 21:22:50 +01:00
Guido Günther d7dfbd23fa drm: Use ptrdiff_t instead of intmax_t in format string
since we're looking at pointer differences.

Otherwise the build fails on arm like

In file included from ../backend/drm/drm.c:19:0:
../include/wlr/util/log.h:34:17: error: format '%jd' expects argument of type 'intmax_t', but argument 7 has type 'int' [-Werror=format=]
  _wlr_log(verb, "[%s:%d] " fmt, _strip_path(__FILE__), __LINE__, ##__VA_ARGS__)
                 ^
../backend/drm/drm.c:462:2: note: in expansion of macro 'wlr_log'
  wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
  ^~~~~~~
../backend/drm/drm.c:462:39: note: format string is defined here
  wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
                                     ~~^
                                     %d
2018-01-27 12:29:56 +01:00
emersion 7adf13e284
Fix flickering when switching VT 2018-01-27 11:16:42 +01:00
emersion 8d58ed502b
output: add wlr_output_schedule_frame 2018-01-26 22:39:23 +01:00
emersion ece2c1e4e2
Damage tracking for transformed outputs 2018-01-26 22:11:09 +01:00
Vincent Vanlaer 72507f9820 Clean up session signal handler on drm init fail 2018-01-24 18:27:53 +01:00
emersion 4fa90b0511
Backport screenshooter fixes from the renderer redesign v1
This backports some changes to #319 to fix the screenshooter data
format. This also adds wlr_backend_get_renderer which will be
useful to support multiple renderers.
2018-01-23 22:06:54 +01:00
emersion 59c53e8333
Merge remote-tracking branch 'upstream/master' into output-damage 2018-01-21 22:18:06 +01:00
Timidger f8b9f44ff5
Add con/crtc null check to move_cursor in drm 2018-01-21 15:47:02 -05:00
Timidger 9d4ea146b6
Added crtc null check for other drm funcs 2018-01-21 15:37:23 -05:00
Timidger 4478cf1ddc
Fixes #575 2018-01-21 14:57:24 -05:00
emersion 0365b587f0
output: add damage tracking via buffer age 2018-01-21 00:06:35 +01:00
emersion 4ca38b84ed
backend/drm: fix hardware cursors not moving
This adds back `wlr_output::needs_swap`. This allows a backend to
request buffer swaps even if the output isn't damaged. This is
needed by the DRM backend to trigger pageflips when the cursor
moves.
2018-01-20 16:43:14 +01:00
emersion 584f06ad2f
backend/drm: do not try a pageflip is another one is in pending 2018-01-19 23:46:40 +01:00
emersion f0f97280a0
backend/drm: fix retry pageflip 2018-01-19 23:35:23 +01:00
Drew DeVault b331c5c2c5
Merge pull request #549 from emersion/output-enabled
Add wlr_output::enabled
2018-01-15 20:53:13 -05:00
emersion 0eebaf98d0
drm: do not pageflip when enabling output 2018-01-15 21:49:37 +01:00
Guido Günther 3101c300b1 Don't crash if crtc->cursor is NULL
Same as what atomic_crtc_set_cursor does

 Core was generated by `_build/rootston/rootston'.
 Program terminated with signal SIGSEGV, Segmentation fault.
 0  0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
 170		if (!crtc || !crtc->cursor) {
 (gdb) bt
 0  0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
 1  0xb6f2a856 in wlr_drm_connector_move_cursor (output=0x2242b28, x=0, y=0) at ../backend/drm/drm.c:634
 2  0xb6f3cea0 in wlr_output_cursor_set_image (cursor=0x21a0338, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4) at ../types/wlr_output.c:516
 3  0xb6f39da2 in wlr_cursor_set_image (cur=0x22cfc90, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4, scale=1) at ../types/wlr_cursor.c:310
 4  0xb6f44d2a in wlr_xcursor_manager_set_cursor_image (manager=0x22cfd10, name=0x434420 "left_ptr", cursor=0x22cfc90) at ../types/wlr_xcursor_manager.c:80
 5  0x00431c0a in roots_seat_configure_xcursor (seat=0x22cef08) at ../rootston/seat.c:515
 6  0x0043137c in roots_seat_init_cursor (seat=0x22cef08) at ../rootston/seat.c:210
 7  0x004315ec in roots_seat_create (input=0x218d220, name=0x434594 "seat0") at ../rootston/seat.c:289
 8  0x0042ecba in input_get_seat (input=0x218d220, name=0x434594 "seat0") at ../rootston/input.c:39
 9  0x0042ed04 in input_add_notify (listener=0x218d228, data=0x218d3b0) at ../rootston/input.c:54
 10 0xb6f2f2e6 in wl_signal_emit (signal=0x1ea548c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
 11 0xb6f2f572 in input_add_reemit (listener=0x1ea9990, data=0x218d3b0) at ../backend/multi/backend.c:101
 12 0xb6f2db7e in wl_signal_emit (signal=0x1ea992c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
 13 0xb6f2ddaa in handle_device_added (backend=0x1ea9920, libinput_dev=0x2292598) at ../backend/libinput/events.c:87
 14 0xb6f2e164 in wlr_libinput_event (backend=0x1ea9920, event=0x2292b78) at ../backend/libinput/events.c:198
 15 0xb6f2d678 in wlr_libinput_readable (fd=23, mask=1, _backend=0x1ea9920) at ../backend/libinput/backend.c:28
 16 0xb6f2d7c0 in wlr_libinput_backend_start (_backend=0x1ea9920) at ../backend/libinput/backend.c:74
 17 0xb6f27170 in wlr_backend_start (backend=0x1ea9920) at ../backend/backend.c:30
 18 0xb6f2f320 in multi_backend_start (wlr_backend=0x1ea5480) at ../backend/multi/backend.c:22
 19 0xb6f27170 in wlr_backend_start (backend=0x1ea5480) at ../backend/backend.c:30
 20 0x0042fbc6 in main (argc=1, argv=0xbe89dd04) at ../rootston/main.c:60
2018-01-15 13:37:53 +01:00
emersion 53ba9b4eec
Fix output enable in DRM backend 2018-01-07 00:28:21 +01:00
emersion 771263380c
Add wlr_output::enabled 2018-01-04 12:46:15 +01:00
Dominique Martinet 8e24aaa3c6 style: fix sizeof() calls without parentheses 2017-12-28 16:28:19 +01:00
emersion e737f65e38
Fix cursor on transformed output with DRM backend 2017-12-26 18:16:37 +01:00
Tony Crisci a937016e38 remove session from multibackend 2017-12-19 18:25:46 -05:00
Dominique Martinet be95147385 drm backend: add wlr_output_is_drm 2017-12-19 20:13:49 +01:00
emersion b99d1f4fcc
Refactor wlr_egl_init to accept config_attribs 2017-12-17 23:51:04 +01:00
emersion 0256de0002
Add full refresh rate support to custom modes 2017-12-17 18:02:55 +01:00
Drew DeVault 23fb663ea4
Merge pull request #453 from emersion/surface-transform
Add surface transforms support
2017-12-14 14:43:04 -05:00
emersion 466e86b7b2
Merge branch 'master' into surface-transform 2017-12-14 20:31:18 +01:00
emersion 75ef7860bb
Merge branch 'master' into display-destroy 2017-12-14 20:29:30 +01:00
emersion 3b4b8953d9
Update output layout when scale or transform changes 2017-12-12 21:58:00 +01:00
emersion c67a5824b8
Merge branch 'master' into display-destroy 2017-12-11 16:14:03 +01:00
emersion 18eb1eee3f
Listen to display destroy in xwayland, rename wlr_egl_free 2017-12-08 00:59:37 +01:00
emersion 9d43adaafa
Listen to display destroy in backends 2017-12-07 23:44:59 +01:00
emersion 91d72040e5
Configure outputs with make, model, serial in rootston
Added fallbacks in DRM backend in case EDID extension data for model and serial is missing.

Updates #403
2017-12-07 13:59:19 +01:00
emersion 8af779fae6
Fix segfault when moving hardware cursor 2017-12-05 22:23:01 +01:00
emersion 6a69b4419f
Make wlr_output_transform_* functions public, refactoring 2017-12-01 09:15:33 +01:00
Scott Anderson bc113c16aa Use correct include path for glapi.h 2017-11-30 10:32:55 +13:00
emersion 09279b90a6
Add wlr_output.serial 2017-11-11 19:09:34 +01:00
Dominique Martinet f451ea3639 rootston exit: fix drm destroy
wlr_drm_connector were being freed without removing them
from the drm->outputs list, segfaulting on destroy
2017-11-01 19:37:35 +01:00
emersion a15b35aa10
Remove mysterious hotspot switch in DRM backend 2017-11-01 14:36:58 +01:00
emersion 60c018c017
Fix hidden software cursors, fix cursor transformations on DRM backend 2017-11-01 14:25:41 +01:00
emersion 0beae99188
Apply output transformation to pointer events in Wayland backend 2017-11-01 11:00:27 +01:00
emersion c3b09f73da
Fix cursor hotspot with rotated outputs on DRM backend 2017-10-31 12:30:57 +01:00
emersion 6656e25fd4
Transform cursor hotspot 2017-10-31 12:30:56 +01:00
emersion 1b6c729360
Add wlr_output_cursor 2017-10-31 12:30:03 +01:00
Drew DeVault fa9c6ecc53 Fix segfault in DRM cursor 2017-10-28 15:09:38 -04:00
emersion 9d587d759f
Do not set hw cursor if disabled when switching VT 2017-10-26 18:58:44 +02:00
Scott Anderson 75f0a6c998 Merge pull request #286 from versusvoid/update-connector-crtc-bindings
Update Connector-CRTC bindings after resume in DRM backend
2017-10-23 20:25:40 +13:00
Versus Void 3ed3271b98 Rescan connectors on DRM resume 2017-10-22 21:44:24 +00:00
Versus Void 549777ca19 Set crtc field when scanning for DRM connectors
and always use it when matching CRTCs with connectors.
Fix deactivated monitors check.
2017-10-22 21:38:30 +00:00
Versus Void 3c31209a97 Reinitialize only changed DRM outputs after setting mode on one 2017-10-22 21:34:56 +00:00
Versus Void ecb2a2b0d3 Emit output resolution event only when resolution changes 2017-10-22 21:34:56 +00:00
emersion 1cc8f21d8e
Cleanup wlr_gamma_control 2017-10-22 23:11:26 +02:00
emersion e1d213fccd
Create globals only for enabled outputs in DRM backend 2017-10-22 22:21:23 +02:00
Versus Void 2ab080e79a Fix index computation in DRM output scan and CRTC match 2017-10-22 10:54:09 +00:00
Drew DeVault 16f35ecbea Merge branch 'master' into heghe/wl_list 2017-10-21 22:03:48 -04:00
Drew DeVault 169b68b17c Rename remaining refs to wlr_list 2017-10-21 22:02:36 -04:00
Scott Anderson bdeffad7e5 Remove drm field from wlr_drm_connector 2017-10-22 10:36:07 +13:00
Scott Anderson 822a9f65a4 Add pointer to backend inside wlr_output 2017-10-22 10:36:07 +13:00
Scott Anderson 4ea84c5765 Remove unnecesary wlr_renderers 2017-10-22 10:36:07 +13:00
Scott Anderson 9b984253e2 Move egl.h to render/egl.h 2017-10-22 10:36:07 +13:00
Heghedus Razvan e1f196a3e9 Replace list_t with wl_list for wlr_input_device
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:50:43 +03:00
Heghedus Razvan 1d716241af Replace list_t with wl_list in wlr_output
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:46:09 +03:00
Heghedus Razvan c03e774636 Replace list_t with wl_list in wlr_drm_backend
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:46:03 +03:00