Commit Graph

1707 Commits

Author SHA1 Message Date
Simon Ser a4ccca0834 scene: add support for direct scan-out
Check if only a single node intersects with the output viewport
and all of its properties match. In this case, attempt direct
scan-out.
2021-10-23 00:49:07 +02:00
Simon Ser db4c93028d scene: add wlr_scene_output_for_each_surface
This allows compositors to more easily implement sending
wl_surface.frame callback done events.
2021-10-22 22:29:35 +02:00
Kirill Primak 6c3a71d9f6 presentation-time: use a surface addon 2021-10-22 11:57:19 +02:00
Simon Ser f7ea33da0a scene: remove surface commit listener when node is destroyed 2021-10-18 16:25:19 +02:00
Kirill Primak 2edf468aeb presentation-time: don't send presented on discard 2021-10-15 09:38:58 +02:00
Kirill Primak 2af8cc769a output: add presented flag to presentation event 2021-10-15 09:38:58 +02:00
Kirill Primak 1089b7b8d6 output: disallow NULL event for wlr_output_send_present() 2021-10-15 09:38:58 +02:00
Isaac Freund 4fae8f7be3 scene: add functions to place node on top/bottom
These are very common operations for compositors (including tinywl)
to perform.
2021-10-14 21:10:03 +02:00
Isaac Freund 2a8d385386 scene: assert that node != sibling in place above/below
Currently these functions remove the node from the scene if the sibling
argument is the same node as the node. To prevent confusion when
misusing this API, assert that the nodes are distinct and document this.
2021-10-14 21:10:03 +02:00
Kirill Primak c3e54021f8 xdg-decoration: refactor configure/state flow
The same logic/motivation as xdg-toplevel.
2021-10-07 07:27:51 -06:00
Kirill Primak cdaab82020 layer-shell: move NULL buffer check to role precommit handler
This will allow compositor to access the current buffer before
unmapping.
2021-10-06 10:15:49 +02:00
Kirill Primak 28248dd83b xdg-shell: remove redundant NULL buffer check
This is already checked in role precommit handler, and if the buffer is
NULL due to failed upload, that means the surface was already unmapped.
2021-10-06 10:15:49 +02:00
tiosgz ce66244fd2 surface_at: check if surfaces are mapped 2021-10-02 11:38:40 +02:00
tiosgz 893434b2d4 for_each_surface: only iterate mapped surfaces
These functions are used mostly for rendering, where including unmapped
surfaces is undesired.

This is a breaking change. However, few to no usages will have to be
updated.
2021-10-02 11:38:40 +02:00
Simon Ser 1d7e438d8a Revert "Require INVALID for implicit format modifiers"
This reverts commit ea7357b703.
2021-10-01 09:26:05 -06:00
Simon Ser ea7357b703 Require INVALID for implicit format modifiers
See [1] for the motivation.

[1]: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/75
2021-10-01 09:21:50 -06:00
Simon Ser 744a5c2fef xdg-shell: stop clearing wlr_xdg_surface state on unmap
The protocol doesn't say we should, so let's not.

Also it's pointless to reset scheduled_serial, since 0 is a valid
serial.
2021-09-30 23:17:32 +03:00
Simon Ser 665a164f27 xdg-shell: rename wlr_xdg_surface.next_configure_serial
Rename it to scheduled_serial for consistency with the rest of
wlroots.
2021-09-30 23:17:32 +03:00
Simon Ser 0e34208344 xdg-shell: introduce wlr_xdg_surface.current
This holds the current state, and avoids having ad-hoc fields in
wlr_xdg_surface.
2021-09-30 23:17:32 +03:00
Kirill Primak db4afc2408 xdg-surface: add pending state
struct wlr_xdg_surface_state is introduced to hold the geometry
and configure serial to be applied on next wl_surface.commit.

This commit fixes our handling for ack_configure: instead of making
the request mutate our current state, it mutates the pending state
only.

Co-authored-by: Simon Ser <contact@emersion.fr>
2021-09-30 23:17:32 +03:00
José Expósito 20d9448257 wlr_pointer_gestures: hold gestures (protocol v3)
Update the pointer gestures protocol to version 3 allowing to send hold
gestures to clients.
2021-09-27 15:30:31 +02:00
José Expósito 5f3e490c80 wlr_pointer_gestures: update protocol to version 2 2021-09-27 15:30:31 +02:00
José Expósito 4c3e307ec8 cursor: emit hold gesture events
Recevie the hold gesture events from the libinput or Wayland backends,
abstracted as pointer signals, and re-emit them from the cursor
interface.
2021-09-27 15:30:31 +02:00
José Expósito d069a783bc pointer: add hold pointer event definition
As touchpad touches are generally fully abstracted, a client cannot
currently know when a user is interacting with the touchpad without
moving. This is solved by hold gestures.

Hold gestures are notifications about one or more fingers being held
down on the touchpad without significant movement.

Hold gestures are primarily designed for two interactions:

 - Hold to interact: where a hold gesture is active for some time a
   menu could pop up, some object could be selected, etc.
 - Hold to cancel: where e.g. kinetic scrolling is currently active,
   the start of a hold gesture can be used to stop the scroll.

Unlike swipe and pinch, hold gestures, by definition, do not have
movement, so there is no need for an "update" stage in the gesture.

Create two structs, wlr_event_pointer_hold_begin and
wlr_event_pointer_hold_end, to represent hold gesture events and the
signals to emit them: wlr_pointer->pointer.hold_begin/hold_end.
2021-09-27 15:30:31 +02:00
Kirill Primak 754f40f9cb layer-shell: add `committed` bitmask 2021-09-24 14:38:32 +02:00
Kirill Primak 59fa3637c3 layer-shell: refactor configure/state flow
Same logic as xdg-toplevel.
2021-09-23 21:22:41 +02:00
Simon Ser 3c26244340 scene: add wlr_scene_buffer_set_transform 2021-09-22 10:45:39 -06:00
Simon Ser 43833fba64 scene: add wlr_scene_buffer_set_dest_size 2021-09-22 10:45:39 -06:00
Simon Ser 3d4afbe945 scene: use scene_node_get_size in wlr_scene_node_at
This allows to unify the RECT and BUFFER code-paths. The BUFFER one
will become more complicated with destination size and transforms.
2021-09-22 10:45:39 -06:00
Simon Ser 27b529f8a0 scene: add scene_node_get_size helper 2021-09-22 10:45:39 -06:00
Simon Ser 63040d6744 scene: add wlr_scene_buffer_set_source_box 2021-09-22 10:45:39 -06:00
Simon Ser 7939bf8cc6 scene: add wlr_scene_buffer
This new scene-graph node displays a wlr_buffer.

Closes: https://github.com/swaywm/wlroots/issues/3161
2021-09-22 10:45:39 -06:00
Simon Ser f6f0e010d1 scene: unify intersection logic in wlr_scene_node_at
Let's extract the common bits.
2021-09-22 10:45:39 -06:00
Simon Ser b25759cd20 scene: drop default case in wlr_scene_node_at
This allows the compiler to error out if we haven't enumerated all
of the cases. This is useful to avoid a missing implementation when
adding a new node type.
2021-09-22 10:45:39 -06:00
Tadeo Kondrak 30d3c76817 Implement input_method_v2 popups 2021-09-22 09:42:14 +02:00
Simon Ser 2e590026e9 scene: add wlr_scene_subsurface_tree_create 2021-09-21 16:48:31 +02:00
Simon Ser 597ba2b932 surface: add addon set 2021-09-21 16:48:31 +02:00
Simon Ser 211b3b760e scene: add wlr_scene_tree 2021-09-21 16:48:31 +02:00
Kirill Primak ccc84f11a4 xdg surface: check adding configure_idle for NULL 2021-09-21 10:09:09 +02:00
Kirill Primak 0e2d369106 xdg-surface: simplify configure mechanism
This commit removes any checks whether a configure will change anything
and makes configures be sent unconditionally. Additionally, configures
are scheduled on xdg_toplevel.{un,}set_{maximized,fullscreen} events.
2021-09-21 10:09:09 +02:00
Kirill Primak b72a217fcc xdg-toplevel: refactor configure/state flow
Previously, `wlr_xdg_toplevel` didn't follow the usual "current state +
pending state" pattern and instead had confusingly named
`client_pending` and `server_pending`. This commit removes them, and
instead introduces `wlr_xdg_toplevel.scheduled` to store the properties
that are yet to be sent to a client, and `wlr_xdg_toplevel.requested`
to store the properties that a client has requested. They have different
types to emphasize that they aren't actual states.
2021-09-21 10:09:09 +02:00
Simon Zeni 9579d62a16 types/buffer: make {begin,end}_data_ptr_access part of the public API 2021-09-15 11:50:44 +02:00
Kirill Primak 52da68b591 xdg popup: move function to a file it belongs to 2021-09-11 12:11:55 +02:00
Simon Ser 4e7a8707cc buffer: add data_ptr access flags
This allows callers to specify the operations they'll perform on
the returned data pointer. The motivations for this are:

- The upcoming Linux MAP_NOSIGBUS flag may only be usable on
  read-only mappings.
- gbm_bo_map with GBM_BO_TRANSFER_READ hurts performance.
2021-09-10 13:16:10 -04:00
Andri Yngvason 105fdecd0c screencopy: Handle shm copy in commit event handler
This simplifies the implementation considerably.
2021-09-10 10:37:18 +02:00
Andri Yngvason 04d234bac1 screencopy: Use output->front_buffer instead of wlr_output_export_dmabuf 2021-09-10 10:37:18 +02:00
Simon Ser a181a37b12 scene: add wlr_scene_attach_output_layout
This is a helper to integrate wlr_scene with wlr_output_layout.
2021-09-09 12:04:35 +02:00
Simon Ser 7832005a1f scene: move source to subdir
This will allow more scene-graph extensions to be added without
cluttering wlr_scene.c, for instance for sub-surface handling and
wlr_output_layout integration.
2021-09-09 12:04:35 +02:00
Quantum 679f5ed966 scene: fix compile error in release builds
On release builds, gcc detects a variable uninitialized error, and generates
a warning, which gets converted to an error due to -Werror.
2021-09-09 10:01:48 +02:00
Simon Ser 44f0f7a0a7 scene: add damage tracking support 2021-09-08 09:50:08 -04:00