On some systems (most notably laptops with two GPUs) there are GPUs that
don't have attached outputs. However, we still want to load those GPUs
because they could still be used by the compositor for rendering.
All screens on secondary GPU in multiple GPU configurations
was flipped 180.
The flipped screens was always on secondary card (the primary card
was always correct).
Tested on nouveau with:
WLR_DRM_DEVICES=/dev/dri/card1:/dev/dri/card2
WLR_DRM_DEVICES=/dev/dri/card2:/dev/dri/card1
The commit is fixing this problem. Now all screens are "normal".
backend_get_renderer() is now returning the renderer of the primary GPU, instead
of its own renderer, since that's the thing which actually does all of the "real"
rendering
wlr_multi_backend_add() is now adding all subbackends (otherwise only one GPU
is handled).
credits: @ascent12
The previous naming was based on the input-device capability names from
libinput.
With code that uses the libinput_tablet_tool and mapping into tablet-v2,
this is confusing, so the name is changed to follow the names used in
the protocol.
This adds the management code to manage tablet tools lifetimes from
libinput.
It follows the suggestion made in the tablet-unstable-v2.xml to destroy
tablet_tools once all tablets that it got into contact with were removed
from the system. This is implemented via a refcount.
If a tool is *not* unique, it will be destroyed on proximity out. This
is libinput specific and mentioned in libinput docs that tools will not
be found again, so we shouldn't keep a reference to them.
Also they can't be on other tablets as well, because they cannot be
tracked.
The naming in this commit is a bit off (to not break things).
The wlr names stay the same, tablet_tool is the libinput_device with
capaiblity LIBINPUT_DEVICE_CAP_TABLET_TOOL which is more akin to
"tablet" in the tablet-unstable-v2 protocol.
The struct that corresponds to the tablet_tool in tablet-unstable-v2 is
called tablet_tool_tool, a rename should be done at some point in the
future.
Otherwise running under Xvfb will not deliver any events. This results
in e.g. weston-info reporting a 0x0 window size (which results in all
sorts of problems).
We cannot handle just one of the two being NULL later down the road
(e.g. divide by zero in matrix projection code),
just ignore any such configure request.
Found through static analysis
The test was done after dereferencing output in pointer_handle_enter,
just move it up one line.
No reason pointer_handle_leave would not need the check if enter needs
it, add it there.
Found through static analysis.
These operations are done in 32-bit arithmetics before being casted to 64-bit,
thus can overflow before the cast.
Casting early fixes the issue.
Found through static analysis
recvmsg(3) returns 0 if the connection partner has shut down its socket.
The communicate function considered 0 a successful message, though, and
keeps calling recvmsg(3) again and again.
Compositors now have more control over how the backend creates its
renderer. Currently all backends create an EGL/GLES2 renderer, so
the necessary attributes for creating the context are passed to a
user-provided callback function. It is responsible for initializing
provided wlr_egl and to return a renderer. On fail, return 0.
Fixes#987
Updates the projection matrix for the cursor plane in the DRM backend,
when the cursor is set, so new cursor are uploaded with the correct
transformation.
This changes the `wlr_output_impl.set_cursor` function to take a
`wlr_texture` instead of a byte buffer. This simplifies the
DRM and Wayland backends since they were creating textures from
the byte buffer anyway.
With this commit, performance should be improved when moving the
cursor since outputs don't need to be re-rendered anymore.
When the X11 server sends an expose event, that means that "this
rectangle here (the event contains x,y,width,height) has undefined
contents on your window; please redraw that". This means that we need a
swap. However, so far the code does not actually enforce that a swap
happens.
For example, start rootston, switch to another workspace and then switch
back. The rootston window will not be redrawn (before commit
52b058c2a3, it would just be fully white; after that commit it will
show whatever was visible on the old workspace). This is because the
drawing code concludes that nothing needs to be done. However, in fact a
swap is necessary.
This reverts commit e79d924588, because its optimisation is already
done now: wlr_output_update_needs_swap() emits a signal, which is
handled by wlr_output_damage with a call to wlr_output_schedule_frame().
This function does nothing if a frame is already pending. Thus, the
optimisation from commit e79d924588 now happens implicitly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When resizing rootston with the mouse, the result is really slow. One
can see that rootston needs quite a while for drawing the newly visible
area. This is because every single expose event is handled on its own
and causes (apparently) a full repaint or at least a swap.
This commit improves things by only causing a new frame if none is
pending already.
With this change, there is almost no delay in rootston drawing the newly
visible area.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this commit, the x11 server would fill any exposed area with
white before the wlroots x11 backend got a chance to do anything. This
was e.g. visible when running rootston and resizing the window: When the
window becomes larger, the new area is filled with black.
By just not setting a back pixel value, this commit gets rid of this
behaviour.
Signed-off-by: Uli Schlachter <psychon@znc.in>
handle_x11_event() and x11_handle_input_event() react to different kinds
of events, so it does not make much of a difference if
x11_handle_input_event() signals if it handled an event or not.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The xcb_connection_t instance that is used here comes from
XGetXCBConnection(), is created by XOpenDisplay(), and is owned by the
returned Display*. Calling xcb_disconnect() directly on it leads to
various use-after-frees during shutdown, as reported by valgrind. The
first one of the about 30 errors is:
Invalid read of size 4
at 0x71F2051: xcb_take_socket (in /usr/lib64/libxcb.so.1.1.0)
by 0x78551DD: ??? (in /usr/lib64/libX11.so.6.3.0)
by 0x7855A14: _XFlush (in /usr/lib64/libX11.so.6.3.0)
by 0x7858504: _XGetRequest (in /usr/lib64/libX11.so.6.3.0)
by 0x7838966: XFreeGC (in /usr/lib64/libX11.so.6.3.0)
by 0x783238B: XCloseDisplay (in /usr/lib64/libX11.so.6.3.0)
by 0x4E680C2: wlr_x11_backend_destroy (backend.c:333)
by 0x4E57E94: wlr_backend_destroy (backend.c:39)
by 0x4E629FB: multi_backend_destroy (backend.c:47)
by 0x4E62B5A: handle_display_destroy (backend.c:90)
by 0x50B7E9F: ??? (in /usr/lib64/libwayland-server.so.0.1.0)
by 0x50B8476: wl_display_destroy (in /usr/lib64/libwayland-server.so.0.1.0)
Address 0xc14dda0 is 0 bytes inside a block of size 21,152 free'd
at 0x4C2DD18: free (vg_replace_malloc.c:530)
by 0x4E680A5: wlr_x11_backend_destroy (backend.c:330)
by 0x4E57E94: wlr_backend_destroy (backend.c:39)
by 0x4E629FB: multi_backend_destroy (backend.c:47)
by 0x4E62B5A: handle_display_destroy (backend.c:90)
by 0x50B7E9F: ??? (in /usr/lib64/libwayland-server.so.0.1.0)
by 0x50B8476: wl_display_destroy (in /usr/lib64/libwayland-server.so.0.1.0)
by 0x40C54E: main (main.c:84)
Block was alloc'd at
at 0x4C2EA1E: calloc (vg_replace_malloc.c:711)
by 0x71F0C60: xcb_connect_to_fd (in /usr/lib64/libxcb.so.1.1.0)
by 0x71F4BD4: xcb_connect_to_display_with_auth_info (in /usr/lib64/libxcb.so.1.1.0)
by 0x7854AA1: _XConnectXCB (in /usr/lib64/libX11.so.6.3.0)
by 0x7845481: XOpenDisplay (in /usr/lib64/libX11.so.6.3.0)
by 0x4E681B6: wlr_x11_backend_create (backend.c:376)
by 0x4E580EE: wlr_backend_autocreate (backend.c:99)
by 0x40C27D: main (main.c:35)
Normally, one would expect this to crash during XCloseDisplay() when
xcb_disconnect() is called again and frees the same data again (glibc would
detect a double free). However, XCloseDisplay() tries to clean up some internal
caches first for which it has to send requests to the X11 server (e.g. the
XFreeGC() above). This fails since the file descriptor was already closed,
which causes an IO error. Xlib's _XDefaultIOError() handles this by printing an
error message and calling exit(1).
Thus, the only symptom of this problem was compositors exiting
mid-shutdown and printing an error message:
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 6 requests (6 known processed) with 0 events remaining.
Fixes: https://github.com/swaywm/wlroots/issues/745
Signed-off-by: Uli Schlachter <psychon@znc.in>
- Textures are now immutable (apart from those created from raw
pixels), no more invalid textures
- Move all wl_drm stuff in wlr_renderer
- Most of wlr_texture fields are now private
- Remove some duplicated DMA-BUF code in the DRM backend
- Add more assertions
- Stride is now always given as bytes rather than pixels
- Drop wl_shm functions
Fun fact: this patch has been written 10,000 meters up in the air.
==12021==ERROR: AddressSanitizer: heap-use-after-free on address 0x617000015698 at pc 0x7f1a9abe1c09 bp 0x7ffe9068f6b0 sp 0x7ffe9068f6a0
WRITE of size 4 at 0x617000015698 thread T0
#0 0x7f1a9abe1c08 in pointer_handle_leave ../backend/wayland/wl_seat.c:40
#1 0x7f1a96ae7d1d in ffi_call_unix64 (/lib64/libffi.so.6+0x5d1d)
#2 0x7f1a96ae768e in ffi_call (/lib64/libffi.so.6+0x568e)
#3 0x7f1a988e0d8a (/lib64/libwayland-client.so.0+0x8d8a)
#4 0x7f1a988dd927 (/lib64/libwayland-client.so.0+0x5927)
#5 0x7f1a988debe3 in wl_display_dispatch_queue_pending (/lib64/libwayland-client.so.0+0x6be3)
#6 0x7f1a9abdd6d6 in dispatch_events ../backend/wayland/backend.c:28
#7 0x7f1a9a968c11 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0x9c11)
#8 0x7f1a9a967449 in wl_display_run (/lib64/libwayland-server.so.0+0x8449)
#9 0x418dff in main ../rootston/main.c:81
#10 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
#11 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
0x617000015698 is located 664 bytes inside of 696-byte region [0x617000015400,0x6170000156b8)
freed by thread T0 here:
#0 0x7f1a9af754b8 in __interceptor_free (/lib64/libasan.so.4+0xde4b8)
#1 0x7f1a9abe01ee in wlr_wl_output_destroy ../backend/wayland/output.c:194
#2 0x7f1a9ac12918 in wlr_output_destroy ../types/wlr_output.c:299
#3 0x7f1a9abe061b in xdg_toplevel_handle_close ../backend/wayland/output.c:255
#4 0x7f1a96ae7d1d in ffi_call_unix64 (/lib64/libffi.so.6+0x5d1d)
#5 0x7f1a96ae768e in ffi_call (/lib64/libffi.so.6+0x568e)
#6 0x7f1a988e0d8a (/lib64/libwayland-client.so.0+0x8d8a)
#7 0x7f1a988dd927 (/lib64/libwayland-client.so.0+0x5927)
#8 0x7f1a988debe3 in wl_display_dispatch_queue_pending (/lib64/libwayland-client.so.0+0x6be3)
#9 0x7f1a9abdd6d6 in dispatch_events ../backend/wayland/backend.c:28
#10 0x7f1a9a968c11 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0x9c11)
#11 0x7f1a9a967449 in wl_display_run (/lib64/libwayland-server.so.0+0x8449)
#12 0x418dff in main ../rootston/main.c:81
#13 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
#14 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
previously allocated by thread T0 here:
#0 0x7f1a9af75a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f1a9abe0703 in wlr_wl_output_create ../backend/wayland/output.c:272
#2 0x7f1a9abdd8eb in wlr_wl_backend_start ../backend/wayland/backend.c:55
#3 0x7f1a9abbeb49 in wlr_backend_start ../backend/backend.c:28
#4 0x7f1a9abd8ce1 in multi_backend_start ../backend/multi/backend.c:24
#5 0x7f1a9abbeb49 in wlr_backend_start ../backend/backend.c:28
#6 0x418c32 in main ../rootston/main.c:58
#7 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
#8 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
The current mode was set to NULL to abuse it as state variable
persisting DRM suspend/resume, this results resulted in a segfault on
normal DPMS cycle.
This reverts that change and uses the wlr_output enabled variable, which
also persists and makes more sense.
Legacy gamma lut size now uses the new legacy_crtc member of
wlr_drm_crtc. This was Previously doen using old_crtc in
wlr_drm_connector, but since this refers to the crtc that was connected to
the ouput, this could give the wrong result.
On the drm output the wlr_drm_connector structs are reused.
This struct contains the wlr_output struct, which is reused as well.
The old code kept modes/edid and output state persistent over hotplug.
This nulls the relevant strings, reads newer edid data and removes old
modes on unplug.
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.
The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
The wlr_drm_surface_init function is called (upon others) when the drm
mode is changed.
When the surface was used previously this replaced the gbm_surface, but
did not replace the gbm buffers (front/back).
With this, wlr_drm_surface_get_from never set up the new buffers with
the new glViewport because surf->front existed.
This frees the buffers to get new buffers on the new surface with the
new viewport.
Right now, we are adding systemd and elogind backends to the build
system as soon as their libraries are found on the build system.
Instead, we should only add them if the libraries have been found _and_
the user has actually requested them to be included.
since we're looking at pointer differences.
Otherwise the build fails on arm like
In file included from ../backend/drm/drm.c:19:0:
../include/wlr/util/log.h:34:17: error: format '%jd' expects argument of type 'intmax_t', but argument 7 has type 'int' [-Werror=format=]
_wlr_log(verb, "[%s:%d] " fmt, _strip_path(__FILE__), __LINE__, ##__VA_ARGS__)
^
../backend/drm/drm.c:462:2: note: in expansion of macro 'wlr_log'
wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
^~~~~~~
../backend/drm/drm.c:462:39: note: format string is defined here
wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
~~^
%d
This backports some changes to #319 to fix the screenshooter data
format. This also adds wlr_backend_get_renderer which will be
useful to support multiple renderers.
This adds back `wlr_output::needs_swap`. This allows a backend to
request buffer swaps even if the output isn't damaged. This is
needed by the DRM backend to trigger pageflips when the cursor
moves.
Same as what atomic_crtc_set_cursor does
Core was generated by `_build/rootston/rootston'.
Program terminated with signal SIGSEGV, Segmentation fault.
0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
170 if (!crtc || !crtc->cursor) {
(gdb) bt
0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
1 0xb6f2a856 in wlr_drm_connector_move_cursor (output=0x2242b28, x=0, y=0) at ../backend/drm/drm.c:634
2 0xb6f3cea0 in wlr_output_cursor_set_image (cursor=0x21a0338, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4) at ../types/wlr_output.c:516
3 0xb6f39da2 in wlr_cursor_set_image (cur=0x22cfc90, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4, scale=1) at ../types/wlr_cursor.c:310
4 0xb6f44d2a in wlr_xcursor_manager_set_cursor_image (manager=0x22cfd10, name=0x434420 "left_ptr", cursor=0x22cfc90) at ../types/wlr_xcursor_manager.c:80
5 0x00431c0a in roots_seat_configure_xcursor (seat=0x22cef08) at ../rootston/seat.c:515
6 0x0043137c in roots_seat_init_cursor (seat=0x22cef08) at ../rootston/seat.c:210
7 0x004315ec in roots_seat_create (input=0x218d220, name=0x434594 "seat0") at ../rootston/seat.c:289
8 0x0042ecba in input_get_seat (input=0x218d220, name=0x434594 "seat0") at ../rootston/input.c:39
9 0x0042ed04 in input_add_notify (listener=0x218d228, data=0x218d3b0) at ../rootston/input.c:54
10 0xb6f2f2e6 in wl_signal_emit (signal=0x1ea548c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
11 0xb6f2f572 in input_add_reemit (listener=0x1ea9990, data=0x218d3b0) at ../backend/multi/backend.c:101
12 0xb6f2db7e in wl_signal_emit (signal=0x1ea992c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
13 0xb6f2ddaa in handle_device_added (backend=0x1ea9920, libinput_dev=0x2292598) at ../backend/libinput/events.c:87
14 0xb6f2e164 in wlr_libinput_event (backend=0x1ea9920, event=0x2292b78) at ../backend/libinput/events.c:198
15 0xb6f2d678 in wlr_libinput_readable (fd=23, mask=1, _backend=0x1ea9920) at ../backend/libinput/backend.c:28
16 0xb6f2d7c0 in wlr_libinput_backend_start (_backend=0x1ea9920) at ../backend/libinput/backend.c:74
17 0xb6f27170 in wlr_backend_start (backend=0x1ea9920) at ../backend/backend.c:30
18 0xb6f2f320 in multi_backend_start (wlr_backend=0x1ea5480) at ../backend/multi/backend.c:22
19 0xb6f27170 in wlr_backend_start (backend=0x1ea5480) at ../backend/backend.c:30
20 0x0042fbc6 in main (argc=1, argv=0xbe89dd04) at ../rootston/main.c:60
Add a remote display name argument to wlr_wl_backend_create.
If NULL is passed to the wayland backend at all times, creating a
wayland backend *after* the compositor was started up, would require
changing the WAYLAND_DISPLAY environment variable.
Without this patch I'm getting the following build error when building
with Nix:
FAILED: backend/wlr_backend@sta/session_direct-ipc.c.o
In file included from ../backend/session/direct-ipc.c:20:0:
/nix/store/9ac27wk5vh47p28gladbdfafpidrx9rh-libdrm-2.4.88-dev/include/xf86drm.h:40:17: fatal error: drm.h: No such file or directory
#include <drm.h>
^
compilation terminated.
* Moved os-compatibility.c to util
* Added header under util
* Removed static since it isn't needed (i think so)
* Adjusted meson.build to include lib_wlr
Improved some codestyle
* Added guard to os-compatibility.h
* Fixed typo in include statment
Adjusted Guard
* Changed guard to _WLR_UTIL_OS_COMPATIBILITY
Xwayland uses SIGUSR1 to signal readiness.
With direct(-freebsd) session and Xwayland, wlroots was confusing the
Xwayland readiness signal with a vt switch signal, freezing the desktop.
Same problem was found in Weston in 2014:
https://phabricator.freedesktop.org/T7080
We now use doubles until the last minute, which makes it so we can move
the pointer more precisely. This also includes a fix for tablet tools,
which move absolutely and sometimes do not update the X or Y axis.
In pointer.c, some axis event was emitted even if the event pointer did not have
current axis.
In X11 backend pointer scroll events seem to be composed of both BUTTON_PRESS
and BUTTON_RELEASE. Therefore we should skip one of them (RELEASE) to avoid
event duplication.
- xdg toplevel configure can be called with 0 width/height,
in that case we are free to do as we like (so do nothing)
- need a display roundtrip after everything is setup but before
we start attaching buffers to the surface
Note that this does not go on to the next backend, because
attempt_wl_backend does not check if we have any output created.
We cannot test simply because (right now) a run of our examples will go
in this function twice, the first of which will (rightly?) return no
display but needs to return backend creation success.
This runs through events pending at init on initialization so we can
tell if some devices are available.
Note that with the way wlr_device_lists is managed, this checks that
there is at least one device we handle - it doesn't have to be a
keyboard, but there is at least a mouse or tablet_pad or something
that we care about.
Instead of failing inconditionally it might be better to leave the
decision to the user, e.g. add a "backend_has_devices" function to
call later.
(Tested by moving /dev/input off)
Fixes#24.
- 'libinput' (backend's) to libinput_context
- 'device' (libinput_device) to libinput_dev
- 'dev' (wlr_device) to wlr_dev
- 'devices' lists tangling of libinput devices to wlr_devices
- 'devices' list of wlr_devices in backend state to wlr_device_lists
Wayland fd is always writable and will busy-loop.
The dispatch function gets called with 0-mask when we need to flush
display anyway, so this saves CPU at no visible impact.
The previous pixel format (RGBA8888) is not supported on all devices for cursors.
Weston uses ARGB8888 exclusively for its cursor buffer object which leads me to
believe this pixel format is better supported.
The gbm for the output might be null for the pageflip in the case that
the output has been disconnected. The gbm might be set to null by
wlr_drm_output_cleanup() in this case.
If the output is cleaned up before the pageflip, then a double free
will crash the compositor on the call to gbm_surface_release_buffer()
in the pageflip handler. The outputs buffer object bo[1] will point to
invalid memory.
sdilts
Ilia Bozhinov
Scott Anderson
Mariusz Bialonczyk
emersion
Drew DeVault
Markus Ongyerth
Guido Günther
Vincent Vanlaer
Dominique Martinet
Tobias Blass
morganamilo
Uli Schlachter
Tancredi Orlando
Tony Crisci
Cedric Sodhi
Scott Anderson
Dan Robertson
Rodrigo Lourenço
Patrick Steinhardt
Timidger
Johannes Schramm
PoroCYon
Björn Esser
Michael Weiss
n3rdopolis
Moritz
Greg V
Stefano Ragni
Eric Molitor
Versus Void
Heghedus Razvan
D.B
dudemanguy
Calvin Lee
nyorain
Drew DeVault