0c2a64df18
headless add_input_device: fix leak on error
...
Found through static analysis
2018-06-30 20:46:58 +09:00
e5348ad7d3
backend autocreate: fix leak when WLR_BACKENDS is set
...
Found through static analysis
2018-06-30 11:45:57 +09:00
1940c6bbd9
wayland backend: fix width/height == 0 check
...
We cannot handle just one of the two being NULL later down the road
(e.g. divide by zero in matrix projection code),
just ignore any such configure request.
Found through static analysis
2018-06-30 11:38:21 +09:00
266898ca1f
direct session backend: fix closing -1 on error
...
Found through static analysis
2018-06-30 11:38:21 +09:00
bcc2c64c1e
x11 backend init: fix leak on failed XOpenDisplay
...
Found through static analysis
2018-06-30 11:38:21 +09:00
4f7b1382d4
wayland backend seat: fix NULL output check
...
The test was done after dereferencing output in pointer_handle_enter,
just move it up one line.
No reason pointer_handle_leave would not need the check if enter needs
it, add it there.
Found through static analysis.
2018-06-30 11:38:21 +09:00
f0d455f088
drm backend: overflow fixes
...
These operations are done in 32-bit arithmetics before being casted to 64-bit,
thus can overflow before the cast.
Casting early fixes the issue.
Found through static analysis
2018-06-30 11:21:22 +09:00
e459fe0ec7
Merge pull request #992 from emersion/screencontent
...
Implement wlr_export_dmabuf_unstable_v1 protocol
2018-06-22 05:37:07 -07:00
482fc48c74
FIX: Suprocess loops endlessly when the control socket closes.
...
recvmsg(3) returns 0 if the connection partner has shut down its socket.
The communicate function considered 0 a successful message, though, and
keeps calling recvmsg(3) again and again.
2018-06-20 22:00:45 +02:00
57548b557a
Merge branch 'master' into screencontent
2018-06-17 14:49:18 +01:00
964e0a50be
Check for seat0 properly
2018-06-14 21:02:32 +12:00
47985d2dc5
Multiseat fixes
2018-06-14 20:46:16 +12:00
551700e887
backend/wayland: fix keyboard keys not pressed/released when focus changes
2018-06-03 13:18:57 +01:00
21928cbe61
Merge branch 'master' into screencontent
2018-05-31 12:33:27 +01:00
28020ff577
Only allow one modifier per DMA-BUF, split attributes struct in render/
2018-05-30 09:29:12 +01:00
bd430b8620
backend/drm: support multi-planar DMA-BUFs when exporting
2018-05-29 18:47:17 +01:00
9e26808c28
output, backend/drm: add wlr_output_export_dmabuf
2018-05-29 18:45:45 +01:00
79683ee497
backend/drm: better connector cleanup, add more logs
2018-05-27 13:21:41 +01:00
6eb4b5b54d
Merge pull request #993 from emersion/bind-wl-drm-in-renderer
...
render: bind wl_drm in renderer
2018-05-25 13:54:16 +01:00
24cf70ae96
backends: implement custom EGL and renderer initialization
...
Compositors now have more control over how the backend creates its
renderer. Currently all backends create an EGL/GLES2 renderer, so
the necessary attributes for creating the context are passed to a
user-provided callback function. It is responsible for initializing
provided wlr_egl and to return a renderer. On fail, return 0.
Fixes #987
2018-05-25 14:56:52 +03:00
41130fe54b
render: bind wl_drm in renderer
2018-05-21 19:07:08 +01:00
9e3dd6b560
backend/wayland: fix segfault when destroying backend before starting it
2018-05-19 09:34:16 +01:00
75b10cd621
backend: support creating DRM and libinput via WLR_BACKENDS
2018-05-19 09:32:08 +01:00
007d83c6ee
backend: allow multiple backends in WLR_BACKENDS
2018-05-19 09:09:03 +01:00
52bd8aa716
backend/multi: disallow multiple renderers at the same time
2018-05-19 09:09:03 +01:00
a1631dd9ee
backend: add WLR_BACKEND env variable
2018-05-19 09:08:59 +01:00
6a46fcc6f2
recalculate cursor projection matrix on set_cursor
...
Updates the projection matrix for the cursor plane in the DRM backend,
when the cursor is set, so new cursor are uploaded with the correct
transformation.
2018-05-16 15:44:41 +02:00
198ad27bd5
backend/wayland: print output name in window title
2018-05-15 00:16:18 +01:00
0b58579564
Add support for discrete axis values
2018-05-12 13:34:58 +01:00
13098a18ea
Fix hardware cursors scale & transform
2018-05-09 19:58:18 +01:00
caf9f9022c
Merge pull request #936 from emersion/full-hardware-cursors
...
output: always use hardware cursors if available
2018-05-04 19:00:45 +01:00
6305e6327f
Fix typos in comments and strings
2018-05-03 21:59:43 +01:00
1637053ef8
drm: only disable atomic modesetting when WLR_DRM_NO_ATOMIC == 1
...
Don't allow any value of the env var to disable atomic mode setting.
2018-05-03 15:37:37 +02:00
545d54439d
backend/wayland: don't transform pointer events
...
We do this in a backend independent way in wlr_cursor now.
2018-05-03 11:09:14 +02:00
6f01c12b40
backend/x11: don't transform pointer events
...
We do this in a backend independent way in wlr_cursor now.
2018-05-03 11:09:14 +02:00
225d182765
output: always use hardware cursors if available
...
This changes the `wlr_output_impl.set_cursor` function to take a
`wlr_texture` instead of a byte buffer. This simplifies the
DRM and Wayland backends since they were creating textures from
the byte buffer anyway.
With this commit, performance should be improved when moving the
cursor since outputs don't need to be re-rendered anymore.
2018-05-01 21:38:04 +01:00
178ac8bffe
backend/{wayland,x11}: fix pointer coords for transformed outputs
2018-04-30 10:48:35 +01:00
62d7337d00
backend/x11: add one pointer per output
2018-04-29 14:46:29 +01:00
ddac792b61
backend/wayland: only set one pointer listener
2018-04-29 14:30:13 +01:00
9f8a7c8fc4
backend/wayland: create one virtual pointer per output
2018-04-29 14:30:13 +01:00
2551ef8871
input-device: add output_name field, populate it from libinput
2018-04-29 14:30:09 +01:00
f8e0a03451
backend/x11: correctly destroy input devices
2018-04-28 12:55:36 +01:00
79da4c175e
backend/headless: remove useless destructor
2018-04-28 12:48:05 +01:00
57c36ddcb3
backend/wayland: add proper error handling to wlr_wl_backend_create
2018-04-28 12:38:03 +01:00
fecb971518
Merge pull request #902 from emersion/various-memory-leaks
...
Various memory leaks
2018-04-26 11:34:49 +02:00
cd9f25711c
backend: destroy renderer when destroying backend
2018-04-25 23:53:43 +01:00
625a7a48dc
Don't use the wlr_ prefix for static functions
2018-04-25 23:51:00 +01:00
71ca45e2c0
Make sure we don't use others' prefixes
2018-04-25 23:24:58 +01:00
b0d99f5c67
Remove wlr_ prefix from local symbols
2018-04-25 23:00:46 +01:00
018b82c01e
render/egl: allow passing NULL to surface and image destructors
2018-04-25 08:28:48 +01:00
eaed6bd03b
render/egl: add wlr_egl_destroy_surface
2018-04-24 23:44:43 +01:00
dbdc63ddde
Merge pull request #873 from emersion/output-dont-emit-mode-twice
...
output: don't emit the mode event if it hasn't changed
2018-04-17 21:08:27 -04:00
94fa6c88f4
output: don't emit the mode event if it hasn't changed
...
This also fixes #535 .
2018-04-18 00:15:25 +01:00
e5ab12339f
x11 backend: Expose events mean "needs swap"
...
When the X11 server sends an expose event, that means that "this
rectangle here (the event contains x,y,width,height) has undefined
contents on your window; please redraw that". This means that we need a
swap. However, so far the code does not actually enforce that a swap
happens.
For example, start rootston, switch to another workspace and then switch
back. The rootston window will not be redrawn (before commit
52b058c2a3e79d924588e79d924588
2018-04-15 11:41:09 +02:00
e79d924588
x11 backend: Ignore expose if frame is pending
...
When resizing rootston with the mouse, the result is really slow. One
can see that rootston needs quite a while for drawing the newly visible
area. This is because every single expose event is handled on its own
and causes (apparently) a full repaint or at least a swap.
This commit improves things by only causing a new frame if none is
pending already.
With this change, there is almost no delay in rootston drawing the newly
visible area.
Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 11:07:31 +02:00
52b058c2a3
x11 backend: Do not set a back pixel on windows
...
Before this commit, the x11 server would fill any exposed area with
white before the wlroots x11 backend got a chance to do anything. This
was e.g. visible when running rootston and resizing the window: When the
window becomes larger, the new area is filled with black.
By just not setting a back pixel value, this commit gets rid of this
behaviour.
Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 11:07:31 +02:00
98f8ec6a08
x11_handle_input_event: Remove return value
...
handle_x11_event() and x11_handle_input_event() react to different kinds
of events, so it does not make much of a difference if
x11_handle_input_event() signals if it handled an event or not.
Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 10:33:53 +02:00
3728abd1fc
handle_x11_event: Remove return value
...
This function always returns "false", so its return type can simply be
changed to void.
Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-04-15 10:32:30 +02:00
d2ebbd103c
backend: remove wlr_backend_get_egl
2018-04-08 11:00:56 -04:00
03563b61a8
backend/{x11,headless}: use default if supplied refresh is invalid
2018-04-05 22:48:00 -04:00
68ad7e5092
Add ifdef to build without X11
2018-04-04 19:59:47 +02:00
2d6bbf12f8
backend/{x11,headless}: fix refresh rate
2018-04-03 22:54:01 -04:00
2ecce27dd5
Merge pull request #807 from swaywm/input-inhibit
...
Input inhibit
2018-04-03 15:58:47 -04:00
56deff41b6
Implement input inhibit in rootston
2018-04-03 15:09:53 -04:00
9609985f29
backend/x11: fix cursor position when receiving configure event
2018-04-03 13:32:24 -04:00
60f07ee321
backend/x11: fix WLR_HAS_XCB_XKB always undefined
2018-04-03 13:12:52 -04:00
8b37e8f67a
Merge pull request #792 from emersion/x11-backend-blank-cursor
...
backend/x11: hide cursor
2018-04-02 10:21:07 -04:00
b60e31e5c0
Merge pull request #794 from emersion/renderer-untie-backend
...
Untie wlr_backend from wlr_renderer
2018-03-31 21:31:15 -04:00
a2391a6047
Fix cursor transform on DRM backend
2018-03-31 20:55:31 -04:00
33a2eb4b77
Untie wlr_backend from wlr_renderer
2018-03-31 18:49:43 -04:00
37aae0b2cd
backend/x11: flush after destroying window
...
Otherwise the destroy message is kept buffered and never reaches
the X11 server. Thanks X11.
2018-03-31 13:28:50 -04:00
7b88ace557
backend/x11: hide cursor
2018-03-31 12:10:43 -04:00
5111f7df84
backend/x11: fix extra output
2018-03-30 23:51:20 -04:00
f37e8c5b6e
backend/wayland: cleanup input transform code
2018-03-30 23:51:20 -04:00
aa6ae710f7
backend/x11: fix input events
2018-03-30 23:51:19 -04:00
0a7a8cbd1c
backend/x11: add WLR_X11_OUTPUTS support
2018-03-30 23:51:19 -04:00
d4f7ced6e2
backend/x11: refactor, prepare support for multiple outputs
2018-03-30 23:51:16 -04:00
5dd022da13
Merge pull request #765 from swaywm/transformed-events
...
Use libinput transformed events instead of width_mm/height_mm
2018-03-28 14:11:39 -04:00
3813121fef
Fix wayland output absolute input handling
2018-03-28 14:04:23 -04:00
52d621e097
Merge pull request #763 from emersion/x11-backend-kbd-modifiers
...
backend/x11: correctly update keyboard modifiers
2018-03-28 12:51:08 -04:00
ac219cbda6
Remove width_mm from tablet events
2018-03-28 12:05:37 -04:00
324b9d910d
Remove width_mm from wlr_touch events
2018-03-28 11:04:40 -04:00
a35a5786b0
Remove width_mm from wlr_pointer events
2018-03-28 10:46:50 -04:00
f033f717a2
backend/x11: make xcb-xkb optional, remove global state
2018-03-28 00:26:15 -04:00
330ee08126
Merge pull request #744 from emersion/texture-redesign
...
Redesign wlr_texture
2018-03-28 00:14:57 -04:00
8d1b5c7600
backend/x11: correctly update keyboard modifiers
2018-03-28 00:04:32 -04:00
a0b52a0dff
Fix x11 backend
...
Need to include wlr/config.h before using the various WLR_HAS_xxx defines
2018-03-27 09:20:21 +02:00
b1c4f01bad
Merge pull request #713 from ManDay/master
...
Make X11 fully optional
2018-03-26 23:20:46 -04:00
706f77e3c7
Address review feedback
2018-03-26 23:15:21 -04:00
adf4fb08dd
Merge branch 'master' into texture-redesign
2018-03-26 19:13:13 -04:00
3bda7e2ef8
Use DRM_FORMAT_MOD_LINEAR instead of a hardcoded constant
2018-03-26 12:00:08 -04:00
c7f8b28d8d
Fix use-after-free in x11 backend during shutdown
...
The xcb_connection_t instance that is used here comes from
XGetXCBConnection(), is created by XOpenDisplay(), and is owned by the
returned Display*. Calling xcb_disconnect() directly on it leads to
various use-after-frees during shutdown, as reported by valgrind. The
first one of the about 30 errors is:
Invalid read of size 4
at 0x71F2051: xcb_take_socket (in /usr/lib64/libxcb.so.1.1.0)
by 0x78551DD: ??? (in /usr/lib64/libX11.so.6.3.0)
by 0x7855A14: _XFlush (in /usr/lib64/libX11.so.6.3.0)
by 0x7858504: _XGetRequest (in /usr/lib64/libX11.so.6.3.0)
by 0x7838966: XFreeGC (in /usr/lib64/libX11.so.6.3.0)
by 0x783238B: XCloseDisplay (in /usr/lib64/libX11.so.6.3.0)
by 0x4E680C2: wlr_x11_backend_destroy (backend.c:333)
by 0x4E57E94: wlr_backend_destroy (backend.c:39)
by 0x4E629FB: multi_backend_destroy (backend.c:47)
by 0x4E62B5A: handle_display_destroy (backend.c:90)
by 0x50B7E9F: ??? (in /usr/lib64/libwayland-server.so.0.1.0)
by 0x50B8476: wl_display_destroy (in /usr/lib64/libwayland-server.so.0.1.0)
Address 0xc14dda0 is 0 bytes inside a block of size 21,152 free'd
at 0x4C2DD18: free (vg_replace_malloc.c:530)
by 0x4E680A5: wlr_x11_backend_destroy (backend.c:330)
by 0x4E57E94: wlr_backend_destroy (backend.c:39)
by 0x4E629FB: multi_backend_destroy (backend.c:47)
by 0x4E62B5A: handle_display_destroy (backend.c:90)
by 0x50B7E9F: ??? (in /usr/lib64/libwayland-server.so.0.1.0)
by 0x50B8476: wl_display_destroy (in /usr/lib64/libwayland-server.so.0.1.0)
by 0x40C54E: main (main.c:84)
Block was alloc'd at
at 0x4C2EA1E: calloc (vg_replace_malloc.c:711)
by 0x71F0C60: xcb_connect_to_fd (in /usr/lib64/libxcb.so.1.1.0)
by 0x71F4BD4: xcb_connect_to_display_with_auth_info (in /usr/lib64/libxcb.so.1.1.0)
by 0x7854AA1: _XConnectXCB (in /usr/lib64/libX11.so.6.3.0)
by 0x7845481: XOpenDisplay (in /usr/lib64/libX11.so.6.3.0)
by 0x4E681B6: wlr_x11_backend_create (backend.c:376)
by 0x4E580EE: wlr_backend_autocreate (backend.c:99)
by 0x40C27D: main (main.c:35)
Normally, one would expect this to crash during XCloseDisplay() when
xcb_disconnect() is called again and frees the same data again (glibc would
detect a double free). However, XCloseDisplay() tries to clean up some internal
caches first for which it has to send requests to the X11 server (e.g. the
XFreeGC() above). This fails since the file descriptor was already closed,
which causes an IO error. Xlib's _XDefaultIOError() handles this by printing an
error message and calling exit(1).
Thus, the only symptom of this problem was compositors exiting
mid-shutdown and printing an error message:
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 6 requests (6 known processed) with 0 events remaining.
Fixes: https://github.com/swaywm/wlroots/issues/745
Signed-off-by: Uli Schlachter <psychon@znc.in>
2018-03-26 10:48:30 +02:00
c63d94483b
Redesign wlr_texture
...
- Textures are now immutable (apart from those created from raw
pixels), no more invalid textures
- Move all wl_drm stuff in wlr_renderer
- Most of wlr_texture fields are now private
- Remove some duplicated DMA-BUF code in the DRM backend
- Add more assertions
- Stride is now always given as bytes rather than pixels
- Drop wl_shm functions
Fun fact: this patch has been written 10,000 meters up in the air.
2018-03-24 23:48:32 -04:00
51141dd11e
Minor corrections
2018-03-23 10:28:36 +01:00
a854c2f246
Merge branch 'master' into gles2-renderer-redesign
2018-03-23 00:55:55 +01:00
ef3769851f
Merge pull request #740 from emersion/egl-debug
...
render/egl: use EGL_KHR_debug
2018-03-22 18:54:21 -04:00
d5e14ab247
wayland backend: fix use-after free on output destroy
...
==12021==ERROR: AddressSanitizer: heap-use-after-free on address 0x617000015698 at pc 0x7f1a9abe1c09 bp 0x7ffe9068f6b0 sp 0x7ffe9068f6a0
WRITE of size 4 at 0x617000015698 thread T0
#0 0x7f1a9abe1c08 in pointer_handle_leave ../backend/wayland/wl_seat.c:40
#1 0x7f1a96ae7d1d in ffi_call_unix64 (/lib64/libffi.so.6+0x5d1d)
#2 0x7f1a96ae768e in ffi_call (/lib64/libffi.so.6+0x568e)
#3 0x7f1a988e0d8a (/lib64/libwayland-client.so.0+0x8d8a)
#4 0x7f1a988dd927 (/lib64/libwayland-client.so.0+0x5927)
#5 0x7f1a988debe3 in wl_display_dispatch_queue_pending (/lib64/libwayland-client.so.0+0x6be3)
#6 0x7f1a9abdd6d6 in dispatch_events ../backend/wayland/backend.c:28
#7 0x7f1a9a968c11 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0x9c11)
#8 0x7f1a9a967449 in wl_display_run (/lib64/libwayland-server.so.0+0x8449)
#9 0x418dff in main ../rootston/main.c:81
#10 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
#11 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
0x617000015698 is located 664 bytes inside of 696-byte region [0x617000015400,0x6170000156b8)
freed by thread T0 here:
#0 0x7f1a9af754b8 in __interceptor_free (/lib64/libasan.so.4+0xde4b8)
#1 0x7f1a9abe01ee in wlr_wl_output_destroy ../backend/wayland/output.c:194
#2 0x7f1a9ac12918 in wlr_output_destroy ../types/wlr_output.c:299
#3 0x7f1a9abe061b in xdg_toplevel_handle_close ../backend/wayland/output.c:255
#4 0x7f1a96ae7d1d in ffi_call_unix64 (/lib64/libffi.so.6+0x5d1d)
#5 0x7f1a96ae768e in ffi_call (/lib64/libffi.so.6+0x568e)
#6 0x7f1a988e0d8a (/lib64/libwayland-client.so.0+0x8d8a)
#7 0x7f1a988dd927 (/lib64/libwayland-client.so.0+0x5927)
#8 0x7f1a988debe3 in wl_display_dispatch_queue_pending (/lib64/libwayland-client.so.0+0x6be3)
#9 0x7f1a9abdd6d6 in dispatch_events ../backend/wayland/backend.c:28
#10 0x7f1a9a968c11 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0x9c11)
#11 0x7f1a9a967449 in wl_display_run (/lib64/libwayland-server.so.0+0x8449)
#12 0x418dff in main ../rootston/main.c:81
#13 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
#14 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
previously allocated by thread T0 here:
#0 0x7f1a9af75a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f1a9abe0703 in wlr_wl_output_create ../backend/wayland/output.c:272
#2 0x7f1a9abdd8eb in wlr_wl_backend_start ../backend/wayland/backend.c:55
#3 0x7f1a9abbeb49 in wlr_backend_start ../backend/backend.c:28
#4 0x7f1a9abd8ce1 in multi_backend_start ../backend/multi/backend.c:24
#5 0x7f1a9abbeb49 in wlr_backend_start ../backend/backend.c:28
#6 0x418c32 in main ../rootston/main.c:58
#7 0x7f1a99b5ef29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
#8 0x4057c9 in _start (/home/shared/wayland/wlroots/build/rootston/rootston+0x4057c9)
2018-03-22 21:27:49 +01:00
b0c2bbebd1
x11 backend: fix various leaks
...
- xcb_query_pointer_reply return value needs to be freed
- call XCloseDisplay
- remove wl event_source
2018-03-22 21:25:41 +01:00
60bfe0a6aa
backend/drm: remove remaining raw GL call
...
This makes the hardware cursor code a less efficient. Can be
fixed with a GLES3 renderer.
2018-03-21 11:34:08 +01:00
b1f93bc5cc
render/egl: use EGL_KHR_debug
2018-03-21 10:42:43 +01:00
3581573bdc
render/gles2: make wlr_renderer_begin take viewport size
...
This allows raw GL calls outside wlr_renderer to be removed.
2018-03-21 07:37:09 +01:00
c41de2d1be
render: split render.h into wlr_renderer.h and wlr_texture.h
2018-03-19 23:16:29 +01:00
6227da96b1
backend/drm: don't hardcode matrix
2018-03-18 11:34:23 +01:00
7894fca224
matrix: rename wlr_matrix_texture to wlr_matrix_projection
2018-03-15 21:26:45 +01:00
876f07e9f1
renderer: replace wlr_texture_get_matrix by wlr_render_texture
2018-03-15 19:31:02 +01:00
824a95ad19
matrix: use 2D matrices
2018-03-15 15:33:58 +01:00
d26b67cb06
matrix: unify API, don't use array pointers
2018-03-15 11:10:56 +01:00
b6a3f240c7
matrix: move to types/
2018-03-15 09:11:27 +01:00
efa9eeb5d5
Merge pull request #716 from emersion/fix-cursor-hotspot-update
...
Fix cursor hotspot update
2018-03-12 21:50:07 -04:00
d24f868bbe
backend/drm: fix cursor hotspot not updated
2018-03-12 19:34:43 +01:00
7cdad5cde4
Merge pull request #710 from emersion/dont-move-hidden-cursors
...
output: don't move hidden cursors
2018-03-12 14:25:20 +01:00
92ca4ad474
backend/drm: refactor wlr_drm_connector_set_cursor
2018-03-11 11:40:03 +01:00
ebdabc2030
Make X11 fully optional
...
Make X11 Backend (in addition to XWayland) optional and small bug fix on XWayland includes.
2018-03-09 15:17:15 +01:00
bfc0e95d2c
Add mode support to libinput backend
...
And extend tablet example with tilt and ring support
2018-03-07 20:57:55 -05:00
3c9fc7c68e
Add const to x11 and input interfaces
2018-03-06 21:16:18 +13:00
902d6cc240
Use xcb atoms properly
2018-03-06 21:15:47 +13:00
2cea430488
prevent current_mode null on output_enable(false)
...
The current mode was set to NULL to abuse it as state variable
persisting DRM suspend/resume, this results resulted in a segfault on
normal DPMS cycle.
This reverts that change and uses the wlr_output enabled variable, which
also persists and makes more sense.
2018-03-01 15:48:25 +01:00
a65ef8ea86
restore dpms state on drm resume
...
If there is no current mode, set outputs to dpms off in drm resume.
Sets current mode to null on disable to ensure this can be checked.
2018-02-26 18:12:51 +01:00
3296365ce5
Merge pull request #659 from agx/alpha
...
Make wlr_render_with_matrix use alpha
2018-02-25 13:16:35 -05:00
d08792bfff
Add alpha to wlr_render_with_matrix
...
so we can use the alpha channel to e.g. blend in textures
2018-02-25 13:47:48 +01:00
7da653bbb4
Merge pull request #669 from acrisci/headless-output-frame-timer
...
destroy frame timer in headless output
2018-02-25 00:26:32 -05:00
721e4ec55f
remove frame timer from headless output
2018-02-24 22:32:57 -05:00
99e6cba3c3
Fix null deref in wlr_libinput_backend_destroy
...
If input_event is null (e.g. if backend_start has not been called yet)
wl_event_source_remove will result in a null deref.
2018-02-25 02:26:56 +00:00
94d53d53f9
Merge pull request #657 from emersion/wl-backend-uninitialized-field
...
backend/wayland: fix uninitialized wlr_event_keyboard_key::update_state
2018-02-24 10:14:22 -05:00
9716aa9b92
x11: parse vendor and model out of xcb setup information
2018-02-23 09:52:56 +01:00
11e5f0bac8
backend/wayland: fix uninitialized wlr_event_keyboard_key::update_state
2018-02-23 09:40:31 +01:00
1d9be89e2d
Revert "ELF Visibility"
2018-02-19 18:01:27 -05:00
868ad5af69
Merge pull request #647 from ascent12/elf_visibility
...
ELF Visibility
2018-02-18 21:49:23 -05:00
86269052eb
Explicitly export EFL symbols
2018-02-19 14:26:40 +13:00
15afef6cbc
x11 backend: set window title
...
This makes windows identifiable in the window list
2018-02-18 23:42:04 +01:00
f27c0b44b8
Remove usec_to_msec from public API
2018-02-19 10:43:25 +13:00
168e26489a
Add missing dependencies
2018-02-14 18:42:39 +00:00
c2e1474010
Reformat all #include directives
2018-02-12 21:29:23 +01:00
36ead80cd1
Make wlr_signal_emit_safe private
2018-02-12 19:52:47 +01:00
10ecf871f2
Remove wlr_backend.events.{output_remove,device_remove}
2018-02-12 10:36:43 +01:00
5e58d46cc1
Add wlr_signal_emit_safe
2018-02-12 09:12:31 +01:00
664d7bfe4e
Merge pull request #618 from VincentVanlaer/atomic-gamma
...
Add atomic gamma control
2018-02-10 09:51:09 -05:00
8fc7edd636
Merge pull request #623 from martinetd/mesonopt
...
Meson option enhancements
2018-02-10 09:49:13 -05:00
435aec0033
meson build: only link with deps when required by options
2018-02-10 11:30:47 +01:00
19d7edb430
meson.build status: print actual build options in message
...
We were printing the option intent (true by default for all), but
some are disabled when a component is not found and this was not
reflected.
2018-02-10 10:44:42 +01:00
7cb828ac70
Fallback gamma on legacy if properties don't exist
2018-02-10 10:24:49 +01:00
bf6d245400
Swap buffers with damage
2018-02-09 22:54:14 +01:00
dd69d7b764
Use VLA instead of heap alloc
2018-02-09 19:37:01 +01:00
0232269a2d
Fix style
2018-02-09 19:35:44 +01:00
b2f6941617
Free gamma when property blob creation fails
2018-02-09 18:54:56 +01:00
2df97ed16a
Set needs_swap on output when gamma changes
2018-02-09 17:29:14 +01:00
f5e5d1983b
Do not allow gamma control without a crtc
2018-02-09 17:29:14 +01:00
ab011406ad
Add atomic gamma lut size fetching
...
Legacy gamma lut size now uses the new legacy_crtc member of
wlr_drm_crtc. This was Previously doen using old_crtc in
wlr_drm_connector, but since this refers to the crtc that was connected to
the ouput, this could give the wrong result.
2018-02-09 17:29:14 +01:00
cc1229e75e
Add atomic gamma setting
2018-02-09 17:29:04 +01:00
cdd55b5d19
Merge remote-tracking branch 'upstream/master' into output-damage
2018-02-09 14:50:26 +01:00
08fda567d2
prevents reuse of outdated wlr_output state
...
On the drm output the wlr_drm_connector structs are reused.
This struct contains the wlr_output struct, which is reused as well.
The old code kept modes/edid and output state persistent over hotplug.
This nulls the relevant strings, reads newer edid data and removes old
modes on unplug.
2018-02-06 22:45:37 +01:00
3d3ea32137
Merge remote-tracking branch 'upstream/master' into output-damage
2018-02-03 00:15:44 +01:00
bb39277e97
backend/drm: update output enabled property on modeset
2018-02-02 22:28:08 +01:00
bb4aeb3b2f
backend/drm: support updating cursor when session is paused
2018-02-02 21:01:59 +01:00
babdd6ccf7
backend: fix use-after-free when destroying backends
...
The backend destroy signal is emitted before the output_remove
signal is. When the destroy signal is emitted listeners remove
their output_remove listener, so the output_remove signal is never
received and listeners have an invalid output pointer.
The correct way to solve this would be to remove the output_remove
signal completely and use the wlr_output.events.destroy signal
instead. This isn't yet possible because wl_signal_emit is unsafe
and listeners cannot be removed in listeners.
2018-01-30 19:45:57 +01:00
c5aac77692
Fix some typos
...
Prefer initialize over initialise since used more often in the sources.
2018-01-30 16:10:07 +01:00
704130cc11
output: fix performance issues with wlr_output_schedule_frame
2018-01-30 14:45:02 +01:00
f152fdb4c5
Merge pull request #594 from Ongy/drm-surface-buffers
...
relases gbm buffers on init
2018-01-30 11:04:01 +01:00
d498855b9d
backend/drm: fix hw cursor position on rotated and scaled outputs
...
output: add wlr_output_transformed_resolution
2018-01-30 10:23:35 +01:00
51c22d39a4
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-29 23:24:09 +01:00
ed5b1fdedd
Merge pull request #580 from emersion/screenshooter-renderer-backport
...
Backport screenshooter fixes from the renderer redesign v1
2018-01-29 17:13:23 -05:00
cde0f454b3
Clean up the gbm/egl as well
2018-01-29 11:49:31 +01:00
2cdb646531
relases gbm buffers on init
...
The wlr_drm_surface_init function is called (upon others) when the drm
mode is changed.
When the surface was used previously this replaced the gbm_surface, but
did not replace the gbm buffers (front/back).
With this, wlr_drm_surface_get_from never set up the new buffers with
the new glViewport because surf->front existed.
This frees the buffers to get new buffers on the new surface with the
new viewport.
2018-01-29 11:29:54 +01:00
b47e8c4a1d
backend/drm: do not retry pageflip when swapping buffers
2018-01-28 23:33:38 +01:00
20e6861021
Do not flush damage if swapping buffers failed
...
This should solve issues with multiple outputs on DRM backend.
2018-01-28 22:39:24 +01:00
1ee61dbd0f
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-28 21:22:50 +01:00
41ec686693
meson: add systemd/elogind backends only if enabled
...
Right now, we are adding systemd and elogind backends to the build
system as soon as their libraries are found on the build system.
Instead, we should only add them if the libraries have been found _and_
the user has actually requested them to be included.
2018-01-28 16:14:38 +00:00
d7dfbd23fa
drm: Use ptrdiff_t instead of intmax_t in format string
...
since we're looking at pointer differences.
Otherwise the build fails on arm like
In file included from ../backend/drm/drm.c:19:0:
../include/wlr/util/log.h:34:17: error: format '%jd' expects argument of type 'intmax_t', but argument 7 has type 'int' [-Werror=format=]
_wlr_log(verb, "[%s:%d] " fmt, _strip_path(__FILE__), __LINE__, ##__VA_ARGS__)
^
../backend/drm/drm.c:462:2: note: in expansion of macro 'wlr_log'
wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
^~~~~~~
../backend/drm/drm.c:462:39: note: format string is defined here
wlr_log(L_DEBUG, "%s: crtc=%ju ovr=%jd pri=%jd cur=%jd", conn->output.name,
~~^
%d
2018-01-27 12:29:56 +01:00
7adf13e284
Fix flickering when switching VT
2018-01-27 11:16:42 +01:00
8d58ed502b
output: add wlr_output_schedule_frame
2018-01-26 22:39:23 +01:00
ece2c1e4e2
Damage tracking for transformed outputs
2018-01-26 22:11:09 +01:00
72507f9820
Clean up session signal handler on drm init fail
2018-01-24 18:27:53 +01:00
4fa90b0511
Backport screenshooter fixes from the renderer redesign v1
...
This backports some changes to #319 to fix the screenshooter data
format. This also adds wlr_backend_get_renderer which will be
useful to support multiple renderers.
2018-01-23 22:06:54 +01:00
59c53e8333
Merge remote-tracking branch 'upstream/master' into output-damage
2018-01-21 22:18:06 +01:00
f8b9f44ff5
Add con/crtc null check to move_cursor in drm
2018-01-21 15:47:02 -05:00
9d4ea146b6
Added crtc null check for other drm funcs
2018-01-21 15:37:23 -05:00
4478cf1ddc
Fixes #575
2018-01-21 14:57:24 -05:00
e37ebf6869
style: add comment to empty while loop in logind.c
2018-01-21 17:00:15 +01:00
dcc743047b
style: include brackets for if/while/for, even if it's a single statement
2018-01-21 16:28:21 +01:00
0365b587f0
output: add damage tracking via buffer age
2018-01-21 00:06:35 +01:00
78c13ead16
backend/x11: force rendering the whole output
2018-01-20 18:10:11 +01:00
4ca38b84ed
backend/drm: fix hardware cursors not moving
...
This adds back `wlr_output::needs_swap`. This allows a backend to
request buffer swaps even if the output isn't damaged. This is
needed by the DRM backend to trigger pageflips when the cursor
moves.
2018-01-20 16:43:14 +01:00
584f06ad2f
backend/drm: do not try a pageflip is another one is in pending
2018-01-19 23:46:40 +01:00
f0f97280a0
backend/drm: fix retry pageflip
2018-01-19 23:35:23 +01:00
bde255933e
output: add wlr_output::damage, fixes #572
2018-01-18 19:47:21 +01:00
6fa0a91ee2
backend/wayland: fix segfault in wlr_wl_output_destroy
2018-01-18 13:06:57 +01:00
b331c5c2c5
Merge pull request #549 from emersion/output-enabled
...
Add wlr_output::enabled
2018-01-15 20:53:13 -05:00
0eebaf98d0
drm: do not pageflip when enabling output
2018-01-15 21:49:37 +01:00
3101c300b1
Don't crash if crtc->cursor is NULL
...
Same as what atomic_crtc_set_cursor does
Core was generated by `_build/rootston/rootston'.
Program terminated with signal SIGSEGV, Segmentation fault.
0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
170 if (!crtc || !crtc->cursor) {
(gdb) bt
0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170
1 0xb6f2a856 in wlr_drm_connector_move_cursor (output=0x2242b28, x=0, y=0) at ../backend/drm/drm.c:634
2 0xb6f3cea0 in wlr_output_cursor_set_image (cursor=0x21a0338, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4) at ../types/wlr_output.c:516
3 0xb6f39da2 in wlr_cursor_set_image (cur=0x22cfc90, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4, scale=1) at ../types/wlr_cursor.c:310
4 0xb6f44d2a in wlr_xcursor_manager_set_cursor_image (manager=0x22cfd10, name=0x434420 "left_ptr", cursor=0x22cfc90) at ../types/wlr_xcursor_manager.c:80
5 0x00431c0a in roots_seat_configure_xcursor (seat=0x22cef08) at ../rootston/seat.c:515
6 0x0043137c in roots_seat_init_cursor (seat=0x22cef08) at ../rootston/seat.c:210
7 0x004315ec in roots_seat_create (input=0x218d220, name=0x434594 "seat0") at ../rootston/seat.c:289
8 0x0042ecba in input_get_seat (input=0x218d220, name=0x434594 "seat0") at ../rootston/input.c:39
9 0x0042ed04 in input_add_notify (listener=0x218d228, data=0x218d3b0) at ../rootston/input.c:54
10 0xb6f2f2e6 in wl_signal_emit (signal=0x1ea548c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
11 0xb6f2f572 in input_add_reemit (listener=0x1ea9990, data=0x218d3b0) at ../backend/multi/backend.c:101
12 0xb6f2db7e in wl_signal_emit (signal=0x1ea992c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387
13 0xb6f2ddaa in handle_device_added (backend=0x1ea9920, libinput_dev=0x2292598) at ../backend/libinput/events.c:87
14 0xb6f2e164 in wlr_libinput_event (backend=0x1ea9920, event=0x2292b78) at ../backend/libinput/events.c:198
15 0xb6f2d678 in wlr_libinput_readable (fd=23, mask=1, _backend=0x1ea9920) at ../backend/libinput/backend.c:28
16 0xb6f2d7c0 in wlr_libinput_backend_start (_backend=0x1ea9920) at ../backend/libinput/backend.c:74
17 0xb6f27170 in wlr_backend_start (backend=0x1ea9920) at ../backend/backend.c:30
18 0xb6f2f320 in multi_backend_start (wlr_backend=0x1ea5480) at ../backend/multi/backend.c:22
19 0xb6f27170 in wlr_backend_start (backend=0x1ea5480) at ../backend/backend.c:30
20 0x0042fbc6 in main (argc=1, argv=0xbe89dd04) at ../rootston/main.c:60
2018-01-15 13:37:53 +01:00
c00e9d1416
adds remote argument to wayland backend create
...
Add a remote display name argument to wlr_wl_backend_create.
If NULL is passed to the wayland backend at all times, creating a
wayland backend *after* the compositor was started up, would require
changing the WAYLAND_DISPLAY environment variable.
2018-01-13 21:20:15 +01:00
53ba9b4eec
Fix output enable in DRM backend
2018-01-07 00:28:21 +01:00
771263380c
Add wlr_output::enabled
2018-01-04 12:46:15 +01:00
7574e27c6a
fix build without systemd
2018-01-02 16:39:58 +01:00
1478ef3202
Remove display_destroy on multi-backend destroy
2017-12-28 10:54:30 -06:00
bb24895a2b
Merge pull request #533 from martinetd/wl_array_add
...
ENOMEM checks: consistently check wl_array_add return
2017-12-28 07:44:21 -08:00
8e24aaa3c6
style: fix sizeof() calls without parentheses
2017-12-28 16:28:19 +01:00
1e6566e6cd
Fixes for multiple outputs
...
* Fixes output positions in screenshots
* Fixes Wayland backend pointer events when output layout doesn't start at (0, 0)
2017-12-28 15:09:57 +01:00
ff13849624
config: Avoid clash with other config-headers
2017-12-27 17:13:58 +01:00
6c2242e66b
Merge pull request #522 from emersion/fix-drm-output-transform-cursor
...
Fix cursor on transformed output with DRM backend
2017-12-27 05:48:45 -05:00
57a09c8ca4
config: Put all defines into config.h
2017-12-26 18:51:27 +01:00
e737f65e38
Fix cursor on transformed output with DRM backend
2017-12-26 18:16:37 +01:00
e457967e3f
Add libdrm as a dependency of wlr_backend
...
Without this patch I'm getting the following build error when building
with Nix:
FAILED: backend/wlr_backend@sta/session_direct-ipc.c.o
In file included from ../backend/session/direct-ipc.c:20:0:
/nix/store/9ac27wk5vh47p28gladbdfafpidrx9rh-libdrm-2.4.88-dev/include/xf86drm.h:40:17: fatal error: drm.h: No such file or directory
#include <drm.h>
^
compilation terminated.
2017-12-23 22:49:41 +01:00
4cec7f54e2
only add first backend to multi autocreate
2017-12-21 18:38:58 -05:00
b4159c52d5
autocreate backend returns null instead of empty
2017-12-21 08:33:34 -05:00
d1dce19253
handle display destroy
2017-12-21 08:17:35 -05:00
6c8fd6017e
backend add and remove events
2017-12-20 05:54:41 -05:00
ee39dff1e7
rootston: handle backend creation failed
2017-12-20 05:51:23 -05:00
ca6a0ef1bb
always return multibakend from autocreate
2017-12-19 19:07:33 -05:00
58e69c9ce1
multibackend remove subbackend
2017-12-19 18:49:00 -05:00
6c75a184e7
subbackend state destroy
2017-12-19 18:40:27 -05:00
a937016e38
remove session from multibackend
2017-12-19 18:25:46 -05:00
4e804ef40f
add backend destroy event
2017-12-19 18:14:47 -05:00
fcd7062542
x11 backend: add wlr_input_device_is_x11
2017-12-19 20:40:36 +01:00
169bc9fa10
wl backend: add wlr_input_device_is_wl
2017-12-19 20:20:32 +01:00
d9eaca6c9f
headless backend: add wlr_output_is_headless
2017-12-19 20:17:47 +01:00
995383b049
headless backend: add wlr_input_device_is_headless
2017-12-19 20:16:12 +01:00
be95147385
drm backend: add wlr_output_is_drm
2017-12-19 20:13:49 +01:00
dabfe159de
wl backend: add wlr_output_is_wl
2017-12-19 20:13:49 +01:00
f83b16bc17
x11 backend: add wlr_output_is_x11
2017-12-19 20:13:49 +01:00
3e228b0b2a
libinput backend: add wlr_input_device_is_libinput
2017-12-19 20:13:49 +01:00
4a36ba4bdd
Destroy multi backend on display destroy
2017-12-19 18:28:47 +01:00
b5686355f3
add some input device cleanup to x11 backend
2017-12-18 15:54:49 -05:00
b99d1f4fcc
Refactor wlr_egl_init to accept config_attribs
2017-12-17 23:51:04 +01:00
bc5bdb7793
Add headless input devices
2017-12-17 18:49:20 +01:00
0256de0002
Add full refresh rate support to custom modes
2017-12-17 18:02:55 +01:00
b852fb9a2b
Minimal working headless output
2017-12-17 13:35:07 +01:00
3970264ccf
Initialize headless backend
2017-12-17 12:56:42 +01:00
51bbcc0fbf
Fix rootston input on HiDPI outputs in wayland backend
2017-12-15 16:28:04 +01:00
51db087210
Introduce fractional scaling
2017-12-15 01:00:03 +01:00
23fb663ea4
Merge pull request #453 from emersion/surface-transform
...
Add surface transforms support
2017-12-14 14:43:04 -05:00
466e86b7b2
Merge branch 'master' into surface-transform
2017-12-14 20:31:18 +01:00
75ef7860bb
Merge branch 'master' into display-destroy
2017-12-14 20:29:30 +01:00
a1302cc4a5
Fix pointer events with multiple outputs in wayland backend
2017-12-13 22:32:22 +01:00
257559d890
Remove output instead of terminating display when a wayland backend view closed
2017-12-13 21:48:59 +01:00
3b4b8953d9
Update output layout when scale or transform changes
2017-12-12 21:58:00 +01:00
c67a5824b8
Merge branch 'master' into display-destroy
2017-12-11 16:14:03 +01:00
529675b7b0
Add wlr_output_set_custom_mode
2017-12-11 12:14:23 +01:00
6001235b04
Listen to display destroy in session
...
It's not the backend's responsibility to destroy the session anymore.
2017-12-08 11:17:56 +01:00
18eb1eee3f
Listen to display destroy in xwayland, rename wlr_egl_free
2017-12-08 00:59:37 +01:00
9d43adaafa
Listen to display destroy in backends
2017-12-07 23:44:59 +01:00
91d72040e5
Configure outputs with make, model, serial in rootston
...
Added fallbacks in DRM backend in case EDID extension data for model and serial is missing.
Updates #403
2017-12-07 13:59:19 +01:00
8af779fae6
Fix segfault when moving hardware cursor
2017-12-05 22:23:01 +01:00
8a2d54c24a
Fix style and string comparison
2017-12-02 12:37:28 -05:00
a8d8a63fe0
Attempt to fix #454
...
With logind, only seat0 can use TTYs
2017-12-02 10:50:00 -05:00
6a69b4419f
Make wlr_output_transform_* functions public, refactoring
2017-12-01 09:15:33 +01:00
cef6d75491
Moved os-compatibility and added header
...
* Moved os-compatibility.c to util
* Added header under util
* Removed static since it isn't needed (i think so)
* Adjusted meson.build to include lib_wlr
Improved some codestyle
* Added guard to os-compatibility.h
* Fixed typo in include statment
Adjusted Guard
* Changed guard to _WLR_UTIL_OS_COMPATIBILITY
2017-11-30 18:01:13 +01:00
bc113c16aa
Use correct include path for glapi.h
2017-11-30 10:32:55 +13:00
57a304c750
Merge pull request #447 from ascent12/os-compat
...
Remove unneeded linux include
2017-11-26 18:18:12 -05:00
87ea76e037
Remove unneeded linux include
2017-11-27 12:15:38 +13:00
1ae944c071
Use SIGUSR2 for vt switching instead of SIGUSR1
...
Xwayland uses SIGUSR1 to signal readiness.
With direct(-freebsd) session and Xwayland, wlroots was confusing the
Xwayland readiness signal with a vt switch signal, freezing the desktop.
Same problem was found in Weston in 2014:
https://phabricator.freedesktop.org/T7080
2017-11-22 16:29:31 +03:00
016744ef4d
Refactor wlr_list inside wlroots
2017-11-19 00:17:40 +01:00
f61986e8db
rename touch slot to touch id
2017-11-16 17:53:52 -05:00
900d9dc05e
Merge pull request #422 from emersion/scan-build-fixes
...
Fix a bunch of mistakes detected with scan-build
2017-11-16 06:54:49 -05:00
bb79ada49f
Fix a bunch of mistakes detected with scan-build
2017-11-16 10:30:54 +01:00
7d847efe40
Terminate local display on remote X11 server error
2017-11-16 09:38:24 +01:00
73c48f2f35
Terminate local display on remote Wayland display error
2017-11-16 09:33:47 +01:00
09279b90a6
Add wlr_output.serial
2017-11-11 19:09:34 +01:00
f092a37955
Fix typos
2017-11-11 00:45:52 +01:00
5f3b27347c
Merge pull request #404 from emolitor/CPP-Compatibility
...
Remove VLA from session.h
2017-11-10 10:18:43 -05:00
5be11a5c95
Remove VLA from session.h
...
VLAs are optional C11 features and not supported by C++.
2017-11-10 15:12:00 +00:00
66587eb430
Merge remote-tracking branch 'origin/master' into hidpi
2017-11-09 08:36:27 -05:00
1cee782fec
Fix pointer axis delta in Wayland backend
2017-11-05 13:00:27 +01:00
2f6cfe4057
Fix software cursors on scaled outputs
...
There was an issue where it would only work within the boundaries of the
unscaled resolution.
2017-11-04 11:47:34 -04:00
6d8e1abfc0
Improve input sensitivity
...
We now use doubles until the last minute, which makes it so we can move
the pointer more precisely. This also includes a fix for tablet tools,
which move absolutely and sometimes do not update the X or Y axis.
2017-11-04 01:35:12 -04:00
b53db8c39e
libinput backend destroy: fix small leak
2017-11-01 21:14:23 +01:00
844b166c1b
multi_backend_destroy: fix trivial use-after-free
2017-11-01 21:14:23 +01:00
43cd3c7aea
Indentation fix
...
Some space sneaked in. tabtabtab.
2017-11-01 20:14:52 +01:00
e3ee2cd9c7
rootston exit: fix libinput destroy
...
The wlr_list -> wl_list rework changed 'wlr_devices' to
wl_list, but missed its use on destroy.
2017-11-01 19:37:35 +01:00
f451ea3639
rootston exit: fix drm destroy
...
wlr_drm_connector were being freed without removing them
from the drm->outputs list, segfaulting on destroy
2017-11-01 19:37:35 +01:00
a15b35aa10
Remove mysterious hotspot switch in DRM backend
2017-11-01 14:36:58 +01:00
60c018c017
Fix hidden software cursors, fix cursor transformations on DRM backend
2017-11-01 14:25:41 +01:00
0beae99188
Apply output transformation to pointer events in Wayland backend
2017-11-01 11:00:27 +01:00
ec22fe7134
Make wlr_output_interface.enable optional
2017-10-31 15:19:55 +01:00
2c63aa2056
Destroy x11 output with backend
2017-10-31 14:21:12 +01:00
c3b09f73da
Fix cursor hotspot with rotated outputs on DRM backend
2017-10-31 12:30:57 +01:00
95566c6bdf
Transform cursor hotspot, fix wayland cursor hotspot
2017-10-31 12:30:56 +01:00
6656e25fd4
Transform cursor hotspot
2017-10-31 12:30:56 +01:00
1b6c729360
Add wlr_output_cursor
2017-10-31 12:30:03 +01:00
9cc5166905
bug: free x11 backend output in destroy
2017-10-30 19:23:24 -04:00
875a5b446f
remove time usec
2017-10-30 15:43:06 -04:00
a224e74fad
refactor input time_sec to time_msec
2017-10-30 06:40:06 -04:00
fa9c6ecc53
Fix segfault in DRM cursor
2017-10-28 15:09:38 -04:00
9d587d759f
Do not set hw cursor if disabled when switching VT
2017-10-26 18:58:44 +02:00
eea532911a
Send output current mode when changed
2017-10-23 21:03:00 +02:00
75f0a6c998
Merge pull request #286 from versusvoid/update-connector-crtc-bindings
...
Update Connector-CRTC bindings after resume in DRM backend
2017-10-23 20:25:40 +13:00
3ed3271b98
Rescan connectors on DRM resume
2017-10-22 21:44:24 +00:00
549777ca19
Set crtc field when scanning for DRM connectors
...
and always use it when matching CRTCs with connectors.
Fix deactivated monitors check.
2017-10-22 21:38:30 +00:00
3c31209a97
Reinitialize only changed DRM outputs after setting mode on one
2017-10-22 21:34:56 +00:00
ecb2a2b0d3
Emit output resolution event only when resolution changes
2017-10-22 21:34:56 +00:00
1cc8f21d8e
Cleanup wlr_gamma_control
2017-10-22 23:11:26 +02:00
e1d213fccd
Create globals only for enabled outputs in DRM backend
2017-10-22 22:21:23 +02:00
c5fff08f8a
Forgot to rename these
2017-10-22 10:56:40 -04:00
2ab080e79a
Fix index computation in DRM output scan and CRTC match
2017-10-22 10:54:09 +00:00
16f35ecbea
Merge branch 'master' into heghe/wl_list
2017-10-21 22:03:48 -04:00
169b68b17c
Rename remaining refs to wlr_list
2017-10-21 22:02:36 -04:00
24ae081001
Merge pull request #308 from ascent12/render-fixups
...
Render fixups
2017-10-21 18:08:58 -04:00
bdeffad7e5
Remove drm field from wlr_drm_connector
2017-10-22 10:36:07 +13:00
822a9f65a4
Add pointer to backend inside wlr_output
2017-10-22 10:36:07 +13:00
4ea84c5765
Remove unnecesary wlr_renderers
2017-10-22 10:36:07 +13:00
9b984253e2
Move egl.h to render/egl.h
2017-10-22 10:36:07 +13:00
c8570d0e42
Remove wl_list_init when using wl_signal_add
2017-10-21 12:35:51 +02:00
d3f0878d71
Replace list_t with wl_list in wlr_wl_backend
...
Now wlr_backend->outputs is a list of wlr_wl_backend_output instead of
wlr_output.
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 19:44:59 +03:00
e1f196a3e9
Replace list_t with wl_list for wlr_input_device
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:50:43 +03:00
1d716241af
Replace list_t with wl_list in wlr_output
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:46:09 +03:00
c03e774636
Replace list_t with wl_list in wlr_drm_backend
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:46:03 +03:00
bde25fe020
Replace list_t with wl_list in wlr_multi_backend
...
Signed-off-by: Heghedus Razvan <heghedus.razvan@gmail.com>
2017-10-20 11:45:31 +03:00
8c5a110d4c
Fix hidden cursor on wayland backend
2017-10-18 19:14:16 +02:00
62371a9974
Merge pull request #257 from emersion/fix-client-cursors
...
[WIP] Fix client cursors
2017-10-17 09:22:43 -04:00
7cdc19d57f
Fix duplicated pointer axis events
...
In pointer.c, some axis event was emitted even if the event pointer did not have
current axis.
In X11 backend pointer scroll events seem to be composed of both BUTTON_PRESS
and BUTTON_RELEASE. Therefore we should skip one of them (RELEASE) to avoid
event duplication.
2017-10-14 07:29:23 +02:00
19860c03f7
Better handling of hidden cursors in wayland backend, add TODOs
2017-10-12 13:25:29 +02:00
92daa790bb
Allow to update the cursor hotspot without its pixels
2017-10-12 09:40:51 +02:00
a5fe9aa736
Add FreeBSD compatibility
2017-10-11 00:07:21 +03:00
9b83caa658
Add wlr_output_set_cursor_surface
2017-10-08 21:21:06 +02:00
1908d88fab
Merge pull request #236 from ascent12/gl-loader
...
Add GL/EGL extension loader generator
2017-10-08 10:04:33 -04:00
2f36e78de1
Merge pull request #240 from acrisci/feature/x11-backend-axis
...
x11-backend: axis events
2017-10-08 10:01:22 -04:00
2f2392c39e
x11-backend: create wlr output global
2017-10-08 09:53:53 -04:00
6d9b4f330e
x11-backend: axis events
2017-10-08 09:28:23 -04:00
c0e5feea37
Add GL/EGL extension loader generator
2017-10-08 13:23:41 +13:00
4f848000af
Merge branch 'master' into feature/xdg-popup
2017-10-07 13:04:04 -04:00
08ccc7f653
Merge pull request #221 from versusvoid/wayland-xkb_state_update_mask
...
Use xkb_state_update_mask() with Wayland backend
2017-10-06 15:16:10 -04:00
568b270cdf
Use xkb_state_update_mask() with Wayland backend
...
Fix #158
2017-10-06 22:02:29 +00:00
4657f10dd2
Merge branch 'master' into feature/xdg-popup
2017-10-06 07:04:27 -04:00
641d08ce7e
Transform hotspot with cursor
...
Fix #188
2017-10-06 09:07:08 +03:00
7b697fe841
bug: fix x11 event time
2017-10-05 14:38:12 -04:00
c5df6ca900
Fix memory leaks
2017-10-05 20:01:56 +00:00
9ec9edc40d
Check for fd failure properly
2017-10-02 22:01:09 +13:00
6cfe47d1d8
Add explicitly picking GPUs with environment var
2017-10-02 21:57:14 +13:00
f193623ca1
Change iface prefix to suffix
2017-10-02 21:44:33 +13:00
f6f9c40965
Minor fixes
2017-10-01 22:44:24 +13:00
009c3747a8
Multi-GPU DRM
2017-10-01 22:29:25 +13:00
fa3d0ed929
Change wlr_session to open every GPU
2017-10-01 16:47:05 +13:00
eaef028976
Add renderer pointer inside drm_surface
2017-10-01 15:55:25 +13:00
4101b89700
Rename wlr_drm_output to wlr_drm_connector
2017-09-30 23:31:08 +13:00
22e77d9195
Rename backend to drm
2017-09-30 22:22:26 +13:00
ec5b95e08f
Add pointer to backend from DRM outputs
2017-09-30 22:01:59 +13:00
096249a2a1
Split DRM rendering to its own file
2017-09-30 20:52:58 +13:00
d0708b1a3a
Split DRM internal interface to its own header
2017-09-30 19:11:41 +13:00
610b0493ac
Rename files to remove pointless drm prefix
2017-09-30 19:03:34 +13:00
c8a8ff66f2
Removed unused fields
2017-09-30 18:53:05 +13:00
1b18b0a27d
Fix time and transform
2017-09-29 16:31:04 +13:00
68c3806377
Remove unused device interfaces
2017-09-29 16:24:01 +13:00
5ca9a5c083
Remove dead code
2017-09-29 16:20:35 +13:00
abe549e01d
Cleanup x11 event handler
2017-09-29 16:15:09 +13:00
22d5652599
Don't ask for frame immediately after starting
2017-09-29 16:15:09 +13:00
6bf508df81
Add closing with WM button
2017-09-29 16:15:09 +13:00
ce76cfba0f
Add window resizing
2017-09-29 16:15:09 +13:00
e00b4455fe
Add pointer motion
2017-09-29 16:15:09 +13:00
fc0e45f2ee
Add mouse button presses
2017-09-29 16:15:09 +13:00
8027232ae5
Add timer for rendering loop
2017-09-29 16:15:09 +13:00
38bc0ab1cc
Fix keycodes
2017-09-29 16:15:09 +13:00
9ca5b0cae8
Add basic input
2017-09-29 16:15:09 +13:00
3a5b150df2
Basic rendering
2017-09-29 16:15:09 +13:00
bbe90d41bb
Add EGL for X11
2017-09-29 16:15:09 +13:00
517ba0bc16
Change egl_get_config to always use visual id
2017-09-29 16:15:09 +13:00
7ad2a57feb
Open X11 Window
2017-09-29 16:12:13 +13:00
a598e6d026
Add X11 backend skeleton
2017-09-29 16:12:13 +13:00
0f56326cb8
fix libinput wlr-keyboard use after free
2017-09-28 20:29:26 -04:00
7cf4ee128e
Merge remote-tracking branch 'origin/master' into rootston
2017-09-27 20:25:34 -04:00
d7d73cd298
Merge pull request #144 from ascent12/drm-dp-mst
...
DisplayPort MST
2017-09-27 07:58:01 -04:00
61e451ea1b
Move keyboard logic to wlr_{keyboard,seat}
2017-09-24 14:12:56 -04:00
c8c5aedaa2
Add error checking to DRM legacy
2017-09-24 12:19:49 +13:00
419400ae00
Send failure code on partial atomic commit
2017-09-24 12:09:17 +13:00
a466c86fba
Set state properly
2017-09-24 12:06:00 +13:00
0699aa62d8
Initial pass on roots_input
2017-09-23 10:13:05 -04:00
db5e9385d4
Simplify retry_pageflip
2017-09-23 18:44:39 +12:00
025b3ee515
Add error recovery for failed page flips
2017-09-23 18:27:14 +12:00
459d138fa2
Add timeout to DRM cleanup
...
This prevents a potential infinite loop preventing us from closing
properly.
2017-09-23 16:32:25 +12:00
b6d7c3ed8e
Initialize display, backend; add frame handling
2017-09-23 00:30:39 -04:00
8cbade355f
Print connector name on atomic commit failure
2017-09-23 13:38:43 +12:00
4a53aab466
Allow forcing legacy DRM interface
2017-09-23 13:20:17 +12:00
175f89f4ff
Add elogind support
...
Resolves SirCmpwn/wlroots#146
2017-09-22 12:02:55 -05:00
9fa822c666
Fix minor typos
2017-09-17 18:29:52 -04:00
1682c0d983
Remove non-blocking flag on modesetting commits
...
This seems to make hotplugging DisplayPort MST connectors more reliable.
2017-09-10 00:13:39 +12:00
6717b78bd6
Retry atomic commit on failure
...
So we don't lose any previously "good" properties that were set.
2017-09-09 23:10:18 +12:00
0aa00da1f3
Check for disappearing DRM connectors
...
DisplayPort MST connectors will disappear when they're disconnected, so
we need to check for that.
2017-09-09 23:09:51 +12:00
6f98b5a337
Add set_gamma and get_gamma_size to wlr_output_impl
2017-09-06 18:53:08 +02:00
368f74e4df
Refactor meson build files
...
Use tabs for indentation and break up function calls over 80 col.
2017-08-30 14:30:47 -04:00
6daf9e9ab2
Merge pull request #120 from acrisci/feature/wlr-cursor
...
wlr_cursor
2017-08-29 12:12:18 -05:00
df0ee7f25f
implement tablet tool devices
2017-08-28 10:23:14 -04:00
c914697676
add device to touch events
2017-08-27 11:44:55 -04:00
98f4cdfccb
implement wlr_cursor_map_input_to_output
2017-08-26 08:32:11 -04:00
e3d47376dc
add wlr_cursor basic implementation
2017-08-26 08:32:11 -04:00
d16b2977f6
Remove single GPU assumptions from wlr_session
2017-08-26 14:50:16 +12:00
fb93628bda
Merge wlr_udev into wlr_session
2017-08-26 14:02:04 +12:00
46823152ea
Rename functions to be consistent with #93
2017-08-26 11:56:43 +12:00
062d923b0a
wayland backend: wl_event_source_remove on destroy
2017-08-19 09:31:06 +02:00
f24b3df980
wlr renderer/texture: rename init to create when it does alloc
2017-08-19 08:33:31 +02:00
12782eabfe
libinput: wl_event_source_remove on destroy
2017-08-19 08:33:31 +02:00
58efb8f90a
wayland backend: remove explicit scale = 1
...
This is now set correctly in the wlr_output init
2017-08-19 07:38:45 +02:00
0252c8e072
drm realloc_crtcs: check we found an output
...
This follows-up on #105 that just initialized to 0.
Instead, make sure we actually found an output that matches
2017-08-18 18:27:59 +02:00
784cf65635
fix uninitialized warning
...
`index` might be uninitialized. Warning can be produced with gcc and `-01` flag.
2017-08-18 12:08:28 -04:00
e2e149784b
wayland backend: fix xdg-shell for weston
...
- xdg toplevel configure can be called with 0 width/height,
in that case we are free to do as we like (so do nothing)
- need a display roundtrip after everything is setup but before
we start attaching buffers to the surface
2017-08-17 10:36:43 +02:00
3377e5e4f2
wayland backend: fix xdg-shell for gnome
...
Calling wl_surface_commit after setting up the xdg_toplevel is
apparently good enough for them.
Still missing something for weston.
2017-08-17 10:24:27 +02:00
fb05923eaa
wayland backend: Fix shell title/app_id to wlroots
2017-08-17 10:24:27 +02:00
4f3d21c3ff
wayland output: add error handling for xdg shell
...
Note that this does not go on to the next backend, because
attempt_wl_backend does not check if we have any output created.
We cannot test simply because (right now) a run of our examples will go
in this function twice, the first of which will (rightly?) return no
display but needs to return backend creation success.
2017-08-17 10:24:27 +02:00
577d2f6fcd
wayland backend: switch to xdg shell
...
Closes #72 and #96 .
2017-08-17 10:24:27 +02:00
e7fa4f12e1
Fix DRM problem introduced in 901c14c
2017-08-16 17:36:57 -04:00
beb84940cf
Improve no device detection support
2017-08-16 07:24:46 -04:00
3ac10a81bd
Merge pull request #94 from martinetd/libinput_no_device
...
libinput: fail if no input found on init
2017-08-16 07:22:36 -04:00
901c14c409
Prevent alloc errors from crashing in `list_t`
...
This commit changes the `list_t` api so that alloc errors can be
detected and worked around. Also fixes errors not found in 5cc7342
2017-08-16 09:23:21 +02:00
880c239657
libinput: fail if no input found on init
...
This runs through events pending at init on initialization so we can
tell if some devices are available.
Note that with the way wlr_device_lists is managed, this checks that
there is at least one device we handle - it doesn't have to be a
keyboard, but there is at least a mouse or tablet_pad or something
that we care about.
Instead of failing inconditionally it might be better to leave the
decision to the user, e.g. add a "backend_has_devices" function to
call later.
(Tested by moving /dev/input off)
Fixes #24 .
2017-08-16 09:18:12 +02:00
27c13d621d
Merge pull request #88 from 4e554c4c/alloc_crashing
...
Prevent alloc errors from crashing
2017-08-15 12:21:58 -04:00
d2e796edb7
Merge pull request #86 from nyorain/master
...
Fix style issues
2017-08-15 07:18:22 -04:00
5cc7342606
Prevent alloc errors from crashing
...
Resolves #76
2017-08-15 08:04:57 +02:00
d7dcbbc175
Add wayland backend cursor support
2017-08-14 18:02:05 -04:00
f998bb8299
Fix style issues
2017-08-14 17:09:56 +02:00
e922e62924
wayland input_device_destroy: add missing braces
2017-08-14 16:30:10 +02:00
4bbf718e7d
impl->destroy cleanup:
...
- remove trivial destroy() function
- make sure we check impl and impl->destroy before calling
- always call free if not implemented
2017-08-14 16:22:31 +02:00
ba20d5b3ca
Refactor out wlr_touch_state
2017-08-14 16:22:31 +02:00
bd67849c03
Refactor out wlr_tablet_tool_state
2017-08-14 16:22:31 +02:00
a289940bff
Refactor out wlr_tablet_pad_state
2017-08-14 16:22:31 +02:00
53e7bebd23
Refactor out wlr_pointer_state
2017-08-14 16:22:31 +02:00
0a3246ad97
Refactor out wlr_keyboard_state
2017-08-14 16:22:31 +02:00
e6ad67911b
Refactor out wlr_input_device_state
2017-08-14 16:22:31 +02:00
9a9dd15d5f
Fix wlr_multi_backend_add incorrect assert
2017-08-14 15:01:59 +02:00
c8c6619146
Refactor out wlr_output_mode_state
2017-08-14 08:03:51 -04:00
de66bdb867
Add backend detection functions
...
Resolves #80
2017-08-13 23:08:33 +02:00
41e735242d
Remove wlr_output_state, update backends
2017-08-13 11:38:03 -04:00
4386816889
wlr_backend_init -> wlr_backend_start
...
Also renames create to init. We'll use create for anything that
allocates and init for anything that takes a pointer and initializes it.
2017-08-13 10:19:57 -04:00
43fb40e949
Merge pull request #79 from martinetd/libinput_renaming
...
Libinput renaming
2017-08-13 08:29:42 -04:00
e6a7817e45
Fix build on systems without systemd
2017-08-13 08:21:57 -04:00
5c82d2f5c3
libinput backend: massive renaming
...
- 'libinput' (backend's) to libinput_context
- 'device' (libinput_device) to libinput_dev
- 'dev' (wlr_device) to wlr_dev
- 'devices' lists tangling of libinput devices to wlr_devices
- 'devices' list of wlr_devices in backend state to wlr_device_lists
2017-08-13 08:18:05 +02:00
08a2afdf6f
libinput backend: match logging for removal and add
...
Only log removal of devices once, but also log it for devices
that we do not care about.
2017-08-13 08:09:11 +02:00
701e147b9b
libinput: remove useless get_context call
...
That function is literally just "return event->device->seat->libinput"
We do not use context, so do not fetch it.
2017-08-13 08:07:44 +02:00
f2e2794365
wayland backend: do not watch wayland fd for writable
...
Wayland fd is always writable and will busy-loop.
The dispatch function gets called with 0-mask when we need to flush
display anyway, so this saves CPU at no visible impact.
2017-08-13 07:53:33 +02:00
60d1131df2
Re-enable backend autoselection
2017-08-12 19:56:55 -04:00
234b2104e4
Refactor wlr_backend_state out of DRM backend
2017-08-12 19:52:22 -04:00
c95a108d2f
Update libinput backend with new state design
2017-08-12 13:51:47 -04:00
81cd90297d
Refactor out wlr_backend_state from wl/multi
2017-08-12 11:43:36 -04:00
3e2cb5b5cf
libinput: fix segfault when handling non-wlr device removal
2017-08-12 15:13:29 +02:00
3ea878b76e
wayland backend: free seatName
2017-08-12 01:19:45 +02:00
8427749dd0
wayland backend: emit signal for input/output removal
2017-08-12 01:16:12 +02:00
de86965174
Use libinput_event_destroy/xkb_*_unref
...
Also sneak in a missing drmModeFreePlaneResources
2017-08-12 00:11:18 +02:00
e1293a7853
libinput: signal input remove on libinput backend destroy
...
This lets the upper crust cleanup and free their own states
2017-08-12 00:11:18 +02:00
be3a0ad065
libinput backend: fill in handle_device_removed
...
And fix input_remove_notify accordingly
2017-08-12 00:11:18 +02:00
c42674bc25
Fix libinput destroy for devices with multiple capabilities
2017-08-11 21:02:40 +02:00
0354aaeff2
Complete a few destroy functions
...
This adds missing free calls for:
- drm outputs
- libinput backend in general
- final udev free
- output mode state
2017-08-11 19:17:03 +02:00
0663b6d1e1
Build libinput events on the stack instead of allocating
2017-08-11 18:38:27 +02:00
62d8b252c0
Refactor meson and move xdg-shell into wlroots
2017-08-11 09:37:09 -04:00
6569c2b626
Merge pull request #53 from nyorain/drm_buffer
...
Implement drm (egl) buffer attaching
2017-08-10 22:20:21 -04:00
c24351681f
Refactor EGL handling
2017-08-10 22:15:37 -04:00
fe2fbd0fad
Fix possible use of CRTC after monitor is unplugged
2017-08-11 11:12:41 +12:00
4aaf76cb66
wlr_output_update_matrix during wl backend init
2017-08-10 13:27:14 -04:00
073dff63da
Fix style issues
2017-08-10 11:05:18 +02:00
67369173aa
Implement drm (egl) buffer attaching
2017-08-10 10:59:58 +02:00
a77fac0760
Added null check on crtc
2017-08-10 01:43:42 +12:00
af67966d92
Atomic modesetting
2017-08-09 08:07:00 -04:00
e167f41fde
Rename wlr_surface -> wlr_texture; attach -> upload
2017-08-08 18:25:16 +02:00
d09ca20a4d
Use gbm_bo_map for cursor
2017-08-07 21:07:42 +12:00
dbe66d1963
Style changes
2017-08-07 10:15:05 +12:00
5f7042a1f2
Moved headers
2017-08-06 21:49:04 +12:00
d307c2f2c2
Renamed some variables to be less generic
2017-08-06 21:42:36 +12:00
1db97a9af9
Updated DRM cursor rendering
2017-08-06 21:38:40 +12:00
aedfa27d3a
Clean up resources when plane is reassigned
2017-08-06 15:54:38 +12:00
2f8b5c4448
More cleanups
2017-08-06 15:53:41 +12:00
dd7a349295
Various cleanups
2017-08-06 15:51:49 +12:00
d1ca1ec16e
Split off some functions into drm-util
2017-08-06 15:51:49 +12:00
c46605d605
Use plane for rendering
2017-08-06 15:50:23 +12:00
e16c5504cd
Add planes.
2017-08-06 15:49:05 +12:00
67b51f0922
Upgraded CRTC and Encoder matching
2017-08-06 15:49:05 +12:00
31867a1b2e
Various changes/cleanups
2017-08-06 15:49:05 +12:00
7b772e1a4b
DRM resource initalisation
2017-08-06 15:49:02 +12:00
601bbad5d8
Added DRM property infrastructure
2017-08-06 15:47:00 +12:00
5bf61ca7ed
Check for multi backend before using it
2017-08-05 23:08:35 -04:00
f1a069d50d
Log that the X11 backend is unimplemented
2017-08-05 23:03:56 -04:00
4d4da18437
Fixed VT switching
2017-08-06 13:37:49 +12:00
3373ec5fc8
Update build files
2017-08-06 13:30:18 +12:00
cb4d50e22c
Changed header paths.
2017-08-06 13:25:26 +12:00
2ae5cd6539
Moved session/ into backend/
2017-08-06 13:25:26 +12:00
ae4478e17f
Changed ownership of wlr_session to the multi backend.
...
Currently breaks VT switching for examples.
2017-08-06 13:25:26 +12:00
fdab81e1c9
Use meson build system
2017-08-05 22:34:24 +02:00
d822e0768b
Use ARGB8888 pixel format for cursor bo
...
The previous pixel format (RGBA8888) is not supported on all devices for cursors.
Weston uses ARGB8888 exclusively for its cursor buffer object which leads me to
believe this pixel format is better supported.
2017-07-27 17:55:35 -04:00
8b6dc48355
bugfix: add null check on output gbm on pageflip
...
The gbm for the output might be null for the pageflip in the case that
the output has been disconnected. The gbm might be set to null by
wlr_drm_output_cleanup() in this case.
If the output is cleaned up before the pageflip, then a double free
will crash the compositor on the call to gbm_surface_release_buffer()
in the pageflip handler. The outputs buffer object bo[1] will point to
invalid memory.
2017-07-24 19:50:13 -04:00
b08aa9fd35
Revert "Merge pull request #27 from ascent12/meson"
...
This reverts commit 85805da0218189c64d7f
2017-07-11 22:16:56 -04:00
a2ba226ba3
Use subdir
2017-07-11 09:56:54 +12:00
924bf0f669
Changed build system to meson
2017-07-11 00:28:56 +12:00
97f6e9b69a
Remove excessive logging in wayland backend
2017-06-28 16:35:18 -04:00
97213cc00e
Add new interfaces to wayland backend
2017-06-26 18:23:38 -04:00
038dfdbc85
Log max cursor size on error
2017-06-26 10:34:26 -04:00
82322d81a7
Hardware cursor improvements.
2017-06-26 19:32:36 +12:00
0cd94f0cf0
Added software cursor fallback
2017-06-26 17:34:15 +12:00
b18209c904
Switch to GLES2
...
Closes #13
2017-06-23 11:38:45 -04:00
168f0955ab
Add wl_output globals for wlr_outputs
2017-06-22 14:27:35 -04:00
4ca872c914
Improve wayland backend pointer error logging
2017-06-22 18:04:13 +02:00
dbde1f7340
Store wayland backend axis source
2017-06-22 17:58:53 +02:00
272030652a
Implement absolute motion events for wayland
2017-06-22 17:55:00 +02:00
d26a9ba968
Fix pointer motion coords
2017-06-22 17:12:09 +02:00
c1520077b6
Implement wayland backend input events
2017-06-22 16:53:48 +02:00
0b8e6cccc8
Add wayland input listener skeletons
2017-06-22 15:41:59 +02:00
3d71969b2a
Make event names consistent
2017-06-21 14:07:09 -04:00
f4453d104d
Reorganize wlr-common
2017-06-21 12:10:07 -04:00
fd91244e83
Update everyone to use new headers
2017-06-21 10:27:45 -04:00
55854565dc
Fixed VT switching
2017-06-21 13:31:29 +12:00
091de12bf4
Changed session signal to only emit on DRM changes
2017-06-21 12:47:53 +12:00
c2d0090ad7
Support multiple wl backend outputs
2017-06-20 18:22:21 -04:00
b2bf5b23b9
Implement output_transform for wl backend
2017-06-20 18:02:00 -04:00
b9d36c8149
Add dynamic output resizing for Wayland backend
...
This allows outputs to:
- Not support modesetting
- Resize themselves
2017-06-20 17:51:45 -04:00
c9d5a0b2fb
Clean up Wayland backend GL context and such
2017-06-20 15:29:27 -04:00
51f35e7af0
Cleanup some leaks/incorrect destructions
2017-06-20 19:01:20 +02:00
500e9184f1
Fix egl workaround; Test with weston
2017-06-20 18:44:11 +02:00
50ce35e9da
Implement wayland backend output
2017-06-20 18:27:05 +02:00
62b1421635
Make egl_error function part of the egl interface
...
The function may be useful for backends using egl.
2017-06-20 18:26:29 +02:00
e22626ef6a
Adapt codestyle
2017-06-19 22:39:20 +02:00
792d535225
Rework wayland backend output implementation
2017-06-19 22:36:40 +02:00
e65ca967f9
Merge branch 'master' into wayland-backend
2017-06-19 21:22:42 +02:00
632a04f1b7
Implement keyboard LEDs
2017-06-19 15:15:37 -04:00
ecb04afcad
Implement tablet pads
2017-06-19 14:49:07 -04:00
e9609e9adf
Allocate framebuffers for hardware cursors
...
Still doesn't fix cursors though
2017-06-19 14:02:25 -04:00
10526de444
Fix furhter wayland backend issues
2017-06-19 19:40:58 +02:00
8fbf1ca3ff
Continue wayland backend update
...
Update wayland backend to new api.
Start to use the input interfaces.
Compiling now, not tested.
2017-06-19 19:05:10 +02:00
41a477375c
Merge branch 'libinput' into wayland-backend
2017-06-19 17:49:26 +02:00
904739c405
Start to fix wayland backend
...
Starts to update the wayland backend to the new backend api.
Not yet updated to libinput branch (not yet compiling).
2017-06-19 17:46:50 +02:00
7e038a6110
Add (broken) DRM hardware cursors
2017-06-16 15:38:34 -04:00
def3d7c64f
Add tablet example
2017-06-15 16:15:12 -04:00
4a9966b1a4
Implement wlr_tablet_tool
2017-06-15 14:32:53 -04:00
e65f83d7f2
Add more DRM info to wlr_output
...
Yes I know this is the libinput branch, I thought this would be useful
for a libinput feature (but it wasn't)
2017-06-14 16:17:05 -04:00
3f24f8a1be
Flesh out touch events and add demo
2017-06-14 14:50:09 -04:00
d6905f86cb
Allocate wlr_touch devices
2017-06-14 11:40:03 -04:00
a63230e59c
Implement libinput wlr_pointer
2017-06-13 11:05:45 -04:00
e257afeb7e
Establish multi backend support
2017-06-13 08:10:36 -04:00
5dd96c0772
Incorporate XKBCommon into example
2017-06-13 08:10:36 -04:00
508d135de7
Only allocate device state when it will be used
...
This design also avoids double frees in the future when we're creating
several wlr_input_devices from one libinput_device.
2017-06-13 08:10:36 -04:00
7a5f35b5bb
Reassign ownership of libinput handle
2017-06-13 08:10:36 -04:00
f479b7c8c7
Split keyboard code out into its own file
2017-06-13 08:10:36 -04:00
59ceaf507e
Handle key presses
2017-06-13 08:10:36 -04:00
0e75d157f5
Initialize keyboards from libinput
2017-06-13 08:10:36 -04:00
019fff06be
Fix issues, flesh out event handling somewhat
2017-06-13 08:10:36 -04:00
af69591e62
Add error handling and init in backend_autocreate
2017-06-13 08:10:36 -04:00
1262f1400c
Initial pass on libinput backend
2017-06-13 08:10:22 -04:00
325a331425
Fix some build errors
2017-06-12 22:45:25 -04:00
2b06f88f0b
Combine internal DRM headers into one
...
Everything always just included both anyway
2017-06-10 12:30:02 -04:00
63c3faa006
Fixed rendering bug: Delay calling gbm_surface_release_buffer until it
...
has been scanned out.
2017-06-09 17:15:55 +12:00
382f712792
Merge remote-tracking branch 'upstream/master' into rotation
2017-06-08 00:52:33 +12:00
632a7acb03
Filled out more wlr_output fields.
2017-06-08 00:39:40 +12:00
6f5c70ac69
Let backend track transform state
...
This will be necessary to provide it to clients via wl_output.
2017-06-06 11:48:30 -04:00
c97de93fe1
Added output rotation example
2017-06-05 22:48:51 +12:00
7d82476590
Refactor type implementations
2017-06-04 19:30:50 -04:00
5df56653ab
Changed invalidate interface.
2017-06-04 17:43:34 +12:00
de44994dfc
Udev event device matching
2017-06-03 15:47:33 +12:00
40b85d992a
Refactor udev and drm initialization
2017-06-01 20:29:10 -04:00
62d612a01e
Merge branch 'master' into session
2017-06-01 23:10:19 +12:00
ae77004346
Add more logging around udev
2017-05-31 16:53:59 -04:00
e2ee67125e
s/wayland.h/types.h/g
2017-05-31 16:24:32 -04:00
c7f6981d9c
Clean up outputs on exit
2017-05-31 16:17:04 -04:00
579909a368
Promote types to a standalone subproject
2017-05-31 15:43:13 -04:00
fee409bd0a
Generalize DPMS, remove DRM refs from example
2017-05-31 15:38:26 -04:00
03c9b46034
Have backend manage opengl context
2017-05-31 15:15:42 -04:00
f9d363fece
Added device matching
2017-05-14 13:07:34 +12:00
7efdd3c9fc
Refactored renderer startup to function.
2017-05-14 12:48:47 +12:00
ce8786721b
Got it working.
2017-05-14 12:42:49 +12:00
058b8bdf27
Working commit
2017-05-14 12:42:49 +12:00
409065ba2e
Changed to signed
2017-05-14 01:26:43 +12:00
eac603bfdf
Merge branch 'master' into refresh
2017-05-14 01:24:09 +12:00
3000b8615f
More accurate refresh rates (mHz)
2017-05-13 22:27:25 +12:00
599d1bcbdc
DPMS support
2017-05-13 20:37:15 +12:00
42878b45a1
Remove unnecessary TODO
2017-05-10 10:36:37 -04:00
00931f2f8f
Generalize output handling
2017-05-07 12:26:48 -04:00
15b1ce9e6c
Refactor backend state management
2017-05-07 10:12:54 -04:00
7e9feb70a0
Fixed hotplugging + make EGL more chatty.
2017-05-04 21:58:11 +12:00
ef9768858e
Changed modesetting interface.
2017-05-03 22:41:49 +12:00
d196a79b6c
Changed backend to accept wl_display.
2017-05-03 21:28:44 +12:00
18387468bb
Renamed 'wlr_drm_display' to 'wlr_drm_output'
2017-05-03 17:49:03 +12:00
15d247bf34
Changed drm to use new EGL interface.
2017-05-03 17:17:14 +12:00
dbceaee9fa
Added EGL interface for backends.
2017-05-03 17:04:41 +12:00
81998fdc98
Removed old session code from DRM backend.
2017-05-03 16:23:07 +12:00
e446a5300b
Added example.
2017-05-02 18:13:17 +12:00
e9d716fc0c
Changed display to use list_t.
2017-05-02 14:34:33 +12:00
115d4ae637
Changed events to use wayland functions.
2017-05-02 14:08:34 +12:00
562d43a5ec
Changed logging.
2017-05-02 13:00:25 +12:00
41a82fd2fc
Renaming.
2017-05-01 17:49:18 +12:00
9ac46ec5ed
Got it to build
2017-05-01 15:50:19 +12:00
95a553dc51
Moved headers to the correct place.
2017-05-01 15:33:42 +12:00
aca13320b3
Inital commit of libotd.
2017-05-01 15:20:48 +12:00
1aed987301
Add free functions for allocated resources
2017-04-25 21:26:29 -04:00
1e8970b4a9
Flesh out wl_seat and fix some bugs
2017-04-25 19:33:13 -04:00
5ca9d612f4
Flesh out wayland backend registry
2017-04-25 19:19:21 -04:00
de01e654ce
Flesh out wayland backend somewhat, add example
2017-04-25 15:06:58 -04:00
52e6ed54cb
Initial commit
2017-04-25 11:32:52 -04:00
Dominique Martinet
Drew DeVault
Tobias Blass
emersion
Scott Anderson
Ilia Bozhinov
Markus Ongyerth
morganamilo
Guido Günther
Uli Schlachter
Tancredi Orlando
Tony Crisci
Cedric Sodhi
Scott Anderson
Dan Robertson
Rodrigo Lourenço
Vincent Vanlaer
Patrick Steinhardt
Timidger
Johannes Schramm
PoroCYon
Björn Esser
Michael Weiss
n3rdopolis
Moritz
Greg V
Stefano Ragni
Eric Molitor
Versus Void
Heghedus Razvan
D.B
dudemanguy
Calvin Lee
nyorain
Drew DeVault