Commit Graph

1116 Commits

Author SHA1 Message Date
Scott Anderson b58e8451b8 backend: Do not attempt DRM on X11/WL failure
This can really mess with the session if logind is not being used,
and it's going to always fail anyway.
2019-11-18 11:53:17 +01:00
Simon Ser 6c649bab53 output: add wlr_output_event_present.commit_seq
This is set to the value of wlr_output.commit_seq when the frame has
been submitted. This allows tracking presentation with more then 1 full
frame of latency.

References: https://github.com/swaywm/wlroots/issues/1917
2019-11-17 00:12:59 +01:00
Simon Ser cde544de81 backend/wayland: expose remote objects
Expose the remote wl_display, wl_surface and wl_seat used by the Wayland
backend.

This allows compositors to customize the Wayland backend and to have
more freedom. For instance a compositor might want to handle clipboard
and drag-and-drop from the remote Wayland compositor. Another compositor
might want to setup pointer constraints.
2019-11-13 10:15:28 -05:00
Simon Ser 1e568d84df backend/wayland: add support for relative-pointer-unstable-v1
We just send relative motion events alongside absolute motion events.
Compositors can figure out how absolute and relative events are related
(e.g. whether they have been triggered by the same logical event) with
the frame event.
2019-11-13 10:15:19 -05:00
Scott Anderson 626c98d754 session/logind: Clean up add_signal_matches
The original signal matching was using the old interface before
sd_bus_match_signal was added, which the new code uses.
Change them all to use it now.
2019-11-03 10:13:47 +01:00
Ronan Pigott 3ebf079a9a session/logind: support CanGraphical property 2019-11-03 00:17:23 +00:00
Scott Anderson a3c3b928a3 backend/x11: Give X11 a real rendering loop
Makes use of the present extension to get notified of vsync, and not
require any stupid timer hacks. Also make use of the present version of
ConfigureNotify, because why not?
2019-11-02 12:43:33 +01:00
Simon Ser 0e57effd38 backend/drm: add support for custom modes
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-27 10:46:47 -04:00
Simon Ser e97c2c3639 backend/drm: retry without modifiers for the primary plane
On some Intel cards using modifiers can fill the FIFO and prevent
hotplugged outputs from being properly enabled.

Add a fallback without modifiers.

Fixes: 2bdd1d0896 ("backend/drm: use modifiers for our GBM buffers")
References: https://github.com/swaywm/wlroots/issues/1840
Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-23 09:36:50 +00:00
Simon Ser fd25e2ca11 backend/drm: track gbm_bo during direct scan-out
We need to destroy the gbm_bo we imported and drmModeRmFb.

Closes: https://github.com/swaywm/sway/issues/4662
2019-10-22 21:50:31 +00:00
Simon Ser 5bddb5a909 backend/wayland: add support for direct scan-out
Closes: https://github.com/swaywm/wlroots/issues/1830
2019-10-16 09:40:26 -04:00
Simon Ser 2bdd1d0896 backend/drm: use modifiers for our GBM buffers 2019-10-11 08:11:48 -04:00
Ivan Molodetskikh 5f78ea20fa drm: use IMPORT_FD for INVALID modifier
GBM_BO_IMPORT_FD_MODIFIER doesn't accept the INVALID modifier.
2019-09-26 23:26:40 +03:00
Markus Ongyerth ebeef0fbe8 Clean up wayland backend tablet support
Mostly address feedback from emersion on PR #1694
Remove const qualifier from char *name, to allow free() call
2019-09-26 19:41:19 +03:00
Markus Ongyerth 2285e36b0c Add zwp-tablet-unstable-v2 client support
This allows wlroots based compositors to properly use graphic tablets
with the wayland backend.
This should be a decent quality of life improvement when working on
tablet related features.
2019-09-26 19:41:19 +03:00
Markus Ongyerth 57babd2e13 Move initialization of wlr_tablet_pad into types/wlr_tablet_pad 2019-09-26 19:41:19 +03:00
Rouven Czerwinski bf90474b74 backend/drm: check for mst: in path property
Instead of checking that the path property is not 0 to determine if the
connector is an MST connector, check if the path contains the mst:
string.

Fixes #1813
2019-09-05 10:25:12 +03:00
Andri Yngvason e19f48d1e4 backend: touch: Fixup incomplete patch for single touch devices.
All instances of libinput_event_touch_get_slot need to be converted to
libinput_event_touch_get_seat_slot for things to work.
2019-08-19 17:35:30 +03:00
Andri Yngvason 4f4d3cf2a2 backend: touch: Assign good ids to single touch devices
libinput_event_touch_get_slot always returns -1 for single touch devices. Using
libinput_event_touch_get_seat_slot instead ensures that they are assigned actual
slot ids.

Also, this is what Weston does, so this change yields a more consistent
behaviour between different compositors.
2019-08-15 18:46:54 +03:00
Simon Ser 8d2ea9544b backend/drm: fix missing plane formats
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-15 12:33:42 +12:00
Antonin Décimo e7f1aa30dd backend/wayland: check if zxdg_toplevel_decoration_v1 is not NULL 2019-08-12 09:37:21 +09:00
Antonin Décimo 39c5d93dea backend/drm: use UINT64_C for uint64_t literals
Prevents an integer promotion bug during the byte-shift.
2019-08-12 09:37:21 +09:00
Antonin Décimo 68b4a5305e backend/session: non-void function should return a value
With assertions disabled, it should make sense to return NULL.
2019-08-12 09:37:21 +09:00
Drew DeVault 94f65e354d Add libinput-1.14 support
This libinput version adds a new tablet tool type.
2019-08-11 19:39:47 +09:00
Rouven Czerwinski 01f903874b Revert "output: atomic mode"
This reverts commit ee5f98ad49.

This intoduced problems where outputs could not be turned off because
they had flips pending.
2019-08-07 16:22:11 +09:00
Rouven Czerwinski 4d36cc86eb backend/drm: destroy output immediately
Instead of waiting for the next pageflip, destroy the output immediately
since we can now handle flips for outputs which no longer exist.
Also demote the missing crtc on flip to debug.

Fixes #1739
2019-08-03 15:44:21 +02:00
Simon Ser ee5f98ad49 output: atomic mode, enabled, scale and transform
This commit makes more output properties (mode, enabled, scale and transform)
atomic. This means that they are double-buffered and only applied on commit.

Compositors now need to call wlr_output_commit after setting any of those
properties.

Internally, backends still apply properties sequentially. The behaviour should
be exactly the same as before. Future commits will update some backends to take
advantage of the atomic interface. Some backends are non-atomic by design, e.g.
the X11 backend or the legacy DRM backend.

Updates: https://github.com/swaywm/wlroots/issues/1640
2019-08-02 10:01:29 -04:00
Simon Ser ca45f4490c Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
2019-07-27 15:49:32 -04:00
Sebastian Krzyszkowiak 415267ac13 backends/x11: Touch support
Closes #1749
2019-07-17 09:23:10 -04:00
Rouven Czerwinski d10072e76c backend: drm: switch to pageflip_handler_2
atomic and legacy now both pass the backend as the user data for the
pageflip event. We than retrieve the correct connector by matching on
the crtc_id passed to the page_flip_handler2.

Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now.

Fixes #1297
2019-06-27 00:17:27 +00:00
Scott Anderson 46dc4100d6 backend/drm: Exit-early if 0 crtcs
This fixes an assertion failure if we're using a device that has 0 crtcs
as a renderer.
This would happen on some laptops with discrete GPUs.
2019-06-24 09:09:36 +03:00
Scott Anderson b3f42548d0 backend/drm: Simplify object matching code
We originally used match_obj on planes, but this was largely
unnecessary. Instead, this assigns planes statically at startup.
2019-06-22 11:58:33 +03:00
Greg V d80acadfd8 Support pointer-gestures on Wayland backend 2019-06-21 14:43:28 -04:00
Dorota Czaplejewicz 5027b23dc2 x11: Send a frame event on the pointer after button events
Without the immediate frame event, the button event would not be processed in time: https://source.puri.sm/Librem5/phoc/issues/
2019-06-17 16:01:29 +03:00
Simon Ser ce3f4c3fe1 output: remove wlr_output_impl.transform
The backend doesn't need to handle transform changes, since everything is done
in software. In fact, all of the implementations were all identical and just
set the transform.

We could add support for hardware transforms, but:

- This would require a different field (something like hardware_transform)
- Not all combinations are possible because there often are hardware
  limitations
- The Wayland protocol isn't ready for this (in particular xdg-output, see [1])

This belongs to a different patch series anyway.

[1]: https://patchwork.freedesktop.org/series/52324/
2019-06-16 10:51:49 -04:00
Scott Anderson b85f0cbff9 Remove WLR_DRM_NO_ATOMIC_GAMMA workaround
This is fixed on amdgpu, so we don't need this anymore.
2019-06-11 08:52:34 +03:00
Simon Ser d201fc3506 backend/drm: add support for multiplanar BOs 2019-06-07 09:06:11 -04:00
Simon Ser e8057bb60c backend/drm: fallback to drmModeAddFB2 2019-06-07 09:06:11 -04:00
Simon Ser d1766547bd backend/drm: reject DMA-BUFs with flags 2019-06-07 09:06:11 -04:00
Simon Ser 44ba603c0e backend/drm: hold buffers while scanning out 2019-06-07 09:06:11 -04:00
Simon Ser afe7b207d5 output: fix attach_buffer semantics 2019-06-07 09:06:11 -04:00
Simon Ser 1d222309b8 output: change set_dmabuf to attach_buffer 2019-06-07 09:06:11 -04:00
Simon Ser 5c78f1b0d5 backend/drm: strip alpha channel on scan-out 2019-06-07 09:06:11 -04:00
Simon Ser e516ea4c79 backend/drm: check format when scanning out DMA-BUF 2019-06-07 09:06:11 -04:00
emersion 96d6fde5dc backend/drm: add basic support for direct scan-out 2019-06-07 09:06:11 -04:00
Rouven Czerwinski 96e9c0f9c8 drm: legacy: issue a NULL modeset on disable
The DRM subsystem needs a NULL modeset for connectors which disappear
from the system to disable the hardware pipes, otherwise the pixels get
rendered but are sent nowhere.

The atomic backend does the equivalent by removing the properties and
issuing a commit.

Fixes #1706
2019-06-02 09:50:40 +02:00
Jan Chren 151b7d1d94 session/logind: check for XDG_SESSION_ID first
In order to support compositors running as systemd user units without display manager,
a mechanism for specifying session ID exactly must exist.

Checking for `XDG_SESSION_ID` mimics loginctl behaviour e95be7def2/src/login/loginctl.c (L856).
2019-05-22 15:43:07 +02:00
Jan Chren e04e1ba197
session/logind: specify seat exactly
"/org/freedesktop/login1/seat/self" path triggers seat-finding code path in logind,
which currently relies on getting the session based on caller's PID.
This behaviour is deprecated in logind as it doesn't work eg. with systemd user units,
which run outside of user session.

We check for "seat0" in logind_change_vt() already as introduced in 47985d2dc5,
so hard-coding it here is not a problem, otherwise sd_session_get_seat() could be used.
2019-05-22 14:43:13 +02:00
Scott Anderson 522ddd93f1
Merge pull request #1696 from RedSoxFan/logind-stay-active-on-gone
session/logind: keep active for pause_device gone
2019-05-15 04:34:08 +00:00
Michiel a68c7c0c8d Fixes #1689 RDP RemoteFX crash
When using the rdp backend and connecting with xfreerdp ... --rfx, wlroots
crashes in backend/rdp/output.c while attempting to realloc(..., 0).

This commit guards against that and instead returns true, resulting in
no rfx message being sent. This prevents the crash and appears to work, but
it's not obvious if this is correct from a specification perspective.
2019-05-13 23:30:38 +03:00
Brian Ashworth 90c284bded session/logind: keep active for pause_device gone
This appears to be a quick fix for compositors freezing when a dock is
disconnected. Disconnection of the dock is causing `pause_device` for
the DRM devices associated with the dock. Since these devices major
number is `DRM_MAJOR`, the session was being set to inactive. This just
makes it so the session is not set to inactive when the device's state
is `gone`.
2019-05-13 10:43:35 -04:00
Simon Ser 947d5ff481 backend/wayland: remove wl_shm
We bind to it but never use it.
2019-05-06 20:51:57 +03:00
Simon Ser 292d20e4c1 backend/wayland: use xdg-decoration-unstable-v1
This allows the toplevel to have proper decorations on compositors that support
xdg-decoration-unstable-v1.
2019-05-06 10:34:41 -06:00
Simon Ser 937e0e7937 backend/noop: disallow rendering
Closes: https://github.com/swaywm/wlroots/issues/1662
2019-04-29 10:48:51 -06:00
Simon Ser 933208837d backend/wayland: fix wlr_wl_pointer use-after-free 2019-04-23 14:36:12 -06:00
Simon Ser 20690346c7 output: rename needs_commit to needs_frame
This new name makes more sense, since it is a request from the backend to get
a new frame. In the future a commit may not convey a new frame.
2019-04-23 14:34:30 -06:00
Simon Ser 9a0f8a194c output: refactor backend API
This updates the backend part of the output API. This is mostly renaming:
make_current becomes attach_render and swap_buffers becomes commit.

This also fixes the RDP backend to support NULL damage.
2019-04-23 14:34:30 -06:00
Alyssa Ross 95b22619e0 Fix missing headers when building without X11
The deleted includes are redundant, because other headers will include
the necessary files. Additionally, they cause build failures, because
including EGL/egl.h or EGL/eglext.h directly, instead of through
wlr/render/egl.h or wlr/render/interface.h, will mean that
MESA_EGL_NO_X11_HEADERS will not have been defined, and so the EGL
headers will attempt to pull in unnecessary X11 headers that may not
exist on the system.

For the headers produced by glgen.sh, the includes couldn't simply be
deleted, because no other header would include the EGL headers. Neither
wlr/render/egl.h or wlr/render/interface.h felt appropriate to include,
so I opted instead to copy the MESA_EGL_NO_X11_HEADERS definition before
the EGL includes.
2019-04-22 00:04:08 +03:00
Jan Beich b6d0de177a backend: unbreak on 32-bit architectures
backend/headless/output.c:132:3: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
                ++backend->last_output_num);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~
backend/noop/output.c:72:3: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
                ++backend->last_output_num);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~
backend/wayland/output.c:294:3: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
                ++backend->last_output_num);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~
backend/x11/output.c:150:3: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
                ++x11->last_output_num);
                ^~~~~~~~~~~~~~~~~~~~~~
2019-04-08 14:03:15 -06:00
Ilia Bozhinov 670c787fa7 noop: implement setting a custom mode 2019-04-08 08:14:10 -06:00
Drew DeVault fd0d7d0907 Add FreeRDP backend for remote desktop support 2019-04-08 08:09:07 -06:00
Guido Günther cd60f40bbb wlr_output: Add preferred property (#1625)
* wlr_output: Indicate modes link

* wlr_output: Introduce preferred flag

This indicates an outputs preferred mode.

* drm: Set preferred flag for an outputs preferred mode
2019-03-21 22:12:43 +02:00
Ryan Walklin 4453757fc9 s/lid_switch/switch_device
Rename lid_switch to switch_device to disambiguate lid and tablet mode switches.
2019-03-19 22:45:58 -04:00
Brian Ashworth 6b7f5e4010 backend/noop: improve output number handling
This improves the way the output numbers are handled for the noop
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
NOOP-2, which causes an issue since the identifier will also be
identical. With this, the last output is NOOP-3 and the outputs can be
distinguished.
2019-03-15 18:38:12 +02:00
Brian Ashworth c97f0eb0f2 backend/headless: improve output number handling
This improves the way the output numbers are handled for the headless
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
HEADLESS-2, which causes an issue since the identifier will also be
identical. With this, the last output is HEADLESS-3 and the outputs can
be distinguished.
2019-03-15 18:37:56 +02:00
Brian Ashworth b135599e5a backend/x11: improve output number handling
This improves the way the output numbers are handled for the x11
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
X11-2, which causes an issue since the identifier will also be
identical. With this, the last output is X11-3 and the outputs can be
distinguished.
2019-03-15 18:37:35 +02:00
Brian Ashworth 67523fb228 backend/wayland: improve output number handling
This improves the way the output numbers are handled for the wayland
backend. Instead of using the number of active outputs plus one, the
last used number is stored and new outputs will increment it. This
fixes the situation where you start with one output, create a second,
close the first, and create a third. Without this, both outputs will be
`WL-2`, which causes an issue since the identifier will also be
identical. With this, the last output is `WL-3` and the outputs can be
distinguished.
2019-03-15 09:43:40 +02:00
Niklas Schulze 2baad6eba6 backend/session: Allow setting a custom tty via WLR_DIRECT_TTY 2019-03-06 13:20:51 +01:00
Scott Anderson 6a8f17b5f6 backend/drm: Don't fail on failing to find overlay format
Some hardware exists which doesn't support XRGB/ARGB overlays, and we
aren't even using overlay planes, so don't fail on trying to find a
format.
2019-03-05 23:15:20 +01:00
emersion d02548d87a
backend/session: open TTY with O_CLOEXEC for direct session 2019-03-05 19:19:13 +01:00
emersion 8efeca528f backend/session: add noop session
This is the first step towards being able to run via DRM leasing and on render
nodes.

Test with:

    export WLR_BACKENDS=drm
    export WLR_SESSION=noop
    export WLR_DRM_DEVICES=/dev/dri/renderD128
2019-03-02 08:40:27 -07:00
emersion 5445d8aad0 meson: enable more compiler warnings 2019-03-01 09:20:23 +01:00
Scott Anderson d945c97926 backend/drm: Unset cursor on cleanup
This will prevent the cursor from persisting on the Linux framebuffer
terminal on exit.
2019-02-24 09:04:36 +01:00
Rouven Czerwinski e1834ace28 backend/drm: fix memory leak in realloc crtcs
If *changed_outputs is not supplied by the calling function, track the local
allocation with a bool variable and free the allocation at the end of the
function.
2019-02-21 08:19:12 +01:00
Brian Ashworth 50011e7170 backend/drm: fix modeset on drm fd resume
On DRM resume, such as switching back to a TTY, the output needs to be
modeset to the current mode. However, wlr_output_set_mode will return
early when attempting to set the mode to the current mode. This just
steps around wlr_output_set_mode and calls drm_connector_set_mode
directly.
2019-02-19 16:49:51 +01:00
emersion 2a738803b2
backend/drm: fix NULL dereference when unsetting cursor
This segfault happens on multi-GPU systems.

Fixes https://github.com/swaywm/sway/issues/3717
2019-02-18 20:15:39 +01:00
Drew DeVault 2d2c79e37c
Merge pull request #1537 from VincentVanlaer/cursor-dmabuf-nouveau
Add workaround for hardware cursors on nouveau
2019-02-15 16:07:50 +01:00
Vincent Vanlaer 26a9fa8148 Add workaround for hardware cursors on nouveau 2019-02-15 15:59:09 +01:00
Drew DeVault 9a5d59a839 Revert "drm: do not modeset to current mode"
This reverts commit 72c76b128e.
2019-02-15 09:44:42 -05:00
Vincent Vanlaer bc048b22fb Copy cursor surface to secondary gpu if necessary 2019-02-14 12:31:54 +01:00
Brian Ashworth 72c76b128e drm: do not modeset to current mode
There is no point in modesetting an output to a mode that it is already
set to. Modesetting will cause the output to briefly flicker which is
undesirable for a noop. This returns early in `drm_connector_set_mode`
when attempting to modeset to the current mode.
2019-02-14 10:59:06 +01:00
Scott Anderson b2f56ad4a8
Merge pull request #1526 from VincentVanlaer/cursor-dmabuf
Allow cursor render surface to be used as fb
2019-02-04 21:34:40 +00:00
Vincent Vanlaer 7bc43413ed Allow cursor render surface to be used as fb
In order for a surface to be used as a cursor plane framebuffer, it
appears that requiring the buffer to be linear is sufficient.

GBM_BO_USE_SCANOUT is added in case GBM_BO_USE_LINEAR isn't sufficient
on untested hardware.

Fixes #1323

Removed wlr_drm_plane.cursor_bo as it does not serve any purpose
anymore.

Relevant analysis (taken from the PR description):

While trying to implement a fix for #1323, I found that when exporting
the rendered surface into a DMA-BUF and reimporting it with
`GBM_BO_USE_CURSOR`, the resulting object does not appear to be valid.
After some digging (turning on drm-kms debugging and switching to legacy
mode), I managed to extract the following error: ```
[drm:__setplane_check.isra.1 [drm]] Invalid pixel format AR24
little-endian (0x34325241), modifier 0x100000000000001 ``` The format
itself refers to ARGB8888 which is the same format as
`renderer->gbm_format` used in master to create the cursor bo. However,
using `gbm_bo_create` with `GBM_BO_USE_CURSOR` results in a modifier of
0. A modifier of zero represents a linear buffer while the modifier of
the surface that is rendered to is  `I915_FORMAT_MOD_X_TILED` (see
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/include/uapi/drm/drm_fourcc.h?h=v4.20.6#n263).
In order to fix this mismatch in modifier, I added the
`GBM_BO_USE_LINEAR` to the render surface and everything started to work
just fine. I wondered however, whether the export and import is really
necessary. I then decided to test if the back buffer of the render
surface works as well, and at least on my hardware (Intel HD 530 and
Intel UHD 620) it does. This is the patch in this PR and this requires
no exporting and importing.

I have to note that I cheated in order to import DMA_BUFs into a cursor
bo when doing the first tests, since on import the Intel drivers check
that the cursor is 64x64. This is strange since cursor sizes other than
64x64 have been around for quite some time now
(https://lists.freedesktop.org/archives/mesa-commit/2014-June/050268.html).
Removing this check made everything work fine. I later (while writing
this PR) found out that `__DRI_IMAGE_USE_CURSOR` (to which
`GBM_BO_USE_CURSOR` translates) has been deprecated in mesa
(https://gitlab.freedesktop.org/mesa/mesa/blob/master/include/GL/internal/dri_interface.h#L1296),
which makes me wonder what the usecase of `GBM_BO_USE_CURSOR` is. The
reason we never encountered this is that when specifying
`GBM_BO_USE_WRITE`, a dumb buffer is created trough DRM and the usage
flag never reaches the Intel driver directly. The relevant code is in
https://gitlab.freedesktop.org/mesa/mesa/blob/master/src/gbm/backends/dri/gbm_dri.c#L1011-1089
. From this it seems that as long as the size, format and modifiers are
right, any surface can be used as a cursor.
2019-02-04 20:47:07 +01:00
mnussbaum c138da233b Allow compositors to run as systemd user units
When a wlroots compositor runs as a systemd user unit there is no
session associated with the compositor process. Instead we need to
attach to an active and graphical user session.

This change first looks for an available session for the process, and if
there isn't one falls back to display in the oldest available graphical
session.

This work was modeled after a similar change to mutter -
https://gitlab.gnome.org/GNOME/mutter/merge_requests/150.
2019-02-03 18:45:32 -08:00
emersion 22faddde9e
backend/session/logind: dup FD with CLOEXEC 2019-01-31 16:11:45 +01:00
emersion 75371d2c88
Require libdrm >= 2.4.95 2019-01-29 19:33:38 +01:00
Drew DeVault feb1b9b1cb
Merge pull request #1509 from emersion/gbm-fmt-mismatch
backend/drm: fix GBM format mismatch
2019-01-29 10:39:54 -05:00
emersion ee293fab58
backend/drm: fix GBM format mismatch
We create the EGL config with GBM_FORMAT_ARGB8888, but then initialize GBM BOs
with GBM_FORMAT_XRGB8888. This mismatch confuses Mesa.

Instead, we can always use GBM_FORMAT_ARGB8888, and use DRM_FORMAT_XRGB8888
when calling drmModeAddFB2.

Fixes https://github.com/swaywm/wlroots/issues/1438
2019-01-29 12:04:12 +01:00
Greg V 9fe8e37961 Implement the pointer-gestures-unstable-v1 protocol
This protocol relays touchpad gesture events produced by libinput to
supporting clients (e.g. Evince, Eye of GNOME).
2019-01-28 22:06:36 +01:00
emersion b45fc24b18
backend/wayland: handle wl_pointer.axis_stop 2019-01-26 11:18:47 +01:00
emersion 5de26ad8ed
pointer: add a frame event
Frame events group logically connected pointer events. It makes sense to make
the backend responsible for sending frame events, since once the events are
split (ie. once the frame events are stripped) it's not easy to figure out
which events belongs to which frame again.

This is also how Weston handles frame events.

Fixes https://github.com/swaywm/wlroots/issues/1468
2019-01-26 11:04:05 +01:00
Jente Hidskes 85d84a1a04
backend/x11 & backend/wayland: make set_title NULL-safe
Set the default "wlroots - " title when the title argument to the
set_title functions is NULL. Otherwise, for at least the Wayland
backend, we'd crash because xdg_toplevel_set_title doesn't handle a NULL
pointer.
2019-01-24 15:18:28 +01:00
Brian Ashworth 88ee102992 backend/wayland: fix resizing
Before resizing the egl window, the buffers must be swapped
2019-01-22 21:19:34 +01:00
Jente Hidskes edf0e49195
Add wlr_x11_output_set_title 2019-01-20 16:21:04 +01:00
emersion d4ffa5b7a6
backend/drm: fix state for outputs loosing their CRTC
When there aren't enough CRTCs for all outputs, we try to move a CRTC from a
disabled output to an enabled one. When this happens, the old output's state
wasn't changed, so the compositor thought it was still enabled and rendering.

This commit marks the old output as WLR_DRM_CONN_NEEDS_MODESET and sets its
current mode to NULL.
2019-01-19 10:18:03 +01:00
Ryan Dwyer 9b4be5a595 Introduce noop backend
The noop backend is similar to headless, but it doesn't contain a
renderer. It can be used as a place to stash views for when there's no
physical outputs connected.
2019-01-17 20:13:55 +10:00
Drew DeVault d3d1437bc4 Add wlr_wl_output_set_title 2019-01-10 21:53:32 -05:00
Drew DeVault 97af2464b7 Update Wayland backend to xdg-shell stable 2019-01-10 09:17:14 -05:00
Jan Beich f80d174e8b Simplify evdev includes on FreeBSD by relying on up-to-date package
As evdev-proto is installed by CI some files have been missed:

 ../examples/pointer-constraints.c:2:10: fatal error: 'linux/input-event-codes.h' file not found
 #include <linux/input-event-codes.h>
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
 ../examples/relative-pointer-unstable-v1.c:5:10: fatal error: 'linux/input-event-codes.h' file not found
 #include <linux/input-event-codes.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-01-07 08:08:47 +00:00
emersion 610f5bfc77
Merge pull request #1432 from ForTheReallys/relative-pointers
Relative pointers
2019-01-04 13:42:53 +01:00
emersion 9b1d9fb91e
backend/drm: get physical size from libdrm
Values from libdrm are likely more reliable than raw values from the EDID. We
were already using values from libdrm, but they were overwritten by parse_edid.
See drm.c:

    wlr_conn->output.phys_width = drm_conn->mmWidth;
    wlr_conn->output.phys_height = drm_conn->mmHeight;
2018-12-23 10:36:53 +01:00
Timidger 9af0c5338f
Standardize the wlr_box input paramaters
Fixes #1094
2018-12-21 13:56:10 -05:00
Alex Maese e276d310e8 Add unaccelerated pointer values to wlr_event_pointer_motion events 2018-12-21 12:20:48 -06:00
emersion ff6c4f80b2
backend/drm: don't insert duplicate custom modes, fix refresh rate 2018-12-16 11:06:46 +01:00
Ryan Walklin 2a3c62b4d2 [WIP][DONTMERGE]Add support for libinput_switch input devices
These are used primarily by laptops to signal
the state of the lid (open/closed) and tablet
mode if supported, based on ACPI events.
2018-12-15 14:42:35 +11:00
Scott Anderson fec88770dd backend/drm: Fix uninitialized variable 2018-12-09 22:55:53 +13:00
Scott Anderson efdd4d6ea2 backend/drm: Improve encoder logic
This fixes an issue that can occur with DP MST connectors not reporting
any encoders.
2018-12-09 22:48:00 +13:00
emersion f8056a0350
backend/drm: fix disappeared output indices
This commit changes `scan_drm_connectors` to add new outputs to the end of the
list. That way, it's easier to understand what's going on with indices.

When we need to destroy outputs, we now walk the list in reverse order. This
ensures indices remain correct while iterating and removing items from the
list.

We now also make outputs without a CRTC disappear (those are in
WLR_DRM_CONN_NEEDS_MODESET state).
2018-12-09 10:12:52 +01:00
Drew DeVault 20f5fc9e2e
Merge pull request #1413 from emersion/logind-session-logs
backend/session/logind: improve logging
2018-12-06 18:03:33 -05:00
emersion e23fe328a6
backend/session/logind: improve logging 2018-12-06 17:01:17 +01:00
emersion 491f1dbf75
backend/drm: fix VLA overflow 2018-12-04 18:56:29 +01:00
emersion 408e2a77e9
backend/wayland: fix zero-length VLA 2018-11-27 23:18:12 +01:00
Rostislav Pehlivanov 91513c89cd Fix interlaced mode rejection 2018-11-22 17:52:52 +00:00
Rostislav Pehlivanov dc9fdd6385 Skip interlaced modes during drm mode detection
Fixes #3167
A better solution could be made if there's a need to.
2018-11-21 19:23:48 +00:00
Scott Anderson d3ee69f76b backend/x11: Hide cursor with Xfixes 2018-11-13 10:55:03 +13:00
Scott Anderson 70ae76304e backend/x11: Remove old input functions
This also allows us to remove xcb-xkb, since Xinput will now give us the
appropriate XKB modifiers with each event.
2018-11-13 10:55:03 +13:00
Scott Anderson d89e868cc9 backend/x11: Add new Xinput events 2018-11-13 10:42:02 +13:00
Scott Anderson 88b2d6fe25 backend/x11: Check for xinput extension 2018-11-13 10:41:37 +13:00
Scott Anderson 9c1b87f210 backend/x11: Move atom initilisation earlier
There isn't any real reason to delay this until the backend is started.
2018-11-13 10:40:52 +13:00
Scott Anderson ab2c57984b backend/x11: Make header order consistent 2018-11-13 10:40:52 +13:00
Scott Anderson 51a283cbe4 backend/x11: Rename xcb_conn to xcb
When the Xlib connection is removed, this _conn suffix is going to be
pointless. I'm removing this preemtively for that.
2018-11-13 10:39:24 +13:00
Drew DeVault 77dfac4fa4
Merge pull request #1372 from emersion/config10
Use #if instead of #ifdef for wlroots config data
2018-11-12 16:14:18 -05:00
emersion 51bfdd620e
Use #if instead of #ifdef for wlroots config data
This prevents some annoying issues when e.g. not including wlr/config.h or
making a typo in the guard name.
2018-11-12 10:12:46 +01:00
emersion 180151ed09
backend/wayland: handle WL_EVENT_WRITABLE for Wayland socket
We need to flush when the connection is writable again. This is important in
case the write buffer becomes full. This is also what Weston does [1].

[1]: https://gitlab.freedesktop.org/wayland/weston/blob/master/libweston/compositor-wayland.c#L2593
2018-11-11 21:14:15 +01:00
Scott Anderson aaff4b8c00 backend/wayland: Make header order consistent 2018-11-11 22:29:35 +13:00
Scott Anderson bbce92a923 backend/wayland: Move initilisation code earlier
The renderer redesign is going to need the render fd before the backend
is fully started, so we have to move the wl registry code to when the
backend is created instead of when it is started.

We also need to stash the wl_keyboard and emit it to library users
later, once they've added their listeners and started the backend.
2018-11-11 18:11:56 +13:00
Scott Anderson 47545cf550 backend/wayland: Use specific wl_global versions
Explicitly use the version we support instead of accepting the
compositor's version.
2018-11-11 18:11:56 +13:00
Scott Anderson 4e03802057 backend/wayland: Move registry into backend
Registry was a very small file, and is heavily related to the backend,
so there is not point in keeping them separate.
2018-11-11 18:11:56 +13:00
emersion 09550032b7
render: correctly set EGL_RENDERABLE_TYPE
This should be set to EGL_OPENGL_ES2_BIT.

Also fixes EGL config attributes in the headless and X11 backends.
2018-11-10 13:20:54 +01:00
emersion b5125ff328
backend/drm: specify minimum config attributes
Since the format used by DRM is GBM_FORMAT_ARGB8888, we need at least a R, G, B
and A channel.
2018-11-04 09:00:55 +01:00
Drew DeVault 70ca7daeb2
Merge pull request #1346 from emersion/fix-schedule-frame-mgpu
backend/drm: fix frame scheduling on secondary GPUs
2018-10-30 01:59:25 +01:00
emersion 68362b37a8
backend/drm: fix frame scheduling on secondary GPUs
There was a missing copy_drm_surface_mgpu call in drm_connector_schedule_frame
so we asked for a pageflip with an unknown BO, resulting in ENOENT.

Additionally, this commit makes schedule_frame return a bool indicating
failures. This allows schedule_frame_handle_idle_timer to only set
frame_pending to true if a frame has been successfully scheduled. Thus, if a
pageflip fails, rendering won't be blocked forever anymore.

In case a pageflip is already pending, true is returned because a frame has
already been scheduled and will be sent sometime soon.
2018-10-29 20:38:57 +01:00
emersion 443a38bd3f
backend/drm: add WLR_DRM_NO_ATOMIC_GAMMA env variable
This allows the legacy interface to be used instead of atomic if needed. This
is a workaround to make some Intel GPUs work (if this variable is unset) as
well as to make some AMD GPUs work (if this variable is set).
2018-10-28 23:43:21 +01:00
Drew DeVault e0cf97da69
Merge pull request #1307 from emersion/static-analysis
Fix a few bugs found by the static analyzer
2018-10-21 19:18:39 +02:00
sghctoma fa587b8ea9 Increase _POSIX_C_SOURCE to 200112L
CLOCK_MONOTONIC appeared in IEEE Std. 1003.1-200x, it was not part of
POSIX.1b (the 1993 version), and FreeBSD treats it accordingly.
2018-10-17 08:33:19 +02:00
emersion f9eb5df80e backend: fix use-after-free in wlr_backend_autocreate
Found by clang static analyzer.
2018-10-13 10:58:59 +02:00
emersion b66041a9e5 backend/drm: don't reset conn->pageflip_pending in drm_connector_cleanup
If a pageflip is pending before cleanup, it's still pending after. This
is used line 1177: drm_connector_cleanup is called and
conn->pageflip_pending is checked afterwards.

Fixes #1297
2018-10-09 14:54:33 +02:00
Drew DeVault 8488ed2997
Merge pull request #1298 from emersion/output-dangling-idle-frame
output: remove idle_frame event source when destroying output
2018-10-09 13:41:04 +02:00
Rouven Czerwinski 77478ac302 backend/drm: set drmEventContext version to 2
As per [1] set drmEventContext version to 2, since wlroots does not use the
page_flip_handler2.

[1]: https://s-opensource.org/2017/04/12/libdrm-event-handling-youre-probably-wrong/
2018-10-09 12:34:01 +02:00
emersion 46b1ba386f output: remove idle_frame event source when destroying output
This prevents the idle event to be activated on a destroyed
output.

This also makes the backend responsible for free-ing modes, as it
is the one allocating them and adding them to the list. Note that
the DRM backend (the only one using modes) already frees them.
2018-10-09 10:55:03 +02:00
Scott Anderson 885586a831
Merge pull request #1280 from emersion/drm-link-status
backend/drm: add support for the link-status property
2018-10-08 21:01:30 +02:00
emersion 37de179013 backend/drm: fix zero-length VLAs 2018-10-07 13:04:52 +02:00
emersion 776008da69 backend/drm: properly handle GPUs without CRTCs 2018-10-07 12:59:00 +02:00
emersion ba91422747 output: don't trigger a frame immediately in schedule_frame
This desynchronizes our rendering loop with the vblank cycle.

In case a compositor doesn't swap buffers but schedules a frame,
emitting a frame event immediately enters a busy-loop.

Instead, ask the backend to send a frame when appropriate. On
Wayland we can just register a frame callback on our surface. On
DRM we can do a no-op pageflip.

Fixes #617
Fixes swaywm/sway#2748
2018-10-05 16:18:37 +02:00
emersion eac7c2ad2f output: add presentation refresh prediction 2018-10-04 22:00:24 +02:00
emersion b0635bf3e7 Rename get_present_clock to get_presentation clock, use it 2018-10-04 22:00:22 +02:00
emersion 54e1287f30 backend: add get_present_clock 2018-10-04 21:58:17 +02:00
emersion 26b9d6dbb1 output: send present event from all backends 2018-10-04 21:56:38 +02:00
emersion 78389fe722 output: add present event 2018-10-04 21:56:38 +02:00
emersion f5a147b739 backend/drm: add support for the link-status property 2018-10-04 21:54:27 +02:00
Drew DeVault 841d04db99
Merge pull request #1262 from nyorain/session_fix
Improve session handling
2018-10-04 17:36:39 +02:00
nyorain b4d46aa9c2 Use sd_bus_get_property_trivial & remove numbering 2018-10-04 14:04:06 +02:00
emersion 7ab37bf152 backend/drm: update EDID manufacturers database 2018-10-04 10:58:45 +02:00
emersion e88db9a3fb backend/drm: reset gamma table on VT switch 2018-10-03 10:53:35 +02:00
emersion 2beb68007e output: make gamma size a size_t and gamma table const 2018-10-03 10:36:33 +02:00
emersion 79dd9ba151 backend/drm: don't free connector immediately
When a pageflip is pending, we'll get a DRM event for the connector
in the future. We don't want to free the connector immediately
otherwise we'll use-after-free in the pageflip handler.

This commit adds a new state, "DISAPPEARED". This asks the pageflip
handler to destroy the output after it's done pageflipping.
2018-09-28 10:00:40 +02:00
nyorain 7b52388424 Rework session handling
Sessions can now be retrieved from a backend in a more general manner.
Multi-backend gets back its `session` field that contains the session
if one was created, removing the interfacing from multi backend with the
drm backend directly. This adds the possibility to use sessions even
without the drm backend.

It additionally fixes the bug that 2 session objects got created when
WLR_BACKENDS were set to "libinput,drm".

To allow vt switching without drm backend (and drm fd) on logind, start
listening to PropertiesChanged signals from dbus and parse the session
"Active" property when no master fd was created (this does not change
current drm backend behaviour in any way).
2018-09-24 23:35:09 +02:00
sghctoma 9383e1f76c Apply multiseat fixes to FreeBSD direct backend
This commit applies the multiseat fixes that are part of PR #1063 (
commits 964e0a50 and 47895d2) to the FreeBSD direct backend.
2018-09-21 15:02:32 +02:00
Ryan Dwyer 691a63d66b Introduce wlr_multi_for_each_backend 2018-09-19 21:53:51 +10:00
emersion 139a905924 backend/drm: add assertions 2018-09-18 11:06:01 +02:00
emersion 02231554c8 backend/x11: add assertions 2018-09-18 11:06:01 +02:00
emersion e98cb7c5ab backend/wayland: add assertions 2018-09-18 11:06:01 +02:00
emersion 07ea98dab9 backend/session: add assertions 2018-09-18 11:06:01 +02:00
emersion 6c05f17a25 backend/multi: add assertions 2018-09-18 11:06:01 +02:00
emersion 7bcf0d9599 backend/libinput: add assertions 2018-09-18 11:05:55 +02:00
emersion bc34486c04 backend/headless: add assertions 2018-09-18 11:01:53 +02:00
random human 572dfcdba7
Add support for WLR_SESSION env variable
Valid values are "logind"/"systemd" and "direct". If WLR_SESSION is set,
only its value is potentially tried; it will not try any other option.
2018-09-18 05:06:32 +05:30
emersion f8a50e4fe7 backend/drm: steal CRTCs from disabled outputs
This commit allows outputs that need a CRTC to steal it from
user-disabled outputs. Note that in the case there are enough
CRTCs, disabled outputs don't loose it (so there's no modeset
and plane initialization needed after DPMS). CRTC allocation
still prefers to keep the old configuration, even if that means
allocating an extra CRTC to a disabled output.

CRTC reallocation now happen when enabling/disabling an output as
well as when trying to modeset. When enabling an output without a
CRTC, we realloc to try to steal a CRTC from a disabled output
(that doesn't really need the CRTC). When disabling an output, we
try to give our CRTC to an output that needs one. Modesetting is
similar to enabling.

A new DRM connector field has been added: `desired_enabled`.
Outputs without CRTCs get automatically disabled. This field keeps
track of the state desired by the user, allowing to automatically
re-enable outputs when a CRTC becomes free.

This required some changes to the allocation algorithm. Previously,
the algorithm tried to keep the previous configuration even if a
new configuration with a better score was possible (it only changed
configuration when the old one didn't work anymore). This is now
changed and the old configuration (still preferred) is only
retained without considering new possibilities when it's perfect
(all outputs have CRTCs).

User-disabled outputs now have `possible_crtcs` set to 0, meaning
they can only retain a previous CRTC (not acquire a new one). The
allocation algorithm has been updated to do not bump the score
when assigning a CRTC to a disabled output.
2018-09-15 08:37:33 +02:00
emersion cb293f09e7 output: make wlr_output_enable return a bool 2018-09-14 18:18:07 +02:00
Drew DeVault ca331c0468
Merge pull request #1235 from emersion/dealloc-unused-crtcs
backend/drm: de-allocate unused CRTCs
2018-09-10 21:51:36 -04:00
Drew DeVault 7ba50469e0
Merge pull request #1205 from sghctoma/fix-freebsd-direct-session
Add drmSetMaster and drmDropMaster calls to FreeBSD direct session
2018-09-10 21:11:22 -04:00
emersion 1fcecd68df backend/drm: de-allocate unused CRTCs
They can be re-used by another output after a subsequent hotplug.
2018-09-10 18:46:30 +02:00
mntmn e1c91884fb fix cursor loss w/ legacy drm and software cursor (tested on etnaviv) 2018-09-10 17:30:26 +02:00
sghctoma ba5df0d21d Fix build failure on non-FreeBSD systems
Accidentally included the FreeBSD-specific dev/evdev/input.h file on
other systems too. This commit fixes that.
2018-09-07 17:44:48 +02:00
sghctoma 7a5d3c4d3b Implement device type discovery using ioctl calls
This commit implements device type discovery by calling two ioctls
(DRM_IOCTL_VERSION and EVIOCGVERSION) on the device. These iocts are
specific to drm and input devices respectively, therefore we can
determine the device type based on which one returns an error.
2018-09-07 16:37:25 +02:00
sghctoma bbeed1bd31 Merge remote-tracking branch 'upstream/master' into fix-freebsd-direct-session 2018-09-07 15:45:20 +02:00
emersion 8a6bdc193d backend/drm: damage outputs when switching CRTCs 2018-09-04 23:10:37 +02:00
emersion 1342393632 backend/drm: cosmetic enhancements 2018-09-04 23:08:45 +02:00
emersion 5b13b8a12c backend/drm: consider continue not using resources
Fixes #1230
2018-09-04 22:57:09 +02:00
emersion fb94f03b43 backend/drm: prevent use of uninitialized data 2018-09-04 22:50:59 +02:00
emersion d605b2ea07 backend/drm: remove unused if 2018-09-04 22:49:54 +02:00
emersion 017cfb0b86 backend/drm: log when de-allocating CRTC 2018-09-04 19:44:44 +02:00
emersion b877daded1 backend/drm: better hotplug handling
This commit handles better situations in which the number of
connected outputs is greater than the number of available CRTCs.
It'll enable as many outputs as possible, and transfer CRTCs to
outputs that need one on unplug.

This changes CRTC and plane reallocation to happen after scanning
DRM connectors instead of on modeset.

This cleanups CRTCs and planes on unplug to allow them to be
re-used for other outputs.

On modeset, if an output doesn't have a CRTC, the desired mode is
saved and used later when the output gains a CRTC.

Future work includes giving priority to enabled outputs over
disabled ones for CRTC allocation. This requires the compositor to
know about all outputs (even outputs without CRTCs) to properly
modeset outputs enabled in the compositor config file and disable
outputs disabled in the config file.
2018-09-04 15:09:07 +02:00
sghctoma d948bffd3e Activate last active VT after compositor exit
The VT the compositor was started from was not activated after exiting
the compositor, which resulted in arriving on a blank VT. This commit
fixes that by introducing a new field in direct_session struct that
stores the last active VT so that it can be activated in
direct_session_destroy.
2018-09-02 20:28:06 +02:00
sghctoma 3b2b8c1844 Merge remote-tracking branch 'upstream/master' into fix-freebsd-direct-session 2018-09-02 18:32:31 +02:00
random human 7bc2657984
Free unused pointer in x11/backend.c 2018-09-02 20:52:09 +05:30
emersion 95d05acda5 backend/drm: fix invalid VLA size in scan_drm_connectors
I failed to see this issue with Valgrind because of the +1.
2018-09-02 10:11:23 +02:00
emersion ef88df2142 backend/drm: emit new_output after scanning connectors
This prevents receiving modesetting requests from the compositor
while we don't have the whole picture (ie. while we haven't yet
scanned all connectors).

This also makes connectors without CRTCs disabled (they can't be
enabled yet even if some CRTCs are free'd -- this is future work).
2018-09-02 01:03:20 +02:00
emersion e84f01168d backend/drm: allow disabling outputs in NEEDS_MODESET state
This correctly frees CRTCs when disabling outputs without setting
a mode.
2018-09-01 23:43:16 +02:00
random human 8589ae19de Fix bugs listed by clang's static analyzer
A few pedantic changes and unused variables (1-4), and genuine bugs (5,
6).

The reports with the corresponding files and lines numbers are as
follows.

1. backend/libinput/tablet_pad.c@31,44,57
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'unsigned int',
which is incompatible with sizeof operand type 'int'"

2. types/tablet_v2/wlr_tablet_v2_pad.c@371
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'uint32_t', which
is incompatible with sizeof operand type 'int'"

3. types/wlr_cursor.c@335
"Dead initialization"
"Value stored to 'dx'/'dy' during its initialization is never read"

4. rootston/xdg_shell.c@510
"Dead initialization"
"Value stored to 'desktop' during its initialization is never read"

5. types/tablet_v2/wlr_tablet_v2_pad.c@475
"Dereference of null pointer"
"Access to field 'strips' results in a dereference of a null pointer
(loaded from field 'current_client')"

The boolean logic was incorrect (c.f. the check in the following
function).

6. examples/idle.c@163,174,182
"Uninitialized argument value"
"1st function call argument is an uninitialized value"

If close_timeout != 0, but simulate_activity_timeout >= close_timeout,
the program would segfault at pthread_cancel(t1).
2018-08-31 19:41:18 +02:00
sghctoma 2bd6fbf20e Fix that major(st_rdev) have no meaning on FreeBSD
The major device number does not indicate the device type on FreeBSD,
and AFAIK the only way to differentiate between DRM, input, and other
devices is checking the fd path. This commit implements that.

The drmDropmaster and drmSetmaster calls are necessary, because the
implicit drop (that should occur when the DRM fd is closed) seems not
to be working in some scenarios (e.g. if you have a tmux session
running - maybe the fd is retained somehow by tmux?). This is a
problem, because once you exit the compositor, you can't start it (or
any other program that wants to be DRM master) again until you close
all your tmux sessions.
2018-08-30 11:15:39 +02:00
Drew DeVault 633663cdde Use legacy modesetting for gamma control
It doesn't look like there's any motion on a fix from the AMDGPU side,
and using the legacy interface for this isn't so bad.
2018-08-29 23:05:38 +02:00
Alexander Bakker 221d412824 Init the new destroy signals added by #1200 2018-08-27 18:21:36 +02:00
Alexander Bakker 20db29779e Add destroy signals to types that are destroyed by wl_display_destroy 2018-08-26 23:23:12 +02:00
Scott Anderson fd3fa760d3 Revert "Revert "Merge pull request #1194 from ascent12/meson_feature""
This reverts commit 9c886f20b9.
2018-08-24 19:35:02 +12:00
Drew DeVault 9c886f20b9 Revert "Merge pull request #1194 from ascent12/meson_feature"
This breaks wlroots when used as a meson subproject.

This reverts commit dea311992e, reversing
changes made to 6db9c4b746.
2018-08-23 21:00:58 -04:00
Scott Anderson 784c20c82f Use new options for X11 backend and Xwayland 2018-08-22 20:27:37 +12:00
Scott Anderson 94ed2fc7bb Use feature options for libcap/logind
We now use a combo choice between systemd/elogind as they are mutually
exclusive anyway.
2018-08-22 19:53:00 +12:00
emersion 7a3f7b3c8a backend/drm: add support for DRM_MODE_CONNECTOR_DPI 2018-08-21 13:05:38 +01:00
emersion d66d33f5a2
Merge pull request #1188 from emersion/freebsd-fixes
Fix build on FreeBSD
2018-08-16 11:02:21 +01:00
emersion f86f1daf9a Fix build on FreeBSD 2018-08-16 10:54:45 +01:00
sdilts 8e7df5eb88 Fix xcb_create_window parameters
Set the window width and height, not the location of the window.
2018-08-10 18:05:34 -06:00
sdilts da79fef5f7 Add guard for changing the size of X11 backend windows
Events that set the window to either a width or height of zero are now
ignored and logged.
2018-08-09 22:09:48 -06:00
sdilts 55cca6deaa Set default output size for X11 backend
Fixes issue #1170
Also set the created window size to match the output size.
2018-08-09 22:05:18 -06:00
Ilia Bozhinov cb42e16f64 session: load GPU devices even if they have zero crtcs/connectors/encoders
On some systems (most notably laptops with two GPUs) there are GPUs that
don't have attached outputs. However, we still want to load those GPUs
because they could still be used by the compositor for rendering.
2018-08-08 07:34:12 +03:00
Scott Anderson 2d8f53affd Check for DRM prime
This will indicate the user properly when multi-GPU is not supported by
their GPU driver.
2018-08-05 18:25:25 +12:00
Scott Anderson 1a2b3445dc Remove unused data from gbm_bo userdata
These aren't used anymore and crashes when the gbm_bo tries to get
destroyed (e.g. on hotplug).
2018-08-04 17:02:53 +12:00
Scott Anderson 4bee710c30 Fix hardware cursor on secondary GPU
Create rendering resources on parent GPU, so that we can sample the
passed in texture properly. The cursor buffer needs to remain on the
same GPU.
2018-08-04 15:08:28 +12:00
Mariusz Bialonczyk e547e55be0 multi-gpu: do not flip screens on secondary GPU
All screens on secondary GPU in multiple GPU configurations
was flipped 180.

The flipped screens was always on secondary card (the primary card
was always correct).

Tested on nouveau with:
WLR_DRM_DEVICES=/dev/dri/card1:/dev/dri/card2
WLR_DRM_DEVICES=/dev/dri/card2:/dev/dri/card1

The commit is fixing this problem. Now all screens are "normal".
2018-08-03 07:43:22 +02:00
Mariusz Bialonczyk 15dacebc36 multi-backend: do not expose internal renderers
backend_get_renderer() is now returning the renderer of the primary GPU, instead
of its own renderer, since that's the thing which actually does all of the "real"
rendering

wlr_multi_backend_add() is now adding all subbackends (otherwise only one GPU
is handled).

credits: @ascent12
2018-08-03 07:43:22 +02:00
emersion 364afced3e backend/drm: remove unnecessary casts 2018-08-02 23:33:59 +01:00
emersion 2ebecb6727 backend/drm: allow to pass empty gamma ramp to reset it 2018-08-02 23:33:59 +01:00
emersion a149c2370a Implement wlr-gamma-control-unstable-v1 2018-08-02 23:33:04 +01:00
Drew DeVault 4b096fc114 Revert "Merge pull request #1153 from emersion/include-config"
This reverts commit ef0a6ea4d2, reversing
changes made to 8d03bc9178.
2018-07-21 09:44:20 -04:00
emersion 41094a7df5 Always include config.h 2018-07-21 13:08:23 +01:00
Markus Ongyerth 36955204cf Remove last remnant of tool_tool in libinput 2018-07-14 09:49:58 +02:00
Markus Ongyerth d9e978e1b3 rename wlr_tablet_tool to wlr_tablet
The previous naming was based on the input-device capability names from
libinput.
With code that uses the libinput_tablet_tool and mapping into tablet-v2,
this is confusing, so the name is changed to follow the names used in
the protocol.
2018-07-14 09:49:58 +02:00
Markus Ongyerth 48e2cba9b6 Handle relative motion for mouse tools 2018-07-14 09:48:57 +02:00
Markus Ongyerth 3be916f9b8 Add asserts and rename destroy function in libinput backend 2018-07-14 09:48:57 +02:00
Markus Ongyerth 0c9a26828a Use wlr_list for paths, and improve inert resource handling 2018-07-14 09:43:17 +02:00
Markus Ongyerth adba68a3c1 Use tablet_tool impl in libinput backend 2018-07-14 09:43:16 +02:00
Markus Ongyerth 31cec36b74 1st feedback pass
Rename make_ functions to _create
Implement set_cursor and set_feedback
2018-07-14 09:43:16 +02:00
Markus Ongyerth 599f84f736 Fix borked rebase 2018-07-14 09:40:39 +02:00
Markus Ongyerth 5c7a37f309 Add tool buttons 2018-07-14 09:40:39 +02:00
Markus Ongyerth 391eef6ea9 Propagate most axis events to clients 2018-07-14 09:40:39 +02:00
Markus Ongyerth f375246657 Implement basic tablet_pad handling (bound to keyboard focus) 2018-07-14 09:40:39 +02:00
Markus Ongyerth e235f7d336 Basic tablet_v2 object lifetime 2018-07-14 09:40:39 +02:00
Markus Ongyerth 77bac448cc storage commit #2 2018-07-14 09:40:39 +02:00
Markus Ongyerth 000b305ecc backend/libinput: Manage tablet tool livetimes
This adds the management code to manage tablet tools lifetimes from
libinput.
It follows the suggestion made in the tablet-unstable-v2.xml to destroy
tablet_tools once all tablets that it got into contact with were removed
from the system. This is implemented via a refcount.

If a tool is *not* unique, it will be destroyed on proximity out. This
is libinput specific and mentioned in libinput docs that tools will not
be found again, so we shouldn't keep a reference to them.
Also they can't be on other tablets as well, because they cannot be
tracked.

The naming in this commit is a bit off (to not break things).
The wlr names stay the same, tablet_tool is the libinput_device with
capaiblity LIBINPUT_DEVICE_CAP_TABLET_TOOL which is more akin to
"tablet" in the tablet-unstable-v2 protocol.
The struct that corresponds to the tablet_tool in tablet-unstable-v2 is
called tablet_tool_tool, a rename should be done at some point in the
future.
2018-07-14 09:40:39 +02:00
Guido Günther 40fe252c2d x11: make sure event source is drained
Otherwise running under Xvfb will not deliver any events. This results
in e.g. weston-info reporting a 0x0 window size (which results in all
sorts of problems).
2018-07-11 17:34:43 +02:00
Guido Günther 8515b7c65b x11: use correct type for events in wl_event_loop_add_fd 2018-07-11 17:30:45 +02:00
Guido Günther e463b49166 x11: Check if xcb_configure_window worked
So far we did not check for any errors
2018-07-11 17:29:41 +02:00
emersion 7cbef15206
util: add wlr_ prefix to log symbols 2018-07-09 22:49:54 +01:00
Drew DeVault be54278207
Merge pull request #1095 from agx/output-add-mode
Allow to add additional modes to outputs
2018-07-07 08:58:17 -07:00
Guido Günther 8d72090afe drm: Allow to add additional modes
This allows to add additional modes to the list of available video modes
using VESA Coordinated Video Timing information.

Closes #1080
2018-07-07 14:51:39 +02:00
Drew DeVault 07209d062c
Merge pull request #1104 from VincentVanlaer/logind-fd-leak
Close fd's obtained from logind
2018-06-30 17:49:45 -07:00
Vincent Vanlaer ece58514b4 Close fd's obtained from logind 2018-07-01 02:22:57 +02:00
emersion 2b9cbaddf3
screencopy: add support for frame flags 2018-06-30 22:18:03 +01:00
Dominique Martinet 0c2a64df18 headless add_input_device: fix leak on error
Found through static analysis
2018-06-30 20:46:58 +09:00
Dominique Martinet e5348ad7d3 backend autocreate: fix leak when WLR_BACKENDS is set
Found through static analysis
2018-06-30 11:45:57 +09:00
Dominique Martinet 1940c6bbd9 wayland backend: fix width/height == 0 check
We cannot handle just one of the two being NULL later down the road
(e.g. divide by zero in matrix projection code),
just ignore any such configure request.

Found through static analysis
2018-06-30 11:38:21 +09:00
Dominique Martinet 266898ca1f direct session backend: fix closing -1 on error
Found through static analysis
2018-06-30 11:38:21 +09:00
Dominique Martinet bcc2c64c1e x11 backend init: fix leak on failed XOpenDisplay
Found through static analysis
2018-06-30 11:38:21 +09:00
Dominique Martinet 4f7b1382d4 wayland backend seat: fix NULL output check
The test was done after dereferencing output in pointer_handle_enter,
just move it up one line.
No reason pointer_handle_leave would not need the check if enter needs
it, add it there.

Found through static analysis.
2018-06-30 11:38:21 +09:00
Dominique Martinet f0d455f088 drm backend: overflow fixes
These operations are done in 32-bit arithmetics before being casted to 64-bit,
thus can overflow before the cast.
Casting early fixes the issue.

Found through static analysis
2018-06-30 11:21:22 +09:00
Drew DeVault e459fe0ec7
Merge pull request #992 from emersion/screencontent
Implement wlr_export_dmabuf_unstable_v1 protocol
2018-06-22 05:37:07 -07:00
Tobias Blass 482fc48c74 FIX: Suprocess loops endlessly when the control socket closes.
recvmsg(3) returns 0 if the connection partner has shut down its socket.
The communicate function considered 0 a successful message, though, and
keeps calling recvmsg(3) again and again.
2018-06-20 22:00:45 +02:00
emersion 57548b557a
Merge branch 'master' into screencontent 2018-06-17 14:49:18 +01:00
Scott Anderson 964e0a50be Check for seat0 properly 2018-06-14 21:02:32 +12:00
Scott Anderson 47985d2dc5 Multiseat fixes 2018-06-14 20:46:16 +12:00
emersion 551700e887
backend/wayland: fix keyboard keys not pressed/released when focus changes 2018-06-03 13:18:57 +01:00
emersion 21928cbe61
Merge branch 'master' into screencontent 2018-05-31 12:33:27 +01:00
emersion 28020ff577
Only allow one modifier per DMA-BUF, split attributes struct in render/ 2018-05-30 09:29:12 +01:00
emersion bd430b8620
backend/drm: support multi-planar DMA-BUFs when exporting 2018-05-29 18:47:17 +01:00
emersion 9e26808c28
output, backend/drm: add wlr_output_export_dmabuf 2018-05-29 18:45:45 +01:00
emersion 79683ee497
backend/drm: better connector cleanup, add more logs 2018-05-27 13:21:41 +01:00
emersion 6eb4b5b54d
Merge pull request #993 from emersion/bind-wl-drm-in-renderer
render: bind wl_drm in renderer
2018-05-25 13:54:16 +01:00
Ilia Bozhinov 24cf70ae96 backends: implement custom EGL and renderer initialization
Compositors now have more control over how the backend creates its
renderer. Currently all backends create an EGL/GLES2 renderer, so
the necessary attributes for creating the context are passed to a
user-provided callback function. It is responsible for initializing
provided wlr_egl and to return a renderer. On fail, return 0.

Fixes #987
2018-05-25 14:56:52 +03:00
emersion 41130fe54b
render: bind wl_drm in renderer 2018-05-21 19:07:08 +01:00
emersion 9e3dd6b560
backend/wayland: fix segfault when destroying backend before starting it 2018-05-19 09:34:16 +01:00
emersion 75b10cd621
backend: support creating DRM and libinput via WLR_BACKENDS 2018-05-19 09:32:08 +01:00
emersion 007d83c6ee
backend: allow multiple backends in WLR_BACKENDS 2018-05-19 09:09:03 +01:00
emersion 52bd8aa716
backend/multi: disallow multiple renderers at the same time 2018-05-19 09:09:03 +01:00
emersion a1631dd9ee
backend: add WLR_BACKEND env variable 2018-05-19 09:08:59 +01:00
Markus Ongyerth 6a46fcc6f2 recalculate cursor projection matrix on set_cursor
Updates the projection matrix for the cursor plane in the DRM backend,
when the cursor is set, so new cursor are uploaded with the correct
transformation.
2018-05-16 15:44:41 +02:00
emersion 198ad27bd5
backend/wayland: print output name in window title 2018-05-15 00:16:18 +01:00
emersion 0b58579564
Add support for discrete axis values 2018-05-12 13:34:58 +01:00
emersion 13098a18ea
Fix hardware cursors scale & transform 2018-05-09 19:58:18 +01:00
emersion caf9f9022c
Merge pull request #936 from emersion/full-hardware-cursors
output: always use hardware cursors if available
2018-05-04 19:00:45 +01:00
morganamilo 6305e6327f
Fix typos in comments and strings 2018-05-03 21:59:43 +01:00
Guido Günther 1637053ef8 drm: only disable atomic modesetting when WLR_DRM_NO_ATOMIC == 1
Don't allow any value of the env var to disable atomic mode setting.
2018-05-03 15:37:37 +02:00
Guido Günther 545d54439d backend/wayland: don't transform pointer events
We do this in a backend independent way in wlr_cursor now.
2018-05-03 11:09:14 +02:00
Guido Günther 6f01c12b40 backend/x11: don't transform pointer events
We do this in a backend independent way in wlr_cursor now.
2018-05-03 11:09:14 +02:00
emersion 225d182765
output: always use hardware cursors if available
This changes the `wlr_output_impl.set_cursor` function to take a
`wlr_texture` instead of a byte buffer. This simplifies the
DRM and Wayland backends since they were creating textures from
the byte buffer anyway.

With this commit, performance should be improved when moving the
cursor since outputs don't need to be re-rendered anymore.
2018-05-01 21:38:04 +01:00
emersion 178ac8bffe
backend/{wayland,x11}: fix pointer coords for transformed outputs 2018-04-30 10:48:35 +01:00
emersion 62d7337d00
backend/x11: add one pointer per output 2018-04-29 14:46:29 +01:00
emersion ddac792b61
backend/wayland: only set one pointer listener 2018-04-29 14:30:13 +01:00
emersion 9f8a7c8fc4
backend/wayland: create one virtual pointer per output 2018-04-29 14:30:13 +01:00
emersion 2551ef8871
input-device: add output_name field, populate it from libinput 2018-04-29 14:30:09 +01:00
emersion f8e0a03451
backend/x11: correctly destroy input devices 2018-04-28 12:55:36 +01:00
emersion 79da4c175e
backend/headless: remove useless destructor 2018-04-28 12:48:05 +01:00
emersion 57c36ddcb3
backend/wayland: add proper error handling to wlr_wl_backend_create 2018-04-28 12:38:03 +01:00
Drew DeVault fecb971518
Merge pull request #902 from emersion/various-memory-leaks
Various memory leaks
2018-04-26 11:34:49 +02:00
emersion cd9f25711c
backend: destroy renderer when destroying backend 2018-04-25 23:53:43 +01:00
emersion 625a7a48dc
Don't use the wlr_ prefix for static functions 2018-04-25 23:51:00 +01:00
emersion 71ca45e2c0
Make sure we don't use others' prefixes 2018-04-25 23:24:58 +01:00
emersion b0d99f5c67
Remove wlr_ prefix from local symbols 2018-04-25 23:00:46 +01:00
emersion 018b82c01e
render/egl: allow passing NULL to surface and image destructors 2018-04-25 08:28:48 +01:00
emersion eaed6bd03b
render/egl: add wlr_egl_destroy_surface 2018-04-24 23:44:43 +01:00
Drew DeVault dbdc63ddde
Merge pull request #873 from emersion/output-dont-emit-mode-twice
output: don't emit the mode event if it hasn't changed
2018-04-17 21:08:27 -04:00
emersion 94fa6c88f4
output: don't emit the mode event if it hasn't changed
This also fixes #535.
2018-04-18 00:15:25 +01:00
Uli Schlachter e5ab12339f x11 backend: Expose events mean "needs swap"
When the X11 server sends an expose event, that means that "this
rectangle here (the event contains x,y,width,height) has undefined
contents on your window; please redraw that". This means that we need a
swap. However, so far the code does not actually enforce that a swap
happens.

For example, start rootston, switch to another workspace and then switch
back. The rootston window will not be redrawn (before commit
52b058c2a3, it would just be fully white; after that commit it will
show whatever was visible on the old workspace). This is because the
drawing code concludes that nothing needs to be done. However, in fact a
swap is necessary.

This reverts commit e79d924588, because its optimisation is already
done now: wlr_output_update_needs_swap() emits a signal, which is
handled by wlr_output_damage with a call to wlr_output_schedule_frame().
This function does nothing if a frame is already pending. Thus, the
optimisation from commit e79d924588 now happens implicitly.

Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 11:41:09 +02:00
Uli Schlachter e79d924588 x11 backend: Ignore expose if frame is pending
When resizing rootston with the mouse, the result is really slow. One
can see that rootston needs quite a while for drawing the newly visible
area. This is because every single expose event is handled on its own
and causes (apparently) a full repaint or at least a swap.

This commit improves things by only causing a new frame if none is
pending already.

With this change, there is almost no delay in rootston drawing the newly
visible area.

Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 11:07:31 +02:00
Uli Schlachter 52b058c2a3 x11 backend: Do not set a back pixel on windows
Before this commit, the x11 server would fill any exposed area with
white before the wlroots x11 backend got a chance to do anything. This
was e.g. visible when running rootston and resizing the window: When the
window becomes larger, the new area is filled with black.

By just not setting a back pixel value, this commit gets rid of this
behaviour.

Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 11:07:31 +02:00
Uli Schlachter 98f8ec6a08 x11_handle_input_event: Remove return value
handle_x11_event() and x11_handle_input_event() react to different kinds
of events, so it does not make much of a difference if
x11_handle_input_event() signals if it handled an event or not.

Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 10:33:53 +02:00
Uli Schlachter 3728abd1fc handle_x11_event: Remove return value
This function always returns "false", so its return type can simply be
changed to void.

Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 10:32:30 +02:00
emersion d2ebbd103c
backend: remove wlr_backend_get_egl 2018-04-08 11:00:56 -04:00
emersion 03563b61a8
backend/{x11,headless}: use default if supplied refresh is invalid 2018-04-05 22:48:00 -04:00
Tancredi Orlando 68ad7e5092 Add ifdef to build without X11 2018-04-04 19:59:47 +02:00
emersion 2d6bbf12f8
backend/{x11,headless}: fix refresh rate 2018-04-03 22:54:01 -04:00
Drew DeVault 2ecce27dd5
Merge pull request #807 from swaywm/input-inhibit
Input inhibit
2018-04-03 15:58:47 -04:00
Drew DeVault 56deff41b6 Implement input inhibit in rootston 2018-04-03 15:09:53 -04:00
emersion 9609985f29
backend/x11: fix cursor position when receiving configure event 2018-04-03 13:32:24 -04:00
emersion 60f07ee321
backend/x11: fix WLR_HAS_XCB_XKB always undefined 2018-04-03 13:12:52 -04:00
Drew DeVault 8b37e8f67a
Merge pull request #792 from emersion/x11-backend-blank-cursor
backend/x11: hide cursor
2018-04-02 10:21:07 -04:00
Drew DeVault b60e31e5c0
Merge pull request #794 from emersion/renderer-untie-backend
Untie wlr_backend from wlr_renderer
2018-03-31 21:31:15 -04:00
emersion a2391a6047
Fix cursor transform on DRM backend 2018-03-31 20:55:31 -04:00
emersion 33a2eb4b77
Untie wlr_backend from wlr_renderer 2018-03-31 18:49:43 -04:00
emersion 37aae0b2cd
backend/x11: flush after destroying window
Otherwise the destroy message is kept buffered and never reaches
the X11 server. Thanks X11.
2018-03-31 13:28:50 -04:00
emersion 7b88ace557
backend/x11: hide cursor 2018-03-31 12:10:43 -04:00
emersion 5111f7df84
backend/x11: fix extra output 2018-03-30 23:51:20 -04:00
emersion f37e8c5b6e
backend/wayland: cleanup input transform code 2018-03-30 23:51:20 -04:00
emersion aa6ae710f7
backend/x11: fix input events 2018-03-30 23:51:19 -04:00
emersion 0a7a8cbd1c
backend/x11: add WLR_X11_OUTPUTS support 2018-03-30 23:51:19 -04:00
emersion d4f7ced6e2
backend/x11: refactor, prepare support for multiple outputs 2018-03-30 23:51:16 -04:00
emersion 5dd022da13
Merge pull request #765 from swaywm/transformed-events
Use libinput transformed events instead of width_mm/height_mm
2018-03-28 14:11:39 -04:00
Drew DeVault 3813121fef Fix wayland output absolute input handling 2018-03-28 14:04:23 -04:00
Drew DeVault 52d621e097
Merge pull request #763 from emersion/x11-backend-kbd-modifiers
backend/x11: correctly update keyboard modifiers
2018-03-28 12:51:08 -04:00
Drew DeVault ac219cbda6 Remove width_mm from tablet events 2018-03-28 12:05:37 -04:00
Drew DeVault 324b9d910d Remove width_mm from wlr_touch events 2018-03-28 11:04:40 -04:00
Drew DeVault a35a5786b0 Remove width_mm from wlr_pointer events 2018-03-28 10:46:50 -04:00
emersion f033f717a2
backend/x11: make xcb-xkb optional, remove global state 2018-03-28 00:26:15 -04:00
Tony Crisci 330ee08126
Merge pull request #744 from emersion/texture-redesign
Redesign wlr_texture
2018-03-28 00:14:57 -04:00
emersion 8d1b5c7600
backend/x11: correctly update keyboard modifiers 2018-03-28 00:04:32 -04:00
Dominique Martinet a0b52a0dff Fix x11 backend
Need to include wlr/config.h before using the various WLR_HAS_xxx defines
2018-03-27 09:20:21 +02:00
Drew DeVault b1c4f01bad
Merge pull request #713 from ManDay/master
Make X11 fully optional
2018-03-26 23:20:46 -04:00
Drew DeVault 706f77e3c7 Address review feedback 2018-03-26 23:15:21 -04:00
emersion adf4fb08dd
Merge branch 'master' into texture-redesign 2018-03-26 19:13:13 -04:00
emersion 3bda7e2ef8
Use DRM_FORMAT_MOD_LINEAR instead of a hardcoded constant 2018-03-26 12:00:08 -04:00
Uli Schlachter c7f8b28d8d Fix use-after-free in x11 backend during shutdown
The xcb_connection_t instance that is used here comes from
XGetXCBConnection(), is created by XOpenDisplay(), and is owned by the
returned Display*. Calling xcb_disconnect() directly on it leads to
various use-after-frees during shutdown, as reported by valgrind. The
first one of the about 30 errors is:

    Invalid read of size 4
       at 0x71F2051: xcb_take_socket (in /usr/lib64/libxcb.so.1.1.0)
       by 0x78551DD: ??? (in /usr/lib64/libX11.so.6.3.0)
       by 0x7855A14: _XFlush (in /usr/lib64/libX11.so.6.3.0)
       by 0x7858504: _XGetRequest (in /usr/lib64/libX11.so.6.3.0)
       by 0x7838966: XFreeGC (in /usr/lib64/libX11.so.6.3.0)
       by 0x783238B: XCloseDisplay (in /usr/lib64/libX11.so.6.3.0)
       by 0x4E680C2: wlr_x11_backend_destroy (backend.c:333)
       by 0x4E57E94: wlr_backend_destroy (backend.c:39)
       by 0x4E629FB: multi_backend_destroy (backend.c:47)
       by 0x4E62B5A: handle_display_destroy (backend.c:90)
       by 0x50B7E9F: ??? (in /usr/lib64/libwayland-server.so.0.1.0)
       by 0x50B8476: wl_display_destroy (in /usr/lib64/libwayland-server.so.0.1.0)
     Address 0xc14dda0 is 0 bytes inside a block of size 21,152 free'd
       at 0x4C2DD18: free (vg_replace_malloc.c:530)
       by 0x4E680A5: wlr_x11_backend_destroy (backend.c:330)
       by 0x4E57E94: wlr_backend_destroy (backend.c:39)
       by 0x4E629FB: multi_backend_destroy (backend.c:47)
       by 0x4E62B5A: handle_display_destroy (backend.c:90)
       by 0x50B7E9F: ??? (in /usr/lib64/libwayland-server.so.0.1.0)
       by 0x50B8476: wl_display_destroy (in /usr/lib64/libwayland-server.so.0.1.0)
       by 0x40C54E: main (main.c:84)
     Block was alloc'd at
       at 0x4C2EA1E: calloc (vg_replace_malloc.c:711)
       by 0x71F0C60: xcb_connect_to_fd (in /usr/lib64/libxcb.so.1.1.0)
       by 0x71F4BD4: xcb_connect_to_display_with_auth_info (in /usr/lib64/libxcb.so.1.1.0)
       by 0x7854AA1: _XConnectXCB (in /usr/lib64/libX11.so.6.3.0)
       by 0x7845481: XOpenDisplay (in /usr/lib64/libX11.so.6.3.0)
       by 0x4E681B6: wlr_x11_backend_create (backend.c:376)
       by 0x4E580EE: wlr_backend_autocreate (backend.c:99)
       by 0x40C27D: main (main.c:35)

Normally, one would expect this to crash during XCloseDisplay() when
xcb_disconnect() is called again and frees the same data again (glibc would
detect a double free). However, XCloseDisplay() tries to clean up some internal
caches first for which it has to send requests to the X11 server (e.g. the
XFreeGC() above). This fails since the file descriptor was already closed,
which causes an IO error. Xlib's _XDefaultIOError() handles this by printing an
error message and calling exit(1).

Thus, the only symptom of this problem was compositors exiting
mid-shutdown and printing an error message:

    XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
          after 6 requests (6 known processed) with 0 events remaining.

Fixes: https://github.com/swaywm/wlroots/issues/745
Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-03-26 10:48:30 +02:00
emersion c63d94483b
Redesign wlr_texture
- Textures are now immutable (apart from those created from raw
  pixels), no more invalid textures
- Move all wl_drm stuff in wlr_renderer
- Most of wlr_texture fields are now private
- Remove some duplicated DMA-BUF code in the DRM backend
- Add more assertions
- Stride is now always given as bytes rather than pixels
- Drop wl_shm functions

Fun fact: this patch has been written 10,000 meters up in the air.
2018-03-24 23:48:32 -04:00
Cedric Sodhi 51141dd11e Minor corrections 2018-03-23 10:28:36 +01:00
emersion a854c2f246
Merge branch 'master' into gles2-renderer-redesign 2018-03-23 00:55:55 +01:00
Drew DeVault ef3769851f
Merge pull request #740 from emersion/egl-debug
render/egl: use EGL_KHR_debug
2018-03-22 18:54:21 -04:00
Dominique Martinet d5e14ab247 wayland backend: fix use-after free on output destroy
==12021==ERROR: AddressSanitizer: heap-use-after-free on address 0x617000015698 at pc 0x7f1a9abe1c09 bp 0x7ffe9068f6b0 sp 0x7ffe9068f6a0
WRITE of size 4 at 0x617000015698 thread T0
    #0 0x7f1a9abe1c08 in pointer_handle_leave ../backend/wayland/wl_seat.c:40
    #1 0x7f1a96ae7d1d in ffi_call_unix64 (/lib64/libffi.so.6+0x5d1d)
    #2 0x7f1a96ae768e in ffi_call (/lib64/libffi.so.6+0x568e)
    #3 0x7f1a988e0d8a  (/lib64/libwayland-client.so.0+0x8d8a)
    #4 0x7f1a988dd927  (/lib64/libwayland-client.so.0+0x5927)
    #5 0x7f1a988debe3 in wl_display_dispatch_queue_pending (/lib64/libwayland-client.so.0+0x6be3)
    #6 0x7f1a9abdd6d6 in dispatch_events ../backend/wayland/backend.c:28
    #7 0x7f1a9a968c11 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0x9c11)
    #8 0x7f1a9a967449 in wl_display_run (/lib64/libwayland-server.so.0+0x8449)
    #9 0x418dff in main ../rootston/main.c:81
    #10 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
    #11 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)

0x617000015698 is located 664 bytes inside of 696-byte region [0x617000015400,0x6170000156b8)
freed by thread T0 here:
    #0 0x7f1a9af754b8 in __interceptor_free (/lib64/libasan.so.4+0xde4b8)
    #1 0x7f1a9abe01ee in wlr_wl_output_destroy ../backend/wayland/output.c:194
    #2 0x7f1a9ac12918 in wlr_output_destroy ../types/wlr_output.c:299
    #3 0x7f1a9abe061b in xdg_toplevel_handle_close ../backend/wayland/output.c:255
    #4 0x7f1a96ae7d1d in ffi_call_unix64 (/lib64/libffi.so.6+0x5d1d)
    #5 0x7f1a96ae768e in ffi_call (/lib64/libffi.so.6+0x568e)
    #6 0x7f1a988e0d8a  (/lib64/libwayland-client.so.0+0x8d8a)
    #7 0x7f1a988dd927  (/lib64/libwayland-client.so.0+0x5927)
    #8 0x7f1a988debe3 in wl_display_dispatch_queue_pending (/lib64/libwayland-client.so.0+0x6be3)
    #9 0x7f1a9abdd6d6 in dispatch_events ../backend/wayland/backend.c:28
    #10 0x7f1a9a968c11 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0x9c11)
    #11 0x7f1a9a967449 in wl_display_run (/lib64/libwayland-server.so.0+0x8449)
    #12 0x418dff in main ../rootston/main.c:81
    #13 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
    #14 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)

previously allocated by thread T0 here:
    #0 0x7f1a9af75a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
    #1 0x7f1a9abe0703 in wlr_wl_output_create ../backend/wayland/output.c:272
    #2 0x7f1a9abdd8eb in wlr_wl_backend_start ../backend/wayland/backend.c:55
    #3 0x7f1a9abbeb49 in wlr_backend_start ../backend/backend.c:28
    #4 0x7f1a9abd8ce1 in multi_backend_start ../backend/multi/backend.c:24
    #5 0x7f1a9abbeb49 in wlr_backend_start ../backend/backend.c:28
    #6 0x418c32 in main ../rootston/main.c:58
    #7 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
    #8 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
2018-03-22 21:27:49 +01:00
Dominique Martinet b0c2bbebd1 x11 backend: fix various leaks
- xcb_query_pointer_reply return value needs to be freed
 - call XCloseDisplay
 - remove wl event_source
2018-03-22 21:25:41 +01:00
emersion 60bfe0a6aa
backend/drm: remove remaining raw GL call
This makes the hardware cursor code a less efficient. Can be
fixed with a GLES3 renderer.
2018-03-21 11:34:08 +01:00
emersion b1f93bc5cc
render/egl: use EGL_KHR_debug 2018-03-21 10:42:43 +01:00
emersion 3581573bdc
render/gles2: make wlr_renderer_begin take viewport size
This allows raw GL calls outside wlr_renderer to be removed.
2018-03-21 07:37:09 +01:00
emersion c41de2d1be
render: split render.h into wlr_renderer.h and wlr_texture.h 2018-03-19 23:16:29 +01:00
emersion 6227da96b1
backend/drm: don't hardcode matrix 2018-03-18 11:34:23 +01:00
emersion 7894fca224
matrix: rename wlr_matrix_texture to wlr_matrix_projection 2018-03-15 21:26:45 +01:00
emersion 876f07e9f1
renderer: replace wlr_texture_get_matrix by wlr_render_texture 2018-03-15 19:31:02 +01:00
emersion 824a95ad19
matrix: use 2D matrices 2018-03-15 15:33:58 +01:00
emersion d26b67cb06
matrix: unify API, don't use array pointers 2018-03-15 11:10:56 +01:00
emersion b6a3f240c7
matrix: move to types/ 2018-03-15 09:11:27 +01:00
Tony Crisci efa9eeb5d5
Merge pull request #716 from emersion/fix-cursor-hotspot-update
Fix cursor hotspot update
2018-03-12 21:50:07 -04:00
emersion d24f868bbe
backend/drm: fix cursor hotspot not updated 2018-03-12 19:34:43 +01:00
emersion 7cdad5cde4
Merge pull request #710 from emersion/dont-move-hidden-cursors
output: don't move hidden cursors
2018-03-12 14:25:20 +01:00
emersion 92ca4ad474
backend/drm: refactor wlr_drm_connector_set_cursor 2018-03-11 11:40:03 +01:00